Diffstat (limited to 'Documentation/hwmon/ds620')
1 files changed, 0 insertions, 34 deletions
diff --git a/Documentation/hwmon/ds620 b/Documentation/hwmon/ds620
deleted file mode 100644
@@ -1,34 +0,0 @@
-Kernel driver ds620
- * Dallas Semiconductor DS620
- Prefix: 'ds620'
- Datasheet: Publicly available at the Dallas Semiconductor website
- Roland Stigge <email@example.com>
- based on ds1621.c by
- Christian W. Zuckschwerdt <firstname.lastname@example.org>
-The DS620 is a (one instance) digital thermometer and thermostat. It has both
-high and low temperature limits which can be user defined (i.e. programmed
-into non-volatile on-chip registers). Temperature range is -55 degree Celsius
-to +125. Between 0 and 70 degree Celsius, accuracy is 0.5 Kelvin. The value
-returned via sysfs displays post decimal positions.
-The thermostat function works as follows: When configured via platform_data
-(struct ds620_platform_data) .pomode == 0 (default), the thermostat output pin
-PO is always low. If .pomode == 1, the thermostat is in PO_LOW mode. I.e., the
-output pin PO becomes active when the temperature falls below temp1_min and
-stays active until the temperature goes above temp1_max.
-Likewise, with .pomode == 2, the thermostat is in PO_HIGH mode. I.e., the PO
-output pin becomes active when the temperature goes above temp1_max and stays
-active until the temperature falls below temp1_min.
-The PO output pin of the DS620 operates active-low.