summaryrefslogtreecommitdiffstats
path: root/Documentation/svga.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/svga.txt')
-rw-r--r--Documentation/svga.txt276
1 files changed, 0 insertions, 276 deletions
diff --git a/Documentation/svga.txt b/Documentation/svga.txt
deleted file mode 100644
index cd66ec8..0000000
--- a/Documentation/svga.txt
+++ /dev/null
@@ -1,276 +0,0 @@
- Video Mode Selection Support 2.13
- (c) 1995--1999 Martin Mares, <mj@ucw.cz>
---------------------------------------------------------------------------------
-
-1. Intro
-~~~~~~~~
- This small document describes the "Video Mode Selection" feature which
-allows the use of various special video modes supported by the video BIOS. Due
-to usage of the BIOS, the selection is limited to boot time (before the
-kernel decompression starts) and works only on 80X86 machines.
-
- ** Short intro for the impatient: Just use vga=ask for the first time,
- ** enter `scan' on the video mode prompt, pick the mode you want to use,
- ** remember its mode ID (the four-digit hexadecimal number) and then
- ** set the vga parameter to this number (converted to decimal first).
-
- The video mode to be used is selected by a kernel parameter which can be
-specified in the kernel Makefile (the SVGA_MODE=... line) or by the "vga=..."
-option of LILO (or some other boot loader you use) or by the "vidmode" utility
-(present in standard Linux utility packages). You can use the following values
-of this parameter:
-
- NORMAL_VGA - Standard 80x25 mode available on all display adapters.
-
- EXTENDED_VGA - Standard 8-pixel font mode: 80x43 on EGA, 80x50 on VGA.
-
- ASK_VGA - Display a video mode menu upon startup (see below).
-
- 0..35 - Menu item number (when you have used the menu to view the list of
- modes available on your adapter, you can specify the menu item you want
- to use). 0..9 correspond to "0".."9", 10..35 to "a".."z". Warning: the
- mode list displayed may vary as the kernel version changes, because the
- modes are listed in a "first detected -- first displayed" manner. It's
- better to use absolute mode numbers instead.
-
- 0x.... - Hexadecimal video mode ID (also displayed on the menu, see below
- for exact meaning of the ID). Warning: rdev and LILO don't support
- hexadecimal numbers -- you have to convert it to decimal manually.
-
-2. Menu
-~~~~~~~
- The ASK_VGA mode causes the kernel to offer a video mode menu upon
-bootup. It displays a "Press <RETURN> to see video modes available, <SPACE>
-to continue or wait 30 secs" message. If you press <RETURN>, you enter the
-menu, if you press <SPACE> or wait 30 seconds, the kernel will boot up in
-the standard 80x25 mode.
-
- The menu looks like:
-
-Video adapter: <name-of-detected-video-adapter>
-Mode: COLSxROWS:
-0 0F00 80x25
-1 0F01 80x50
-2 0F02 80x43
-3 0F03 80x26
-....
-Enter mode number or `scan': <flashing-cursor-here>
-
- <name-of-detected-video-adapter> tells what video adapter did Linux detect
--- it's either a generic adapter name (MDA, CGA, HGC, EGA, VGA, VESA VGA [a VGA
-with VESA-compliant BIOS]) or a chipset name (e.g., Trident). Direct detection
-of chipsets is turned off by default (see CONFIG_VIDEO_SVGA in chapter 4 to see
-how to enable it if you really want) as it's inherently unreliable due to
-absolutely insane PC design.
-
- "0 0F00 80x25" means that the first menu item (the menu items are numbered
-from "0" to "9" and from "a" to "z") is a 80x25 mode with ID=0x0f00 (see the
-next section for a description of mode IDs).
-
- <flashing-cursor-here> encourages you to enter the item number or mode ID
-you wish to set and press <RETURN>. If the computer complains something about
-"Unknown mode ID", it is trying to tell you that it isn't possible to set such
-a mode. It's also possible to press only <RETURN> which leaves the current mode.
-
- The mode list usually contains a few basic modes and some VESA modes. In
-case your chipset has been detected, some chipset-specific modes are shown as
-well (some of these might be missing or unusable on your machine as different
-BIOSes are often shipped with the same card and the mode numbers depend purely
-on the VGA BIOS).
-
- The modes displayed on the menu are partially sorted: The list starts with
-the standard modes (80x25 and 80x50) followed by "special" modes (80x28 and
-80x43), local modes (if the local modes feature is enabled), VESA modes and
-finally SVGA modes for the auto-detected adapter.
-
- If you are not happy with the mode list offered (e.g., if you think your card
-is able to do more), you can enter "scan" instead of item number / mode ID. The
-program will try to ask the BIOS for all possible video mode numbers and test
-what happens then. The screen will be probably flashing wildly for some time and
-strange noises will be heard from inside the monitor and so on and then, really
-all consistent video modes supported by your BIOS will appear (plus maybe some
-`ghost modes'). If you are afraid this could damage your monitor, don't use this
-function.
-
- After scanning, the mode ordering is a bit different: the auto-detected SVGA
-modes are not listed at all and the modes revealed by `scan' are shown before
-all VESA modes.
