summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap')
-rw-r--r--arch/arm/plat-omap/Kconfig12
-rw-r--r--arch/arm/plat-omap/Makefile2
-rw-r--r--arch/arm/plat-omap/clock.c32
-rw-r--r--arch/arm/plat-omap/common.c2
-rw-r--r--arch/arm/plat-omap/counter_32k.c1
-rw-r--r--arch/arm/plat-omap/debug-leds.c1
-rw-r--r--arch/arm/plat-omap/dma.c19
-rw-r--r--arch/arm/plat-omap/dmtimer.c21
-rw-r--r--arch/arm/plat-omap/fb.c334
-rw-r--r--arch/arm/plat-omap/fb.h10
-rw-r--r--arch/arm/plat-omap/include/plat/blizzard.h12
-rw-r--r--arch/arm/plat-omap/include/plat/board-ams-delta.h49
-rw-r--r--arch/arm/plat-omap/include/plat/board.h2
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h10
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h9
-rw-r--r--arch/arm/plat-omap/include/plat/gpio.h55
-rw-r--r--arch/arm/plat-omap/include/plat/hwa742.h8
-rw-r--r--arch/arm/plat-omap/include/plat/io.h277
-rw-r--r--arch/arm/plat-omap/include/plat/keypad.h2
-rw-r--r--arch/arm/plat-omap/include/plat/mcbsp.h333
-rw-r--r--arch/arm/plat-omap/include/plat/mcspi.h3
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h2
-rw-r--r--arch/arm/plat-omap/include/plat/omap4-keypad.h9
-rw-r--r--arch/arm/plat-omap/include/plat/omap_device.h9
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h18
-rw-r--r--arch/arm/plat-omap/include/plat/remoteproc.h57
-rw-r--r--arch/arm/plat-omap/include/plat/sdrc.h1
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h4
-rw-r--r--arch/arm/plat-omap/include/plat/sram.h1
-rw-r--r--arch/arm/plat-omap/include/plat/system.h15
-rw-r--r--arch/arm/plat-omap/include/plat/tc.h17
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h1
-rw-r--r--arch/arm/plat-omap/include/plat/usb.h40
-rw-r--r--arch/arm/plat-omap/include/plat/vram.h21
-rw-r--r--arch/arm/plat-omap/mailbox.c2
-rw-r--r--arch/arm/plat-omap/mcbsp.c1361
-rw-r--r--arch/arm/plat-omap/mux.c5
-rw-r--r--arch/arm/plat-omap/omap-pm-noop.c2
-rw-r--r--arch/arm/plat-omap/omap_device.c46
-rw-r--r--arch/arm/plat-omap/sram.c35
-rw-r--r--arch/arm/plat-omap/usb.c4
41 files changed, 267 insertions, 2577 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index aa59f4247dc..ad95c7a5d00 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,8 +14,10 @@ config ARCH_OMAP1
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select IRQ_DOMAIN
select HAVE_IDE
select NEED_MACH_MEMORY_H
+ select NEED_MACH_IO_H if PCCARD
help
"Systems based on omap7xx, omap15xx or omap16xx"
@@ -24,6 +26,8 @@ config ARCH_OMAP2PLUS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select USE_OF
+ select PROC_DEVICETREE if PROC_FS
help
"Systems based on OMAP2, OMAP3 or OMAP4"
@@ -110,14 +114,6 @@ config OMAP_MUX_WARNINGS
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
-config OMAP_MCBSP
- bool "McBSP support"
- depends on ARCH_OMAP
- default y
- help
- Say Y here if you want support for the OMAP Multichannel
- Buffered Serial Port.
-
config OMAP_MBOX_FWK
tristate "Mailbox framework support"
depends on ARCH_OMAP
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 9a584614e7e..c0fe2757b69 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -17,8 +17,6 @@ obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
-obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
-
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 567e4b54f24..62ec5c45279 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -20,7 +20,6 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/cpufreq.h>
-#include <linux/debugfs.h>
#include <linux/io.h>
#include <plat/clock.h>
@@ -399,32 +398,6 @@ struct clk dummy_ck = {
.ops = &clkops_null,
};
-#ifdef CONFIG_CPU_FREQ
-void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- unsigned long flags;
-
- if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- arch_clock->clk_init_cpufreq_table(table);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
- unsigned long flags;
-
- if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
- return;
-
- spin_lock_irqsave(&clockfw_lock, flags);
- arch_clock->clk_exit_cpufreq_table(table);
- spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-#endif
-
/*
*
*/
@@ -442,6 +415,8 @@ static int __init clk_disable_unused(void)
return 0;
pr_info("clock: disabling unused clocks to save power\n");
+
+ spin_lock_irqsave(&clockfw_lock, flags);
list_for_each_entry(ck, &clocks, node) {
if (ck->ops == &clkops_null)
continue;
@@ -449,10 +424,9 @@ static int __init clk_disable_unused(void)
if (ck->usecount > 0 || !ck->enable_reg)
continue;
- spin_lock_irqsave(&clockfw_lock, flags);
arch_clock->clk_disable_unused(ck);
- spin_unlock_irqrestore(&clockfw_lock, flags);
}
+ spin_unlock_irqrestore(&clockfw_lock, flags);
return 0;
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 4de7d1e79e7..f1e46ea6b81 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -15,7 +15,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
-#include <linux/omapfb.h>
#include <plat/common.h>
#include <plat/board.h>
@@ -65,7 +64,6 @@ const void *__init omap_get_var_config(u16 tag, size_t *len)
void __init omap_reserve(void)
{
- omapfb_reserve_sdram_memblock();
omap_vram_reserve_sdram_memblock();
omap_dsp_reserve_sdram_memblock();
omap_secure_ram_reserve_memblock();
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 5f0f2292b7f..5068fe5a691 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -21,6 +21,7 @@
#include <asm/sched_clock.h>
+#include <plat/hardware.h>
#include <plat/common.h>
#include <plat/board.h>
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 61a1ec2a6af..39407cbe34c 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -15,7 +15,6 @@
#include <mach/hardware.h>
#include <asm/leds.h>
-#include <asm/system.h>
#include <asm/mach-types.h>
#include <plat/fpga.h>
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 002fb4d96bb..c58d896cd5c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -36,7 +36,6 @@
#include <linux/slab.h>
#include <linux/delay.h>
-#include <asm/system.h>
#include <mach/hardware.h>
#include <plat/dma.h>
@@ -164,6 +163,8 @@ static inline void set_gdma_dev(int req, int dev)
}
#else
#define set_gdma_dev(req, dev) do {} while (0)
+#define omap_readl(reg) 0
+#define omap_writel(val, reg) do {} while (0)
#endif
void omap_set_dma_priority(int lch, int dst_port, int priority)
@@ -915,6 +916,13 @@ void omap_start_dma(int lch)
l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
l |= OMAP_DMA_CCR_EN;
+ /*
+ * As dma_write() uses IO accessors which are weakly ordered, there
+ * is no guarantee that data in coherent DMA memory will be visible
+ * to the DMA device. Add a memory barrier here to ensure that any
+ * such data is visible prior to enabling DMA.
+ */
+ mb();
p->dma_write(l, CCR, lch);
dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -964,6 +972,13 @@ void omap_stop_dma(int lch)
p->dma_write(l, CCR, lch);
}
+ /*
+ * Ensure that data transferred by DMA is visible to any access
+ * after DMA has been disabled. This is important for coherent
+ * DMA regions.
+ */
+ mb();
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[dma_lch_count];
@@ -2125,7 +2140,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev)
static struct platform_driver omap_system_dma_driver = {
.probe = omap_system_dma_probe,
- .remove = omap_system_dma_remove,
+ .remove = __devexit_p(omap_system_dma_remove),
.driver = {
.name = "omap_dma_system"
},
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index af3b92be845..652139c0339 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -43,6 +43,8 @@
#include <plat/dmtimer.h>
+#include <mach/hardware.h>
+
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);
@@ -80,9 +82,9 @@ static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg,
static void omap_timer_restore_context(struct omap_dm_timer *timer)
{
- omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_OFFSET,
- timer->context.tiocp_cfg);
- if (timer->revision > 1)
+ __raw_writel(timer->context.tiocp_cfg,
+ timer->io_base + OMAP_TIMER_OCP_CFG_OFFSET);
+ if (timer->revision == 1)
__raw_writel(timer->context.tistat, timer->sys_stat);
__raw_writel(timer->context.tisr, timer->irq_stat);
@@ -357,6 +359,19 @@ int omap_dm_timer_stop(struct omap_dm_timer *timer)
__omap_dm_timer_stop(timer, timer->posted, rate);
+ if (timer->loses_context && timer->get_context_loss_count)
+ timer->ctx_loss_count =
+ timer->get_context_loss_count(&timer->pdev->dev);
+
+ /*
+ * Since the register values are computed and written within
+ * __omap_dm_timer_stop, we need to use read to retrieve the
+ * context.
+ */
+ timer->context.tclr =
+ omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+ timer->context.tisr = __raw_readl(timer->irq_stat);
+ omap_dm_timer_disable(timer);
return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index c9e5d7298c4..dd6f92c99e5 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -34,15 +34,11 @@
#include <asm/mach/map.h>
#include <plat/board.h>
-#include <plat/sram.h>
-
-#include "fb.h"
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+static bool omapfb_lcd_configured;
static struct omapfb_platform_data omapfb_config;
-static int config_invalid;
-static int configured_regions;
static u64 omap_fb_dma_mask = ~(u32)0;
@@ -57,302 +53,21 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
-void omapfb_set_platform_data(struct omapfb_platform_data *data)
-{
-}
-
-static inline int ranges_overlap(unsigned long start1, unsigned long size1,
- unsigned long start2, unsigned long size2)
-{
- return (start1 >= start2 && start1 < start2 + size2) ||
- (start2 >= start1 && start2 < start1 + size1);
-}
-
-static inline int range_included(unsigned long start1, unsigned long size1,
- unsigned long start2, unsigned long size2)
-{
- return start1 >= start2 && start1 + size1 <= start2 + size2;
-}
-
-
-/* Check if there is an overlapping region. */
-static int fbmem_region_reserved(unsigned long start, size_t size)
-{
- struct omapfb_mem_region *rg;
- int i;
-
- rg = &omapfb_config.mem_desc.region[0];
- for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
- if (!rg->paddr)
- /* Empty slot. */
- continue;
- if (ranges_overlap(start, size, rg->paddr, rg->size))
- return 1;
- }
- return 0;
-}
-
-/*
- * Get the region_idx`th region from board config/ATAG and convert it to
- * our internal format.
- */
-static int __init get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
- const struct omap_fbmem_config *conf;
- u32 paddr;
-
- conf = omap_get_nr_config(OMAP_TAG_FBMEM,
- struct omap_fbmem_config, region_idx);
- if (conf == NULL)
- return -ENOENT;
-
- paddr = conf->start;
- /*
- * Low bits encode the page allocation mode, if high bits
- * are zero. Otherwise we need a page aligned fixed
- * address.
- */
- memset(rg, 0, sizeof(*rg));
- rg->type = paddr & ~PAGE_MASK;
- rg->paddr = paddr & PAGE_MASK;
- rg->size = PAGE_ALIGN(conf->size);
- return 0;
+ omapfb_config.lcd = *config;
+ omapfb_lcd_configured = true;
}
-static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
- unsigned long mem_start,
- unsigned long mem_size)
-{
- /*
- * Check if the configuration specifies the type explicitly.
- * type = 0 && paddr = 0, a default don't care case maps to
- * the SDRAM type.
