summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-s3c24xx
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-s3c24xx')
-rw-r--r--arch/arm/plat-s3c24xx/Kconfig57
-rw-r--r--arch/arm/plat-s3c24xx/Makefile19
-rw-r--r--arch/arm/plat-s3c24xx/common-smdk.c207
-rw-r--r--arch/arm/plat-s3c24xx/cpu.c29
-rw-r--r--arch/arm/plat-s3c24xx/dma.c1
-rw-r--r--arch/arm/plat-s3c24xx/pm-simtec.c66
-rw-r--r--arch/arm/plat-s3c24xx/s3c2443-clock.c636
-rw-r--r--arch/arm/plat-s3c24xx/setup-i2c.c27
-rw-r--r--arch/arm/plat-s3c24xx/setup-ts.c34
-rw-r--r--arch/arm/plat-s3c24xx/simtec-audio.c77
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c36
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c38
-rw-r--r--arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c36
13 files changed, 34 insertions, 1229 deletions
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d8973ac46bc..21bf6adb919 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -4,7 +4,7 @@
config PLAT_S3C24XX
bool
- depends on ARCH_S3C2410
+ depends on ARCH_S3C24XX
default y
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
@@ -44,12 +44,6 @@ config S3C2410_CLOCK
Clock code for the S3C2410, and similar processors which
is currently includes the S3C2410, S3C2440, S3C2442.
-config S3C2443_CLOCK
- bool
- help
- Clock code for the S3C2443 and similar processors, which includes
- the S3C2416 and S3C2450.
-
config S3C24XX_DCLK
bool
help
@@ -76,15 +70,9 @@ config S3C24XX_GPIO_EXTRA128
Add an extra 128 gpio numbers to the available GPIO pool. This is
available for boards that need extra gpios for external devices.
-config PM_SIMTEC
- bool
- help
- Common power management code for systems that are
- compatible with the Simtec style of power management
-
-config S3C2410_DMA
+config S3C24XX_DMA
bool "S3C2410 DMA support"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C24XX
select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
@@ -93,31 +81,11 @@ config S3C2410_DMA
config S3C2410_DMA_DEBUG
bool "S3C2410 DMA support debug"
- depends on ARCH_S3C2410 && S3C2410_DMA
+ depends on ARCH_S3C24XX && S3C2410_DMA
help
Enable debugging output for the DMA code. This option sends info
to the kernel log, at priority KERN_DEBUG.
-# SPI default pin configuration code
-
-config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13
- bool
- help
- SPI GPIO configuration code for BUS0 when connected to
- GPE11, GPE12 and GPE13.
-
-config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
- bool
- help
- SPI GPIO configuration code for BUS 1 when connected to
- GPG5, GPG6 and GPG7.
-
-config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
- bool
- help
- SPI GPIO configuration code for BUS 1 when connected to
- GPD8, GPD9 and GPD10.
-
# common code for s3c24xx based machines, such as the SMDKs.
# cpu frequency items common between s3c2410 and s3c2440/s3c2442
@@ -145,21 +113,4 @@ config S3C2412_IOTIMING
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
-config MACH_SMDK
- bool
- help
- Common machine code for SMDK2410 and SMDK2440
-
-config S3C24XX_SIMTEC_AUDIO
- bool
- depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
- default y
- help
- Add audio devices for common Simtec S3C24XX boards
-
-config S3C2410_SETUP_TS
- bool
- help
- Compile in platform device definition for Samsung TouchScreen.
