summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91/at91sam9261_devices.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91/at91sam9261_devices.c')
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c34
1 files changed, 30 insertions, 4 deletions
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 1e28bed..4db961a 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,6 +24,7 @@
#include <mach/board.h>
#include <mach/at91sam9261.h>
#include <mach/at91sam9261_matrix.h>
+#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include "generic.h"
@@ -236,8 +237,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
if (!data)
return;
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+ at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
/* enable pin */
if (gpio_is_valid(data->enable_pin))
@@ -414,6 +415,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
else
cs_pin = spi1_standard_cs[devices[i].chip_select];
+ if (!gpio_is_valid(cs_pin))
+ continue;
+
if (devices[i].bus_num == 0)
enable_spi0 = 1;
else
@@ -603,6 +607,8 @@ static struct resource rtt_resources[] = {
.start = AT91SAM9261_BASE_RTT,
.end = AT91SAM9261_BASE_RTT + SZ_16 - 1,
.flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_MEM,
}
};
@@ -610,11 +616,32 @@ static struct platform_device at91sam9261_rtt_device = {
.name = "at91_rtt",
.id = 0,
.resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
};
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+ at91sam9261_rtt_device.name = "rtc-at91sam9";
+ /*
+ * The second resource is needed:
+ * GPBR will serve as the storage for RTC time offset
+ */
+ at91sam9261_rtt_device.num_resources = 2;
+ rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
+ 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+ rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+ /* Only one resource is needed: RTT not used as RTC */
+ at91sam9261_rtt_device.num_resources = 1;
+}
+#endif
+
static void __init at91_add_device_rtt(void)
{
+ at91_add_device_rtt_rtc();
platform_device_register(&at91sam9261_rtt_device);
}
@@ -991,7 +1018,6 @@ static inline void configure_usart2_pins(unsigned pins)
}
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{