- */
- if (rg->type || !rg->paddr)
- return 0;
- if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
- rg->type = mem_type;
- return 0;
- }
- /* Can't determine it. */
- return -1;
-}
-
-static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
- unsigned long start_avail, unsigned size_avail)
+static int __init omap_init_fb(void)
{
- unsigned long paddr = rg->paddr;
- size_t size = rg->size;
-
- if (rg->type > OMAPFB_MEMTYPE_MAX) {
- printk(KERN_ERR
- "Invalid start address for FB region %d\n", region_idx);
- return -EINVAL;
- }
-
- if (!rg->size) {
- printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
- return -EINVAL;
- }
-
- if (!paddr)
- /* Allocate this dynamically, leave paddr 0 for now. */
- return 0;
-
/*
- * Fixed region for the given RAM range. Check if it's already
- * reserved by the FB code or someone else.
+ * If the board file has not set the lcd config with
+ * omapfb_set_lcd_config(), don't bother registering the omapfb device
*/
- if (fbmem_region_reserved(paddr, size) ||
- !range_included(paddr, size, start_avail, size_avail)) {
- printk(KERN_ERR "Trying to use reserved memory "
- "for FB region %d\n", region_idx);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int valid_sdram(unsigned long addr, unsigned long size)
-{
- return memblock_is_region_memory(addr, size);
-}
-
-static int reserve_sdram(unsigned long addr, unsigned long size)
-{
- if (memblock_is_region_reserved(addr, size))
- return -EBUSY;
- if (memblock_reserve(addr, size))
- return -ENOMEM;
- return 0;
-}
-
-/*
- * Called from map_io. We need to call to this early enough so that we
- * can reserve the fixed SDRAM regions before VM could get hold of them.
- */
-void __init omapfb_reserve_sdram_memblock(void)
-{
- unsigned long reserved = 0;
- int i;
-
- if (config_invalid)
- return;
-
- for (i = 0; ; i++) {
- struct omapfb_mem_region rg;
-
- if (get_fbmem_region(i, &rg) < 0)
- break;
-
- if (i == OMAPFB_PLANE_NUM) {
- pr_err("Extraneous FB mem configuration entries\n");
- config_invalid = 1;
- return;
- }
-
- /* Check if it's our memory type. */
- if (rg.type != OMAPFB_MEMTYPE_SDRAM)
- continue;
-
- /* Check if the region falls within SDRAM */
- if (rg.paddr && !valid_sdram(rg.paddr, rg.size))
- continue;
-
- if (rg.size == 0) {
- pr_err("Zero size for FB region %d\n", i);
- config_invalid = 1;
- return;
- }
-
- if (rg.paddr) {
- if (reserve_sdram(rg.paddr, rg.size)) {
- pr_err("Trying to use reserved memory for FB region %d\n",
- i);
- config_invalid = 1;
- return;
- }
- reserved += rg.size;
- }
-
- if (omapfb_config.mem_desc.region[i].size) {
- pr_err("FB region %d already set\n", i);
- config_invalid = 1;
- return;
- }
-
- omapfb_config.mem_desc.region[i] = rg;
- configured_regions++;
- }
- omapfb_config.mem_desc.region_cnt = i;
- if (reserved)
- pr_info("Reserving %lu bytes SDRAM for frame buffer\n",
- reserved);
-}
-
-/*
- * Called at sram init time, before anything is pushed to the SRAM stack.
- * Because of the stack scheme, we will allocate everything from the
- * start of the lowest address region to the end of SRAM. This will also
- * include padding for page alignment and possible holes between regions.
- *
- * As opposed to the SDRAM case, we'll also do any dynamic allocations at
- * this point, since the driver built as a module would have problem with
- * freeing / reallocating the regions.
- */
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail)
-{
- struct omapfb_mem_region rg;
- unsigned long pend_avail;
- unsigned long reserved;
- int i;
-
- if (config_invalid)
+ if (!omapfb_lcd_configured)
return 0;
- reserved = 0;
- pend_avail = pstart_avail + size_avail;
- for (i = 0; ; i++) {
- if (get_fbmem_region(i, &rg) < 0)
- break;
- if (i == OMAPFB_PLANE_NUM) {
- printk(KERN_ERR
- "Extraneous FB mem configuration entries\n");
- config_invalid = 1;
- return 0;
- }
-
- /* Check if it's our memory type. */
- if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
- sram_pstart, sram_size) < 0 ||
- (rg.type != OMAPFB_MEMTYPE_SRAM))
- continue;
- BUG_ON(omapfb_config.mem_desc.region[i].size);
-
- if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
- config_invalid = 1;
- return 0;
- }
-
- if (!rg.paddr) {
- /* Dynamic allocation */
- if ((size_avail & PAGE_MASK) < rg.size) {
- printk("Not enough SRAM for FB region %d\n",
- i);
- config_invalid = 1;
- return 0;
- }
- size_avail = (size_avail - rg.size) & PAGE_MASK;
- rg.paddr = pstart_avail + size_avail;
- }
- /* Reserve everything above the start of the region. */
- if (pend_avail - rg.paddr > reserved)
- reserved = pend_avail - rg.paddr;
- size_avail = pend_avail - reserved - pstart_avail;
-
- /*
- * We have a kernel mapping for this already, so the
- * driver won't have to make one.
- */
- rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
- omapfb_config.mem_desc.region[i] = rg;
- configured_regions++;
- }
- omapfb_config.mem_desc.region_cnt = i;
- if (reserved)
- pr_info("Reserving %lu bytes SRAM for frame buffer\n",
- reserved);
- return reserved;
-}
-
-void omapfb_set_ctrl_platform_data(void *data)
-{
- omapfb_config.ctrl_platform_data = data;
-}
-
-static int __init omap_init_fb(void)
-{
- const struct omap_lcd_config *conf;
-
- if (config_invalid)
- return 0;
- if (configured_regions != omapfb_config.mem_desc.region_cnt) {
- printk(KERN_ERR "Invalid FB mem configuration entries\n");
- return 0;
- }
- conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
- if (conf == NULL) {
- if (configured_regions)
- /* FB mem config, but no LCD config? */
- printk(KERN_ERR "Missing LCD configuration\n");
- return 0;
- }
- omapfb_config.lcd = *conf;
-
return platform_device_register(&omap_fb_device);
}
@@ -374,11 +89,6 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
-void omapfb_set_platform_data(struct omapfb_platform_data *data)
-{
- omapfb_config = *data;
-}
-
static int __init omap_init_fb(void)
{
return platform_device_register(&omap_fb_device);
@@ -386,36 +96,10 @@ static int __init omap_init_fb(void)
arch_initcall(omap_init_fb);
-void omapfb_reserve_sdram_memblock(void)
-{
-}
-
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long start_avail,
- unsigned long size_avail)
-{
- return 0;
-}
-
#else
-void omapfb_set_platform_data(struct omapfb_platform_data *data)
-{
-}
-
-void omapfb_reserve_sdram_memblock(void)
-{
-}
-
-unsigned long __init omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long start_avail,
- unsigned long size_avail)
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
{
- return 0;
}
#endif
diff --git a/arch/arm/plat-omap/fb.h b/arch/arm/plat-omap/fb.h
deleted file mode 100644
index d765d0bd852..00000000000
--- a/arch/arm/plat-omap/fb.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __PLAT_OMAP_FB_H__
-#define __PLAT_OMAP_FB_H__
-
-extern unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail);
-
-#endif /* __PLAT_OMAP_FB_H__ */
diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
deleted file mode 100644
index 56e7f2e7d12..00000000000
--- a/arch/arm/plat-omap/include/plat/blizzard.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _BLIZZARD_H
-#define _BLIZZARD_H
-
-struct blizzard_platform_data {
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
- unsigned long (*get_clock_rate)(struct device *dev);
-
- unsigned te_connected:1;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102dc906..ad6f865d1f1 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -28,33 +28,8 @@
#if defined (CONFIG_MACH_AMS_DELTA)
-#define AMS_DELTA_LATCH1_PHYS 0x01000000
-#define AMS_DELTA_LATCH1_VIRT 0xEA000000
-#define AMS_DELTA_MODEM_PHYS 0x04000000
-#define AMS_DELTA_MODEM_VIRT 0xEB000000
-#define AMS_DELTA_LATCH2_PHYS 0x08000000
-#define AMS_DELTA_LATCH2_VIRT 0xEC000000
-
-#define AMS_DELTA_LATCH1_LED_CAMERA 0x01
-#define AMS_DELTA_LATCH1_LED_ADVERT 0x02
-#define AMS_DELTA_LATCH1_LED_EMAIL 0x04
-#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08
-#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10
-#define AMS_DELTA_LATCH1_LED_VOICE 0x20
-
-#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001
-#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002
-#define AMS_DELTA_LATCH2_NAND_NCE 0x0004
-#define AMS_DELTA_LATCH2_NAND_NRE 0x0008
-#define AMS_DELTA_LATCH2_NAND_NWP 0x0010
-#define AMS_DELTA_LATCH2_NAND_NWE 0x0020
-#define AMS_DELTA_LATCH2_NAND_ALE 0x0040
-#define AMS_DELTA_LATCH2_NAND_CLE 0x0080
-#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100
-#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200
#define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
#define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800
-#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000
#define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000
#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0
@@ -66,9 +41,29 @@
#define AMS_DELTA_GPIO_PIN_CONFIG 11
#define AMS_DELTA_GPIO_PIN_NAND_RB 12
+#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240
+#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241
+#define AMS_DELTA_GPIO_PIN_NAND_NCE 242
+#define AMS_DELTA_GPIO_PIN_NAND_NRE 243
+#define AMS_DELTA_GPIO_PIN_NAND_NWP 244
+#define AMS_DELTA_GPIO_PIN_NAND_NWE 245
+#define AMS_DELTA_GPIO_PIN_NAND_ALE 246
+#define AMS_DELTA_GPIO_PIN_NAND_CLE 247
+#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249
+#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250
+#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251
+#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252
+#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253
+
+#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
+#define AMS_DELTA_LATCH2_NGPIO 16
+
#ifndef __ASSEMBLY__
-void ams_delta_latch1_write(u8 mask, u8 value);
-void ams_delta_latch2_write(u16 mask, u16 value);
+void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
+#define ams_delta_latch2_write(mask, value) \
+ ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
+ AMS_DELTA_LATCH2_NGPIO, (mask), (value))
#endif
#endif /* CONFIG_MACH_AMS_DELTA */
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 97126dfd288..d5eb4c87db9 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -28,9 +28,7 @@ enum {
/* Different peripheral ids */
#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_LCD 0x4f05
#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_FBMEM 0x4f08
#define OMAP_TAG_STI_CONSOLE 0x4f09
#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 240a7b9fd94..d0ef57c1d71 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -272,8 +272,6 @@ struct clk {
#endif
};
-struct cpufreq_frequency_table;
-
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
@@ -283,10 +281,6 @@ struct clk_functions {
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
- void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
- void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
-#endif
};
extern int mpurate;
@@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#endif
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 6b51086fce1..dc6a86bf217 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -250,7 +250,6 @@ IS_AM_SUBCLASS(335x, 0x335)
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap4430(): True for OMAP4430
* cpu_is_omap3505(): True for OMAP3505
* cpu_is_omap3517(): True for OMAP3517
*/
@@ -299,7 +298,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap3505() 0
#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
-#define cpu_is_omap4430() 0
#define cpu_is_omap3630() 0
/*
@@ -451,7 +449,12 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP447X_CLASS 0x44700044
#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
-void omap2_check_revision(void);
+void omap2xxx_check_revision(void);
+void omap3xxx_check_revision(void);
+void omap4xxx_check_revision(void);
+void omap3xxx_check_features(void);
+void ti81xx_check_features(void);
+void omap4xxx_check_features(void);
/*
* Runtime detection of OMAP3 features
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 9e86ee0aed0..2f6e9924a81 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -158,17 +158,6 @@
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
-#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \
- IH_MPUIO_BASE + ((nr) & 0x0f) : \
- IH_GPIO_BASE + (nr))
-
-#define METHOD_MPUIO 0
-#define METHOD_GPIO_1510 1
-#define METHOD_GPIO_1610 2
-#define METHOD_GPIO_7XX 3
-#define METHOD_GPIO_24XX 5
-#define METHOD_GPIO_44XX 6
-
struct omap_gpio_dev_attr {
int bank_width; /* GPIO bank width */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
@@ -184,10 +173,21 @@ struct omap_gpio_reg_offs {
u16 irqstatus;
u16 irqstatus2;
u16 irqenable;
+ u16 irqenable2;
u16 set_irqenable;
u16 clr_irqenable;
u16 debounce;
u16 debounce_en;
+ u16 ctrl;
+ u16 wkup_en;
+ u16 leveldetect0;
+ u16 leveldetect1;
+ u16 risingdetect;
+ u16 fallingdetect;
+ u16 irqctrl;
+ u16 edgectrl1;
+ u16 edgectrl2;
+ u16 pinctrl;
bool irqenable_inv;
};
@@ -198,45 +198,30 @@ struct omap_gpio_platform_data {
int bank_width; /* GPIO bank width */
int bank_stride; /* Only needed for omap1 MPUIO */
bool dbck_flag; /* dbck required or not - True for OMAP3&4 */
+ bool loses_context; /* whether the bank would ever lose context */
+ bool is_mpuio; /* whether the bank is of type MPUIO */
+ u32 non_wakeup_gpios;
struct omap_gpio_reg_offs *regs;
-};
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-extern int gpio_bank_count;
+ /* Return context loss count due to PM states changing */
+ int (*get_context_loss_count)(struct device *dev);
+};
extern void omap2_gpio_prepare_for_idle(int off_mode);
extern void omap2_gpio_resume_after_idle(void);
extern void omap_set_gpio_debounce(int gpio, int enable);
extern void omap_set_gpio_debounce_time(int gpio, int enable);
-extern void omap_gpio_save_context(void);
-extern void omap_gpio_restore_context(void);
/*-------------------------------------------------------------------------*/
-/* Wrappers for "new style" GPIO calls, using the new infrastructure
+/*
+ * Wrappers for "new style" GPIO calls, using the new infrastructure
* which lets us plug in FPGA, I2C, and other implementations.
