summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile/board-armadillo800eva.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-shmobile/board-armadillo800eva.c')
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c785
1 files changed, 785 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
new file mode 100644
index 0000000..9bd1355
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -0,0 +1,785 @@
+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/r8a7740.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * CON1 Camera Module
+ * CON2 Extension Bus
+ * CON3 HDMI Output
+ * CON4 Composite Video Output
+ * CON5 H-UDI JTAG
+ * CON6 ARM JTAG
+ * CON7 SD1
+ * CON8 SD2
+ * CON9 RTC BackUp
+ * CON10 Monaural Mic Input
+ * CON11 Stereo Headphone Output
+ * CON12 Audio Line Output(L)
+ * CON13 Audio Line Output(R)
+ * CON14 AWL13 Module
+ * CON15 Extension
+ * CON16 LCD1
+ * CON17 LCD2
+ * CON19 Power Input
+ * CON20 USB1
+ * CON21 USB2
+ * CON22 Serial
+ * CON23 LAN
+ * CON24 USB3
+ * LED1 Camera LED(Yellow)
+ * LED2 Power LED (Green)
+ * ED3-LED6 User LED(Yellow)
+ * LED7 LAN link LED(Green)
+ * LED8 LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ * SW1
+ *
+ * -12345678-+---------------+----------------------------
+ * 1 | boot | hermit
+ * 0 | boot | OS auto boot
+ * -12345678-+---------------+----------------------------
+ * 00 | boot device | eMMC
+ * 10 | boot device | SDHI0 (CON7)
+ * 01 | boot device | -
+ * 11 | boot device | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ * 0 | Extension Bus | D8-D15 disable, eMMC enable
+ * 1 | Extension Bus | D8-D15 enable, eMMC disable
+ * -12345678-+---------------+----------------------------
+ * 0 | SDHI1 | COM8 disable, COM14 enable
+ * 1 | SDHI1 | COM8 enable, COM14 disable
+ * -12345678-+---------------+----------------------------
+ * 0 | USB0 | COM20 enable, COM24 disable
+ * 1 | USB0 | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ * 00 | JTAG | SH-X2
+ * 10 | JTAG | ARM
+ * 01 | JTAG | -
+ * 11 | JTAG | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ * usbhsf_power_ctrl()
+ *
+ * CAUTION
+ *
+ * It uses autonomy mode for USB hotplug at this point
+ * (= usbhs_private.platform_callback.get_vbus is NULL),
+ * since we don't know what's happen on PM control
+ * on this workaround.
+ */
+#define USBCR1 0xe605810a
+#define USBH 0xC6700000
+#define USBH_USBCTR 0x10834
+
+struct usbhsf_private {
+ struct clk *phy;
+ struct clk *usb24;
+ struct clk *pci;
+ struct clk *func;
+ struct clk *host;
+ void __iomem *usbh_base;
+ struct renesas_usbhs_platform_info info;
+};
+
+#define usbhsf_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), \
+ struct usbhsf_private, info)
+
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static void usbhsf_power_ctrl(struct platform_device *pdev,
+ void __iomem *base, int enable)
+{
+ struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+ /*
+ * Work around for USB Function.
