summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.fax
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.fax')
-rw-r--r--Documentation/isdn/README.fax45
1 files changed, 0 insertions, 45 deletions
diff --git a/Documentation/isdn/README.fax b/Documentation/isdn/README.fax
deleted file mode 100644
index 5314958a..0000000
--- a/Documentation/isdn/README.fax
+++ /dev/null
@@ -1,45 +0,0 @@
-
-Fax with isdn4linux
-===================
-
-When enabled during kernel configuration, the tty emulator
-of the ISDN subsystem is capable of the Fax Class 2 commands.
-
-This only makes sense under the following conditions :
-
-- You need the commands as dummy, because you are using
- hylafax (with patch) for AVM capi.
-- You want to use the fax capabilities of your isdn-card.
- (supported cards are listed below)
-
-
-NOTE: This implementation does *not* support fax with passive
- ISDN-cards (known as softfax). The low-level driver of
- the ISDN-card and/or the card itself must support this.
-
-
-Supported ISDN-Cards
---------------------
-
-Eicon DIVA Server BRI/PCI
- - full support with both B-channels.
-
-Eicon DIVA Server 4BRI/PCI
- - full support with all B-channels.
-
-Eicon DIVA Server PRI/PCI
- - full support on amount of B-channels
- depending on DSPs on board.
-
-
-
-The command set is known as Class 2 (not Class 2.0) and
-can be activated by AT+FCLASS=2
-
-
-The interface between the link-level-module and the hardware-level driver
-is described in the files INTERFACE.fax and INTERFACE.
-
-Armin
-mac@melware.de
-