summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.syncppp
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.syncppp')
-rw-r--r--Documentation/isdn/README.syncppp58
1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/isdn/README.syncppp b/Documentation/isdn/README.syncppp
deleted file mode 100644
index 27d2600..0000000
--- a/Documentation/isdn/README.syncppp
+++ /dev/null
@@ -1,58 +0,0 @@
-Some additional information for setting up a syncPPP
-connection using network interfaces.
----------------------------------------------------------------
-
-You need one thing beside the isdn4linux package:
-
- a patched pppd .. (I called it ipppd to show the difference)
-
-Compiling isdn4linux with sync PPP:
------------------------------------
-To compile isdn4linux with the sync PPP part, you have
-to answer the appropriate question when doing a "make config"
-Don't forget to load the slhc.o
-module before the isdn.o module, if VJ-compression support
-is not compiled into your kernel. (e.g if you have no PPP or
-CSLIP in the kernel)
-
-Using isdn4linux with sync PPP:
--------------------------------
-Sync PPP is just another encapsulation for isdn4linux. The
-name to enable sync PPP encapsulation is 'syncppp' .. e.g:
-
- /sbin/isdnctrl encap ippp0 syncppp
-
-The name of the interface is here 'ippp0'. You need
-one interface with the name 'ippp0' to saturate the
-ipppd, which checks the ppp version via this interface.
-Currently, all devices must have the name ipppX where
-'X' is a decimal value.
-
-To set up a PPP connection you need the ipppd .. You must start
-the ipppd once after installing the modules. The ipppd
-communicates with the isdn4linux link-level driver using the
-/dev/ippp0 to /dev/ippp15 devices. One ipppd can handle
-all devices at once. If you want to use two PPP connections
-at the same time, you have to connect the ipppd to two
-devices .. and so on.
-I've implemented one additional option for the ipppd:
- 'useifip' will get (if set to not 0.0.0.0) the IP address
- for the negotiation from the attached network-interface.
-(also: ipppd will try to negotiate pointopoint IP as remote IP)
-You must disable BSD-compression, this implementation can't
-handle compressed packets.
-
-Check the etc/rc.isdn.syncppp in the isdn4kernel-util package
-for an example setup script.
-
-To use the MPPP stuff, you must configure a slave device
-with isdn4linux. Now call the ipppd with the '+mp' option.
-To increase the number of links, you must use the
-'addlink' option of the isdnctrl tool. (rc.isdn.syncppp.MPPP is
-an example script)
-
-enjoy it,
- michael
-
-
-