summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/gpio.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/gpio.c')
-rw-r--r--arch/arm/mach-at91/gpio.c625
1 files changed, 541 insertions, 84 deletions
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 74d6783..325837a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -11,6 +11,7 @@
#include <linux/clk.h>
#include <linux/errno.h>
+#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -20,6 +21,10 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
#include <mach/hardware.h>
#include <mach/at91_pio.h>
@@ -29,9 +34,12 @@
struct at91_gpio_chip {
struct gpio_chip chip;
struct at91_gpio_chip *next; /* Bank sharing same clock */
- int id; /* ID of register bank */
- void __iomem *regbase; /* Base of register bank */
+ int pioc_hwirq; /* PIO bank interrupt identifier on AIC */
+ int pioc_virq; /* PIO bank Linux virtual interrupt */
+ int pioc_idx; /* PIO bank index */
+ void __iomem *regbase; /* PIO bank virtual address */
struct clk *clock; /* associated clock */
+ struct irq_domain *domain; /* associated irq domain */
};
#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
@@ -43,8 +51,9 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
unsigned offset, int val);
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset);
+static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
-#define AT91_GPIO_CHIP(name, base_gpio, nr_gpio) \
+#define AT91_GPIO_CHIP(name, nr_gpio) \
{ \
.chip = { \
.label = name, \
@@ -53,20 +62,28 @@ static int at91_gpiolib_direction_input(struct gpio_chip *chip,
.get = at91_gpiolib_get, \
.set = at91_gpiolib_set, \
.dbg_show = at91_gpiolib_dbg_show, \
- .base = base_gpio, \
+ .to_irq = at91_gpiolib_to_irq, \
.ngpio = nr_gpio, \
}, \
}
static struct at91_gpio_chip gpio_chip[] = {
- AT91_GPIO_CHIP("pioA", 0x00, 32),
- AT91_GPIO_CHIP("pioB", 0x20, 32),
- AT91_GPIO_CHIP("pioC", 0x40, 32),
- AT91_GPIO_CHIP("pioD", 0x60, 32),
- AT91_GPIO_CHIP("pioE", 0x80, 32),
+ AT91_GPIO_CHIP("pioA", 32),
+ AT91_GPIO_CHIP("pioB", 32),
+ AT91_GPIO_CHIP("pioC", 32),
+ AT91_GPIO_CHIP("pioD", 32),
+ AT91_GPIO_CHIP("pioE", 32),
};
static int gpio_banks;
+static unsigned long at91_gpio_caps;
+
+/* All PIO controllers support PIO3 features */
+#define AT91_GPIO_CAP_PIO3 (1 << 0)
+
+#define has_pio3() (at91_gpio_caps & AT91_GPIO_CAP_PIO3)
+
+/*--------------------------------------------------------------------------*/
static inline void __iomem *pin_to_controller(unsigned pin)
{
@@ -83,6 +100,25 @@ static inline unsigned pin_to_mask(unsigned pin)
}
+static char peripheral_function(void __iomem *pio, unsigned mask)
+{
+ char ret = 'X';
+ u8 select;
+
+ if (pio) {
+ if (has_pio3()) {
+ select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
+ select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
+ ret = 'A' + select;
+ } else {
+ ret = __raw_readl(pio + PIO_ABSR) & mask ?
+ 'B' : 'A';
+ }
+ }
+
+ return ret;
+}
+
/*--------------------------------------------------------------------------*/
/* Not all hardware capabilities are exposed through these calls; they
@@ -130,7 +166,14 @@ int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_ASR);
+ if (has_pio3()) {
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask,
+ pio + PIO_ABCDSR1);
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
+ pio + PIO_ABCDSR2);
+ } else {
+ __raw_writel(mask, pio + PIO_ASR);
+ }
__raw_writel(mask, pio + PIO_PDR);
return 0;
}
@@ -150,7 +193,14 @@ int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_BSR);
+ if (has_pio3()) {
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask,
+ pio + PIO_ABCDSR1);
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
+ pio + PIO_ABCDSR2);
+ } else {
+ __raw_writel(mask, pio + PIO_BSR);
+ }
__raw_writel(mask, pio + PIO_PDR);
return 0;
}
@@ -158,8 +208,50 @@ EXPORT_SYMBOL(at91_set_B_periph);
/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
- * configure it for an input.
+ * mux the pin to the "C" internal peripheral role.
