summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c24xx/mach-osiris.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c24xx/mach-osiris.c')
-rw-r--r--arch/arm/mach-s3c24xx/mach-osiris.c440
1 files changed, 440 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
new file mode 100644
index 0000000..c5daeb6
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -0,0 +1,440 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris.c
+ *
+ * Copyright (c) 2005-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#include "common.h"
+
+/* onboard perihperal map */
+
+static struct map_desc osiris_iodesc[] __initdata = {
+ /* ISA IO areas (may be over-written later) */
+
+ {
+ .virtual = (u32)S3C24XX_VA_ISA_BYTE,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)S3C24XX_VA_ISA_WORD,
+ .pfn = __phys_to_pfn(S3C2410_CS5),
+ .length = SZ_16M,
+ .type = MT_DEVICE,
+ },
+
+ /* CPLD control registers */
+
+ {
+ .virtual = (u32)OSIRIS_VA_CTRL0,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL1,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_CTRL2,
+ .pfn = __phys_to_pfn(OSIRIS_PA_CTRL2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (u32)OSIRIS_VA_IDREG,
+ .pfn = __phys_to_pfn(OSIRIS_PA_IDREG),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
+ }
+};
+
+/* NAND Flash on Osiris board */
+
+static int external_map[] = { 2 };
+static int chip0_map[] = { 0 };
+static int chip1_map[] = { 1 };
+
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_16K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_16K,
+ .offset = SZ_16K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
+ [0] = {
+ .name = "Boot Agent",
+ .size = SZ_128K,
+ .offset = 0,
+ },
+ [1] = {
+ .name = "/boot",
+ .size = SZ_4M - SZ_128K,
+ .offset = SZ_128K,
+ },
+ [2] = {
+ .name = "user1",
+ .offset = SZ_4M,
+ .size = SZ_32M - SZ_4M,
+ },
+ [3] = {
+ .name = "user2",
+ .offset = SZ_32M,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+/* the Osiris has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
+ [1] = {
+ .name = "External",
+ .nr_chips = 1,
+ .nr_map = external_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [0] = {
+ .name = "chip0",
+ .nr_chips = 1,
+ .nr_map = chip0_map,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+ [2] = {
+ .name = "chip1",
+ .nr_chips = 1,
+ .nr_map = chip1_map,
+ .options = NAND_SCAN_SILENT_NODEV,
+ .nr_partitions = ARRAY_SIZE(osiris_default_nand_part),
+ .partitions = osiris_default_nand_part,
+ },
+};
+
+static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+ unsigned int tmp;
+
+ slot = set->nr_map[slot] & 3;
+
+ pr_debug("osiris_nand: selecting slot %d (set %p,%p)\n",
+ slot, set, set->nr_map);
+
+ tmp = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp &= ~OSIRIS_CTRL0_NANDSEL;
+ tmp |= slot;
+
+ pr_debug("osiris_nand: ctrl0 now %02x\n", tmp);
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+}
+
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
+ .tacls = 25,
+ .twrph0 = 60,
+ .twrph1 = 60,
+ .nr_sets = ARRAY_SIZE(osiris_nand_sets),
+ .sets = osiris_nand_sets,
+ .select_chip = osiris_nand_select,
+};
+
+/* PCMCIA control and configuration */
+
+static struct resource osiris_pcmcia_resource[] = {
+ [0] = {
+ .start = 0x0f000000,
+ .end = 0x0f100000,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x0c000000,
+ .end = 0x0c100000,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device osiris_pcmcia = {
+ .name = "osiris-pcmcia",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(osiris_pcmcia_resource),
+ .resource = osiris_pcmcia_resource,
+};
+
+/* Osiris power management device */
+
+#ifdef CONFIG_PM
+static unsigned char pm_osiris_ctrl0;
+
+static int osiris_pm_suspend(void)
+{
+ unsigned int tmp;
+
+ pm_osiris_ctrl0 = __raw_readb(OSIRIS_VA_CTRL0);
+ tmp = pm_osiris_ctrl0 & ~OSIRIS_CTRL0_NANDSEL;
+
+ /* ensure correct NAND slot is selected on resume */
