summaryrefslogtreecommitdiffstats
path: root/Documentation/hwmon/ads1015
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/hwmon/ads1015')
-rw-r--r--Documentation/hwmon/ads101572
1 files changed, 0 insertions, 72 deletions
diff --git a/Documentation/hwmon/ads1015 b/Documentation/hwmon/ads1015
deleted file mode 100644
index f6fe9c2..0000000
--- a/Documentation/hwmon/ads1015
+++ /dev/null
@@ -1,72 +0,0 @@
-Kernel driver ads1015
-=====================
-
-Supported chips:
- * Texas Instruments ADS1015
- Prefix: 'ads1015'
- Datasheet: Publicly available at the Texas Instruments website :
- http://focus.ti.com/lit/ds/symlink/ads1015.pdf
-
-Authors:
- Dirk Eibach, Guntermann & Drunck GmbH <eibach@gdsys.de>
-
-Description
------------
-
-This driver implements support for the Texas Instruments ADS1015.
-
-This device is a 12-bit A-D converter with 4 inputs.
-
-The inputs can be used single ended or in certain differential combinations.
-
-The inputs can be made available by 8 sysfs input files in0_input - in7_input:
-in0: Voltage over AIN0 and AIN1.
-in1: Voltage over AIN0 and AIN3.
-in2: Voltage over AIN1 and AIN3.
-in3: Voltage over AIN2 and AIN3.
-in4: Voltage over AIN0 and GND.
-in5: Voltage over AIN1 and GND.
-in6: Voltage over AIN2 and GND.
-in7: Voltage over AIN3 and GND.
-
-Which inputs are available can be configured using platform data or devicetree.
-
-By default all inputs are exported.
-
-Platform Data
--------------
-
-In linux/i2c/ads1015.h platform data is defined, channel_data contains
-configuration data for the used input combinations:
-- pga is the programmable gain amplifier (values are full scale)
- 0: +/- 6.144 V
- 1: +/- 4.096 V
- 2: +/- 2.048 V
- 3: +/- 1.024 V
- 4: +/- 0.512 V
- 5: +/- 0.256 V
-- data_rate in samples per second
- 0: 128
- 1: 250
- 2: 490
- 3: 920
- 4: 1600
- 5: 2400
- 6: 3300
-
-Example:
-struct ads1015_platform_data data = {
- .channel_data = {
- [2] = { .enabled = true, .pga = 1, .data_rate = 0 },
- [4] = { .enabled = true, .pga = 4, .data_rate = 5 },
- }
-};
-
-In this case only in2_input (FS +/- 4.096 V, 128 SPS) and in4_input
-(FS +/- 0.512 V, 2400 SPS) would be created.
-
-Devicetree
-----------
-
-Configuration is also possible via devicetree:
-Documentation/devicetree/bindings/hwmon/ads1015.txt