-
-3. Mode IDs
-~~~~~~~~~~~
- Because of the complexity of all the video stuff, the video mode IDs
-used here are also a bit complex. A video mode ID is a 16-bit number usually
-expressed in a hexadecimal notation (starting with "0x"). You can set a mode
-by entering its mode directly if you know it even if it isn't shown on the menu.
-
-The ID numbers can be divided to three regions:
-
- 0x0000 to 0x00ff - menu item references. 0x0000 is the first item. Don't use
- outside the menu as this can change from boot to boot (especially if you
- have used the `scan' feature).
-
- 0x0100 to 0x017f - standard BIOS modes. The ID is a BIOS video mode number
- (as presented to INT 10, function 00) increased by 0x0100.
-
- 0x0200 to 0x08ff - VESA BIOS modes. The ID is a VESA mode ID increased by
- 0x0100. All VESA modes should be autodetected and shown on the menu.
-
- 0x0900 to 0x09ff - Video7 special modes. Set by calling INT 0x10, AX=0x6f05.
- (Usually 940=80x43, 941=132x25, 942=132x44, 943=80x60, 944=100x60,
- 945=132x28 for the standard Video7 BIOS)
-
- 0x0f00 to 0x0fff - special modes (they are set by various tricks -- usually
- by modifying one of the standard modes). Currently available:
- 0x0f00 standard 80x25, don't reset mode if already set (=FFFF)
- 0x0f01 standard with 8-point font: 80x43 on EGA, 80x50 on VGA
- 0x0f02 VGA 80x43 (VGA switched to 350 scanlines with a 8-point font)
- 0x0f03 VGA 80x28 (standard VGA scans, but 14-point font)
- 0x0f04 leave current video mode
- 0x0f05 VGA 80x30 (480 scans, 16-point font)
- 0x0f06 VGA 80x34 (480 scans, 14-point font)
- 0x0f07 VGA 80x60 (480 scans, 8-point font)
- 0x0f08 Graphics hack (see the CONFIG_VIDEO_HACK paragraph below)
-
- 0x1000 to 0x7fff - modes specified by resolution. The code has a "0xRRCC"
- form where RR is a number of rows and CC is a number of columns.
- E.g., 0x1950 corresponds to a 80x25 mode, 0x2b84 to 132x43 etc.
- This is the only fully portable way to refer to a non-standard mode,
- but it relies on the mode being found and displayed on the menu
- (remember that mode scanning is not done automatically).
-
- 0xff00 to 0xffff - aliases for backward compatibility:
- 0xffff equivalent to 0x0f00 (standard 80x25)
- 0xfffe equivalent to 0x0f01 (EGA 80x43 or VGA 80x50)
-
- If you add 0x8000 to the mode ID, the program will try to recalculate
-vertical display timing according to mode parameters, which can be used to
-eliminate some annoying bugs of certain VGA BIOSes (usually those used for
-cards with S3 chipsets and old Cirrus Logic BIOSes) -- mainly extra lines at the
-end of the display.
-
-4. Options
-~~~~~~~~~~
- Some options can be set in the source text (in arch/i386/boot/video.S).
-All of them are simple #define's -- change them to #undef's when you want to
-switch them off. Currently supported:
-
- CONFIG_VIDEO_SVGA - enables autodetection of SVGA cards. This is switched
-off by default as it's a bit unreliable due to terribly bad PC design. If you
-really want to have the adapter autodetected (maybe in case the `scan' feature
-doesn't work on your machine), switch this on and don't cry if the results
-are not completely sane. In case you really need this feature, please drop me
-a mail as I think of removing it some day.
-
- CONFIG_VIDEO_VESA - enables autodetection of VESA modes. If it doesn't work
-on your machine (or displays a "Error: Scanning of VESA modes failed" message),
-you can switch it off and report as a bug.
-
- CONFIG_VIDEO_COMPACT - enables compacting of the video mode list. If there
-are more modes with the same screen size, only the first one is kept (see above
-for more info on mode ordering). However, in very strange cases it's possible
-that the first "version" of the mode doesn't work although some of the others
-do -- in this case turn this switch off to see the rest.
-
- CONFIG_VIDEO_RETAIN - enables retaining of screen contents when switching
-video modes. Works only with some boot loaders which leave enough room for the
-buffer. (If you have old LILO, you can adjust heap_end_ptr and loadflags
-in setup.S, but it's better to upgrade the boot loader...)
-
- CONFIG_VIDEO_LOCAL - enables inclusion of "local modes" in the list. The
-local modes are added automatically to the beginning of the list not depending
-on hardware configuration. The local modes are listed in the source text after
-the "local_mode_table:" line. The comment before this line describes the format
-of the table (which also includes a video card name to be displayed on the
-top of the menu).
-
- CONFIG_VIDEO_400_HACK - force setting of 400 scan lines for standard VGA
-modes. This option is intended to be used on certain buggy BIOSes which draw
-some useless logo using font download and then fail to reset the correct mode.
-Don't use unless needed as it forces resetting the video card.