+ */
+int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio || !has_pio3())
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+ __raw_writel(mask, pio + PIO_PDR);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_C_periph);
+
+
+/*
+ * mux the pin to the "D" internal peripheral role.
+ */
+int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio || !has_pio3())
+ return -EINVAL;
+
+ __raw_writel(mask, pio + PIO_IDR);
+ __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
+ __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
+ __raw_writel(mask, pio + PIO_PDR);
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_D_periph);
+
+
+/*
+ * mux the pin to the gpio controller (instead of "A", "B", "C"
+ * or "D" peripheral), and configure it for an input.
*/
int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
{
@@ -179,8 +271,8 @@ EXPORT_SYMBOL(at91_set_gpio_input);
/*
- * mux the pin to the gpio controller (instead of "A" or "B" peripheral),
- * and configure it for an output.
+ * mux the pin to the gpio controller (instead of "A", "B", "C"
+ * or "D" peripheral), and configure it for an output.
*/
int __init_or_module at91_set_gpio_output(unsigned pin, int value)
{
@@ -210,12 +302,37 @@ int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
if (!pio)
return -EINVAL;
+
+ if (has_pio3() && is_on)
+ __raw_writel(mask, pio + PIO_IFSCDR);
__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
return 0;
}
EXPORT_SYMBOL(at91_set_deglitch);
/*
+ * enable/disable the debounce filter;
+ */
+int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio || !has_pio3())
+ return -EINVAL;
+
+ if (is_on) {
+ __raw_writel(mask, pio + PIO_IFSCER);
+ __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
+ __raw_writel(mask, pio + PIO_IFER);
+ } else {
+ __raw_writel(mask, pio + PIO_IFDR);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_debounce);
+
+/*
* enable/disable the multi-driver; This is only valid for output and
* allows the output pin to run as an open collector output.
*/
@@ -233,6 +350,41 @@ int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
EXPORT_SYMBOL(at91_set_multi_drive);
/*
+ * enable/disable the pull-down.
+ * If pull-up already enabled while calling the function, we disable it.
+ */
+int __init_or_module at91_set_pulldown(unsigned pin, int is_on)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio || !has_pio3())
+ return -EINVAL;
+
+ /* Disable pull-up anyway */
+ __raw_writel(mask, pio + PIO_PUDR);
+ __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
+ return 0;
+}
+EXPORT_SYMBOL(at91_set_pulldown);
+
+/*
+ * disable Schmitt trigger
+ */
+int __init_or_module at91_disable_schmitt_trig(unsigned pin)
+{
+ void __iomem *pio = pin_to_controller(pin);
+ unsigned mask = pin_to_mask(pin);
+
+ if (!pio || !has_pio3())
+ return -EINVAL;
+
+ __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
+ return 0;
+}
+EXPORT_SYMBOL(at91_disable_schmitt_trig);
+
+/*
* assuming the pin is muxed as a gpio output, set its value.
*/
int at91_set_gpio_value(unsigned pin, int value)
@@ -273,9 +425,9 @@ static u32 backups[MAX_GPIO_BANKS];
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
- unsigned pin = irq_to_gpio(d->irq);
- unsigned mask = pin_to_mask(pin);
- unsigned bank = pin / 32;
+ struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+ unsigned mask = 1 << d->hwirq;
+ unsigned bank = at91_gpio->pioc_idx;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
@@ -285,7 +437,7 @@ static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
else
wakeups[bank] &= ~mask;
- irq_set_irq_wake(gpio_chip[bank].id, state);
+ irq_set_irq_wake(at91_gpio->pioc_virq, state);
return 0;
}
@@ -301,9 +453,10 @@ void at91_gpio_suspend(void)
__raw_writel(backups[i], pio + PIO_IDR);
__raw_writel(wakeups[i], pio + PIO_IER);
- if (!wakeups[i])
+ if (!wakeups[i]) {
+ clk_unprepare(gpio_chip[i].clock);
clk_disable(gpio_chip[i].clock);
- else {
+ } else {
#ifdef CONFIG_PM_DEBUG
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
#endif
@@ -318,8 +471,10 @@ void at91_gpio_resume(void)
for (i = 0; i < gpio_banks; i++) {
void __iomem *pio = gpio_chip[i].regbase;
- if (!wakeups[i])
- clk_enable(gpio_chip[i].clock);
+ if (!wakeups[i]) {
+ if (clk_prepare(gpio_chip[i].clock) == 0)
+ clk_enable(gpio_chip[i].clock);
+ }
__raw_writel(wakeups[i], pio + PIO_IDR);
__raw_writel(backups[i], pio + PIO_IER);
@@ -335,7 +490,10 @@ void at91_gpio_resume(void)
* To use any AT91_PIN_* as an externally triggered IRQ, first call
* at91_set_gpio_input() then maybe enable its glitch filter.
