summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.gigaset
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.gigaset')
-rw-r--r--Documentation/isdn/README.gigaset16
1 files changed, 7 insertions, 9 deletions
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index ef3343e..7534c60 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -97,8 +97,7 @@ GigaSet 307x Device Driver
2.5.): 1=on (default), 0=off
Depending on your distribution you may want to create a separate module
- configuration file /etc/modprobe.d/gigaset for these, or add them to a
- custom file like /etc/modprobe.conf.local.
+ configuration file like /etc/modprobe.d/gigaset.conf for these.
2.2. Device nodes for user space programs
------------------------------------
@@ -212,8 +211,8 @@ GigaSet 307x Device Driver
options ppp_async flag_time=0
- to an appropriate module configuration file, like /etc/modprobe.d/gigaset
- or /etc/modprobe.conf.local.
+ to an appropriate module configuration file, like
+ /etc/modprobe.d/gigaset.conf.
Unimodem mode is needed for making some devices [e.g. SX100] work which
do not support the regular Gigaset command set. If debug output (see
@@ -237,8 +236,8 @@ GigaSet 307x Device Driver
modprobe usb_gigaset startmode=0
or by adding a line like
options usb_gigaset startmode=0
- to an appropriate module configuration file, like /etc/modprobe.d/gigaset
- or /etc/modprobe.conf.local.
+ to an appropriate module configuration file, like
+ /etc/modprobe.d/gigaset.conf
2.6. Call-ID (CID) mode
------------------
@@ -310,7 +309,7 @@ GigaSet 307x Device Driver
options isdn dialtimeout=15
- to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
+ to /etc/modprobe.d/gigaset.conf or a similar file.
Problem:
The isdnlog program emits error messages or just doesn't work.
@@ -350,8 +349,7 @@ GigaSet 307x Device Driver
The initial value can be set using the debug parameter when loading the
module "gigaset", e.g. by adding a line
options gigaset debug=0
- to your module configuration file, eg. /etc/modprobe.d/gigaset or
- /etc/modprobe.conf.local.
+ to your module configuration file, eg. /etc/modprobe.d/gigaset.conf
Generated debugging information can be found
- as output of the command