- * *
+ *
* The original OMAP-specific calls should eventually be removed.
*/
#include <linux/errno.h>
#include <asm-generic/gpio.h>
-static inline int irq_to_gpio(unsigned irq)
-{
- int tmp;
-
- /* omap1 SOC mpuio */
- if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
- return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
-
- /* SOC gpio */
- tmp = irq - IH_GPIO_BASE;
- if (tmp < OMAP_MAX_GPIO_LINES)
- return tmp;
-
- /* we don't supply reverse mappings for non-SOC gpios */
- return -EIO;
-}
-
#endif
diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
deleted file mode 100644
index 886248d32b4..00000000000
--- a/arch/arm/plat-omap/include/plat/hwa742.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _HWA742_H
-#define _HWA742_H
-
-struct hwa742_platform_data {
- unsigned te_connected:1;
-};
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
deleted file mode 100644
index 0696bae1818..00000000000
--- a/arch/arm/plat-omap/include/plat/io.h
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/io.h
- *
- * IO definitions for TI OMAP processors and boards
- *
- * Copied from arch/arm/mach-sa1100/include/mach/io.h
- * Copyright (C) 1997-1999 Russell King
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Modifications:
- * 06-12-1997 RMK Created.
- * 07-04-1999 RMK Major cleanup
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <mach/hardware.h>
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-/*
- * We don't actually have real ISA nor PCI buses, but there is so many
- * drivers out there that might just work if we fake them...
- */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
-
-/*
- * ----------------------------------------------------------------------------
- * I/O mapping
- * ----------------------------------------------------------------------------
- */
-
-#ifdef __ASSEMBLER__
-#define IOMEM(x) (x)
-#else
-#define IOMEM(x) ((void __force __iomem *)(x))
-#endif
-
-#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
-
-#define OMAP2_L3_IO_OFFSET 0x90000000
-#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
-
-
-#define OMAP2_L4_IO_OFFSET 0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
-
-#define OMAP4_L3_IO_OFFSET 0xb4000000
-#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
-
-#define AM33XX_L4_WK_IO_OFFSET 0xb5000000
-#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET)
-
-#define OMAP4_L3_PER_IO_OFFSET 0xb1100000
-#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
-
-#define OMAP4_GPMC_IO_OFFSET 0xa9000000
-#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
-
-#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */
-#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap1 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1_IO_PHYS 0xFFFB0000
-#define OMAP1_IO_SIZE 0x40000
-#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
-
-/*
- * ----------------------------------------------------------------------------
- * Omap2 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/
-#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */
-#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */
-
-#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
-#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_243X_SIZE SZ_1M
-#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE
-#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
- /* 0x6e000000 --> 0xfe000000 */
-#define OMAP243X_GPMC_SIZE SZ_1M
-#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE
- /* 0x6D000000 --> 0xfd000000 */
-#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SDRC_SIZE SZ_1M
-#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE
- /* 0x6c000000 --> 0xfc000000 */
-#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP243X_SMS_SIZE SZ_1M
-
-/* 2420 IVA */
-#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE
- /* 0x58000000 --> 0xfc100000 */
-#define DSP_MEM_2420_VIRT 0xfc100000
-#define DSP_MEM_2420_SIZE 0x28000
-#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE
- /* 0x59000000 --> 0xfc128000 */
-#define DSP_IPI_2420_VIRT 0xfc128000
-#define DSP_IPI_2420_SIZE SZ_4K
-#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE
- /* 0x5a000000 --> 0xfc129000 */
-#define DSP_MMU_2420_VIRT 0xfc129000
-#define DSP_MMU_2420_SIZE SZ_4K
-
-/* 2430 IVA2.1 - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap3 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */
-#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
-#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
-
-#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */
-#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * ----------------------------------------------------------------------------
- * AM33XX specific IO mapping
- * ----------------------------------------------------------------------------
- */
-#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE
-#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET)
-#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
-
-/*
- * Need to look at the Size 4M for L4.
- * VPOM3430 was not working for Int controller
- */
-
-#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
- /* 0x49000000 --> 0xfb000000 */
-#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_34XX_SIZE SZ_1M
-
-#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE
- /* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_34XX_SIZE SZ_8M
-
-#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE
- /* 0x6e000000 --> 0xfe000000 */
-#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP34XX_GPMC_SIZE SZ_1M
-
-#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE
- /* 0x6c000000 --> 0xfc000000 */
-#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SMS_SIZE SZ_1M
-
-#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE
- /* 0x6D000000 --> 0xfd000000 */
-#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
-#define OMAP343X_SDRC_SIZE SZ_1M
-
-/* 3430 IVA - currently unmapped */
-
-/*
- * ----------------------------------------------------------------------------
- * Omap4 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-/* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */
-#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
-#define L3_44XX_SIZE SZ_1M
-
-#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */
-#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_44XX_SIZE SZ_4M
-
-#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
- /* 0x48000000 --> 0xfa000000 */
-#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_PER_44XX_SIZE SZ_4M
-
-#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE
- /* 0x49000000 --> 0xfb000000 */
-#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_ABE_44XX_SIZE SZ_1M
-
-#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
- /* 0x54000000 --> 0xfe800000 */
-#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
-#define L4_EMU_44XX_SIZE SZ_8M
-
-#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
- /* 0x50000000 --> 0xf9000000 */
-#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
-#define OMAP44XX_GPMC_SIZE SZ_1M
-
-
-#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE
- /* 0x4c000000 --> 0xfd100000 */
-#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
-#define OMAP44XX_EMIF1_SIZE SZ_1M
-
-#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE
- /* 0x4d000000 --> 0xfd200000 */
-#define OMAP44XX_EMIF2_SIZE SZ_1M
-#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE)
-
-#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE
- /* 0x4e000000 --> 0xfd300000 */
-#define OMAP44XX_DMM_SIZE SZ_1M
-#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE)
-/*
- * ----------------------------------------------------------------------------
- * Omap specific register access
- * ----------------------------------------------------------------------------
- */
-
-#ifndef __ASSEMBLER__
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
-struct omap_sdrc_params;
-extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
- struct omap_sdrc_params *sdrc_cs1);
-
-extern void __init omap_init_consistent_dma_size(void);
-
-#endif
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 793ce9d5329..a6b21eddb21 100644
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
@@ -12,6 +12,8 @@
#ifndef CONFIG_ARCH_OMAP1
#warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg) 0
+#define omap_writew(val, reg) do {} while (0)
#endif
#include <linux/input/matrix_keypad.h>
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 8fa74e2c9d6..18814127809 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -27,271 +27,10 @@
#include <linux/spinlock.h>
#include <linux/clk.h>
-/* macro for building platform_device for McBSP ports */
-#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \
-static struct platform_device omap_mcbsp##port_nr = { \
- .name = "omap-mcbsp-dai", \
- .id = port_nr - 1, \
-}
-
#define MCBSP_CONFIG_TYPE2 0x2
#define MCBSP_CONFIG_TYPE3 0x3
#define MCBSP_CONFIG_TYPE4 0x4
-/* McBSP register numbers. Register address offset = num * reg_step */
-enum {
- /* Common registers */
- OMAP_MCBSP_REG_SPCR2 = 4,
- OMAP_MCBSP_REG_SPCR1,
- OMAP_MCBSP_REG_RCR2,
- OMAP_MCBSP_REG_RCR1,
- OMAP_MCBSP_REG_XCR2,
- OMAP_MCBSP_REG_XCR1,
- OMAP_MCBSP_REG_SRGR2,
- OMAP_MCBSP_REG_SRGR1,
- OMAP_MCBSP_REG_MCR2,
- OMAP_MCBSP_REG_MCR1,
- OMAP_MCBSP_REG_RCERA,
- OMAP_MCBSP_REG_RCERB,
- OMAP_MCBSP_REG_XCERA,
- OMAP_MCBSP_REG_XCERB,
- OMAP_MCBSP_REG_PCR0,
- OMAP_MCBSP_REG_RCERC,
- OMAP_MCBSP_REG_RCERD,
- OMAP_MCBSP_REG_XCERC,
- OMAP_MCBSP_REG_XCERD,
- OMAP_MCBSP_REG_RCERE,
- OMAP_MCBSP_REG_RCERF,
- OMAP_MCBSP_REG_XCERE,
- OMAP_MCBSP_REG_XCERF,
- OMAP_MCBSP_REG_RCERG,
- OMAP_MCBSP_REG_RCERH,
- OMAP_MCBSP_REG_XCERG,
- OMAP_MCBSP_REG_XCERH,
-
- /* OMAP1-OMAP2420 registers */
- OMAP_MCBSP_REG_DRR2 = 0,
- OMAP_MCBSP_REG_DRR1,
- OMAP_MCBSP_REG_DXR2,
- OMAP_MCBSP_REG_DXR1,
-
- /* OMAP2430 and onwards */
- OMAP_MCBSP_REG_DRR = 0,
- OMAP_MCBSP_REG_DXR = 2,
- OMAP_MCBSP_REG_SYSCON = 35,
- OMAP_MCBSP_REG_THRSH2,
- OMAP_MCBSP_REG_THRSH1,
- OMAP_MCBSP_REG_IRQST = 40,
- OMAP_MCBSP_REG_IRQEN,
- OMAP_MCBSP_REG_WAKEUPEN,
- OMAP_MCBSP_REG_XCCR,
- OMAP_MCBSP_REG_RCCR,
- OMAP_MCBSP_REG_XBUFFSTAT,
- OMAP_MCBSP_REG_RBUFFSTAT,
- OMAP_MCBSP_REG_SSELCR,
-};
-
-/* OMAP3 sidetone control registers */
-#define OMAP_ST_REG_REV 0x00
-#define OMAP_ST_REG_SYSCONFIG 0x10
-#define OMAP_ST_REG_IRQSTATUS 0x18
-#define OMAP_ST_REG_IRQENABLE 0x1C
-#define OMAP_ST_REG_SGAINCR 0x24
-#define OMAP_ST_REG_SFIRCR 0x28
-#define OMAP_ST_REG_SSELCR 0x2C
-
-/************************** McBSP SPCR1 bit definitions ***********************/
-#define RRST 0x0001
-#define RRDY 0x0002
-#define RFULL 0x0004
-#define RSYNC_ERR 0x0008
-#define RINTM(value) ((value)<<4) /* bits 4:5 */
-#define ABIS 0x0040
-#define DXENA 0x0080
-#define CLKSTP(value) ((value)<<11) /* bits 11:12 */
-#define RJUST(value) ((value)<<13) /* bits 13:14 */
-#define ALB 0x8000
-#define DLB 0x8000
-
-/************************** McBSP SPCR2 bit definitions ***********************/
-#define XRST 0x0001
-#define XRDY 0x0002
-#define XEMPTY 0x0004
-#define XSYNC_ERR 0x0008
-#define XINTM(value) ((value)<<4) /* bits 4:5 */
-#define GRST 0x0040
-#define FRST 0x0080
-#define SOFT 0x0100
-#define FREE 0x0200
-
-/************************** McBSP PCR bit definitions *************************/
-#define CLKRP 0x0001
-#define CLKXP 0x0002
-#define FSRP 0x0004
-#define FSXP 0x0008
-#define DR_STAT 0x0010
-#define DX_STAT 0x0020
-#define CLKS_STAT 0x0040
-#define SCLKME 0x0080
-#define CLKRM 0x0100
-#define CLKXM 0x0200
-#define FSRM 0x0400
-#define FSXM 0x0800
-#define RIOEN 0x1000
-#define XIOEN 0x2000
-#define IDLE_EN 0x4000
-
-/************************** McBSP RCR1 bit definitions ************************/
-#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */
-#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */
-
-/************************** McBSP XCR1 bit definitions ************************/
-#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */
-#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */
-
-/*************************** McBSP RCR2 bit definitions ***********************/
-#define RDATDLY(value) (value) /* Bits 0:1 */
-#define RFIG 0x0004
-#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */
-#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */
-#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */
-#define RPHASE 0x8000
-
