summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/serial')
-rw-r--r--Documentation/devicetree/bindings/serial/altera_jtaguart.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/altera_uart.txt7
-rw-r--r--Documentation/devicetree/bindings/serial/mrvl-serial.txt4
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.txt31
-rw-r--r--Documentation/devicetree/bindings/serial/samsung_uart.txt14
6 files changed, 0 insertions, 70 deletions
diff --git a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
deleted file mode 100644
index c152f65f9a2..00000000000
--- a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-Altera JTAG UART
-
-Required properties:
-- compatible : should be "ALTR,juart-1.0"
diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt
deleted file mode 100644
index 71cae3f7010..00000000000
--- a/Documentation/devicetree/bindings/serial/altera_uart.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Altera UART
-
-Required properties:
-- compatible : should be "ALTR,uart-1.0"
-
-Optional properties:
-- clock-frequency : frequency of the clock input to the UART
diff --git a/Documentation/devicetree/bindings/serial/mrvl-serial.txt b/Documentation/devicetree/bindings/serial/mrvl-serial.txt
deleted file mode 100644
index d744340de88..00000000000
--- a/Documentation/devicetree/bindings/serial/mrvl-serial.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-PXA UART controller
-
-Required properties:
-- compatible : should be "mrvl,mmp-uart" or "mrvl,pxa-uart".
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
deleted file mode 100644
index 342eedd1005..00000000000
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-OMAP UART controller
-
-Required properties:
-- compatible : should be "ti,omap2-uart" for OMAP2 controllers
-- compatible : should be "ti,omap3-uart" for OMAP3 controllers
-- compatible : should be "ti,omap4-uart" for OMAP4 controllers
-- ti,hwmods : Must be "uart<n>", n being the instance number (1-based)
-
-Optional properties:
-- clock-frequency : frequency of the clock input to the UART
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
deleted file mode 100644
index 1e753c69fc8..00000000000
--- a/Documentation/devicetree/bindings/serial/rs485.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* RS485 serial communications
-
-The RTS signal is capable of automatically controlling line direction for
-the built-in half-duplex mode.
-The properties described hereafter shall be given to a half-duplex capable
-UART node.
-
-Required properties:
-- rs485-rts-delay: prop-encoded-array <a b> where:
- * a is the delay beteween rts signal and beginning of data sent in milliseconds.
- it corresponds to the delay before sending data.
- * b is the delay between end of data sent and rts signal in milliseconds
- it corresponds to the delay after sending data and actual release of the line.
-
-Optional properties:
-- linux,rs485-enabled-at-boot-time: empty property telling to enable the rs485
- feature at boot time. It can be disabled later with proper ioctl.
-- rs485-rx-during-tx: empty property that enables the receiving of data even
- whilst sending data.
-
-RS485 example for Atmel USART:
- usart0: serial@fff8c000 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0xfff8c000 0x4000>;
- interrupts = <7>;
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- linux,rs485-enabled-at-boot-time;
- rs485-rts-delay = <0 200>; // in milliseconds
- };
-
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
deleted file mode 100644
index 2c8a17cf5cb..00000000000
--- a/Documentation/devicetree/bindings/serial/samsung_uart.txt
+++ /dev/null
@@ -1,14 +0,0 @@
-* Samsung's UART Controller
-
-The Samsung's UART controller is used for interfacing SoC with serial communicaion
-devices.
-
-Required properties:
-- compatible: should be
- - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports.
-
-- reg: base physical address of the controller and length of memory mapped
- region.
-
-- interrupts: interrupt number to the cpu. The interrupt specifier format depends
- on the interrupt controller parent.