summaryrefslogtreecommitdiffstats
path: root/arch/m68k/platform/5272/config.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/platform/5272/config.c')
-rw-r--r--arch/m68k/platform/5272/config.c110
1 files changed, 0 insertions, 110 deletions
diff --git a/arch/m68k/platform/5272/config.c b/arch/m68k/platform/5272/config.c
deleted file mode 100644
index e68bc7a..0000000
--- a/arch/m68k/platform/5272/config.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/***************************************************************************/
-
-/*
- * linux/arch/m68knommu/platform/5272/config.c
- *
- * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
- * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/phy.h>
-#include <linux/phy_fixed.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfuart.h>
-
-/***************************************************************************/
-
-/*
- * Some platforms need software versions of the GPIO data registers.
- */
-unsigned short ppdata;
-unsigned char ledbank = 0xff;
-
-/***************************************************************************/
-
-static void __init m5272_uarts_init(void)
-{
- u32 v;
-
- /* Enable the output lines for the serial ports */
- v = readl(MCF_MBAR + MCFSIM_PBCNT);
- v = (v & ~0x000000ff) | 0x00000055;
- writel(v, MCF_MBAR + MCFSIM_PBCNT);
-
- v = readl(MCF_MBAR + MCFSIM_PDCNT);
- v = (v & ~0x000003fc) | 0x000002a8;
- writel(v, MCF_MBAR + MCFSIM_PDCNT);
-}
-
-/***************************************************************************/
-
-static void m5272_cpu_reset(void)
-{
- local_irq_disable();
- /* Set watchdog to reset, and enabled */
- __raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
- __raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
- __raw_writew(0, MCF_MBAR + MCFSIM_WCR);
- for (;;)
- /* wait for watchdog to timeout */;
-}
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
-#if defined (CONFIG_MOD5272)
- volatile unsigned char *pivrp;
-
- /* Set base of device vectors to be 64 */
- pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
- *pivrp = 0x40;
-#endif
-
-#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0004000, size);
- commandp[size-1] = 0;
-#elif defined(CONFIG_CANCam)
- /* Copy command line from FLASH to local buffer... */
- memcpy(commandp, (char *) 0xf0010000, size);
- commandp[size-1] = 0;
-#endif
-
- mach_reset = m5272_cpu_reset;
- mach_sched_init = hw_timer_init;
-}
-
-/***************************************************************************/
-
-/*
- * Some 5272 based boards have the FEC ethernet diectly connected to
- * an ethernet switch. In this case we need to use the fixed phy type,
- * and we need to declare it early in boot.
- */
-static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
- .link = 1,
- .speed = 100,
- .duplex = 0,
-};
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
- m5272_uarts_init();
- fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
- return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/