-/*************************** McBSP XCR2 bit definitions ***********************/
-#define XDATDLY(value) (value) /* Bits 0:1 */
-#define XFIG 0x0004
-#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */
-#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */
-#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */
-#define XPHASE 0x8000
-
-/************************* McBSP SRGR1 bit definitions ************************/
-#define CLKGDV(value) (value) /* Bits 0:7 */
-#define FWID(value) ((value)<<8) /* Bits 8:15 */
-
-/************************* McBSP SRGR2 bit definitions ************************/
-#define FPER(value) (value) /* Bits 0:11 */
-#define FSGM 0x1000
-#define CLKSM 0x2000
-#define CLKSP 0x4000
-#define GSYNC 0x8000
-
-/************************* McBSP MCR1 bit definitions *************************/
-#define RMCM 0x0001
-#define RCBLK(value) ((value)<<2) /* Bits 2:4 */
-#define RPABLK(value) ((value)<<5) /* Bits 5:6 */
-#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */
-
-/************************* McBSP MCR2 bit definitions *************************/
-#define XMCM(value) (value) /* Bits 0:1 */
-#define XCBLK(value) ((value)<<2) /* Bits 2:4 */
-#define XPABLK(value) ((value)<<5) /* Bits 5:6 */
-#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */
-
-/*********************** McBSP XCCR bit definitions *************************/
-#define EXTCLKGATE 0x8000
-#define PPCONNECT 0x4000
-#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */
-#define XFULL_CYCLE 0x0800
-#define DILB 0x0020
-#define XDMAEN 0x0008
-#define XDISABLE 0x0001
-
-/********************** McBSP RCCR bit definitions *************************/
-#define RFULL_CYCLE 0x0800
-#define RDMAEN 0x0008
-#define RDISABLE 0x0001
-
-/********************** McBSP SYSCONFIG bit definitions ********************/
-#define CLOCKACTIVITY(value) ((value)<<8)
-#define SIDLEMODE(value) ((value)<<3)
-#define ENAWAKEUP 0x0004
-#define SOFTRST 0x0002
-
-/********************** McBSP SSELCR bit definitions ***********************/
-#define SIDETONEEN 0x0400
-
-/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/
-#define ST_AUTOIDLE 0x0001
-
-/********************** McBSP Sidetone SGAINCR bit definitions *************/
-#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */
-#define ST_CH0GAIN(value) (value) /* Bits 0:15 */
-
-/********************** McBSP Sidetone SFIRCR bit definitions **************/
-#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */
-
-/********************** McBSP Sidetone SSELCR bit definitions **************/
-#define ST_COEFFWRDONE 0x0004
-#define ST_COEFFWREN 0x0002
-#define ST_SIDETONEEN 0x0001
-
-/********************** McBSP DMA operating modes **************************/
-#define MCBSP_DMA_MODE_ELEMENT 0
-#define MCBSP_DMA_MODE_THRESHOLD 1
-#define MCBSP_DMA_MODE_FRAME 2
-
-/********************** McBSP WAKEUPEN bit definitions *********************/
-#define XEMPTYEOFEN 0x4000
-#define XRDYEN 0x0400
-#define XEOFEN 0x0200
-#define XFSXEN 0x0100
-#define XSYNCERREN 0x0080
-#define RRDYEN 0x0008
-#define REOFEN 0x0004
-#define RFSREN 0x0002
-#define RSYNCERREN 0x0001
-
-/* CLKR signal muxing options */
-#define CLKR_SRC_CLKR 0
-#define CLKR_SRC_CLKX 1
-
-/* FSR signal muxing options */
-#define FSR_SRC_FSR 0
-#define FSR_SRC_FSX 1
-
-/* McBSP functional clock sources */
-#define MCBSP_CLKS_PRCM_SRC 0
-#define MCBSP_CLKS_PAD_SRC 1
-
-/* we don't do multichannel for now */
-struct omap_mcbsp_reg_cfg {
- u16 spcr2;
- u16 spcr1;
- u16 rcr2;
- u16 rcr1;
- u16 xcr2;
- u16 xcr1;
- u16 srgr2;
- u16 srgr1;
- u16 mcr2;
- u16 mcr1;
- u16 pcr0;
- u16 rcerc;
- u16 rcerd;
- u16 xcerc;
- u16 xcerd;
- u16 rcere;
- u16 rcerf;
- u16 xcere;
- u16 xcerf;
- u16 rcerg;
- u16 rcerh;
- u16 xcerg;
- u16 xcerh;
- u16 xccr;
- u16 rccr;
-};
-
-typedef enum {
- OMAP_MCBSP_WORD_8 = 0,
- OMAP_MCBSP_WORD_12,
- OMAP_MCBSP_WORD_16,
- OMAP_MCBSP_WORD_20,
- OMAP_MCBSP_WORD_24,
- OMAP_MCBSP_WORD_32,
-} omap_mcbsp_word_length;
-
/* Platform specific configuration */
struct omap_mcbsp_ops {
void (*request)(unsigned int);
@@ -312,43 +51,6 @@ struct omap_mcbsp_platform_data {
int (*mux_signal)(struct device *dev, const char *signal, const char *src);
};
-struct omap_mcbsp_st_data {
- void __iomem *io_base_st;
- bool running;
- bool enabled;
- s16 taps[128]; /* Sidetone filter coefficients */
- int nr_taps; /* Number of filter coefficients in use */
- s16 ch0gain;
- s16 ch1gain;
-};
-
-struct omap_mcbsp {
- struct device *dev;
- unsigned long phys_base;
- unsigned long phys_dma_base;
- void __iomem *io_base;
- u8 id;
- u8 free;
-
- int rx_irq;
- int tx_irq;
-
- /* DMA stuff */
- u8 dma_rx_sync;
- u8 dma_tx_sync;
-
- /* Protect the field .free, while checking if the mcbsp is in use */
- spinlock_t lock;
- struct omap_mcbsp_platform_data *pdata;
- struct clk *fclk;
- struct omap_mcbsp_st_data *st_data;
- int dma_op_mode;
- u16 max_tx_thres;
- u16 max_rx_thres;
- void *reg_cache;
- int reg_cache_size;
-};
-
/**
* omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
* @sidetone: name of the sidetone device
@@ -357,39 +59,4 @@ struct omap_mcbsp_dev_attr {
const char *sidetone;
};
-extern struct omap_mcbsp **mcbsp_ptr;
-extern int omap_mcbsp_count;
-
-int omap_mcbsp_init(void);
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
-void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
-void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
-u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
-u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
-u16 omap_mcbsp_get_fifo_size(unsigned int id);
-u16 omap_mcbsp_get_tx_delay(unsigned int id);
-u16 omap_mcbsp_get_rx_delay(unsigned int id);
-int omap_mcbsp_get_dma_op_mode(unsigned int id);
-int omap_mcbsp_request(unsigned int id);
-void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id, int tx, int rx);
-void omap_mcbsp_stop(unsigned int id, int tx, int rx);
-
-/* McBSP functional clock source changing function */
-extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
-
-/* McBSP signal muxing API */
-void omap2_mcbsp1_mux_clkr_src(u8 mux);
-void omap2_mcbsp1_mux_fsr_src(u8 mux);
-
-int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
-int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
-
-/* Sidetone specific API */
-int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
-int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
-int omap_st_enable(unsigned int id);
-int omap_st_disable(unsigned int id);
-int omap_st_is_enabled(unsigned int id);
-
#endif
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 3d51b18131c..a357eb26bd2 100644
--- a/arch/arm/plat-omap/include/plat/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -18,9 +18,6 @@ struct omap2_mcspi_dev_attr {
struct omap2_mcspi_device_config {
unsigned turbo_mode:1;
-
- /* Do we want one channel enabled at the same time? */
- unsigned single_channel:1;
};
#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index f75946c3293..7a38750c007 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -137,8 +137,6 @@ struct omap_mmc_platform_data {
int (*set_power)(struct device *dev, int slot,
int power_on, int vdd);
int (*get_ro)(struct device *dev, int slot);
- int (*set_sleep)(struct device *dev, int slot, int sleep,
- int vdd, int cardsleep);
void (*remux)(struct device *dev, int slot, int power_on);
/* Call back before enabling / disabling regulators */
void (*before_set_reg)(struct device *dev, int slot,
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
index 9fe6c878323..8ad0a377a54 100644
--- a/arch/arm/plat-omap/include/plat/omap4-keypad.h
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -1,15 +1,6 @@
#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
-#include <linux/input/matrix_keypad.h>
-
-struct omap4_keypad_platform_data {
- const struct matrix_keymap_data *keymap_data;
-
- u8 rows;
- u8 cols;
-};
-
extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
struct omap_board_data *);
#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 51423d2727a..4327b2c90c3 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -36,7 +36,7 @@
#include <plat/omap_hwmod.h>
-extern struct device omap_device_parent;
+extern struct dev_pm_domain omap_device_pm_domain;
/* omap_device._state values */
#define OMAP_DEVICE_STATE_UNKNOWN 0
@@ -100,6 +100,13 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt, int is_early_device);
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+ struct omap_hwmod **ohs, int oh_cnt,
+ struct omap_device_pm_latency *pm_lats,
+ int pm_lats_cnt);
+void omap_device_delete(struct omap_device *od);
+int omap_device_register(struct platform_device *pdev);
+
void __iomem *omap_device_get_rt_va(struct omap_device *od);
struct device *omap_device_get_by_hwmod_name(const char *oh_name);
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 647010109af..3f26db4ee8e 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -47,17 +47,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
* with the original PRCM protocol defined for OMAP2420
*/
#define SYSC_TYPE1_MIDLEMODE_SHIFT 12
-#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_MIDLEMODE_MASK (0x3 << SYSC_TYPE1_MIDLEMODE_SHIFT)
#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT 8
-#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK (0x3 << SYSC_TYPE1_CLOCKACTIVITY_SHIFT)
#define SYSC_TYPE1_SIDLEMODE_SHIFT 3
-#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_MASK (0x3 << SYSC_TYPE1_SIDLEMODE_SHIFT)
#define SYSC_TYPE1_ENAWAKEUP_SHIFT 2
-#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_MASK (1 << SYSC_TYPE1_ENAWAKEUP_SHIFT)
#define SYSC_TYPE1_SOFTRESET_SHIFT 1
-#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_MASK (1 << SYSC_TYPE1_SOFTRESET_SHIFT)
#define SYSC_TYPE1_AUTOIDLE_SHIFT 0
-#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_MASK (1 << SYSC_TYPE1_AUTOIDLE_SHIFT)
/*
* OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
@@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
@@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
+ struct omap_hwmod_sysc_fields *sysc_fields;
+ u8 srst_udelay;
u8 idlemodes;
u8 clockact;
- struct omap_hwmod_sysc_fields *sysc_fields;
};
/**
@@ -484,7 +486,6 @@ struct omap_hwmod_class {
* @main_clk: main clock: OMAP clock name
* @_clk: pointer to the main struct clk (filled in at runtime)
* @opt_clks: other device clocks that drivers can request (0..*)
- * @vdd_name: voltage domain name
* @voltdm: pointer to voltage domain (filled in at runtime)
* @masters: ptr to array of OCP ifs that this hwmod can initiate on
* @slaves: ptr to array of OCP ifs that this hwmod can respond on
@@ -528,7 +529,6 @@ struct omap_hwmod {
struct omap_hwmod_opt_clk *opt_clks;
char *clkdm_name;
struct clockdomain *clkdm;
- char *vdd_name;
struct omap_hwmod_ocp_if **masters; /* connect to *_IA */
struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */
void *dev_attr;
diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h
new file mode 100644
index 00000000000..b10eac89e2e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/remoteproc.h
@@ -0,0 +1,57 @@
+/*
+ * Remote Processor - omap-specific bits
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_REMOTEPROC_H
+#define _PLAT_REMOTEPROC_H
+
+struct rproc_ops;
+struct platform_device;
+
+/*
+ * struct omap_rproc_pdata - omap remoteproc's platform data
+ * @name: the remoteproc's name
+ * @oh_name: omap hwmod device
+ * @oh_name_opt: optional, secondary omap hwmod device
+ * @firmware: name of firmware file to load
+ * @mbox_name: name of omap mailbox device to use with this rproc
+ * @ops: start/stop rproc handlers
+ * @device_enable: omap-specific handler for enabling a device
+ * @device_shutdown: omap-specific handler for shutting down a device
+ */
+struct omap_rproc_pdata {
+ const char *name;
+ const char *oh_name;
+ const char *oh_name_opt;
+ const char *firmware;
+ const char *mbox_name;
+ const struct rproc_ops *ops;
+ int (*device_enable) (struct platform_device *pdev);
+ int (*device_shutdown) (struct platform_device *pdev);
+};
+
+#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE)
+
+void __init omap_rproc_reserve_cma(void);
+
+#else
+
+void __init omap_rproc_reserve_cma(void)
+{
+}
+
+#endif
+
+#endif /* _PLAT_REMOTEPROC_H */
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 925b12b500d..9bb978ecd88 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -16,7 +16,6 @@
* published by the Free Software Foundation.