-
endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b2b01125de6..2467b800cc7 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,28 +23,11 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
# Architecture dependent builds
-obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o
-obj-$(CONFIG_S3C2443_CLOCK) += s3c2443-clock.o
-obj-$(CONFIG_S3C2410_DMA) += dma.o
+obj-$(CONFIG_S3C24XX_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
-
-# device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o
-obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
-
-# SPI gpio central GPIO functions
-
-obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
-obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o
-obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o
-
-# machine common support
-
-obj-$(CONFIG_MACH_SMDK) += common-smdk.o
-obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO) += simtec-audio.o
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
deleted file mode 100644
index 084604be6ad..00000000000
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/common-smdk.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Common code for SMDK2410 and SMDK2440 boards
- *
- * http://www.fluff.org/ben/smdk2440/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/leds-gpio.h>
-
-#include <plat/nand.h>
-
-#include <plat/common-smdk.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-#include <plat/pm.h>
-
-/* LED devices */
-
-static struct s3c24xx_led_platdata smdk_pdata_led4 = {
- .gpio = S3C2410_GPF(4),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .name = "led4",
- .def_trigger = "timer",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led5 = {
- .gpio = S3C2410_GPF(5),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .name = "led5",
- .def_trigger = "nand-disk",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led6 = {
- .gpio = S3C2410_GPF(6),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .name = "led6",
-};
-
-static struct s3c24xx_led_platdata smdk_pdata_led7 = {
- .gpio = S3C2410_GPF(7),
- .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
- .name = "led7",
-};
-
-static struct platform_device smdk_led4 = {
- .name = "s3c24xx_led",
- .id = 0,
- .dev = {
- .platform_data = &smdk_pdata_led4,
- },
-};
-
-static struct platform_device smdk_led5 = {
- .name = "s3c24xx_led",
- .id = 1,
- .dev = {
- .platform_data = &smdk_pdata_led5,
- },
-};
-
-static struct platform_device smdk_led6 = {
- .name = "s3c24xx_led",
- .id = 2,
- .dev = {
- .platform_data = &smdk_pdata_led6,
- },
-};
-
-static struct platform_device smdk_led7 = {
- .name = "s3c24xx_led",
- .id = 3,
- .dev = {
- .platform_data = &smdk_pdata_led7,
- },
-};
-
-/* NAND parititon from 2.4.18-swl5 */
-
-static struct mtd_partition smdk_default_nand_part[] = {
- [0] = {
- .name = "Boot Agent",
- .size = SZ_16K,
- .offset = 0,
- },
- [1] = {
- .name = "S3C2410 flash partition 1",
- .offset = 0,
- .size = SZ_2M,
- },
- [2] = {
- .name = "S3C2410 flash partition 2",
- .offset = SZ_4M,
- .size = SZ_4M,
- },
- [3] = {
- .name = "S3C2410 flash partition 3",
- .offset = SZ_8M,
- .size = SZ_2M,
- },
- [4] = {
- .name = "S3C2410 flash partition 4",
- .offset = SZ_1M * 10,
- .size = SZ_4M,
- },
- [5] = {
- .name = "S3C2410 flash partition 5",
- .offset = SZ_1M * 14,
- .size = SZ_1M * 10,
- },
- [6] = {
- .name = "S3C2410 flash partition 6",
- .offset = SZ_1M * 24,
- .size = SZ_1M * 24,
- },
- [7] = {
- .name = "S3C2410 flash partition 7",
- .offset = SZ_1M * 48,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct s3c2410_nand_set smdk_nand_sets[] = {
- [0] = {
- .name = "NAND",
- .nr_chips = 1,
- .nr_partitions = ARRAY_SIZE(smdk_default_nand_part),
- .partitions = smdk_default_nand_part,
- },
-};
-
-/* choose a set of timings which should suit most 512Mbit
- * chips and beyond.