* Then just request_irq() with the pin ID; it works like any ARM IRQ
- * handler, though it always triggers on rising and falling edges.
+ * handler.
+ * First implementation always triggers on rising and falling edges
+ * whereas the newer PIO3 can be additionally configured to trigger on
+ * level, edge with any polarity.
*
* Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
* configuring them with at91_set_a_periph() or at91_set_b_periph().
@@ -344,9 +502,9 @@ void at91_gpio_resume(void)
static void gpio_irq_mask(struct irq_data *d)
{
- unsigned pin = irq_to_gpio(d->irq);
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
+ struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << d->hwirq;
if (pio)
__raw_writel(mask, pio + PIO_IDR);
@@ -354,9 +512,9 @@ static void gpio_irq_mask(struct irq_data *d)
static void gpio_irq_unmask(struct irq_data *d)
{
- unsigned pin = irq_to_gpio(d->irq);
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
+ struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << d->hwirq;
if (pio)
__raw_writel(mask, pio + PIO_IER);
@@ -373,23 +531,66 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
}
}
+/* Alternate irq type for PIO3 support */
+static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
+{
+ struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << d->hwirq;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ __raw_writel(mask, pio + PIO_ESR);
+ __raw_writel(mask, pio + PIO_REHLSR);
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ __raw_writel(mask, pio + PIO_ESR);
+ __raw_writel(mask, pio + PIO_FELLSR);
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ __raw_writel(mask, pio + PIO_LSR);
+ __raw_writel(mask, pio + PIO_FELLSR);
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ __raw_writel(mask, pio + PIO_LSR);
+ __raw_writel(mask, pio + PIO_REHLSR);
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ /*
+ * disable additional interrupt modes:
+ * fall back to default behavior
+ */
+ __raw_writel(mask, pio + PIO_AIMDR);
+ return 0;
+ case IRQ_TYPE_NONE:
+ default:
+ pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq));
+ return -EINVAL;
+ }
+
+ /* enable additional interrupt modes */
+ __raw_writel(mask, pio + PIO_AIMER);
+
+ return 0;
+}
+
static struct irq_chip gpio_irqchip = {
.name = "GPIO",
.irq_disable = gpio_irq_mask,
.irq_mask = gpio_irq_mask,
.irq_unmask = gpio_irq_unmask,
- .irq_set_type = gpio_irq_type,
+ /* .irq_set_type is set dynamically */
.irq_set_wake = gpio_irq_set_wake,
};
static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
{
- unsigned irq_pin;
struct irq_data *idata = irq_desc_get_irq_data(desc);
struct irq_chip *chip = irq_data_get_irq_chip(idata);
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
void __iomem *pio = at91_gpio->regbase;
- u32 isr;
+ unsigned long isr;
+ int n;
/* temporarily mask (level sensitive) parent IRQ */
chip->irq_ack(idata);
@@ -407,13 +608,10 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
continue;
}
- irq_pin = gpio_to_irq(at91_gpio->chip.base);
-
- while (isr) {
- if (isr & 1)
- generic_handle_irq(irq_pin);
- irq_pin++;
- isr >>= 1;
+ n = find_first_bit(&isr, BITS_PER_LONG);
+ while (n < BITS_PER_LONG) {
+ generic_handle_irq(irq_find_mapping(at91_gpio->domain, n));
+ n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
}
}
chip->irq_unmask(idata);
@@ -424,6 +622,33 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
#ifdef CONFIG_DEBUG_FS
+static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask)
+{
+ char *trigger = NULL;
+ char *polarity = NULL;
+
+ if (__raw_readl(pio + PIO_IMR) & mask) {
+ if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) {
+ trigger = "edge";
+ polarity = "both";
+ } else {
+ if (__raw_readl(pio + PIO_ELSR) & mask) {
+ trigger = "level";
+ polarity = __raw_readl(pio + PIO_FRLHSR) & mask ?