*/
-#include <mach/io.h>
/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 198d1e6a4a6..fd14d28e5bb 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -110,8 +110,8 @@ struct omap_board_data;
struct omap_uart_port_info;
extern void omap_serial_init(void);
-extern int omap_uart_can_sleep(void);
-extern void omap_serial_board_init(struct omap_uart_port_info *platform_data);
+extern void omap_serial_board_init(struct omap_uart_port_info *platform_data,
+ u8 port_id);
extern void omap_serial_init_port(struct omap_board_data *bdata,
struct omap_uart_port_info *platform_data);
#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 75aa1b2bef5..227ae265755 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -101,4 +101,5 @@ static inline void omap_push_sram_idle(void) {}
#else
#define OMAP4_SRAM_PA 0x40300000
#endif
+#define AM33XX_SRAM_PA 0x40300000
#endif
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd74b12..00000000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h
index d2fcd789bb9..1b4b2da8620 100644
--- a/arch/arm/plat-omap/include/plat/tc.h
+++ b/arch/arm/plat-omap/include/plat/tc.h
@@ -84,23 +84,6 @@
#define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n)))
#define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n)))
-/* Almost all documentation for chip and board memory maps assumes
- * BM is clear. Most devel boards have a switch to control booting
- * from NOR flash (using external chipselect 3) rather than mask ROM,
- * which uses BM to interchange the physical CS0 and CS3 addresses.
- */
-static inline u32 omap_cs0_phys(void)
-{
- return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
- ? OMAP_CS3_PHYS : 0;
-}
-
-static inline u32 omap_cs3_phys(void)
-{
- return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
- ? 0 : OMAP_CS3_PHYS;
-}
-
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 6ee90495ca4..cc3f11ba7a9 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_OMAP3(3, igep0020);
DEBUG_LL_OMAP3(3, igep0030);
DEBUG_LL_OMAP3(3, nokia_rm680);
+ DEBUG_LL_OMAP3(3, nokia_rm696);
DEBUG_LL_OMAP3(3, nokia_rx51);
DEBUG_LL_OMAP3(3, omap3517evm);
DEBUG_LL_OMAP3(3, omap3_beagle);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index dc864b580da..762eeb0626c 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,6 +3,7 @@
#ifndef __ASM_ARCH_OMAP_USB_H
#define __ASM_ARCH_OMAP_USB_H
+#include <linux/io.h>
#include <linux/usb/musb.h>
#include <plat/board.h>
@@ -105,6 +106,45 @@ extern int omap4430_phy_set_clk(struct device *dev, int on);
extern int omap4430_phy_init(struct device *dev);
extern int omap4430_phy_exit(struct device *dev);
extern int omap4430_phy_suspend(struct device *dev, int suspend);
+
+/*
+ * NOTE: Please update omap USB drivers to use ioremap + read/write
+ */
+
+#define OMAP2_L4_IO_OFFSET 0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET)
+
+static inline u8 omap_readb(u32 pa)
+{
+ return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u16 omap_readw(u32 pa)
+{
+ return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u32 omap_readl(u32 pa)
+{
+ return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writeb(u8 v, u32 pa)
+{
+ __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+
+static inline void omap_writew(u16 v, u32 pa)
+{
+ __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writel(u32 v, u32 pa)
+{
+ __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
#endif
extern void am35x_musb_reset(void);
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
index 0aa4ecd12c7..4d65b7d06e6 100644
--- a/arch/arm/plat-omap/include/plat/vram.h
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -23,40 +23,21 @@
#include <linux/types.h>
-#define OMAP_VRAM_MEMTYPE_SDRAM 0
-#define OMAP_VRAM_MEMTYPE_SRAM 1
-#define OMAP_VRAM_MEMTYPE_MAX 1
-
extern int omap_vram_add_region(unsigned long paddr, size_t size);
extern int omap_vram_free(unsigned long paddr, size_t size);
-extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_alloc(size_t size, unsigned long *paddr);
extern int omap_vram_reserve(unsigned long paddr, size_t size);
extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
unsigned long *largest_free_block);
#ifdef CONFIG_OMAP2_VRAM
extern void omap_vram_set_sdram_vram(u32 size, u32 start);
-extern void omap_vram_set_sram_vram(u32 size, u32 start);
extern void omap_vram_reserve_sdram_memblock(void);
-extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail);
#else
static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
-static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
static inline void omap_vram_reserve_sdram_memblock(void) { }
-static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
- unsigned long sram_vstart,
- unsigned long sram_size,
- unsigned long pstart_avail,
- unsigned long size_avail)
-{
- return 0;
-}
#endif
#endif
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ad80112c227..ad32621aa52 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -307,7 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
if (!--mbox->use_count) {
free_irq(mbox->irq, mbox);
tasklet_kill(&mbox->txq->tasklet);
- flush_work_sync(&mbox->rxq->work);
+ flush_work_sync(&mbox->rxq->work);
mbox_queue_free(mbox->txq);
mbox_queue_free(mbox->rxq);
}
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
deleted file mode 100644
index 4b15cd7926d..00000000000
--- a/arch/arm/plat-omap/mcbsp.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/*
- * linux/arch/arm/plat-omap/mcbsp.c
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Samuel Ortiz <samuel.ortiz@nokia.com>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Multichannel mode not supported.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <plat/mcbsp.h>
-#include <linux/pm_runtime.h>
-
-struct omap_mcbsp **mcbsp_ptr;
-int omap_mcbsp_count;
-
-#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
-
-static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
-{
- void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
-
- if (mcbsp->pdata->reg_size == 2) {
- ((u16 *)mcbsp->reg_cache)[reg] = (u16)val;
- __raw_writew((u16)val, addr);
- } else {
- ((u32 *)mcbsp->reg_cache)[reg] = val;
- __raw_writel(val, addr);
- }
-}
-
-static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache)
-{
- void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step;
-
- if (mcbsp->pdata->reg_size == 2) {
- return !from_cache ? __raw_readw(addr) :
- ((u16 *)mcbsp->reg_cache)[reg];
- } else {
- return !from_cache ? __raw_readl(addr) :
- ((u32 *)mcbsp->reg_cache)[reg];
- }
-}
-
-static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
-{
- __raw_writel(val, mcbsp->st_data->io_base_st + reg);
-}
-
-static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
-{
- return __raw_readl(mcbsp->st_data->io_base_st + reg);
-}
-
-#define MCBSP_READ(mcbsp, reg) \
- omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
-#define MCBSP_WRITE(mcbsp, reg, val) \
- omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val)
-#define MCBSP_READ_CACHE(mcbsp, reg) \
- omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1)
-
-#define MCBSP_ST_READ(mcbsp, reg) \
- omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg)
-#define MCBSP_ST_WRITE(mcbsp, reg, val) \
- omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val)
-
-static void omap_mcbsp_dump_reg(u8 id)
-{
- struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
-
- dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id);
- dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n",
- MCBSP_READ(mcbsp, DRR2));
- dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n",
- MCBSP_READ(mcbsp, DRR1));
- dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n",
- MCBSP_READ(mcbsp, DXR2));
- dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n",
- MCBSP_READ(mcbsp, DXR1));
- dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n",
- MCBSP_READ(mcbsp, SPCR2));
- dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n",
- MCBSP_READ(mcbsp, SPCR1));
- dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n",
- MCBSP_READ(mcbsp, RCR2));
- dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n",
- MCBSP_READ(mcbsp, RCR1));
- dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n",
- MCBSP_READ(mcbsp, XCR2));
- dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n",
- MCBSP_READ(mcbsp, XCR1));
- dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n",
- MCBSP_READ(mcbsp, SRGR2));
- dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n",
- MCBSP_READ(mcbsp, SRGR1));
- dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n",
- MCBSP_READ(mcbsp, PCR0));
- dev_dbg(mcbsp->dev, "***********************\n");
-}
-
-static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
-{
- struct omap_mcbsp *mcbsp_tx = dev_id;
- u16 irqst_spcr2;
-
- irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2);
- dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
-
- if (irqst_spcr2 & XSYNC_ERR) {
- dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
- irqst_spcr2);
- /* Writing zero to XSYNC_ERR clears the IRQ */
- MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2));
- }
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
-{
- struct omap_mcbsp *mcbsp_rx = dev_id;
- u16 irqst_spcr1;
-
- irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1);
- dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
-
- if (irqst_spcr1 & RSYNC_ERR) {
- dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
- irqst_spcr1);
- /* Writing zero to RSYNC_ERR clears the IRQ */
- MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * omap_mcbsp_config simply write a config to the
- * appropriate McBSP.
- * You either call this function or set the McBSP registers
- * by yourself before calling omap_mcbsp_start().
