Diffstat (limited to 'Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt')
1 files changed, 0 insertions, 29 deletions
diff --git a/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt b/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt
deleted file mode 100644
@@ -1,29 +0,0 @@
-ROM-able zImage boot from MMC
-An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
-SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
-This is achieved by the mask ROM loading the first portion of the image into
-MERAM and then jumping to it. This portion contains loader code which
-copies the entire image to SDRAM and jumps to it. From there the zImage
-boot code proceeds as normal, uncompressing the image into its final
-location and then jumping to it.
-This code has been tested on an AP4EB board using the developer 1A eMMC
-boot mode which is configured using the following jumper settings.
-The board used for testing required a patched mask ROM in order for
-this mode to function.
- 8 7 6 5 4 3 2 1
- x|x|x|x|x| |x|
- | | | | |x| |x on
-The zImage must be written to the MMC card at sector 1 (512 bytes) in
-vrl4 format. A utility vrl4 is supplied to accomplish this.
- vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
-A dual-voltage MMC 4.0 card was used for testing.