+ * It needs USB host clock, and settings
+ */
+ if (enable) {
+ /*
+ * enable all the related usb clocks
+ * for usb workaround
+ */
+ clk_enable(priv->usb24);
+ clk_enable(priv->pci);
+ clk_enable(priv->host);
+ clk_enable(priv->func);
+ clk_enable(priv->phy);
+
+ /*
+ * set USBCR1
+ *
+ * Port1 is driven by USB function,
+ * Port2 is driven by USB HOST
+ * One HOST (Port1 or Port2 is HOST)
+ * USB PLL input clock = 24MHz
+ */
+ __raw_writew(0xd750, USBCR1);
+ mdelay(1);
+
+ /*
+ * start USB Host
+ */
+ __raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
+ __raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
+ mdelay(10);
+
+ /*
+ * USB PHY Power ON
+ */
+ __raw_writew(0xd770, USBCR1);
+ __raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
+
+ } else {
+ __raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
+ __raw_writew(0xd7c0, USBCR1); /* GPIO */
+
+ clk_disable(priv->phy);
+ clk_disable(priv->func); /* usb work around */
+ clk_disable(priv->host); /* usb work around */
+ clk_disable(priv->pci); /* usb work around */
+ clk_disable(priv->usb24); /* usb work around */
+ }
+}
+
+static void usbhsf_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+ if (!IS_ERR(priv->phy))
+ clk_put(priv->phy);
+ if (!IS_ERR(priv->usb24))
+ clk_put(priv->usb24);
+ if (!IS_ERR(priv->pci))
+ clk_put(priv->pci);
+ if (!IS_ERR(priv->host))
+ clk_put(priv->host);
+ if (!IS_ERR(priv->func))
+ clk_put(priv->func);
+ if (priv->usbh_base)
+ iounmap(priv->usbh_base);
+
+ priv->phy = NULL;
+ priv->usb24 = NULL;
+ priv->pci = NULL;
+ priv->host = NULL;
+ priv->func = NULL;
+ priv->usbh_base = NULL;
+}
+
+static int usbhsf_hardware_init(struct platform_device *pdev)
+{
+ struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+ priv->phy = clk_get(&pdev->dev, "phy");
+ priv->usb24 = clk_get(&pdev->dev, "usb24");
+ priv->pci = clk_get(&pdev->dev, "pci");
+ priv->func = clk_get(&pdev->dev, "func");
+ priv->host = clk_get(&pdev->dev, "host");
+ priv->usbh_base = ioremap_nocache(USBH, 0x20000);
+
+ if (IS_ERR(priv->phy) ||
+ IS_ERR(priv->usb24) ||
+ IS_ERR(priv->pci) ||
+ IS_ERR(priv->host) ||
+ IS_ERR(priv->func) ||
+ !priv->usbh_base) {
+ dev_err(&pdev->dev, "USB clock setting failed\n");
+ usbhsf_hardware_exit(pdev);
+ return -EIO;
+ }
+
+ /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
+ clk_set_rate(priv->usb24,
+ clk_get_rate(clk_get_parent(priv->usb24)));
+
+ return 0;
+}
+
+static struct usbhsf_private usbhsf_private = {
+ .info = {
+ .platform_callback = {
+ .get_id = usbhsf_get_id,
+ .hardware_init = usbhsf_hardware_init,
+ .hardware_exit = usbhsf_hardware_exit,
+ .power_ctrl = usbhsf_power_ctrl,
+ },
+ .driver_param = {
+ .buswait_bwait = 5,
+ .detection_delay = 5,
+ },
+ }
+};
+
+static struct resource usbhsf_resources[] = {
+ {
+ .name = "USBHS",
+ .start = 0xe6890000,
+ .end = 0xe6890104 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = evt2irq(0x0A20),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhsf_device = {
+ .name = "renesas_usbhs",
+ .dev = {
+ .platform_data = &usbhsf_private.info,
+ },
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usbhsf_resources),
+ .resource = usbhsf_resources,
+};
+
+/* Ether */
+static struct sh_eth_plat_data sh_eth_platdata = {
+ .phy = 0x00, /* LAN8710A */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+ .register_type = SH_ETH_REG_GIGABIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth_resources[] = {
+ {
+ .start = 0xe9a00000,
+ .end = 0xe9a00800 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0xe9a01800,
+ .end = 0xe9a02000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = evt2irq(0x0500),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "sh-eth",
+ .id = -1,
+ .dev = {
+ .platform_data = &sh_eth_platdata,
+ },
+ .resource = sh_eth_resources,
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+};
+
+/* LCDC */
+static struct fb_videomode lcdc0_mode = {
+ .name = "AMPIER/AM-800480",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .hsync_len = 128,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .interface_type = RGB24,
+ .clock_divider = 5,
+ .flags = 0,
+ .lcd_modes = &lcdc0_mode,
+ .num_modes = 1,
+ .panel_cfg = {
+ .width = 111,
+ .height = 68,
+ },
+ },
+};
+
+static struct resource lcdc0_resources[] = {
+ [0] = {
+ .name = "LCD0",
+ .start = 0xfe940000,
+ .end = 0xfe943fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = intcs_evt2irq(0x580),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc0_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc0_resources),
+ .resource = lcdc0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &lcdc0_info,
+ .coherent_dma_mask = ~0,
+ },
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+ GPIO_KEY(KEY_POWER, GPIO_PORT99, "SW1"),
+ GPIO_KEY(KEY_BACK, GPIO_PORT100, "SW2"),
+ GPIO_KEY(KEY_MENU, GPIO_PORT97, "SW3"),
+ GPIO_KEY(KEY_HOME, GPIO_PORT98, "SW4"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+/* SDHI0 */
+/*
+ * FIXME
+ *
+ * It use polling mode here, since
+ * CD (= Card Detect) pin is not connected to SDHI0_CD.