-
- CONFIG_VIDEO_GFX_HACK - includes special hack for setting of graphics modes
-to be used later by special drivers (e.g., 800x600 on IBM ThinkPad -- see
-ftp://ftp.phys.keio.ac.jp/pub/XFree86/800x600/XF86Configs/XF86Config.IBM_TP560).
-Allows to set _any_ BIOS mode including graphic ones and forcing specific
-text screen resolution instead of peeking it from BIOS variables. Don't use
-unless you think you know what you're doing. To activate this setup, use
-mode number 0x0f08 (see section 3).
-
-5. Still doesn't work?
-~~~~~~~~~~~~~~~~~~~~~~
- When the mode detection doesn't work (e.g., the mode list is incorrect or
-the machine hangs instead of displaying the menu), try to switch off some of
-the configuration options listed in section 4. If it fails, you can still use
-your kernel with the video mode set directly via the kernel parameter.
-
- In either case, please send me a bug report containing what _exactly_
-happens and how do the configuration switches affect the behaviour of the bug.
-
- If you start Linux from M$-DOS, you might also use some DOS tools for
-video mode setting. In this case, you must specify the 0x0f04 mode ("leave
-current settings") to Linux, because if you don't and you use any non-standard
-mode, Linux will switch to 80x25 automatically.
-
- If you set some extended mode and there's one or more extra lines on the
-bottom of the display containing already scrolled-out text, your VGA BIOS
-contains the most common video BIOS bug called "incorrect vertical display
-end setting". Adding 0x8000 to the mode ID might fix the problem. Unfortunately,
-this must be done manually -- no autodetection mechanisms are available.
-
- If you have a VGA card and your display still looks as on EGA, your BIOS
-is probably broken and you need to set the CONFIG_VIDEO_400_HACK switch to
-force setting of the correct mode.
-
-6. History
-~~~~~~~~~~
-1.0 (??-Nov-95) First version supporting all adapters supported by the old
- setup.S + Cirrus Logic 54XX. Present in some 1.3.4? kernels
- and then removed due to instability on some machines.
-2.0 (28-Jan-96) Rewritten from scratch. Cirrus Logic 64XX support added, almost
- everything is configurable, the VESA support should be much more
- stable, explicit mode numbering allowed, "scan" implemented etc.
-2.1 (30-Jan-96) VESA modes moved to 0x200-0x3ff. Mode selection by resolution
- supported. Few bugs fixed. VESA modes are listed prior to
- modes supplied by SVGA autodetection as they are more reliable.
- CLGD autodetect works better. Doesn't depend on 80x25 being
- active when started. Scanning fixed. 80x43 (any VGA) added.
- Code cleaned up.
-2.2 (01-Feb-96) EGA 80x43 fixed. VESA extended to 0x200-0x4ff (non-standard 02XX
- VESA modes work now). Display end bug workaround supported.
- Special modes renumbered to allow adding of the "recalculate"
- flag, 0xffff and 0xfffe became aliases instead of real IDs.
- Screen contents retained during mode changes.
-2.3 (15-Mar-96) Changed to work with 1.3.74 kernel.
-2.4 (18-Mar-96) Added patches by Hans Lermen fixing a memory overwrite problem
- with some boot loaders. Memory management rewritten to reflect
- these changes. Unfortunately, screen contents retaining works
- only with some loaders now.
- Added a Tseng 132x60 mode.
-2.5 (19-Mar-96) Fixed a VESA mode scanning bug introduced in 2.4.
-2.6 (25-Mar-96) Some VESA BIOS errors not reported -- it fixes error reports on
- several cards with broken VESA code (e.g., ATI VGA).
-2.7 (09-Apr-96) - Accepted all VESA modes in range 0x100 to 0x7ff, because some
- cards use very strange mode numbers.
- - Added Realtek VGA modes (thanks to Gonzalo Tornaria).
- - Hardware testing order slightly changed, tests based on ROM
- contents done as first.
- - Added support for special Video7 mode switching functions
- (thanks to Tom Vander Aa).
- - Added 480-scanline modes (especially useful for notebooks,
- original version written by hhanemaa@cs.ruu.nl, patched by
- Jeff Chua, rewritten by me).
- - Screen store/restore fixed.
-2.8 (14-Apr-96) - Previous release was not compilable without CONFIG_VIDEO_SVGA.
- - Better recognition of text modes during mode scan.
-2.9 (12-May-96) - Ignored VESA modes 0x80 - 0xff (more VESA BIOS bugs!)
-2.10 (11-Nov-96)- The whole thing made optional.
- - Added the CONFIG_VIDEO_400_HACK switch.
- - Added the CONFIG_VIDEO_GFX_HACK switch.
- - Code cleanup.
-2.11 (03-May-97)- Yet another cleanup, now including also the documentation.
- - Direct testing of SVGA adapters turned off by default, `scan'
- offered explicitly on the prompt line.
- - Removed the doc section describing adding of new probing
- functions as I try to get rid of _all_ hardware probing here.
-2.12 (25-May-98)- Added support for VESA frame buffer graphics.
-2.13 (14-May-99)- Minor documentation fixes.