- */
-void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n",
- mcbsp->id, mcbsp->phys_base);
-
- /* We write the given config */
- MCBSP_WRITE(mcbsp, SPCR2, config->spcr2);
- MCBSP_WRITE(mcbsp, SPCR1, config->spcr1);
- MCBSP_WRITE(mcbsp, RCR2, config->rcr2);
- MCBSP_WRITE(mcbsp, RCR1, config->rcr1);
- MCBSP_WRITE(mcbsp, XCR2, config->xcr2);
- MCBSP_WRITE(mcbsp, XCR1, config->xcr1);
- MCBSP_WRITE(mcbsp, SRGR2, config->srgr2);
- MCBSP_WRITE(mcbsp, SRGR1, config->srgr1);
- MCBSP_WRITE(mcbsp, MCR2, config->mcr2);
- MCBSP_WRITE(mcbsp, MCR1, config->mcr1);
- MCBSP_WRITE(mcbsp, PCR0, config->pcr0);
- if (mcbsp->pdata->has_ccr) {
- MCBSP_WRITE(mcbsp, XCCR, config->xccr);
- MCBSP_WRITE(mcbsp, RCCR, config->rccr);
- }
-}
-EXPORT_SYMBOL(omap_mcbsp_config);
-
-/**
- * omap_mcbsp_dma_params - returns the dma channel number
- * @id - mcbsp id
- * @stream - indicates the direction of data flow (rx or tx)
- *
- * Returns the dma channel number for the rx channel or tx channel
- * based on the value of @stream for the requested mcbsp given by @id
- */
-int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (stream)
- return mcbsp->dma_rx_sync;
- else
- return mcbsp->dma_tx_sync;
-}
-EXPORT_SYMBOL(omap_mcbsp_dma_ch_params);
-
-/**
- * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register
- * @id - mcbsp id
- * @stream - indicates the direction of data flow (rx or tx)
- *
- * Returns the address of mcbsp data transmit register or data receive register
- * to be used by DMA for transferring/receiving data based on the value of
- * @stream for the requested mcbsp given by @id
- */
-int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream)
-{
- struct omap_mcbsp *mcbsp;
- int data_reg;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (mcbsp->pdata->reg_size == 2) {
- if (stream)
- data_reg = OMAP_MCBSP_REG_DRR1;
- else
- data_reg = OMAP_MCBSP_REG_DXR1;
- } else {
- if (stream)
- data_reg = OMAP_MCBSP_REG_DRR;
- else
- data_reg = OMAP_MCBSP_REG_DXR;
- }
-
- return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step;
-}
-EXPORT_SYMBOL(omap_mcbsp_dma_reg_params);
-
-static void omap_st_on(struct omap_mcbsp *mcbsp)
-{
- unsigned int w;
-
- if (mcbsp->pdata->enable_st_clock)
- mcbsp->pdata->enable_st_clock(mcbsp->id, 1);
-
- /* Enable McBSP Sidetone */
- w = MCBSP_READ(mcbsp, SSELCR);
- MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN);
-
- /* Enable Sidetone from Sidetone Core */
- w = MCBSP_ST_READ(mcbsp, SSELCR);
- MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN);
-}
-
-static void omap_st_off(struct omap_mcbsp *mcbsp)
-{
- unsigned int w;
-
- w = MCBSP_ST_READ(mcbsp, SSELCR);
- MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
-
- w = MCBSP_READ(mcbsp, SSELCR);
- MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
-
- if (mcbsp->pdata->enable_st_clock)
- mcbsp->pdata->enable_st_clock(mcbsp->id, 0);
-}
-
-static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
-{
- u16 val, i;
-
- val = MCBSP_ST_READ(mcbsp, SSELCR);
-
- if (val & ST_COEFFWREN)
- MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
-
- MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN);
-
- for (i = 0; i < 128; i++)
- MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]);
-
- i = 0;
-
- val = MCBSP_ST_READ(mcbsp, SSELCR);
- while (!(val & ST_COEFFWRDONE) && (++i < 1000))
- val = MCBSP_ST_READ(mcbsp, SSELCR);
-
- MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
-
- if (i == 1000)
- dev_err(mcbsp->dev, "McBSP FIR load error!\n");
-}
-
-static void omap_st_chgain(struct omap_mcbsp *mcbsp)
-{
- u16 w;
- struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
-
- w = MCBSP_ST_READ(mcbsp, SSELCR);
-
- MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \
- ST_CH1GAIN(st_data->ch1gain));
-}
-
-int omap_st_set_chgain(unsigned int id, int channel, s16 chgain)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_st_data *st_data;
- int ret = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
- st_data = mcbsp->st_data;
-
- if (!st_data)
- return -ENOENT;
-
- spin_lock_irq(&mcbsp->lock);
- if (channel == 0)
- st_data->ch0gain = chgain;
- else if (channel == 1)
- st_data->ch1gain = chgain;
- else
- ret = -EINVAL;
-
- if (st_data->enabled)
- omap_st_chgain(mcbsp);
- spin_unlock_irq(&mcbsp->lock);
-
- return ret;
-}
-EXPORT_SYMBOL(omap_st_set_chgain);
-
-int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_st_data *st_data;
- int ret = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
- st_data = mcbsp->st_data;
-
- if (!st_data)
- return -ENOENT;
-
- spin_lock_irq(&mcbsp->lock);
- if (channel == 0)
- *chgain = st_data->ch0gain;
- else if (channel == 1)
- *chgain = st_data->ch1gain;
- else
- ret = -EINVAL;
- spin_unlock_irq(&mcbsp->lock);
-
- return ret;
-}
-EXPORT_SYMBOL(omap_st_get_chgain);
-
-static int omap_st_start(struct omap_mcbsp *mcbsp)
-{
- struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
-
- if (st_data && st_data->enabled && !st_data->running) {
- omap_st_fir_write(mcbsp, st_data->taps);
- omap_st_chgain(mcbsp);
-
- if (!mcbsp->free) {
- omap_st_on(mcbsp);
- st_data->running = 1;
- }
- }
-
- return 0;
-}
-
-int omap_st_enable(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_st_data *st_data;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
- st_data = mcbsp->st_data;
-
- if (!st_data)
- return -ENODEV;
-
- spin_lock_irq(&mcbsp->lock);
- st_data->enabled = 1;
- omap_st_start(mcbsp);
- spin_unlock_irq(&mcbsp->lock);
-
- return 0;
-}
-EXPORT_SYMBOL(omap_st_enable);
-
-static int omap_st_stop(struct omap_mcbsp *mcbsp)
-{
- struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
-
- if (st_data && st_data->running) {
- if (!mcbsp->free) {
- omap_st_off(mcbsp);
- st_data->running = 0;
- }
- }
-
- return 0;
-}
-
-int omap_st_disable(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_st_data *st_data;
- int ret = 0;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
- st_data = mcbsp->st_data;
-
- if (!st_data)
- return -ENODEV;
-
- spin_lock_irq(&mcbsp->lock);
- omap_st_stop(mcbsp);
- st_data->enabled = 0;
- spin_unlock_irq(&mcbsp->lock);
-
- return ret;
-}
-EXPORT_SYMBOL(omap_st_disable);
-
-int omap_st_is_enabled(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- struct omap_mcbsp_st_data *st_data;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
- st_data = mcbsp->st_data;
-
- if (!st_data)
- return -ENODEV;
-
-
- return st_data->enabled;
-}
-EXPORT_SYMBOL(omap_st_is_enabled);
-
-/*
- * omap_mcbsp_set_rx_threshold configures the transmit threshold in words.
- * The threshold parameter is 1 based, and it is converted (threshold - 1)
- * for the THRSH2 register.
- */
-void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp->pdata->buffer_size == 0)
- return;
-
- if (threshold && threshold <= mcbsp->max_tx_thres)
- MCBSP_WRITE(mcbsp, THRSH2, threshold - 1);
-}
-EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
-
-/*
- * omap_mcbsp_set_rx_threshold configures the receive threshold in words.
- * The threshold parameter is 1 based, and it is converted (threshold - 1)
- * for the THRSH1 register.
- */
-void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp->pdata->buffer_size == 0)
- return;
-
- if (threshold && threshold <= mcbsp->max_rx_thres)
- MCBSP_WRITE(mcbsp, THRSH1, threshold - 1);
-}
-EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
-
-/*
- * omap_mcbsp_get_max_tx_thres just return the current configured
- * maximum threshold for transmission
- */
-u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- return mcbsp->max_tx_thres;
-}
-EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
-
-/*
- * omap_mcbsp_get_max_rx_thres just return the current configured
- * maximum threshold for reception
- */
-u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- return mcbsp->max_rx_thres;
-}
-EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
-
-u16 omap_mcbsp_get_fifo_size(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- return mcbsp->pdata->buffer_size;
-}
-EXPORT_SYMBOL(omap_mcbsp_get_fifo_size);
-
-/*
- * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO
- */
-u16 omap_mcbsp_get_tx_delay(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- u16 buffstat;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp->pdata->buffer_size == 0)
- return 0;
-
- /* Returns the number of free locations in the buffer */
- buffstat = MCBSP_READ(mcbsp, XBUFFSTAT);
-
- /* Number of slots are different in McBSP ports */
- return mcbsp->pdata->buffer_size - buffstat;
-}
-EXPORT_SYMBOL(omap_mcbsp_get_tx_delay);
-
-/*
- * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO
- * to reach the threshold value (when the DMA will be triggered to read it)
- */
-u16 omap_mcbsp_get_rx_delay(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- u16 buffstat, threshold;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
- if (mcbsp->pdata->buffer_size == 0)
- return 0;
-
- /* Returns the number of used locations in the buffer */
- buffstat = MCBSP_READ(mcbsp, RBUFFSTAT);
- /* RX threshold */
- threshold = MCBSP_READ(mcbsp, THRSH1);
-
- /* Return the number of location till we reach the threshold limit */
- if (threshold <= buffstat)
- return 0;
- else
- return threshold - buffstat;
-}
-EXPORT_SYMBOL(omap_mcbsp_get_rx_delay);
-
-/*
- * omap_mcbsp_get_dma_op_mode just return the current configured
- * operating mode for the mcbsp channel
- */
-int omap_mcbsp_get_dma_op_mode(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- int dma_op_mode;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- dma_op_mode = mcbsp->dma_op_mode;
-
- return dma_op_mode;
-}
-EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-
-int omap_mcbsp_request(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- void *reg_cache;
- int err;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return -ENODEV;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL);
- if (!reg_cache) {
- return -ENOMEM;
- }
-
- spin_lock(&mcbsp->lock);
- if (!mcbsp->free) {
- dev_err(mcbsp->dev, "McBSP%d is currently in use\n",
- mcbsp->id);
- err = -EBUSY;
- goto err_kfree;
- }
-
- mcbsp->free = false;
- mcbsp->reg_cache = reg_cache;
- spin_unlock(&mcbsp->lock);
-
- if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request)
- mcbsp->pdata->ops->request(id);
-
- pm_runtime_get_sync(mcbsp->dev);
-
- /* Enable wakeup behavior */
- if (mcbsp->pdata->has_wakeup)
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
-
- /*
- * Make sure that transmitter, receiver and sample-rate generator are
- * not running before activating IRQs.
