summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/amc6821
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/amc6821')
-rw-r--r--Documentation/hwmon/amc6821102
1 files changed, 0 insertions, 102 deletions
diff --git a/Documentation/hwmon/amc6821 b/Documentation/hwmon/amc6821
deleted file mode 100644
index ced8359..0000000
--- a/Documentation/hwmon/amc6821
+++ /dev/null
@@ -1,102 +0,0 @@
-Kernel driver amc6821
-=====================
-
-Supported chips:
- Texas Instruments AMC6821
- Prefix: 'amc6821'
- Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
- Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
-
-Authors:
- Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
-
-
-Description
------------
-
-This driver implements support for the Texas Instruments amc6821 chip.
-The chip has one on-chip and one remote temperature sensor and one pwm fan
-regulator.
-The pwm can be controlled either from software or automatically.
-
-The driver provides the following sensor accesses in sysfs:
-
-temp1_input ro on-chip temperature
-temp1_min rw "
-temp1_max rw "
-temp1_crit rw "
-temp1_min_alarm ro "
-temp1_max_alarm ro "
-temp1_crit_alarm ro "
-
-temp2_input ro remote temperature
-temp2_min rw "
-temp2_max rw "
-temp2_crit rw "
-temp2_min_alarm ro "
-temp2_max_alarm ro "
-temp2_crit_alarm ro "
-temp2_fault ro "
-
-fan1_input ro tachometer speed
-fan1_min rw "
-fan1_max rw "
-fan1_fault ro "
-fan1_div rw Fan divisor can be either 2 or 4.
-
-pwm1 rw pwm1
-pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
- by remote temperature, 3=fan controlled by
- combination of the on-chip temperature and
- remote-sensor temperature,
-pwm1_auto_channels_temp ro 1 if pwm_enable==2, 3 if pwm_enable==3
-pwm1_auto_point1_pwm ro Hardwired to 0, shared for both
- temperature channels.
-pwm1_auto_point2_pwm rw This value is shared for both temperature
- channels.
-pwm1_auto_point3_pwm rw Hardwired to 255, shared for both
- temperature channels.
-
-temp1_auto_point1_temp ro Hardwired to temp2_auto_point1_temp
- which is rw. Below this temperature fan stops.
-temp1_auto_point2_temp rw The low-temperature limit of the proportional
- range. Below this temperature
- pwm1 = pwm1_auto_point2_pwm. It can go from
- 0 degree C to 124 degree C in steps of
- 4 degree C. Read it out after writing to get
- the actual value.
-temp1_auto_point3_temp rw Above this temperature fan runs at maximum
- speed. It can go from temp1_auto_point2_temp.
- It can only have certain discrete values
- which depend on temp1_auto_point2_temp and
- pwm1_auto_point2_pwm. Read it out after
- writing to get the actual value.
-
-temp2_auto_point1_temp rw Must be between 0 degree C and 63 degree C and
- it defines the passive cooling temperature.
- Below this temperature the fan stops in
- the closed loop mode.
-temp2_auto_point2_temp rw The low-temperature limit of the proportional
- range. Below this temperature
- pwm1 = pwm1_auto_point2_pwm. It can go from
- 0 degree C to 124 degree C in steps
- of 4 degree C.
-
-temp2_auto_point3_temp rw Above this temperature fan runs at maximum
- speed. It can only have certain discrete
- values which depend on temp2_auto_point2_temp
- and pwm1_auto_point2_pwm. Read it out after
- writing to get actual value.
-
-
-Module parameters
------------------
-
-If your board has a BIOS that initializes the amc6821 correctly, you should
-load the module with: init=0.
-
-If your board BIOS doesn't initialize the chip, or you want
-different settings, you can set the following parameters:
-init=1,
-pwminv: 0 default pwm output, 1 inverts pwm output.
-