summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/ltc2978
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/ltc2978')
-rw-r--r--Documentation/hwmon/ltc2978103
1 files changed, 0 insertions, 103 deletions
diff --git a/Documentation/hwmon/ltc2978 b/Documentation/hwmon/ltc2978
deleted file mode 100644
index c365f9b..0000000
--- a/Documentation/hwmon/ltc2978
+++ /dev/null
@@ -1,103 +0,0 @@
-Kernel driver ltc2978
-=====================
-
-Supported chips:
- * Linear Technology LTC2978
- Prefix: 'ltc2978'
- Addresses scanned: -
- Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
- * Linear Technology LTC3880
- Prefix: 'ltc3880'
- Addresses scanned: -
- Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
-
-Author: Guenter Roeck <guenter.roeck@ericsson.com>
-
-
-Description
------------
-
-The LTC2978 is an octal power supply monitor, supervisor, sequencer and
-margin controller. The LTC3880 is a dual, PolyPhase DC/DC synchronous
-step-down switching regulator controller.
-
-
-Usage Notes
------------
-
-This driver does not probe for PMBus devices. You will have to instantiate
-devices explicitly.
-
-Example: the following commands will load the driver for an LTC2978 at address
-0x60 on I2C bus #1:
-
-# modprobe ltc2978
-# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
-
-
-Sysfs attributes
-----------------
-
-in1_label "vin"
-in1_input Measured input voltage.
-in1_min Minimum input voltage.
-in1_max Maximum input voltage.
-in1_lcrit Critical minimum input voltage.
-in1_crit Critical maximum input voltage.
-in1_min_alarm Input voltage low alarm.
-in1_max_alarm Input voltage high alarm.
-in1_lcrit_alarm Input voltage critical low alarm.
-in1_crit_alarm Input voltage critical high alarm.
-in1_lowest Lowest input voltage. LTC2978 only.
-in1_highest Highest input voltage.
-in1_reset_history Reset history. Writing into this attribute will reset
- history for all attributes.
-
-in[2-9]_label "vout[1-8]". Channels 3 to 9 on LTC2978 only.
-in[2-9]_input Measured output voltage.
-in[2-9]_min Minimum output voltage.
-in[2-9]_max Maximum output voltage.
-in[2-9]_lcrit Critical minimum output voltage.
-in[2-9]_crit Critical maximum output voltage.
-in[2-9]_min_alarm Output voltage low alarm.
-in[2-9]_max_alarm Output voltage high alarm.
-in[2-9]_lcrit_alarm Output voltage critical low alarm.
-in[2-9]_crit_alarm Output voltage critical high alarm.
-in[2-9]_lowest Lowest output voltage. LTC2978 only.
-in[2-9]_highest Lowest output voltage.
-in[2-9]_reset_history Reset history. Writing into this attribute will reset
- history for all attributes.
-
-temp[1-3]_input Measured temperature.
- On LTC2978, only one temperature measurement is
- supported and reflects the internal temperature.
- On LTC3880, temp1 and temp2 report external
- temperatures, and temp3 reports the internal
- temperature.
-temp[1-3]_min Mimimum temperature.
-temp[1-3]_max Maximum temperature.
-temp[1-3]_lcrit Critical low temperature.
-temp[1-3]_crit Critical high temperature.
-temp[1-3]_min_alarm Chip temperature low alarm.
-temp[1-3]_max_alarm Chip temperature high alarm.
-temp[1-3]_lcrit_alarm Chip temperature critical low alarm.
-temp[1-3]_crit_alarm Chip temperature critical high alarm.
-temp[1-3]_lowest Lowest measured temperature. LTC2978 only.
-temp[1-3]_highest Highest measured temperature.
-temp[1-3]_reset_history Reset history. Writing into this attribute will reset
- history for all attributes.
-
-power[1-2]_label "pout[1-2]". LTC3880 only.
-power[1-2]_input Measured power.
-
-curr1_label "iin". LTC3880 only.
-curr1_input Measured input current.
-curr1_max Maximum input current.
-curr1_max_alarm Input current high alarm.
-
-curr[2-3]_label "iout[1-2]". LTC3880 only.
-curr[2-3]_input Measured input current.
-curr[2-3]_max Maximum input current.
-curr[2-3]_crit Critical input current.
-curr[2-3]_max_alarm Input current high alarm.
-curr[2-3]_crit_alarm Input current critical high alarm.