summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/board-omap4panda.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/board-omap4panda.c')
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c120
1 files changed, 30 insertions, 90 deletions
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1b782ba..982fb26 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -28,6 +28,7 @@
#include <linux/mfd/twl6040.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
+#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
@@ -42,7 +43,7 @@
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
-#include <video/omap-panel-dvi.h>
+#include <video/omap-panel-tfp410.h>
#include "hsmmc.h"
#include "control.h"
@@ -58,12 +59,21 @@
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
+static struct ti_st_plat_data wilink_platform_data = {
+ .nshutdown_gpio = 46,
+ .dev_name = "/dev/ttyO1",
+ .flow_cntrl = 1,
+ .baud_rate = 3000000,
+ .chip_enable = NULL,
+ .suspend = NULL,
+ .resume = NULL,
+};
+
static struct platform_device wl1271_device = {
.name = "kim",
.id = -1,
.dev = {
- .platform_data = &wl1271_gpios,
+ .platform_data = &wilink_platform_data,
},
};
@@ -117,6 +127,11 @@ static struct platform_device panda_abe_audio = {
},
};
+static struct platform_device panda_hdmi_audio_codec = {
+ .name = "hdmi-audio-codec",
+ .id = -1,
+};
+
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
@@ -126,6 +141,7 @@ static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
&panda_abe_audio,
+ &panda_hdmi_audio_codec,
&btwilink_device,
};
@@ -231,60 +247,11 @@ static struct platform_device omap_vwlan_device = {
},
};
-struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
+static struct wl12xx_platform_data omap_panda_wlan_data __initdata = {
/* PANDA ref clock is 38.4 MHz */
.board_ref_clock = 2,
};
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int irq = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- if (!pdata) {
- dev_err(dev, "%s: NULL platform data\n", __func__);
- return -EINVAL;
- }
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- irq = twl6030_mmc_card_detect_config();
- if (irq < 0) {
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, irq);
- return irq;
- }
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return 0;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
- return;
- }
- pdata = dev->platform_data;
-
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
-
- return 0;
-}
-
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
@@ -323,7 +290,9 @@ static int __init omap4_panda_i2c_init(void)
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
- TWL_COMMON_REGULATOR_CLK32KG);
+ TWL_COMMON_REGULATOR_CLK32KG |
+ TWL_COMMON_REGULATOR_V1V8 |
+ TWL_COMMON_REGULATOR_V2V1);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
@@ -420,47 +389,22 @@ static struct omap_board_mux board_mux[] __initdata = {
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
-static int omap4_panda_enable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 0);
-}
-
/* Using generic display panel */
-static struct panel_dvi_platform_data omap4_dvi_panel = {
- .platform_enable = omap4_panda_enable_dvi,
- .platform_disable = omap4_panda_disable_dvi,
- .i2c_bus_num = 3,
+static struct tfp410_platform_data omap4_dvi_panel = {
+ .i2c_bus_num = 3,
+ .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
-struct omap_dss_device omap4_panda_dvi_device = {
+static struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "dvi",
+ .driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
-int __init omap4_panda_dvi_init(void)
-{
- int r;
-
- /* Requesting TFP410 DVI GPIO and disabling it, at bootup */
- r = gpio_request_one(omap4_panda_dvi_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "DVI PD");
- if (r)
- pr_err("Failed to get DVI powerdown GPIO\n");
-
- return r;
-}
-
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -509,13 +453,8 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
.default_device = &omap4_panda_dvi_device,
};
-void __init omap4_panda_display_init(void)
+static void __init omap4_panda_display_init(void)
{
- int r;
-
- r = omap4_panda_dvi_init();
- if (r)
- pr_err("error initializing panda DVI\n");
omap_display_init(&omap4_panda_dss_data);
@@ -582,6 +521,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.init_irq = gic_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
+ .init_late = omap4430_init_late,
.timer = &omap4_timer,
.restart = omap_prcm_restart,
MACHINE_END