- */
- MCBSP_WRITE(mcbsp, SPCR1, 0);
- MCBSP_WRITE(mcbsp, SPCR2, 0);
-
- err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler,
- 0, "McBSP", (void *)mcbsp);
- if (err != 0) {
- dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
- "for McBSP%d\n", mcbsp->tx_irq,
- mcbsp->id);
- goto err_clk_disable;
- }
-
- if (mcbsp->rx_irq) {
- err = request_irq(mcbsp->rx_irq,
- omap_mcbsp_rx_irq_handler,
- 0, "McBSP", (void *)mcbsp);
- if (err != 0) {
- dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
- "for McBSP%d\n", mcbsp->rx_irq,
- mcbsp->id);
- goto err_free_irq;
- }
- }
-
- return 0;
-err_free_irq:
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
-err_clk_disable:
- if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
- mcbsp->pdata->ops->free(id);
-
- /* Disable wakeup behavior */
- if (mcbsp->pdata->has_wakeup)
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
-
- pm_runtime_put_sync(mcbsp->dev);
-
- spin_lock(&mcbsp->lock);
- mcbsp->free = true;
- mcbsp->reg_cache = NULL;
-err_kfree:
- spin_unlock(&mcbsp->lock);
- kfree(reg_cache);
-
- return err;
-}
-EXPORT_SYMBOL(omap_mcbsp_request);
-
-void omap_mcbsp_free(unsigned int id)
-{
- struct omap_mcbsp *mcbsp;
- void *reg_cache;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
- mcbsp->pdata->ops->free(id);
-
- /* Disable wakeup behavior */
- if (mcbsp->pdata->has_wakeup)
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
-
- pm_runtime_put_sync(mcbsp->dev);
-
- if (mcbsp->rx_irq)
- free_irq(mcbsp->rx_irq, (void *)mcbsp);
- free_irq(mcbsp->tx_irq, (void *)mcbsp);
-
- reg_cache = mcbsp->reg_cache;
-
- spin_lock(&mcbsp->lock);
- if (mcbsp->free)
- dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
- else
- mcbsp->free = true;
- mcbsp->reg_cache = NULL;
- spin_unlock(&mcbsp->lock);
-
- if (reg_cache)
- kfree(reg_cache);
-}
-EXPORT_SYMBOL(omap_mcbsp_free);
-
-/*
- * Here we start the McBSP, by enabling transmitter, receiver or both.
- * If no transmitter or receiver is active prior calling, then sample-rate
- * generator and frame sync are started.
- */
-void omap_mcbsp_start(unsigned int id, int tx, int rx)
-{
- struct omap_mcbsp *mcbsp;
- int enable_srg = 0;
- u16 w;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (mcbsp->st_data)
- omap_st_start(mcbsp);
-
- /* Only enable SRG, if McBSP is master */
- w = MCBSP_READ_CACHE(mcbsp, PCR0);
- if (w & (FSXM | FSRM | CLKXM | CLKRM))
- enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
- MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
-
- if (enable_srg) {
- /* Start the sample generator */
- w = MCBSP_READ_CACHE(mcbsp, SPCR2);
- MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6));
- }
-
- /* Enable transmitter and receiver */
- tx &= 1;
- w = MCBSP_READ_CACHE(mcbsp, SPCR2);
- MCBSP_WRITE(mcbsp, SPCR2, w | tx);
-
- rx &= 1;
- w = MCBSP_READ_CACHE(mcbsp, SPCR1);
- MCBSP_WRITE(mcbsp, SPCR1, w | rx);
-
- /*
- * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
- * REVISIT: 100us may give enough time for two CLKSRG, however
- * due to some unknown PM related, clock gating etc. reason it
- * is now at 500us.
- */
- udelay(500);
-
- if (enable_srg) {
- /* Start frame sync */
- w = MCBSP_READ_CACHE(mcbsp, SPCR2);
- MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7));
- }
-
- if (mcbsp->pdata->has_ccr) {
- /* Release the transmitter and receiver */
- w = MCBSP_READ_CACHE(mcbsp, XCCR);
- w &= ~(tx ? XDISABLE : 0);
- MCBSP_WRITE(mcbsp, XCCR, w);
- w = MCBSP_READ_CACHE(mcbsp, RCCR);
- w &= ~(rx ? RDISABLE : 0);
- MCBSP_WRITE(mcbsp, RCCR, w);
- }
-
- /* Dump McBSP Regs */
- omap_mcbsp_dump_reg(id);
-}
-EXPORT_SYMBOL(omap_mcbsp_start);
-
-void omap_mcbsp_stop(unsigned int id, int tx, int rx)
-{
- struct omap_mcbsp *mcbsp;
- int idle;
- u16 w;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
- return;
- }
-
- mcbsp = id_to_mcbsp_ptr(id);
-
- /* Reset transmitter */
- tx &= 1;
- if (mcbsp->pdata->has_ccr) {
- w = MCBSP_READ_CACHE(mcbsp, XCCR);
- w |= (tx ? XDISABLE : 0);
- MCBSP_WRITE(mcbsp, XCCR, w);
- }
- w = MCBSP_READ_CACHE(mcbsp, SPCR2);
- MCBSP_WRITE(mcbsp, SPCR2, w & ~tx);
-
- /* Reset receiver */
- rx &= 1;
- if (mcbsp->pdata->has_ccr) {
- w = MCBSP_READ_CACHE(mcbsp, RCCR);
- w |= (rx ? RDISABLE : 0);
- MCBSP_WRITE(mcbsp, RCCR, w);
- }
- w = MCBSP_READ_CACHE(mcbsp, SPCR1);
- MCBSP_WRITE(mcbsp, SPCR1, w & ~rx);
-
- idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) |
- MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1);
-
- if (idle) {
- /* Reset the sample rate generator */
- w = MCBSP_READ_CACHE(mcbsp, SPCR2);
- MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
- }
-
- if (mcbsp->st_data)
- omap_st_stop(mcbsp);
-}
-EXPORT_SYMBOL(omap_mcbsp_stop);
-
-int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
-{
- struct omap_mcbsp *mcbsp;
- const char *src;
-
- if (!omap_mcbsp_check_valid_id(id)) {
- pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
- return -EINVAL;
- }
- mcbsp = id_to_mcbsp_ptr(id);
-
- if (fck_src_id == MCBSP_CLKS_PAD_SRC)
- src = "clks_ext";
- else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
- src = "clks_fclk";
- else
- return -EINVAL;
-
- if (mcbsp->pdata->set_clk_src)
- return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src);
- else
- return -EINVAL;
-}
-EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
-
-void omap2_mcbsp1_mux_clkr_src(u8 mux)
-{
- struct omap_mcbsp *mcbsp;
- const char *src;
-
- if (mux == CLKR_SRC_CLKR)
- src = "clkr";
- else if (mux == CLKR_SRC_CLKX)
- src = "clkx";
- else
- return;
-
- mcbsp = id_to_mcbsp_ptr(0);
- if (mcbsp->pdata->mux_signal)
- mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
-
-void omap2_mcbsp1_mux_fsr_src(u8 mux)
-{
- struct omap_mcbsp *mcbsp;
- const char *src;
-
- if (mux == FSR_SRC_FSR)
- src = "fsr";
- else if (mux == FSR_SRC_FSX)
- src = "fsx";
- else
- return;
-
- mcbsp = id_to_mcbsp_ptr(0);
- if (mcbsp->pdata->mux_signal)
- mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src);
-}
-EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
-
-#define max_thres(m) (mcbsp->pdata->buffer_size)
-#define valid_threshold(m, val) ((val) <= max_thres(m))
-#define THRESHOLD_PROP_BUILDER(prop) \
-static ssize_t prop##_show(struct device *dev, \
- struct device_attribute *attr, char *buf) \
-{ \
- struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
- \
- return sprintf(buf, "%u\n", mcbsp->prop); \
-} \
- \
-static ssize_t prop##_store(struct device *dev, \
- struct device_attribute *attr, \
- const char *buf, size_t size) \
-{ \
- struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \
- unsigned long val; \
- int status; \
- \
- status = strict_strtoul(buf, 0, &val); \
- if (status) \
- return status; \
- \
- if (!valid_threshold(mcbsp, val)) \
- return -EDOM; \
- \
- mcbsp->prop = val; \
- return size; \
-} \
- \
-static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
-
-THRESHOLD_PROP_BUILDER(max_tx_thres);
-THRESHOLD_PROP_BUILDER(max_rx_thres);
-
-static const char *dma_op_modes[] = {
- "element", "threshold", "frame",
-};
-
-static ssize_t dma_op_mode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
- int dma_op_mode, i = 0;
- ssize_t len = 0;
- const char * const *s;
-
- dma_op_mode = mcbsp->dma_op_mode;
-
- for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
- if (dma_op_mode == i)
- len += sprintf(buf + len, "[%s] ", *s);
- else
- len += sprintf(buf + len, "%s ", *s);
- }
- len += sprintf(buf + len, "\n");
-
- return len;
-}
-
-static ssize_t dma_op_mode_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
- const char * const *s;
- int i = 0;
-
- for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
- if (sysfs_streq(buf, *s))
- break;
-
- if (i == ARRAY_SIZE(dma_op_modes))
- return -EINVAL;
-
- spin_lock_irq(&mcbsp->lock);
- if (!mcbsp->free) {
- size = -EBUSY;
- goto unlock;
- }
- mcbsp->dma_op_mode = i;
-
-unlock:
- spin_unlock_irq(&mcbsp->lock);
-
- return size;
-}
-
-static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
-
-static const struct attribute *additional_attrs[] = {
- &dev_attr_max_tx_thres.attr,
- &dev_attr_max_rx_thres.attr,
- &dev_attr_dma_op_mode.attr,
- NULL,
-};
-
-static const struct attribute_group additional_attr_group = {
- .attrs = (struct attribute **)additional_attrs,
-};
-
-static ssize_t st_taps_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
- struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- ssize_t status = 0;
- int i;
-
- spin_lock_irq(&mcbsp->lock);
- for (i = 0; i < st_data->nr_taps; i++)
- status += sprintf(&buf[status], (i ? ", %d" : "%d"),
- st_data->taps[i]);
- if (i)
- status += sprintf(&buf[status], "\n");
- spin_unlock_irq(&mcbsp->lock);
-
- return status;
-}
-
-static ssize_t st_taps_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t size)
-{
- struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
- struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
- int val, tmp, status, i = 0;
-
- spin_lock_irq(&mcbsp->lock);
- memset(st_data->taps, 0, sizeof(st_data->taps));
- st_data->nr_taps = 0;
-
- do {
- status = sscanf(buf, "%d%n", &val, &tmp);
- if (status < 0 || status == 0) {
- size = -EINVAL;
- goto out;
- }
- if (val < -32768 || val > 32767) {
- size = -EINVAL;
- goto out;
- }
- st_data->taps[i++] = val;
- buf += tmp;
- if (*buf != ',')
- break;
- buf++;
- } while (1);
-
- st_data->nr_taps = i;
-
-out:
- spin_unlock_irq(&mcbsp->lock);
-
- return size;
-}
-
-static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
-
-static const struct attribute *sidetone_attrs[] = {
- &dev_attr_st_taps.attr,
- NULL,
-};
-
-static const struct attribute_group sidetone_attr_group = {
- .attrs = (struct attribute **)sidetone_attrs,
-};
-
-static int __devinit omap_st_add(struct omap_mcbsp *mcbsp,
- struct resource *res)
-{
- struct omap_mcbsp_st_data *st_data;
- int err;
-
- st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL);
- if (!st_data) {
- err = -ENOMEM;
- goto err1;
- }
-
- st_data->io_base_st = ioremap(res->start, resource_size(res));
- if (!st_data->io_base_st) {
- err = -ENOMEM;
- goto err2;
- }
-
- err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- if (err)
- goto err3;
-
- mcbsp->st_data = st_data;
- return 0;
-
-err3:
- iounmap(st_data->io_base_st);
-err2:
- kfree(st_data);
-err1:
- return err;
-
-}
-
-static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp)
-{
- struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
-
- sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
- iounmap(st_data->io_base_st);
- kfree(st_data);
-}
-
-/*
- * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
- * 730 has only 2 McBSP, and both of them are MPU peripherals.