+ "high" : "low";
+ } else {
+ trigger = "edge";
+ polarity = __raw_readl(pio + PIO_FRLHSR) & mask ?
+ "rising" : "falling";
+ }
+ }
+ seq_printf(s, "IRQ:%s-%s\t", trigger, polarity);
+ } else {
+ seq_printf(s, "GPIO:%s\t\t",
+ __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
+ }
+}
+
static int at91_gpio_show(struct seq_file *s, void *unused)
{
int bank, j;
@@ -431,7 +656,7 @@ static int at91_gpio_show(struct seq_file *s, void *unused)
/* print heading */
seq_printf(s, "Pin\t");
for (bank = 0; bank < gpio_banks; bank++) {
- seq_printf(s, "PIO%c\t", 'A' + bank);
+ seq_printf(s, "PIO%c\t\t", 'A' + bank);
};
seq_printf(s, "\n\n");
@@ -445,11 +670,10 @@ static int at91_gpio_show(struct seq_file *s, void *unused)
unsigned mask = pin_to_mask(pin);
if (__raw_readl(pio + PIO_PSR) & mask)
- seq_printf(s, "GPIO:%s", __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
+ gpio_printf(s, pio, mask);
else
- seq_printf(s, "%s", __raw_readl(pio + PIO_ABSR) & mask ? "B" : "A");
-
- seq_printf(s, "\t");
+ seq_printf(s, "%c\t\t",
+ peripheral_function(pio, mask));
}
seq_printf(s, "\n");
@@ -488,46 +712,152 @@ postcore_initcall(at91_gpio_debugfs_init);
*/
static struct lock_class_key gpio_lock_class;
+#if defined(CONFIG_OF)
+static int at91_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct at91_gpio_chip *at91_gpio = h->host_data;
+
+ irq_set_lockdep_class(virq, &gpio_lock_class);
+
+ /*
+ * Can use the "simple" and not "edge" handler since it's
+ * shorter, and the AIC handles interrupts sanely.
+ */
+ irq_set_chip_and_handler(virq, &gpio_irqchip,
+ handle_simple_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ irq_set_chip_data(virq, at91_gpio);
+
+ return 0;
+}
+
+static struct irq_domain_ops at91_gpio_ops = {
+ .map = at91_gpio_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+int __init at91_gpio_of_irq_setup(struct device_node *node,
+ struct device_node *parent)
+{
+ struct at91_gpio_chip *prev = NULL;
+ int alias_idx = of_alias_get_id(node, "gpio");
+ struct at91_gpio_chip *at91_gpio = &gpio_chip[alias_idx];
+
+ /* Setup proper .irq_set_type function */
+ if (has_pio3())
+ gpio_irqchip.irq_set_type = alt_gpio_irq_type;
+ else
+ gpio_irqchip.irq_set_type = gpio_irq_type;
+
+ /* Disable irqs of this PIO controller */
+ __raw_writel(~0, at91_gpio->regbase + PIO_IDR);
+
+ /* Setup irq domain */
+ at91_gpio->domain = irq_domain_add_linear(node, at91_gpio->chip.ngpio,
+ &at91_gpio_ops, at91_gpio);
+ if (!at91_gpio->domain)
+ panic("at91_gpio.%d: couldn't allocate irq domain (DT).\n",
+ at91_gpio->pioc_idx);
+
+ /* Setup chained handler */
+ if (at91_gpio->pioc_idx)
+ prev = &gpio_chip[at91_gpio->pioc_idx - 1];
+
+ /* The toplevel handler handles one bank of GPIOs, except
+ * on some SoC it can handles up to three...
+ * We only set up the handler for the first of the list.
+ */
+ if (prev && prev->next == at91_gpio)
+ return 0;
+
+ at91_gpio->pioc_virq = irq_create_mapping(irq_find_host(parent),
+ at91_gpio->pioc_hwirq);
+ irq_set_chip_data(at91_gpio->pioc_virq, at91_gpio);
+ irq_set_chained_handler(at91_gpio->pioc_virq, gpio_irq_handler);
+
+ return 0;
+}
+#else
+int __init at91_gpio_of_irq_setup(struct device_node *node,
+ struct device_node *parent)
+{
+ return -EINVAL;
+}
+#endif
+
+/*
+ * irqdomain initialization: pile up irqdomains on top of AIC range
+ */
+static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio)
+{
+ int irq_base;
+
+ irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0);
+ if (irq_base < 0)
+ panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n",
+ at91_gpio->pioc_idx, irq_base);
+ at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio,
+ irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+ if (!at91_gpio->domain)
+ panic("at91_gpio.%d: couldn't allocate irq domain.\n",
+ at91_gpio->pioc_idx);
+}
+
/*
* Called from the processor-specific init to enable GPIO interrupt support.