+ * We can use IRQ31 as card detect irq,
+ * but it needs chattering removal operation
+ */
+#define IRQ31 evt2irq(0x33E0)
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
+ MMC_CAP_NEEDS_POLL,
+ .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+ {
+ .name = "SDHI0",
+ .start = 0xe6850000,
+ .end = 0xe6850100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
+ */
+ {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
+ .start = evt2irq(0x0E20),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
+ .start = evt2irq(0x0E40),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+ .tmio_ocr_mask = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xe6860000,
+ .end = 0xe6860100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = evt2irq(0x0E80),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = evt2irq(0x0EA0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = evt2irq(0x0EC0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE,
+};
+
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "MMCIF",
+ .start = 0xe6bd0000,
+ .end = 0xe6bd0100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC ERR */
+ .start = evt2irq(0x1AC0),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC NOR */
+ .start = evt2irq(0x1AE0),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = -1,
+ .dev = {
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("st1232-ts", 0x55),
+ .irq = evt2irq(0x0340),
+ },
+};
+
+/*
+ * board devices
+ */
+static struct platform_device *eva_devices[] __initdata = {
+ &lcdc0_device,
+ &gpio_keys_device,
+ &sh_eth_device,
+ &sdhi0_device,
+ &sh_mmcif_device,
+};
+
+static void __init eva_clock_init(void)
+{
+ struct clk *system = clk_get(NULL, "system_clk");
+ struct clk *xtal1 = clk_get(NULL, "extal1");
+ struct clk *usb24s = clk_get(NULL, "usb24s");
+
+ if (IS_ERR(system) ||
+ IS_ERR(xtal1) ||
+ IS_ERR(usb24s)) {
+ pr_err("armadillo800eva board clock init failed\n");
+ goto clock_error;
+ }
+
+ /* armadillo 800 eva extal1 is 24MHz */
+ clk_set_rate(xtal1, 24000000);
+
+ /* usb24s use extal1 (= system) clock (= 24MHz) */
+ clk_set_parent(usb24s, system);
+
+clock_error:
+ if (!IS_ERR(system))
+ clk_put(system);
+ if (!IS_ERR(xtal1))
+ clk_put(xtal1);
+ if (!IS_ERR(usb24s))
+ clk_put(usb24s);
+}
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+ eva_clock_init();
+
+ r8a7740_pinmux_init();
+
+ /* SCIFA1 */
+ gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+ gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+
+ /* LCDC0 */
+ gpio_request(GPIO_FN_LCDC0_SELECT, NULL);
+ gpio_request(GPIO_FN_LCD0_D0, NULL);
+ gpio_request(GPIO_FN_LCD0_D1, NULL);
+ gpio_request(GPIO_FN_LCD0_D2, NULL);
+ gpio_request(GPIO_FN_LCD0_D3, NULL);
+ gpio_request(GPIO_FN_LCD0_D4, NULL);
+ gpio_request(GPIO_FN_LCD0_D5, NULL);
+ gpio_request(GPIO_FN_LCD0_D6, NULL);
+ gpio_request(GPIO_FN_LCD0_D7, NULL);
+ gpio_request(GPIO_FN_LCD0_D8, NULL);
+ gpio_request(GPIO_FN_LCD0_D9, NULL);
+ gpio_request(GPIO_FN_LCD0_D10, NULL);
