1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt b/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
deleted file mode 100644
index e4acdd891e4..00000000000
--- a/Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Freescale i.MX audio complex with SGTL5000 codec
-
-Required properties:
-- compatible : "fsl,imx-audio-sgtl5000"
-- model : The user-visible name of this sound complex
-- ssi-controller : The phandle of the i.MX SSI controller
-- audio-codec : The phandle of the SGTL5000 audio codec
-- audio-routing : A list of the connections between audio components.
-  Each entry is a pair of strings, the first being the connection's sink,
-  the second being the connection's source. Valid names could be power
-  supplies, SGTL5000 pins, and the jacks on the board:
-
-  Power supplies:
-   * Mic Bias
-
-  SGTL5000 pins:
-   * MIC_IN
-   * LINE_IN
-   * HP_OUT
-   * LINE_OUT
-
-  Board connectors:
-   * Mic Jack
-   * Line In Jack
-   * Headphone Jack
-   * Line Out Jack
-   * Ext Spk
-
-- mux-int-port : The internal port of the i.MX audio muxer (AUDMUX)
-- mux-ext-port : The external port of the i.MX audio muxer
-
-Note: The AUDMUX port numbering should start at 1, which is consistent with
-hardware manual.
-
-Example:
-
-sound {
-	compatible = "fsl,imx51-babbage-sgtl5000",
-		     "fsl,imx-audio-sgtl5000";
-	model = "imx51-babbage-sgtl5000";
-	ssi-controller = <&ssi1>;
-	audio-codec = <&sgtl5000>;
-	audio-routing =
-		"MIC_IN", "Mic Jack",
-		"Mic Jack", "Mic Bias",
-		"Headphone Jack", "HP_OUT";
-	mux-int-port = <1>;
-	mux-ext-port = <3>;
-};