*/
void __init at91_gpio_irq_setup(void)
{
- unsigned pioc, irq = gpio_to_irq(0);
+ unsigned pioc;
+ int gpio_irqnbr = 0;
struct at91_gpio_chip *this, *prev;
+ /* Setup proper .irq_set_type function */
+ if (has_pio3())
+ gpio_irqchip.irq_set_type = alt_gpio_irq_type;
+ else
+ gpio_irqchip.irq_set_type = gpio_irq_type;
+
for (pioc = 0, this = gpio_chip, prev = NULL;
pioc++ < gpio_banks;
prev = this, this++) {
- unsigned id = this->id;
- unsigned i;
+ int offset;
__raw_writel(~0, this->regbase + PIO_IDR);
- for (i = 0, irq = gpio_to_irq(this->chip.base); i < 32;
- i++, irq++) {
- irq_set_lockdep_class(irq, &gpio_lock_class);
+ /* setup irq domain for this GPIO controller */
+ at91_gpio_irqdomain(this);
+
+ for (offset = 0; offset < this->chip.ngpio; offset++) {
+ unsigned int virq = irq_find_mapping(this->domain, offset);
+ irq_set_lockdep_class(virq, &gpio_lock_class);
/*
* Can use the "simple" and not "edge" handler since it's
* shorter, and the AIC handles interrupts sanely.
*/
- irq_set_chip_and_handler(irq, &gpio_irqchip,
+ irq_set_chip_and_handler(virq, &gpio_irqchip,
handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
+ set_irq_flags(virq, IRQF_VALID);
+ irq_set_chip_data(virq, this);
+
+ gpio_irqnbr++;
}
/* The toplevel handler handles one bank of GPIOs, except
- * AT91SAM9263_ID_PIOCDE handles three... PIOC is first in
- * the list, so we only set up that handler.
+ * on some SoC it can handles up to three...
+ * We only set up the handler for the first of the list.
*/
if (prev && prev->next == this)
continue;
- irq_set_chip_data(id, this);
- irq_set_chained_handler(id, gpio_irq_handler);
+ this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq);
+ irq_set_chip_data(this->pioc_virq, this);
+ irq_set_chained_handler(this->pioc_virq, gpio_irq_handler);
}
- pr_info("AT91: %d gpio irqs in %d banks\n", irq - gpio_to_irq(0), gpio_banks);
+ pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks);
}
/* gpiolib support */
@@ -593,48 +923,175 @@ static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
at91_get_gpio_value(pin) ?
"set" : "clear");
else
- seq_printf(s, "[periph %s]\n",
- __raw_readl(pio + PIO_ABSR) &
- mask ? "B" : "A");
+ seq_printf(s, "[periph %c]\n",
+ peripheral_function(pio, mask));
}
}
}
+static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ int virq;
+
+ if (offset < chip->ngpio)
+ virq = irq_create_mapping(at91_gpio->domain, offset);
+ else
+ virq = -ENXIO;
+
+ dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
+ chip->label, offset + chip->base, virq);
+ return virq;
+}
+
+static int __init at91_gpio_setup_clk(int idx)
+{
+ struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
+
+ /* retreive PIO controller's clock */
+ at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
+ if (IS_ERR(at91_gpio->clock)) {
+ pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx);
+ goto err;
+ }
+
+ if (clk_prepare(at91_gpio->clock))
+ goto clk_prep_err;
+
+ /* enable PIO controller's clock */
+ if (clk_enable(at91_gpio->clock)) {
+ pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx);
+ goto clk_err;
+ }
+
+ return 0;
+
+clk_err:
+ clk_unprepare(at91_gpio->clock);
+clk_prep_err:
+ clk_put(at91_gpio->clock);
+err:
+ return -EINVAL;
+}
+
+#ifdef CONFIG_OF_GPIO
+static void __init of_at91_gpio_init_one(struct device_node *np)
+{
+ int alias_idx;
+ struct at91_gpio_chip *at91_gpio;
+
+ if (!np)