+ gpio_request(GPIO_FN_LCD0_D11, NULL);
+ gpio_request(GPIO_FN_LCD0_D12, NULL);
+ gpio_request(GPIO_FN_LCD0_D13, NULL);
+ gpio_request(GPIO_FN_LCD0_D14, NULL);
+ gpio_request(GPIO_FN_LCD0_D15, NULL);
+ gpio_request(GPIO_FN_LCD0_D16, NULL);
+ gpio_request(GPIO_FN_LCD0_D17, NULL);
+ gpio_request(GPIO_FN_LCD0_D18_PORT40, NULL);
+ gpio_request(GPIO_FN_LCD0_D19_PORT4, NULL);
+ gpio_request(GPIO_FN_LCD0_D20_PORT3, NULL);
+ gpio_request(GPIO_FN_LCD0_D21_PORT2, NULL);
+ gpio_request(GPIO_FN_LCD0_D22_PORT0, NULL);
+ gpio_request(GPIO_FN_LCD0_D23_PORT1, NULL);
+ gpio_request(GPIO_FN_LCD0_DCK, NULL);
+ gpio_request(GPIO_FN_LCD0_VSYN, NULL);
+ gpio_request(GPIO_FN_LCD0_HSYN, NULL);
+ gpio_request(GPIO_FN_LCD0_DISP, NULL);
+ gpio_request(GPIO_FN_LCD0_LCLK_PORT165, NULL);
+
+ gpio_request(GPIO_PORT61, NULL); /* LCDDON */
+ gpio_direction_output(GPIO_PORT61, 1);
+
+ gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
+ gpio_direction_output(GPIO_PORT202, 0);
+
+ /* Touchscreen */
+ gpio_request(GPIO_FN_IRQ10, NULL); /* TP_INT */
+ gpio_request(GPIO_PORT166, NULL); /* TP_RST_B */
+ gpio_direction_output(GPIO_PORT166, 1);
+
+ /* GETHER */
+ gpio_request(GPIO_FN_ET_CRS, NULL);
+ gpio_request(GPIO_FN_ET_MDC, NULL);
+ gpio_request(GPIO_FN_ET_MDIO, NULL);
+ gpio_request(GPIO_FN_ET_TX_ER, NULL);
+ gpio_request(GPIO_FN_ET_RX_ER, NULL);
+ gpio_request(GPIO_FN_ET_ERXD0, NULL);
+ gpio_request(GPIO_FN_ET_ERXD1, NULL);
+ gpio_request(GPIO_FN_ET_ERXD2, NULL);
+ gpio_request(GPIO_FN_ET_ERXD3, NULL);
+ gpio_request(GPIO_FN_ET_TX_CLK, NULL);
+ gpio_request(GPIO_FN_ET_TX_EN, NULL);
+ gpio_request(GPIO_FN_ET_ETXD0, NULL);
+ gpio_request(GPIO_FN_ET_ETXD1, NULL);
+ gpio_request(GPIO_FN_ET_ETXD2, NULL);
+ gpio_request(GPIO_FN_ET_ETXD3, NULL);
+ gpio_request(GPIO_FN_ET_PHY_INT, NULL);
+ gpio_request(GPIO_FN_ET_COL, NULL);
+ gpio_request(GPIO_FN_ET_RX_DV, NULL);
+ gpio_request(GPIO_FN_ET_RX_CLK, NULL);
+
+ gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+ gpio_direction_output(GPIO_PORT18, 1);
+
+ /* USB */
+ gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
+ gpio_direction_input(GPIO_PORT159);
+
+ if (gpio_get_value(GPIO_PORT159)) {
+ /* USB Host */
+ } else {
+ /* USB Func */
+ gpio_request(GPIO_FN_VBUS, NULL);
+ platform_device_register(&usbhsf_device);
+ }
+
+ /* SDHI0 */
+ gpio_request(GPIO_FN_SDHI0_CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0_CLK, NULL);
+ gpio_request(GPIO_FN_SDHI0_D0, NULL);
+ gpio_request(GPIO_FN_SDHI0_D1, NULL);
+ gpio_request(GPIO_FN_SDHI0_D2, NULL);
+ gpio_request(GPIO_FN_SDHI0_D3, NULL);
+ gpio_request(GPIO_FN_SDHI0_WP, NULL);
+
+ gpio_request(GPIO_PORT17, NULL); /* SDHI0_18/33_B */
+ gpio_request(GPIO_PORT74, NULL); /* SDHI0_PON */
+ gpio_request(GPIO_PORT75, NULL); /* SDSLOT1_PON */
+ gpio_direction_output(GPIO_PORT17, 0);
+ gpio_direction_output(GPIO_PORT74, 1);
+ gpio_direction_output(GPIO_PORT75, 1);
+
+ /* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
+
+ /*
+ * MMCIF
+ *
+ * Here doesn't care SW1.4 status,
+ * since CON2 is not mounted.