-*/
-
-static struct s3c2410_platform_nand smdk_nand_info = {
- .tacls = 20,
- .twrph0 = 60,
- .twrph1 = 20,
- .nr_sets = ARRAY_SIZE(smdk_nand_sets),
- .sets = smdk_nand_sets,
-};
-
-/* devices we initialise */
-
-static struct platform_device __initdata *smdk_devs[] = {
- &s3c_device_nand,
- &smdk_led4,
- &smdk_led5,
- &smdk_led6,
- &smdk_led7,
-};
-
-void __init smdk_machine_init(void)
-{
- /* Configure the LEDs (even if we have no LED support)*/
-
- s3c_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
- s3c_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
-
- s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
- s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
-
- if (machine_is_smdk2443())
- smdk_nand_info.twrph0 = 50;
-
- s3c_nand_set_platdata(&smdk_nand_info);
-
- platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
-
- s3c_pm_init();
-}
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda8b66..290942d9add 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,8 +32,11 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
+#include <asm/system_info.h>
+#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -190,8 +193,34 @@ static unsigned long s3c24xx_read_idcode_v4(void)
return __raw_readl(S3C2410_GSTATUS1);
}
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
+ arm_pm_idle = s3c24xx_default_idle;
+
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 2bab4c99a23..28f898f7538 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -27,7 +27,6 @@
#include <linux/errno.h>
#include <linux/io.h>
-#include <asm/system.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/dma.h>
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
deleted file mode 100644
index 68296b1fe7e..00000000000
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/pm-simtec.c
- *
- * Copyright 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/
- *
- * Power Management helpers for Simtec S3C24XX implementations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/pm.h>
-
-#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
-
-/* pm_simtec_init
- *
- * enable the power management functions
-*/
-
-static __init int pm_simtec_init(void)
-{
- unsigned long gstatus4;
-
- /* check which machine we are running on */
-
- if (!machine_is_bast() && !machine_is_vr1000() &&
- !machine_is_anubis() && !machine_is_osiris() &&
- !machine_is_aml_m5900())
- return 0;
-
- printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");
-
- gstatus4 = (__raw_readl(S3C2410_BANKCON7) & 0x3) << 30;
- gstatus4 |= (__raw_readl(S3C2410_BANKCON6) & 0x3) << 28;
- gstatus4 |= (__raw_readl(S3C2410_BANKSIZE) & S3C2410_BANKSIZE_MASK);
-
- __raw_writel(gstatus4, S3C2410_GSTATUS4);
-
- return s3c_pm_init();
-}
-
-arch_initcall(pm_simtec_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
deleted file mode 100644
index 95e68190d59..00000000000
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control suport - common code
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/s3c2443.h>
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
- u32 ctrlbit = clk->ctrlbit;
- u32 con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
- return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-struct clk clk_mpllref = {
- .name = "mpllref",
- .parent = &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpllref,
- [2] = &clk_xtal,
- [3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
- .clk = {
- .name = "epllref",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_epllref_sources,
- .nr_sources = ARRAY_SIZE(clk_epllref_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
- [0] = &clk_epllref.clk,
- [1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
- .clk = {
- .name = "esysclk",
- .parent = &clk_epll,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_sysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_sysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
- div &= S3C2443_CLKDIV0_EXTDIV_MASK;
- div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1); /* x2 */
-
- return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
- .name = "mdivclk",
- .parent = &clk_mpllref,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_getrate_mdivclk,
- },
-};
-
-static struct clk *clk_msysclk_sources[] = {
- [0] = &clk_mpllref,
- [1] = &clk_mpll,
- [2] = &clk_mdivclk,
- [3] = &clk_mpllref,
-};
-
-struct clksrc_clk clk_msysclk = {
- .clk = {
- .name = "msysclk",
- .parent = &clk_xtal,
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_msysclk_sources,
- .nr_sources = ARRAY_SIZE(clk_msysclk_sources),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
- clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
- clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
- return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
- .name = "prediv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .get_rate = s3c2443_prediv_getrate,
- },
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned best = 256; /* bigger than any value */
- unsigned div;
- int ptr;
-
- if (!nr_armdiv)
- return -EINVAL;
-
- for (ptr = 0; ptr < nr_armdiv; ptr++) {
- div = armdiv[ptr];
- if (div) {
- /* cpufreq provides 266mhz as 266666000 not 266666666 */
- calc = (parent / div / 1000) * 1000;
- if (calc <= rate && div < best)
- best = div;
- }
- }
-
- return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
- unsigned long rate = clk_get_rate(clk->parent);
- unsigned long clkcon0;
- int val;
-
- if (!nr_armdiv || !armdivmask)
- return -EINVAL;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= armdivmask;
- val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
- return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent = clk_get_rate(clk->parent);
- unsigned long calc;
- unsigned div;
- unsigned best = 256; /* bigger than any value */
- int ptr;
- int val = -1;
-
- if (!nr_armdiv || !armdivmask)
- return -EINVAL;
-
- for (ptr = 0; ptr < nr_armdiv; ptr++) {