+ return;
+
+ alias_idx = of_alias_get_id(np, "gpio");
+ if (alias_idx >= MAX_GPIO_BANKS) {
+ pr_err("at91_gpio, failed alias idx(%d) > MAX_GPIO_BANKS(%d), ignoring.\n",
+ alias_idx, MAX_GPIO_BANKS);
+ return;
+ }
+
+ at91_gpio = &gpio_chip[alias_idx];
+ at91_gpio->chip.base = alias_idx * at91_gpio->chip.ngpio;
+
+ at91_gpio->regbase = of_iomap(np, 0);
+ if (!at91_gpio->regbase) {
+ pr_err("at91_gpio.%d, failed to map registers, ignoring.\n",
+ alias_idx);
+ return;
+ }
+
+ /* Get the interrupts property */
+ if (of_property_read_u32(np, "interrupts", &at91_gpio->pioc_hwirq)) {
+ pr_err("at91_gpio.%d, failed to get interrupts property, ignoring.\n",
+ alias_idx);
+ goto ioremap_err;
+ }
+
+ /* Get capabilities from compatibility property */
+ if (of_device_is_compatible(np, "atmel,at91sam9x5-gpio"))
+ at91_gpio_caps |= AT91_GPIO_CAP_PIO3;
+
+ /* Setup clock */
+ if (at91_gpio_setup_clk(alias_idx))
+ goto ioremap_err;
+
+ at91_gpio->chip.of_node = np;
+ gpio_banks = max(gpio_banks, alias_idx + 1);
+ at91_gpio->pioc_idx = alias_idx;
+ return;
+
+ioremap_err:
+ iounmap(at91_gpio->regbase);
+}
+
+static int __init of_at91_gpio_init(void)
+{
+ struct device_node *np = NULL;
+
+ /*
+ * This isn't ideal, but it gets things hooked up until this
+ * driver is converted into a platform_device
+ */
+ for_each_compatible_node(np, NULL, "atmel,at91rm9200-gpio")
+ of_at91_gpio_init_one(np);
+
+ return gpio_banks > 0 ? 0 : -EINVAL;
+}
+#else
+static int __init of_at91_gpio_init(void)
+{
+ return -EINVAL;
+}
+#endif
+
+static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
+{
+ struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
+
+ at91_gpio->chip.base = idx * at91_gpio->chip.ngpio;
+ at91_gpio->pioc_hwirq = pioc_hwirq;
+ at91_gpio->pioc_idx = idx;
+
+ at91_gpio->regbase = ioremap(regbase, 512);
+ if (!at91_gpio->regbase) {
+ pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx);
+ return;
+ }
+
+ if (at91_gpio_setup_clk(idx))
+ goto ioremap_err;
+
+ gpio_banks = max(gpio_banks, idx + 1);
+ return;
+
+ioremap_err:
+ iounmap(at91_gpio->regbase);
+}
+
/*
* Called from the processor-specific init to enable GPIO pin support.
*/
void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
{
- unsigned i;
+ unsigned i;
struct at91_gpio_chip *at91_gpio, *last = NULL;
BUG_ON(nr_banks > MAX_GPIO_BANKS);
- gpio_banks = nr_banks;
+ if (of_at91_gpio_init() < 0) {
+ /* No GPIO controller found in device tree */
+ for (i = 0; i < nr_banks; i++)
+ at91_gpio_init_one(i, data[i].regbase, data[i].id);
+ }
- for (i = 0; i < nr_banks; i++) {
+ for (i = 0; i < gpio_banks; i++) {
at91_gpio = &gpio_chip[i];
- at91_gpio->id = data[i].id;
- at91_gpio->chip.base = i * 32;
-
- at91_gpio->regbase = ioremap(data[i].regbase, 512);
- if (!at91_gpio->regbase) {
- pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", i);
- continue;
- }
-
- at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
- if (!at91_gpio->clock) {
- pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", i);
- continue;
- }
-
- /* enable PIO controller's clock */
- clk_enable(at91_gpio->clock);
-
- /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */
- if (last && last->id == at91_gpio->id)
+ /*
+ * GPIO controller are grouped on some SoC:
+ * PIOC, PIOD and PIOE can share the same IRQ line
+ */
+ if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq)
last->next = at91_gpio;
last = at91_gpio;