summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/gpmc-smsc911x.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/gpmc-smsc911x.c')
-rw-r--r--arch/arm/mach-omap2/gpmc-smsc911x.c62
1 files changed, 2 insertions, 60 deletions
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c
index bbb870c..b6c77be 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -19,15 +19,11 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
#include <plat/board.h>
#include <plat/gpmc.h>
#include <plat/gpmc-smsc911x.h>
-static struct omap_smsc911x_platform_data *gpmc_cfg;
-
static struct resource gpmc_smsc911x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
@@ -41,51 +37,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
- .flags = SMSC911X_USE_16BIT,
-};
-
-static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-};
-
-/* Generic regulator definition to satisfy smsc911x */
-static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
- .constraints = {
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(gpmc_smsc911x_supply),
- .consumer_supplies = gpmc_smsc911x_supply,
-};
-
-static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
- .supply_name = "gpmc_smsc911x",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .startup_delay = 0,
- .enable_high = 0,
- .enabled_at_boot = 1,
- .init_data = &gpmc_smsc911x_reg_init_data,
-};
-
-/*
- * Platform device id of 42 is a temporary fix to avoid conflicts
- * with other reg-fixed-voltage devices. The real fix should
- * involve the driver core providing a way of dynamically
- * assigning a unique id on registration for platform devices
- * in the same name space.
- */
-static struct platform_device gpmc_smsc911x_regulator = {
- .name = "reg-fixed-voltage",
- .id = 42,
- .dev = {
- .platform_data = &gpmc_smsc911x_fixed_reg_data,
- },
};
/*
@@ -93,20 +44,12 @@ static struct platform_device gpmc_smsc911x_regulator = {
* assume that pin multiplexing is done in the board-*.c file,
* or in the bootloader.
*/
-void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
+void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
{
struct platform_device *pdev;
unsigned long cs_mem_base;
int ret;
- gpmc_cfg = board_data;
-
- ret = platform_device_register(&gpmc_smsc911x_regulator);
- if (ret < 0) {
- pr_err("Unable to register smsc911x regulators: %d\n", ret);
- return;
- }
-
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
pr_err("Failed to request GPMC mem region\n");
return;
@@ -136,8 +79,7 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
gpio_set_value(gpmc_cfg->gpio_reset, 1);
}
- if (gpmc_cfg->flags)
- gpmc_smsc911x_config.flags = gpmc_cfg->flags;
+ gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),