summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-tegra/include/mach/uncompress.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-tegra/include/mach/uncompress.h')
-rw-r--r--arch/arm/mach-tegra/include/mach/uncompress.h176
1 files changed, 125 insertions, 51 deletions
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 5a440f3..937c4c5 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -63,52 +63,86 @@ static inline void save_uart_address(void)
buf[0] = 0;
}
-/*
- * Setup before decompression. This is where we do UART selection for
- * earlyprintk and init the uart_base register.
- */
-static inline void arch_decomp_setup(void)
+static const struct {
+ u32 base;
+ u32 reset_reg;
+ u32 clock_reg;
+ u32 bit;
+} uarts[] = {
+ {
+ TEGRA_UARTA_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 6,
+ },
+ {
+ TEGRA_UARTB_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 7,
+ },
+ {
+ TEGRA_UARTC_BASE,
+ TEGRA_CLK_RESET_BASE + 0x08,
+ TEGRA_CLK_RESET_BASE + 0x14,
+ 23,
+ },
+ {
+ TEGRA_UARTD_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 1,
+ },
+ {
+ TEGRA_UARTE_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 2,
+ },
+};
+
+static inline bool uart_clocked(int i)
+{
+ if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+ return false;
+
+ if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ return false;
+
+ return true;
+}
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+int auto_odmdata(void)
+{
+ volatile u32 *pmc = (volatile u32 *)TEGRA_PMC_BASE;
+ u32 odmdata = pmc[0xa0 / 4];
+
+ /*
+ * Bits 19:18 are the console type: 0=default, 1=none, 2==DCC, 3==UART
+ * Some boards apparently swap the last two values, but we don't have
+ * any way of catering for that here, so we just accept either. If this
+ * doesn't make sense for your board, just don't enable this feature.
+ *
+ * Bits 17:15 indicate the UART to use, 0/1/2/3/4 are UART A/B/C/D/E.
+ */
+
+ switch ((odmdata >> 18) & 3) {
+ case 2:
+ case 3:
+ break;
+ default:
+ return -1;
+ }
+
+ return (odmdata >> 15) & 7;
+}
+#endif
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH
+int auto_scratch(void)
{
- static const struct {
- u32 base;
- u32 reset_reg;
- u32 clock_reg;
- u32 bit;
- } uarts[] = {
- {
- TEGRA_UARTA_BASE,
- TEGRA_CLK_RESET_BASE + 0x04,
- TEGRA_CLK_RESET_BASE + 0x10,
- 6,
- },
- {
- TEGRA_UARTB_BASE,
- TEGRA_CLK_RESET_BASE + 0x04,
- TEGRA_CLK_RESET_BASE + 0x10,
- 7,
- },
- {
- TEGRA_UARTC_BASE,
- TEGRA_CLK_RESET_BASE + 0x08,
- TEGRA_CLK_RESET_BASE + 0x14,
- 23,
- },
- {
- TEGRA_UARTD_BASE,
- TEGRA_CLK_RESET_BASE + 0x0c,
- TEGRA_CLK_RESET_BASE + 0x18,
- 1,
- },
- {
- TEGRA_UARTE_BASE,
- TEGRA_CLK_RESET_BASE + 0x0c,
- TEGRA_CLK_RESET_BASE + 0x18,
- 2,
- },
- };
int i;
- volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
- u32 chip, div;
/*
* Look for the first UART that:
@@ -125,20 +159,60 @@ static inline void arch_decomp_setup(void)
* back to what's specified in TEGRA_DEBUG_UART_BASE.
*/
for (i = 0; i < ARRAY_SIZE(uarts); i++) {
- if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
- continue;
-
- if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ if (!uart_clocked(i))
continue;
uart = (volatile u8 *)uarts[i].base;
if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
continue;
- break;
+ return i;
}
- if (i == ARRAY_SIZE(uarts))
- uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+
+ return -1;
+}
+#endif
+
+/*
+ * Setup before decompression. This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
+static inline void arch_decomp_setup(void)
+{
+ int uart_id, auto_uart_id;
+ volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+ u32 chip, div;
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA)
+ uart_id = 0;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
+ uart_id = 1;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
+ uart_id = 2;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
+ uart_id = 3;
+#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
+ uart_id = 4;
+#else
+ uart_id = -1;
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+ auto_uart_id = auto_odmdata();
+#elif defined(CONFIG_TEGRA_DEBUG_UART_AUTO_SCRATCH)
+ auto_uart_id = auto_scratch();
+#else
+ auto_uart_id = -1;
+#endif
+ if (auto_uart_id != -1)
+ uart_id = auto_uart_id;
+
+ if (uart_id < 0 || uart_id >= ARRAY_SIZE(uarts) ||
+ !uart_clocked(uart_id))
+ uart = NULL;
+ else
+ uart = (volatile u8 *)uarts[uart_id].base;
+
save_uart_address();
if (uart == NULL)
return;