- div = armdiv[ptr];
- if (div) {
- /* cpufreq provides 266mhz as 266666000 not 266666666 */
- calc = (parent / div / 1000) * 1000;
- if (calc <= rate && div < best) {
- best = div;
- val = ptr;
- }
- }
- }
-
- if (val >= 0) {
- unsigned long clkcon0;
-
- clkcon0 = __raw_readl(S3C2443_CLKDIV0);
- clkcon0 &= ~armdivmask;
- clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
- __raw_writel(clkcon0, S3C2443_CLKDIV0);
- }
-
- return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
- .name = "armdiv",
- .parent = &clk_msysclk.clk,
- .ops = &(struct clk_ops) {
- .round_rate = s3c2443_armclk_roundrate,
- .get_rate = s3c2443_armclk_getrate,
- .set_rate = s3c2443_armclk_setrate,
- },
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
- [0] = &clk_armdiv,
- [1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
- .clk = {
- .name = "armclk",
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_arm_sources,
- .nr_sources = ARRAY_SIZE(clk_arm_sources),
- },
- .reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
- .clk = {
- .name = "usb-bus-host-parent",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_USBHOST,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
- {
- /* camera interface bus-clock, divided down from esysclk */
- .clk = {
- .name = "camif-upll", /* same as 2440 name */
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_CAMCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
- }, {
- .clk = {
- .name = "display-if",
- .parent = &clk_esysclk.clk,
- .ctrlbit = S3C2443_SCLKCON_DISPCLK,
- .enable = s3c2443_clkcon_enable_s,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
- },
-};
-
-static struct clksrc_clk clk_esys_uart = {
- /* ART baud-rate clock sourced from esysclk via a divisor */
- .clk = {
- .name = "uartclk",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
- .name = "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
- .clk = {
- .name = "i2s-eplldiv",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
- [0] = &clk_i2s_eplldiv.clk,
- [1] = &clk_i2s_ext,
- [2] = &clk_epllref.clk,
- [3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
- .clk = {
- .name = "i2s-if",
- .ctrlbit = S3C2443_SCLKCON_I2SCLK,
- .enable = s3c2443_clkcon_enable_s,
-
- },
- .sources = &(struct clksrc_sources) {
- .sources = clk_i2s_srclist,
- .nr_sources = ARRAY_SIZE(clk_i2s_srclist),
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIS,
- }, {
- .name = "hsspi",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_HSSPI,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_IIC,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "dma",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA0,
- }, {
- .name = "dma",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA1,
- }, {
- .name = "dma",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA2,
- }, {
- .name = "dma",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA3,
- }, {
- .name = "dma",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA4,
- }, {
- .name = "dma",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_DMA5,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_USBD,
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_LCDC,
-
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_PWMT,
- }, {
- .name = "cfc",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_CFC,
- }, {
- .name = "ssmc",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_SSMC,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.0",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.1",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.2",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART2,
- }, {
- .name = "uart",
- .devname = "s3c2440-uart.3",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_UART3,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2443_clkcon_enable_p,
- .ctrlbit = S3C2443_PCLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_WDT,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C2443_PCLKCON_AC97,
- }, {
- .name = "nand",
- .parent = &clk_h,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus_host.clk,
- }
-};
-
-static struct clk hsmmc1_clk = {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
-};
-
-static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
-{
- clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
- return clkcon0 + 1;
-}
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
- unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
- unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
- unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
- struct clk *xtal_clk;
- unsigned long xtal;
- unsigned long pll;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long pclk;
- int ptr;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- pll = get_mpll(mpllcon, xtal);
- clk_msysclk.clk.rate = pll;
-
- fclk = clk_get_rate(&clk_armdiv);
- hclk = s3c2443_prediv_getrate(&clk_prediv);
- hclk /= s3c2443_get_hdiv(clkdiv0);
- pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1);
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-
- printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
- (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
- print_mhz(pll), print_mhz(fclk),
- print_mhz(hclk), print_mhz(pclk));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
- s3c_set_clksrc(&clksrc_clks[ptr], true);
-
- /* ensure usb bus clock is within correct rate of 48MHz */
-
- if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
- printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
- clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
- }
-
- printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
- (epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
- print_mhz(clk_get_rate(&clk_epll)),
- print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
- &clk_prediv,
- &clk_mpllref,
- &clk_mdivclk,
- &clk_ext,
- &clk_epll,
- &clk_usb_bus,
- &clk_armdiv,