+ if ((pm_osiris_ctrl0 & OSIRIS_CTRL0_BOOT_INT) == 0)
+ tmp |= 2;
+
+ __raw_writeb(tmp, OSIRIS_VA_CTRL0);
+
+ /* ensure that an nRESET is not generated on resume. */
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+
+ return 0;
+}
+
+static void osiris_pm_resume(void)
+{
+ if (pm_osiris_ctrl0 & OSIRIS_CTRL0_FIX8)
+ __raw_writeb(OSIRIS_CTRL1_FIX8, OSIRIS_VA_CTRL1);
+
+ __raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
+
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+}
+
+#else
+#define osiris_pm_suspend NULL
+#define osiris_pm_resume NULL
+#endif
+
+static struct syscore_ops osiris_pm_syscore_ops = {
+ .suspend = osiris_pm_suspend,
+ .resume = osiris_pm_resume,
+};
+
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+ /* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+ .name = "osiris-dvs",
+ .id = -1,
+ .dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+ osiris_tps_device.dev.parent = &client->dev;
+ return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+ platform_device_unregister(&osiris_tps_device);
+ return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+ .base = -1, /* GPIO can go anywhere at the moment */
+ .setup = osiris_tps_setup,
+ .teardown = osiris_tps_remove,
+};
+
+/* I2C devices fitted. */
+
+static struct i2c_board_info osiris_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("tps65011", 0x48),
+ .irq = IRQ_EINT20,
+ .platform_data = &osiris_tps_board,
+ },
+};
+
+/* Standard Osiris devices */
+
+static struct platform_device *osiris_devices[] __initdata = {
+ &s3c_device_i2c0,
+ &s3c_device_wdt,
+ &s3c_device_nand,
+ &osiris_pcmcia,
+};
+
+static struct clk *osiris_clocks[] __initdata = {
+ &s3c24xx_dclk0,
+ &s3c24xx_dclk1,
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+ &s3c24xx_uclk,
+};
+
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+ .refresh = 7800, /* refresh period is 7.8usec */
+ .auto_io = 1,
+ .need_io = 1,
+};
+
+static void __init osiris_map_io(void)
+{
+ unsigned long flags;
+
+ /* initialise the clocks */
+
+ s3c24xx_dclk0.parent = &clk_upll;
+ s3c24xx_dclk0.rate = 12*1000*1000;
+
+ s3c24xx_dclk1.parent = &clk_upll;
+ s3c24xx_dclk1.rate = 24*1000*1000;
+
+ s3c24xx_clkout0.parent = &s3c24xx_dclk0;
+ s3c24xx_clkout1.parent = &s3c24xx_dclk1;
+
+ s3c24xx_uclk.parent = &s3c24xx_clkout1;
+
+ s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
+
+ s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
+ s3c24xx_init_clocks(0);
+ s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+
+ /* check for the newer revision boards with large page nand */
+
+ if ((__raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK) >= 4) {
+ printk(KERN_INFO "OSIRIS-B detected (revision %d)\n",
+ __raw_readb(OSIRIS_VA_IDREG) & OSIRIS_ID_REVMASK);
+ osiris_nand_sets[0].partitions = osiris_default_nand_part_large;
+ osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
+ } else {
+ /* write-protect line to the NAND */
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
+ }
+
+ /* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
+
+ local_irq_save(flags);
+ __raw_writel(__raw_readl(S3C2410_BWSCON) | S3C2410_BWSCON_ST1 | S3C2410_BWSCON_ST2 | S3C2410_BWSCON_ST3 | S3C2410_BWSCON_ST4 | S3C2410_BWSCON_ST5, S3C2410_BWSCON);
+ local_irq_restore(flags);
+}
+
+static void __init osiris_init(void)
+{
+ register_syscore_ops(&osiris_pm_syscore_ops);
+
+ s3c_i2c0_set_platdata(NULL);
+ s3c_nand_set_platdata(&osiris_nand_info);
+
+ s3c_cpufreq_setboard(&osiris_cpufreq);
+
+ i2c_register_board_info(0, osiris_i2c_devs,
+ ARRAY_SIZE(osiris_i2c_devs));
+
+ platform_add_devices(osiris_devices, ARRAY_SIZE(osiris_devices));
+};
+
+MACHINE_START(OSIRIS, "Simtec-OSIRIS")
+ /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+ .atag_offset = 0x100,
+ .map_io = osiris_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = osiris_init,
+ .timer = &s3c24xx_timer,
+ .restart = s3c244x_restart,
+MACHINE_END