summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2440/s3c244x.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2440/s3c244x.c')
-rw-r--r--arch/arm/mach-s3c2440/s3c244x.c210
1 files changed, 0 insertions, 210 deletions
diff --git a/arch/arm/mach-s3c2440/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
deleted file mode 100644
index d15852f..0000000
--- a/arch/arm/mach-s3c2440/s3c244x.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.c
- *
- * Copyright (c) 2004-2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 and S3C2442 Mobile CPU support (not S3C2443)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <plat/cpu-freq.h>
-
-#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/s3c2410.h>
-#include <plat/s3c244x.h>
-#include <plat/clock.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
-#include <plat/nand-core.h>
-#include <plat/watchdog-reset.h>
-
-static struct map_desc s3c244x_iodesc[] __initdata = {
- IODESC_ENT(CLKPWR),
- IODESC_ENT(TIMER),
- IODESC_ENT(WATCHDOG),
-};
-
-/* uart initialisation */
-
-void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
-}
-
-void __init s3c244x_map_io(void)
-{
- /* register our io-tables */
-
- iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc));
-
- /* rename any peripherals used differing from the s3c2410 */
-
- s3c_device_sdi.name = "s3c2440-sdi";
- s3c_device_i2c0.name = "s3c2440-i2c";
- s3c_nand_setname("s3c2440-nand");
- s3c_device_ts.name = "s3c2440-ts";
- s3c_device_usbgadget.name = "s3c2440-usbgadget";
-}
-
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long clkdiv;
- unsigned long camdiv;
- unsigned long xtal;
- unsigned long hclk, fclk, pclk;
- int hdiv = 1;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- camdiv = __raw_readl(S3C2440_CAMDIVN);
-
- /* work out clock scalings */
-
- switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
- case S3C2440_CLKDIVN_HDIVN_1:
- hdiv = 1;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 2;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_4_8:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
- break;
-
- case S3C2440_CLKDIVN_HDIVN_3_6:
- hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
- break;
- }
-
- hclk = fclk / hdiv;
- pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brief summary of clocks, etc */
-
- printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
- /* initialise the clocks here, to allow other things like the
- * console to use them, and to add new ones after the initialisation
- */
-
- s3c24xx_register_baseclocks(xtal);
- s3c244x_setup_clocks();
- s3c2410_baseclk_add();
-}
-
-/* Since the S3C2442 and S3C2440 share items, put both subsystems here */
-
-struct bus_type s3c2440_subsys = {
- .name = "s3c2440-core",
- .dev_name = "s3c2440-core",
-};
-
-struct bus_type s3c2442_subsys = {
- .name = "s3c2442-core",
- .dev_name = "s3c2442-core",
-};
-
-/* need to register the subsystem before we actually register the device, and
- * we also need to ensure that it has been initialised before any of the
- * drivers even try to use it (even if not on an s3c2440 based system)
- * as a driver which may support both 2410 and 2440 may try and use it.
-*/
-
-static int __init s3c2440_core_init(void)
-{
- return subsys_system_register(&s3c2440_subsys, NULL);
-}
-
-core_initcall(s3c2440_core_init);
-
-static int __init s3c2442_core_init(void)
-{
- return subsys_system_register(&s3c2442_subsys, NULL);
-}
-
-core_initcall(s3c2442_core_init);
-
-
-#ifdef CONFIG_PM
-static struct sleep_save s3c244x_sleep[] = {
- SAVE_ITEM(S3C2440_DSC0),
- SAVE_ITEM(S3C2440_DSC1),
- SAVE_ITEM(S3C2440_GPJDAT),
- SAVE_ITEM(S3C2440_GPJCON),
- SAVE_ITEM(S3C2440_GPJUP)
-};
-
-static int s3c244x_suspend(void)
-{
- s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
- return 0;
-}
-
-static void s3c244x_resume(void)
-{
- s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep));
-}
-#else
-#define s3c244x_suspend NULL
-#define s3c244x_resume NULL
-#endif
-
-struct syscore_ops s3c244x_pm_syscore_ops = {
- .suspend = s3c244x_suspend,
- .resume = s3c244x_resume,
-};
-
-void s3c244x_restart(char mode, const char *cmd)
-{
- if (mode == 's')
- soft_restart(0);
-
- arch_wdt_reset();
-
- /* we'll take a jump through zero as a poor second */
- soft_restart(0);
-}