path: root/Documentation/sound/oss/ESS1868
diff options
Diffstat (limited to 'Documentation/sound/oss/ESS1868')
1 files changed, 0 insertions, 55 deletions
diff --git a/Documentation/sound/oss/ESS1868 b/Documentation/sound/oss/ESS1868
deleted file mode 100644
index 55e922f..0000000
--- a/Documentation/sound/oss/ESS1868
+++ /dev/null
@@ -1,55 +0,0 @@
-Documentation for the ESS1868F AudioDrive PnP sound card
-The ESS1868 sound card is a PnP ESS1688-compatible 16-bit sound card.
-It should be automatically detected by the Linux Kernel isapnp support when you
-load the sb.o module. Otherwise you should take care of:
- * The ESS1868 does not allow use of a 16-bit DMA, thus DMA 0, 1, 2, and 3
- may only be used.
- * isapnptools version 1.14 does work with ESS1868. Earlier versions might
- not.
- * Sound support MUST be compiled as MODULES, not statically linked
- into the kernel.
-NOTE: this is only needed when not using the kernel isapnp support!
-For configuring the sound card's I/O addresses, IRQ and DMA, here is a
-sample copy of the isapnp.conf directives regarding the ESS1868:
-(CONFIGURE ESS1868/-1 (LD 1
-(IO 0 (BASE 0x0220))
-(IO 1 (BASE 0x0388))
-(IO 2 (BASE 0x0330))
-(DMA 0 (CHANNEL 1))
-(INT 0 (IRQ 5 (MODE +E)))
-(ACT Y)
-(for a full working isapnp.conf file, remember the
-at the beginning and the
-at the end.)
-In this setup, the main card I/O is 0x0220, FM synthesizer is 0x0388, and
-the MPU-401 MIDI port is located at 0x0330. IRQ is IRQ 5, DMA is channel 1.
-After configuring the sound card via isapnp, to use the card you must load
-the sound modules with the proper I/O information. Here is my setup:
-# ESS1868F AudioDrive initialization
-/sbin/modprobe sound
-/sbin/insmod uart401
-/sbin/insmod sb io=0x220 irq=5 dma=1 dma16=-1
-/sbin/insmod mpu401 io=0x330
-/sbin/insmod opl3 io=0x388
-/sbin/insmod v_midi
-opl3 is the FM synthesizer
-/sbin/insmod opl3 io=0x388