summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/board-mackerel.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-shmobile/board-mackerel.c')
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c86
1 files changed, 48 insertions, 38 deletions
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 150122a..c129542 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -41,6 +41,8 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/pm_clock.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <linux/sh_intc.h>
#include <linux/tca6416_keypad.h>
@@ -203,31 +205,32 @@
* amixer set "HPOUTR Mixer DACH" on
*/
-/*
- * FIXME !!
- *
- * gpio_no_direction
- * gpio_pull_down
- * are quick_hack.
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static void __init gpio_no_direction(u32 addr)
+/* Fixed 3.3V and 1.8V regulators to be used by multiple devices */
+static struct regulator_consumer_supply fixed1v8_power_consumers[] =
{
- __raw_writeb(0x00, addr);
-}
+ /*
+ * J22 on mackerel switches mmcif.0 and sdhi.1 between 1.8V and 3.3V
+ * Since we cannot support both voltages, we support the default 1.8V
+ */
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
+};
-static void __init gpio_pull_down(u32 addr)
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xA0;
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.2"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.2"),
+};
- __raw_writeb(data, addr);
-}
+/* Dummy supplies, where voltage doesn't matter */
+static struct regulator_consumer_supply dummy_supplies[] = {
+ REGULATOR_SUPPLY("vddvario", "smsc911x"),
+ REGULATOR_SUPPLY("vdd33a", "smsc911x"),
+};
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
@@ -692,6 +695,7 @@ static struct platform_device usbhs0_device = {
* - J30 "open"
* - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
* - add .get_vbus = usbhs_get_vbus in usbhs1_private
+ * - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
*/
#define IRQ8 evt2irq(0x0300)
#define USB_PHY_MODE (1 << 4)
@@ -1322,8 +1326,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
- &usbhs1_device,
&usbhs0_device,
+ &usbhs1_device,
&leds_device,
&fsi_device,
&fsi_ak4643_device,
@@ -1409,6 +1413,12 @@ static void __init mackerel_init(void)
u32 srcr4;
struct clk *clk;
+ regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
+ ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
+ regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_fixed(2, dummy_supplies, ARRAY_SIZE(dummy_supplies));
+
/* External clock source */
clk_set_rate(&sh7372_dv_clki_clk, 27000000);
@@ -1458,11 +1468,11 @@ static void __init mackerel_init(void)
/* USBHS0 */
gpio_request(GPIO_FN_VBUS0_0, NULL);
- gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+ gpio_request_pulldown(GPIO_PORT168CR); /* VBUS0_0 pull down */
/* USBHS1 */
gpio_request(GPIO_FN_VBUS0_1, NULL);
- gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+ gpio_request_pulldown(GPIO_PORT167CR); /* VBUS0_1 pull down */
gpio_request(GPIO_FN_IDIN_1_113, NULL);
/* enable FSI2 port A (ak4643) */
@@ -1475,8 +1485,8 @@ static void __init mackerel_init(void)
gpio_request(GPIO_PORT9, NULL);
gpio_request(GPIO_PORT10, NULL);
- gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */
- gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+ gpio_direction_none(GPIO_PORT9CR); /* FSIAOBT needs no direction */
+ gpio_direction_none(GPIO_PORT10CR); /* FSIAOLR needs no direction */
intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
@@ -1614,20 +1624,20 @@ static void __init mackerel_init(void)
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
- sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
- sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
- sh7372_add_device_to_domain(&sh7372_a4lc, &meram_device);
- sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs0_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &usbhs1_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &nand_flash_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sh_mmcif_device);
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &lcdc_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &hdmi_lcdc_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4lc, &meram_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4mp, &fsi_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs0_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &usbhs1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &nand_flash_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sh_mmcif_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi0_device);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi1_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi1_device);
#endif
- sh7372_add_device_to_domain(&sh7372_a3sp, &sdhi2_device);
- sh7372_add_device_to_domain(&sh7372_a4r, &ceu_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a3sp, &sdhi2_device);
+ rmobile_add_device_to_domain(&sh7372_pd_a4r, &ceu_device);
hdmi_init_pm_clock();
sh7372_pm_init();