summaryrefslogtreecommitdiffstats
path: root/Documentation/auxdisplay/cfag12864b
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/auxdisplay/cfag12864b')
-rw-r--r--Documentation/auxdisplay/cfag12864b105
1 files changed, 0 insertions, 105 deletions
diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b
deleted file mode 100644
index eb7be39..0000000
--- a/Documentation/auxdisplay/cfag12864b
+++ /dev/null
@@ -1,105 +0,0 @@
- ===================================
- cfag12864b LCD Driver Documentation
- ===================================
-
-License: GPLv2
-Author & Maintainer: Miguel Ojeda Sandonis
-Date: 2006-10-27
-
-
-
---------
-0. INDEX
---------
-
- 1. DRIVER INFORMATION
- 2. DEVICE INFORMATION
- 3. WIRING
- 4. USERSPACE PROGRAMMING
-
-
----------------------
-1. DRIVER INFORMATION
----------------------
-
-This driver supports a cfag12864b LCD.
-
-
----------------------
-2. DEVICE INFORMATION
----------------------
-
-Manufacturer: Crystalfontz
-Device Name: Crystalfontz 12864b LCD Series
-Device Code: cfag12864b
-Webpage: http://www.crystalfontz.com
-Device Webpage: http://www.crystalfontz.com/products/12864b/
-Type: LCD (Liquid Crystal Display)
-Width: 128
-Height: 64
-Colors: 2 (B/N)
-Controller: ks0108
-Controllers: 2
-Pages: 8 each controller
-Addresses: 64 each page
-Data size: 1 byte each address
-Memory size: 2 * 8 * 64 * 1 = 1024 bytes = 1 Kbyte
-
-
----------
-3. WIRING
----------
-
-The cfag12864b LCD Series don't have official wiring.
-
-The common wiring is done to the parallel port as shown:
-
-Parallel Port cfag12864b
-
- Name Pin# Pin# Name
-
-Strobe ( 1)------------------------------(17) Enable
-Data 0 ( 2)------------------------------( 4) Data 0
-Data 1 ( 3)------------------------------( 5) Data 1
-Data 2 ( 4)------------------------------( 6) Data 2
-Data 3 ( 5)------------------------------( 7) Data 3
-Data 4 ( 6)------------------------------( 8) Data 4
-Data 5 ( 7)------------------------------( 9) Data 5
-Data 6 ( 8)------------------------------(10) Data 6
-Data 7 ( 9)------------------------------(11) Data 7
- (10) [+5v]---( 1) Vdd
- (11) [GND]---( 2) Ground
- (12) [+5v]---(14) Reset
- (13) [GND]---(15) Read / Write
- Line (14)------------------------------(13) Controller Select 1
- (15)
- Init (16)------------------------------(12) Controller Select 2
-Select (17)------------------------------(16) Data / Instruction
-Ground (18)---[GND] [+5v]---(19) LED +
-Ground (19)---[GND]
-Ground (20)---[GND] E A Values:
-Ground (21)---[GND] [GND]---[P1]---(18) Vee - R = Resistor = 22 ohm
-Ground (22)---[GND] | - P1 = Preset = 10 Kohm
-Ground (23)---[GND] ---- S ------( 3) V0 - P2 = Preset = 1 Kohm
-Ground (24)---[GND] | |
-Ground (25)---[GND] [GND]---[P2]---[R]---(20) LED -
-
-
-------------------------
-4. USERSPACE PROGRAMMING
-------------------------
-
-The cfag12864bfb describes a framebuffer device (/dev/fbX).
-
-It has a size of 1024 bytes = 1 Kbyte.
-Each bit represents one pixel. If the bit is high, the pixel will
-turn on. If the pixel is low, the pixel will turn off.
-
-You can use the framebuffer as a file: fopen, fwrite, fclose...
-Although the LCD won't get updated until the next refresh time arrives.
-
-Also, you can mmap the framebuffer: open & mmap, munmap & close...
-which is the best option for most uses.
-
-Check Documentation/auxdisplay/cfag12864b-example.c
-for a real working userspace complete program with usage examples.