- &hsmmc1_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
- &clk_i2s_eplldiv,
- &clk_i2s,
- &clk_usb_bus_host,
- &clk_epllref,
- &clk_esysclk,
- &clk_msysclk,
- &clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
- unsigned int *divs, int nr_divs,
- int divmask)
-{
- int ptr;
-
- armdiv = divs;
- nr_armdiv = nr_divs;
- armdivmask = divmask;
-
- /* s3c2443 parents h and p clocks from prediv */
- clk_h.parent = &clk_prediv;
- clk_p.parent = &clk_prediv;
-
- clk_usb_bus.parent = &clk_usb_bus_host.clk;
- clk_epll.parent = &clk_epllref.clk;
-
- s3c24xx_register_baseclocks(xtal);
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_register_clksrc(clksrcs[ptr], 1);
-
- s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- /* See s3c2443/etc notes on disabling clocks at init time */
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
- s3c2443_common_setup_clocks(get_mpll);
-}
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c
deleted file mode 100644
index 9e90a7cbd1d..00000000000
--- a/arch/arm/plat-s3c24xx/setup-i2c.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/setup-i2c.c
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX Base setup for i2c device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device;
-
-#include <plat/gpio-cfg.h>
-#include <plat/iic.h>
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
- s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
-}
diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/plat-s3c24xx/setup-ts.c
deleted file mode 100644
index ed263866367..00000000000
--- a/arch/arm/plat-s3c24xx/setup-ts.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/setup-ts.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on S3C24XX setup for i2c device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-struct platform_device; /* don't need the contents */
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-/**
- * s3c24xx_ts_cfg_gpio - configure gpio for s3c2410 systems
- *
- * Configure the GPIO for the S3C2410 system, where we have external FETs
- * connected to the device (later systems such as the S3C2440 integrate
- * these into the device).
- */
-void s3c24xx_ts_cfg_gpio(struct platform_device *dev)
-{
- s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
- s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
-}
diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c
deleted file mode 100644
index 6bc832e0d8e..00000000000
--- a/arch/arm/plat-s3c24xx/simtec-audio.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
- *
- * Copyright (c) 2009 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Audio setup for various Simtec S3C24XX implementations
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/audio-simtec.h>
-#include <plat/devs.h>
-
-/* platform ops for audio */
-
-static void simtec_audio_startup_lrroute(void)
-{
- unsigned int tmp;
- unsigned long flags;
-
- local_irq_save(flags);
-
- tmp = __raw_readb(BAST_VA_CTRL1);
- tmp &= ~BAST_CPLD_CTRL1_LRMASK;
- tmp |= BAST_CPLD_CTRL1_LRCDAC;
- __raw_writeb(tmp, BAST_VA_CTRL1);
-
- local_irq_restore(flags);
-}
-
-static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
-static char our_name[32];
-
-static struct platform_device simtec_audio_dev = {
- .name = our_name,
- .id = -1,
- .dev = {
- .parent = &s3c_device_iis.dev,
- .platform_data = &simtec_audio_platdata,
- },
-};
-
-int __init simtec_audio_add(const char *name, bool has_lr_routing,
- struct s3c24xx_audio_simtec_pdata *spd)
-{
- if (!name)
- name = "tlv320aic23";
-
- snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
-
- /* copy platform data so the source can be __initdata */
- if (spd)
- simtec_audio_platdata = *spd;
-
- if (has_lr_routing)
- simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
-
- platform_device_register(&s3c_device_iis);
- platform_device_register(&simtec_audio_dev);
- return 0;
-}
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
deleted file mode 100644
index 704175b0573..00000000000
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
- int enable)
-{
- if (enable) {
- s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
- s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
- s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
- s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
- s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
- } else {
- s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
- s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
- }
-}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
deleted file mode 100644
index 72457afd625..00000000000
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
- int enable)
-{
-
- printk(KERN_INFO "%s(%d)\n", __func__, enable);
- if (enable) {
- s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
- s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
- s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
- s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
- } else {
- s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
- s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
- }
-}
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
deleted file mode 100644
index c3972b645d1..00000000000
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c
- *
- * Copyright (c) 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-
-#include <mach/spi.h>
-#include <mach/regs-gpio.h>
-
-void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
- int enable)
-{
- if (enable) {
- s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
- s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
- s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
- s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
- } else {
- s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
- s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
- s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
- s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
- }
-}