+ */
+ gpio_request(GPIO_FN_MMC1_CLK_PORT103, NULL);
+ gpio_request(GPIO_FN_MMC1_CMD_PORT104, NULL);
+ gpio_request(GPIO_FN_MMC1_D0_PORT149, NULL);
+ gpio_request(GPIO_FN_MMC1_D1_PORT148, NULL);
+ gpio_request(GPIO_FN_MMC1_D2_PORT147, NULL);
+ gpio_request(GPIO_FN_MMC1_D3_PORT146, NULL);
+ gpio_request(GPIO_FN_MMC1_D4_PORT145, NULL);
+ gpio_request(GPIO_FN_MMC1_D5_PORT144, NULL);
+ gpio_request(GPIO_FN_MMC1_D6_PORT143, NULL);
+ gpio_request(GPIO_FN_MMC1_D7_PORT142, NULL);
+
+ /*
+ * CAUTION
+ *
+ * DBGMD/LCDC0/FSIA MUX
+ * DBGMD_SELECT_B should be set after setting PFC Function.
+ */
+ gpio_request(GPIO_PORT176, NULL);
+ gpio_direction_output(GPIO_PORT176, 1);
+
+ /*
+ * We can switch CON8/CON14 by SW1.5,
+ * but it needs after DBGMD_SELECT_B
+ */
+ gpio_request(GPIO_PORT6, NULL);
+ gpio_direction_input(GPIO_PORT6);
+ if (gpio_get_value(GPIO_PORT6)) {
+ /* CON14 enable */
+ } else {
+ /* CON8 (SDHI1) enable */
+ gpio_request(GPIO_FN_SDHI1_CLK, NULL);
+ gpio_request(GPIO_FN_SDHI1_CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1_D0, NULL);
+ gpio_request(GPIO_FN_SDHI1_D1, NULL);
+ gpio_request(GPIO_FN_SDHI1_D2, NULL);
+ gpio_request(GPIO_FN_SDHI1_D3, NULL);
+ gpio_request(GPIO_FN_SDHI1_CD, NULL);
+ gpio_request(GPIO_FN_SDHI1_WP, NULL);
+
+ gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
+ gpio_direction_output(GPIO_PORT16, 1);
+
+ platform_device_register(&sdhi1_device);
+ }
+
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Early BRESP enable, Shared attribute override enable, 32K*8way */
+ l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+
+ r8a7740_add_standard_devices();
+
+ platform_add_devices(eva_devices,
+ ARRAY_SIZE(eva_devices));
+}
+
+static void __init eva_earlytimer_init(void)
+{
+ r8a7740_clock_init(MD_CK0 | MD_CK2);
+ shmobile_earlytimer_init();
+}
+
+static void __init eva_add_early_devices(void)
+{
+ r8a7740_add_early_devices();
+
+ /* override timer setup with board-specific code */
+ shmobile_timer.init = eva_earlytimer_init;
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+ "renesas,armadillo800eva",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
+ .map_io = r8a7740_map_io,
+ .init_early = eva_add_early_devices,
+ .init_irq = r8a7740_init_irq,
+ .handle_irq = shmobile_handle_irq_intc,
+ .init_machine = eva_init,
+ .init_late = shmobile_init_late,
+ .timer = &shmobile_timer,
+ .dt_compat = eva_boards_compat_dt,
+MACHINE_END