summaryrefslogtreecommitdiffstats
path: root/Documentation/sound/oss/CMI8330
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/oss/CMI8330')
-rw-r--r--Documentation/sound/oss/CMI8330152
1 files changed, 0 insertions, 152 deletions
diff --git a/Documentation/sound/oss/CMI8330 b/Documentation/sound/oss/CMI8330
deleted file mode 100644
index 8a5fd16..0000000
--- a/Documentation/sound/oss/CMI8330
+++ /dev/null
@@ -1,152 +0,0 @@
-Documentation for CMI 8330 (SoundPRO)
--------------------------------------
-Alessandro Zummo <azummo@ita.flashnet.it>
-
-( Be sure to read Documentation/sound/oss/SoundPro too )
-
-
-This adapter is now directly supported by the sb driver.
-
- The only thing you have to do is to compile the kernel sound
-support as a module and to enable kernel ISAPnP support,
-as shown below.
-
-
-CONFIG_SOUND=m
-CONFIG_SOUND_SB=m
-
-CONFIG_PNP=y
-CONFIG_ISAPNP=y
-
-
-and optionally:
-
-
-CONFIG_SOUND_MPU401=m
-
- for MPU401 support.
-
-
-(I suggest you to use "make menuconfig" or "make xconfig"
- for a more comfortable configuration editing)
-
-
-
-Then you can do
-
- modprobe sb
-
-and everything will be (hopefully) configured.
-
-You should get something similar in syslog:
-
-sb: CMI8330 detected.
-sb: CMI8330 sb base located at 0x220
-sb: CMI8330 mpu base located at 0x330
-sb: CMI8330 mail reports to Alessandro Zummo <azummo@ita.flashnet.it>
-sb: ISAPnP reports CMI 8330 SoundPRO at i/o 0x220, irq 7, dma 1,5
-
-
-
-
-The old documentation file follows for reference
-purposes.
-
-
-How to enable CMI 8330 (SOUNDPRO) soundchip on Linux
-------------------------------------------
-Stefan Laudat <Stefan.Laudat@asit.ro>
-
-[Note: The CMI 8338 is unrelated and is supported by cmpci.o]
-
-
- In order to use CMI8330 under Linux you just have to use a proper isapnp.conf, a good isapnp and a little bit of patience. I use isapnp 1.17, but
-you may get a better one I guess at http://www.roestock.demon.co.uk/isapnptools/.
-
- Of course you will have to compile kernel sound support as module, as shown below:
-
-CONFIG_SOUND=m
-CONFIG_SOUND_OSS=m
-CONFIG_SOUND_SB=m
-CONFIG_SOUND_ADLIB=m
-CONFIG_SOUND_MPU401=m
-# Mikro$chaft sound system (kinda useful here ;))
-CONFIG_SOUND_MSS=m
-
- The /etc/isapnp.conf file will be:
-
-<snip below>
-
-
-(READPORT 0x0203)
-(ISOLATE PRESERVE)
-(IDENTIFY *)
-(VERBOSITY 2)
-(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
-(VERIFYLD N)
-
-
-# WSS
-
-(CONFIGURE CMI0001/16777472 (LD 0
-(IO 0 (SIZE 8) (BASE 0x0530))
-(IO 1 (SIZE 8) (BASE 0x0388))
-(INT 0 (IRQ 7 (MODE +E)))
-(DMA 0 (CHANNEL 0))
-(NAME "CMI0001/16777472[0]{CMI8330/C3D Audio Adapter}")
-(ACT Y)
-))
-
-# MPU
-
-(CONFIGURE CMI0001/16777472 (LD 1
-(IO 0 (SIZE 2) (BASE 0x0330))
-(INT 0 (IRQ 11 (MODE +E)))
-(NAME "CMI0001/16777472[1]{CMI8330/C3D Audio Adapter}")
-(ACT Y)
-))
-
-# Joystick
-
-(CONFIGURE CMI0001/16777472 (LD 2
-(IO 0 (SIZE 8) (BASE 0x0200))
-(NAME "CMI0001/16777472[2]{CMI8330/C3D Audio Adapter}")
-(ACT Y)
-))
-
-# SoundBlaster
-
-(CONFIGURE CMI0001/16777472 (LD 3
-(IO 0 (SIZE 16) (BASE 0x0220))
-(INT 0 (IRQ 5 (MODE +E)))
-(DMA 0 (CHANNEL 1))
-(DMA 1 (CHANNEL 5))
-(NAME "CMI0001/16777472[3]{CMI8330/C3D Audio Adapter}")
-(ACT Y)
-))
-
-
-(WAITFORKEY)
-
-<end of snip>
-
- The module sequence is trivial:
-
-/sbin/insmod soundcore
-/sbin/insmod sound
-/sbin/insmod uart401
-# insert this first
-/sbin/insmod ad1848 io=0x530 irq=7 dma=0 soundpro=1
-# The sb module is an alternative to the ad1848 (Microsoft Sound System)
-# Anyhow, this is full duplex and has MIDI
-/sbin/insmod sb io=0x220 dma=1 dma16=5 irq=5 mpu_io=0x330
-
-
-
-Alma Chao <elysian@ethereal.torsion.org> suggests the following in
-a /etc/modprobe.d/*conf file:
-
-alias sound ad1848
-alias synth0 opl3
-options ad1848 io=0x530 irq=7 dma=0 soundpro=1
-options opl3 io=0x388