summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/dmfe.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/dmfe.txt')
-rw-r--r--Documentation/networking/dmfe.txt66
1 files changed, 0 insertions, 66 deletions
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
deleted file mode 100644
index 25320bf..0000000
--- a/Documentation/networking/dmfe.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Note: This driver doesn't have a maintainer.
-
-Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
-
-This program is free software; you can redistribute it and/or
-modify it under the terms of the GNU General Public License
-as published by the Free Software Foundation; either version 2
-of the License, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-
-This driver provides kernel support for Davicom DM9102(A)/DM9132/DM9801 ethernet cards ( CNET
-10/100 ethernet cards uses Davicom chipset too, so this driver supports CNET cards too ).If you
-didn't compile this driver as a module, it will automatically load itself on boot and print a
-line similar to :
-
- dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
-
-If you compiled this driver as a module, you have to load it on boot.You can load it with command :
-
- insmod dmfe
-
-This way it will autodetect the device mode.This is the suggested way to load the module.Or you can pass
-a mode= setting to module while loading, like :
-
- insmod dmfe mode=0 # Force 10M Half Duplex
- insmod dmfe mode=1 # Force 100M Half Duplex
- insmod dmfe mode=4 # Force 10M Full Duplex
- insmod dmfe mode=5 # Force 100M Full Duplex
-
-Next you should configure your network interface with a command similar to :
-
- ifconfig eth0 172.22.3.18
- ^^^^^^^^^^^
- Your IP Address
-
-Then you may have to modify the default routing table with command :
-
- route add default eth0
-
-
-Now your ethernet card should be up and running.
-
-
-TODO:
-
-Implement pci_driver::suspend() and pci_driver::resume() power management methods.
-Check on 64 bit boxes.
-Check and fix on big endian boxes.
-Test and make sure PCI latency is now correct for all cases.
-
-
-Authors:
-
-Sten Wang <sten_wang@davicom.com.tw > : Original Author
-
-Contributors:
-
-Marcelo Tosatti <marcelo@conectiva.com.br>
-Alan Cox <alan@lxorguk.ukuu.org.uk>
-Jeff Garzik <jgarzik@pobox.com>
-Vojtech Pavlik <vojtech@suse.cz>