summaryrefslogtreecommitdiffstats
path: root/Documentation/w1/slaves
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/w1/slaves')
-rw-r--r--Documentation/w1/slaves/00-INDEX6
-rw-r--r--Documentation/w1/slaves/w1_ds242347
-rw-r--r--Documentation/w1/slaves/w1_therm41
3 files changed, 0 insertions, 94 deletions
diff --git a/Documentation/w1/slaves/00-INDEX b/Documentation/w1/slaves/00-INDEX
deleted file mode 100644
index 75613c9ac4d..00000000000
--- a/Documentation/w1/slaves/00-INDEX
+++ /dev/null
@@ -1,6 +0,0 @@
-00-INDEX
- - This file
-w1_therm
- - The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
-w1_ds2423
- - The Maxim/Dallas Semiconductor ds2423 counter device.
diff --git a/Documentation/w1/slaves/w1_ds2423 b/Documentation/w1/slaves/w1_ds2423
deleted file mode 100644
index 3f98b505a0e..00000000000
--- a/Documentation/w1/slaves/w1_ds2423
+++ /dev/null
@@ -1,47 +0,0 @@
-Kernel driver w1_ds2423
-=======================
-
-Supported chips:
- * Maxim DS2423 based counter devices.
-
-supported family codes:
- W1_THERM_DS2423 0x1D
-
-Author: Mika Laitio <lamikr@pilppa.org>
-
-Description
------------
-
-Support is provided through the sysfs w1_slave file. Each opening and
-read sequence of w1_slave file initiates the read of counters and ram
-available in DS2423 pages 12 - 15.
-
-Result of each page is provided as an ASCII output where each counter
-value and associated ram buffer is outpputed to own line.
-
-Each lines will contain the values of 42 bytes read from the counter and
-memory page along the crc=YES or NO for indicating whether the read operation
-was successful and CRC matched.
-If the operation was successful, there is also in the end of each line
-a counter value expressed as an integer after c=
-
-Meaning of 42 bytes represented is following:
- - 1 byte from ram page
- - 4 bytes for the counter value
- - 4 zero bytes
- - 2 bytes for crc16 which was calculated from the data read since the previous crc bytes
- - 31 remaining bytes from the ram page
- - crc=YES/NO indicating whether read was ok and crc matched
- - c=<int> current counter value
-
-example from the successful read:
-00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
-00 02 00 00 00 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
-00 29 c6 5d 18 00 00 00 00 04 37 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=408798761
-00 05 00 00 00 00 00 00 00 8d 39 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff crc=YES c=5
-
-example from the read with crc errors:
-00 02 00 00 00 00 00 00 00 6d 38 00 ff ff 00 00 fe ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=YES c=2
-00 02 00 00 22 00 00 00 00 e0 1f 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=NO
-00 e1 61 5d 19 00 00 00 00 df 0b 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff 00 00 ff ff crc=NO
-00 05 00 00 20 00 00 00 00 8d 39 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff crc=NO
diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm
deleted file mode 100644
index 0403aaaba87..00000000000
--- a/Documentation/w1/slaves/w1_therm
+++ /dev/null
@@ -1,41 +0,0 @@
-Kernel driver w1_therm
-====================
-
-Supported chips:
- * Maxim ds18*20 based temperature sensors.
-
-Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
-
-
-Description
------------
-
-w1_therm provides basic temperature conversion for ds18*20 devices.
-supported family codes:
-W1_THERM_DS18S20 0x10
-W1_THERM_DS1822 0x22
-W1_THERM_DS18B20 0x28
-
-Support is provided through the sysfs w1_slave file. Each open and
-read sequence will initiate a temperature conversion then provide two
-lines of ASCII output. The first line contains the nine hex bytes
-read along with a calculated crc value and YES or NO if it matched.
-If the crc matched the returned values are retained. The second line
-displays the retained values along with a temperature in millidegrees
-Centigrade after t=.
-
-Parasite powered devices are limited to one slave performing a
-temperature conversion at a time. If none of the devices are parasite
-powered it would be possible to convert all the devices at the same
-time and then go back to read individual sensors. That isn't
-currently supported. The driver also doesn't support reduced
-precision (which would also reduce the conversion time).
-
-The module parameter strong_pullup can be set to 0 to disable the
-strong pullup or 1 to enable. If enabled the 5V strong pullup will be
-enabled when the conversion is taking place provided the master driver
-must support the strong pullup (or it falls back to a pullup
-resistor). The DS18b20 temperature sensor specification lists a
-maximum current draw of 1.5mA and that a 5k pullup resistor is not
-sufficient. The strong pullup is designed to provide the additional
-current required.