- */
-static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
-{
- struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data;
- struct omap_mcbsp *mcbsp;
- int id = pdev->id - 1;
- struct resource *res;
- int ret = 0;
-
- if (!pdata) {
- dev_err(&pdev->dev, "McBSP device initialized without"
- "platform data\n");
- ret = -EINVAL;
- goto exit;
- }
-
- dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id);
-
- if (id >= omap_mcbsp_count) {
- dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id);
- ret = -EINVAL;
- goto exit;
- }
-
- mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL);
- if (!mcbsp) {
- ret = -ENOMEM;
- goto exit;
- }
-
- spin_lock_init(&mcbsp->lock);
- mcbsp->id = id + 1;
- mcbsp->free = true;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
- if (!res) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "%s:mcbsp%d has invalid memory"
- "resource\n", __func__, pdev->id);
- ret = -ENOMEM;
- goto exit;
- }
- }
- mcbsp->phys_base = res->start;
- mcbsp->reg_cache_size = resource_size(res);
- mcbsp->io_base = ioremap(res->start, resource_size(res));
- if (!mcbsp->io_base) {
- ret = -ENOMEM;
- goto err_ioremap;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
- if (!res)
- mcbsp->phys_dma_base = mcbsp->phys_base;
- else
- mcbsp->phys_dma_base = res->start;
-
- mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
- mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
-
- /* From OMAP4 there will be a single irq line */
- if (mcbsp->tx_irq == -ENXIO)
- mcbsp->tx_irq = platform_get_irq(pdev, 0);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
- if (!res) {
- dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n",
- __func__, pdev->id);
- ret = -ENODEV;
- goto err_res;
- }
- mcbsp->dma_rx_sync = res->start;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
- if (!res) {
- dev_err(&pdev->dev, "%s:mcbsp%d has invalid tx DMA channel\n",
- __func__, pdev->id);
- ret = -ENODEV;
- goto err_res;
- }
- mcbsp->dma_tx_sync = res->start;
-
- mcbsp->fclk = clk_get(&pdev->dev, "fck");
- if (IS_ERR(mcbsp->fclk)) {
- ret = PTR_ERR(mcbsp->fclk);
- dev_err(&pdev->dev, "unable to get fck: %d\n", ret);
- goto err_res;
- }
-
- mcbsp->pdata = pdata;
- mcbsp->dev = &pdev->dev;
- mcbsp_ptr[id] = mcbsp;
- platform_set_drvdata(pdev, mcbsp);
- pm_runtime_enable(mcbsp->dev);
-
- mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
- if (mcbsp->pdata->buffer_size) {
- /*
- * Initially configure the maximum thresholds to a safe value.
- * The McBSP FIFO usage with these values should not go under
- * 16 locations.
- * If the whole FIFO without safety buffer is used, than there
- * is a possibility that the DMA will be not able to push the
- * new data on time, causing channel shifts in runtime.
- */
- mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10;
- mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10;
-
- ret = sysfs_create_group(&mcbsp->dev->kobj,
- &additional_attr_group);
- if (ret) {
- dev_err(mcbsp->dev,
- "Unable to create additional controls\n");
- goto err_thres;
- }
- } else {
- mcbsp->max_tx_thres = -EINVAL;
- mcbsp->max_rx_thres = -EINVAL;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone");
- if (res) {
- ret = omap_st_add(mcbsp, res);
- if (ret) {
- dev_err(mcbsp->dev,
- "Unable to create sidetone controls\n");
- goto err_st;
- }
- }
-
- return 0;
-
-err_st:
- if (mcbsp->pdata->buffer_size)
- sysfs_remove_group(&mcbsp->dev->kobj,
- &additional_attr_group);
-err_thres:
- clk_put(mcbsp->fclk);
-err_res:
- iounmap(mcbsp->io_base);
-err_ioremap:
- kfree(mcbsp);
-exit:
- return ret;
-}
-
-static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
-{
- struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev);
-
- platform_set_drvdata(pdev, NULL);
- if (mcbsp) {
-
- if (mcbsp->pdata && mcbsp->pdata->ops &&
- mcbsp->pdata->ops->free)
- mcbsp->pdata->ops->free(mcbsp->id);
-
- if (mcbsp->pdata->buffer_size)
- sysfs_remove_group(&mcbsp->dev->kobj,
- &additional_attr_group);
-
- if (mcbsp->st_data)
- omap_st_remove(mcbsp);
-
- clk_put(mcbsp->fclk);
-
- iounmap(mcbsp->io_base);
- kfree(mcbsp);
- }
-
- return 0;
-}
-
-static struct platform_driver omap_mcbsp_driver = {
- .probe = omap_mcbsp_probe,
- .remove = __devexit_p(omap_mcbsp_remove),
- .driver = {
- .name = "omap-mcbsp",
- },
-};
-
-int __init omap_mcbsp_init(void)
-{
- /* Register the McBSP driver */
- return platform_driver_register(&omap_mcbsp_driver);
-}
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 0d4aa0d5876..cff8712122b 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -26,8 +26,11 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
-#include <asm/system.h>
#include <linux/spinlock.h>
+
+#include <asm/system.h>
+
+#include <plat/cpu.h>
#include <plat/mux.h>
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index 3dc3801aace..5a97b4d98d4 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -319,7 +319,7 @@ int omap_pm_get_dev_context_loss_count(struct device *dev)
if (WARN_ON(!dev))
return -ENODEV;
- if (dev->parent == &omap_device_parent) {
+ if (dev->pm_domain == &omap_device_pm_domain) {
count = omap_device_get_context_loss_count(pdev);
} else {
WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index e8d98693d2d..d50cbc6385b 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -1,3 +1,4 @@
+
/*
* omap_device implementation
*
@@ -97,14 +98,7 @@
#define USE_WAKEUP_LAT 0
#define IGNORE_WAKEUP_LAT 1
-static int omap_device_register(struct platform_device *pdev);
static int omap_early_device_register(struct platform_device *pdev);
-static struct omap_device *omap_device_alloc(struct platform_device *pdev,
- struct omap_hwmod **ohs, int oh_cnt,
- struct omap_device_pm_latency *pm_lats,
- int pm_lats_cnt);
-static void omap_device_delete(struct omap_device *od);
-
static struct omap_device_pm_latency omap_default_latency[] = {
{
@@ -320,8 +314,6 @@ static void _add_hwmod_clocks_clkdev(struct omap_device *od,
}
-static struct dev_pm_domain omap_device_pm_domain;
-
/**
* omap_device_build_from_dt - build an omap_device with multiple hwmods
* @pdev_name: name of the platform_device driver to use
@@ -348,7 +340,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
oh_cnt = of_property_count_strings(node, "ti,hwmods");
if (!oh_cnt || IS_ERR_VALUE(oh_cnt)) {
- dev_warn(&pdev->dev, "No 'hwmods' to build omap_device\n");
+ dev_dbg(&pdev->dev, "No 'hwmods' to build omap_device\n");
return -ENODEV;
}
@@ -509,7 +501,7 @@ static int omap_device_fill_resources(struct omap_device *od,
*
* Returns an struct omap_device pointer or ERR_PTR() on error;
*/
-static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
struct omap_hwmod **ohs, int oh_cnt,
struct omap_device_pm_latency *pm_lats,
int pm_lats_cnt)
@@ -591,7 +583,7 @@ oda_exit1:
return ERR_PTR(ret);
}
-static void omap_device_delete(struct omap_device *od)
+void omap_device_delete(struct omap_device *od)
{
if (!od)
return;
@@ -619,7 +611,7 @@ static void omap_device_delete(struct omap_device *od)
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
* passes along the return value of omap_device_build_ss().
*/
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
struct omap_hwmod *oh, void *pdata,
int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -652,7 +644,7 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
* platform_device record. Returns an ERR_PTR() on error, or passes
* along the return value of omap_device_register().
*/
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
struct omap_hwmod **ohs, int oh_cnt,
void *pdata, int pdata_len,
struct omap_device_pm_latency *pm_lats,
@@ -717,7 +709,7 @@ odbs_exit:
* platform_early_add_device() on the underlying platform_device.
* Returns 0 by default.
*/
-static int omap_early_device_register(struct platform_device *pdev)
+static int __init omap_early_device_register(struct platform_device *pdev)
{
struct platform_device *devices[1];
@@ -762,14 +754,12 @@ static int _od_suspend_noirq(struct device *dev)
struct omap_device *od = to_omap_device(pdev);
int ret;
- if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
- return pm_generic_suspend_noirq(dev);
-
ret = pm_generic_suspend_noirq(dev);
if (!ret && !pm_runtime_status_suspended(dev)) {
if (pm_generic_runtime_suspend(dev) == 0) {
- omap_device_idle(pdev);
+ if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+ omap_device_idle(pdev);
od->flags |= OMAP_DEVICE_SUSPENDED;
}
}
@@ -782,13 +772,11 @@ static int _od_resume_noirq(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
- if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
- return pm_generic_resume_noirq(dev);
-
if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
!pm_runtime_status_suspended(dev)) {
od->flags &= ~OMAP_DEVICE_SUSPENDED;
- omap_device_enable(pdev);
+ if (!(od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND))
+ omap_device_enable(pdev);
pm_generic_runtime_resume(dev);
}
@@ -799,7 +787,7 @@ static int _od_resume_noirq(struct device *dev)
#define _od_resume_noirq NULL
#endif
-static struct dev_pm_domain omap_device_pm_domain = {
+struct dev_pm_domain omap_device_pm_domain = {
.ops = {
SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
_od_runtime_idle)
@@ -817,11 +805,10 @@ static struct dev_pm_domain omap_device_pm_domain = {
* platform_device_register() on the underlying platform_device.
* Returns the return value of platform_device_register().
*/
-static int omap_device_register(struct platform_device *pdev)
+int omap_device_register(struct platform_device *pdev)
{
pr_debug("omap_device: %s: registering\n", pdev->name);
- pdev->dev.parent = &omap_device_parent;
pdev->dev.pm_domain = &omap_device_pm_domain;
return platform_device_add(pdev);
}
@@ -1130,11 +1117,6 @@ int omap_device_enable_clocks(struct omap_device *od)
return 0;
}
-struct device omap_device_parent = {
- .init_name = "omap",
- .parent = &platform_bus,
-};
-
static struct notifier_block platform_nb = {
.notifier_call = _omap_device_notifier_call,
};
@@ -1142,6 +1124,6 @@ static struct notifier_block platform_nb = {
static int __init omap_device_init(void)
{
bus_register_notifier(&platform_bus_type, &platform_nb);
- return device_register(&omap_device_parent);
+ return 0;
}
core_initcall(omap_device_init);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4243bdcc87b..f9a8c5341ee 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -31,11 +31,10 @@
#include "sram.h"
-/* XXX These "sideways" includes are a sign that something is wrong */
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/prm2xxx_3xxx.h"
-# include "../mach-omap2/sdrc.h"
-#endif
+/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
+#include "../mach-omap2/iomap.h"
+#include "../mach-omap2/prm2xxx_3xxx.h"
+#include "../mach-omap2/sdrc.h"
#define OMAP1_SRAM_PA 0x20000000
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
@@ -86,7 +85,7 @@ static int is_sram_locked(void)
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
@@ -124,7 +123,10 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x800; /* 2K */
}
} else {
- if (cpu_is_omap34xx()) {
+ if (cpu_is_am33xx()) {
+ omap_sram_start = AM33XX_SRAM_PA;
+ omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
@@ -346,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
-#ifdef CONFIG_PM
void omap3_sram_restore_context(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
@@ -356,15 +357,21 @@ void omap3_sram_restore_context(void)
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
-#endif /* CONFIG_PM */
-
-#endif /* CONFIG_ARCH_OMAP3 */
static inline int omap34xx_sram_init(void)
{
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
omap3_sram_restore_context();
-#endif
+ return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+ return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+static inline int am33xx_sram_init(void)
+{
return 0;
}
@@ -379,6 +386,8 @@ int __init omap_sram_init(void)
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
+ else if (cpu_is_am33xx())
+ am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index f3570884883..d2bbfd1cb0b 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -29,6 +29,10 @@
#include <plat/usb.h>
#include <plat/board.h>
+#include <mach/hardware.h>
+
+#include "../mach-omap2/common.h"
+
#ifdef CONFIG_ARCH_OMAP_OTG
void __init