1 files changed, 0 insertions, 62 deletions
diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
deleted file mode 100644
index bc67c6f424a..00000000000
--- a/Documentation/devicetree/bindings/mfd/twl6040.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-Texas Instruments TWL6040 family
-
-The TWL6040s are 8-channel high quality low-power audio codecs providing audio
-and vibra functionality on OMAP4+ platforms.
-They are connected ot the host processor via i2c for commands, McPDM for audio
-data and commands.
-
-Required properties:
-- compatible : Must be "ti,twl6040";
-- reg: must be 0x4b for i2c address
-- interrupts: twl6040 has one interrupt line connecteded to the main SoC
-- interrupt-parent: The parent interrupt controller
-- twl6040,audpwron-gpio: Power on GPIO line for the twl6040
-
-- vio-supply: Regulator for the twl6040 VIO supply
-- v2v1-supply: Regulator for the twl6040 V2V1 supply
-
-Optional properties, nodes:
-- enable-active-high: To power on the twl6040 during boot.
-
-Vibra functionality
-Required properties:
-- vddvibl-supply: Regulator for the left vibra motor
-- vddvibr-supply: Regulator for the right vibra motor
-- vibra { }: Configuration section for vibra parameters containing the following
-	     properties:
-- ti,vibldrv-res: Resistance parameter for left driver
-- ti,vibrdrv-res: Resistance parameter for right driver
-- ti,viblmotor-res: Resistance parameter for left motor
-- ti,viblmotor-res: Resistance parameter for right motor
-
-Optional properties within vibra { } section:
-- vddvibl_uV: If the vddvibl default voltage need to be changed
-- vddvibr_uV: If the vddvibr default voltage need to be changed
-
-Example:
-&i2c1 {
-	twl6040: twl@4b {
-		compatible = "ti,twl6040";
-		reg = <0x4b>;
-
-		interrupts = <0 119 4>;
-		interrupt-parent = <&gic>;
-		twl6040,audpwron-gpio = <&gpio4 31 0>;
-
-		vio-supply = <&v1v8>;
-		v2v1-supply = <&v2v1>;
-		enable-active-high;
-
-		/* regulators for vibra motor */
-		vddvibl-supply = <&vbat>;
-		vddvibr-supply = <&vbat>;
-
-		vibra {
-			/* Vibra driver, motor resistance parameters */
-			ti,vibldrv-res = <8>;
-			ti,vibrdrv-res = <3>;
-			ti,viblmotor-res = <10>;
-			ti,vibrmotor-res = <10>;
-		};
-	};
-};