summaryrefslogtreecommitdiffstats
path: root/Documentation/arm/SA1100/GraphicsMaster
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/arm/SA1100/GraphicsMaster')
-rw-r--r--Documentation/arm/SA1100/GraphicsMaster53
1 files changed, 0 insertions, 53 deletions
diff --git a/Documentation/arm/SA1100/GraphicsMaster b/Documentation/arm/SA1100/GraphicsMaster
deleted file mode 100644
index 9145088..0000000
--- a/Documentation/arm/SA1100/GraphicsMaster
+++ /dev/null
@@ -1,53 +0,0 @@
-ADS GraphicsMaster Single Board Computer
-
-For more details, contact Applied Data Systems or see
-http://www.applieddata.net/products.html
-
-The original Linux support for this product has been provided by
-Nicolas Pitre <nico@fluxnic.net>. Continued development work by
-Woojung Huh <whuh@applieddata.net>
-
-Use 'make graphicsmaster_config' before any 'make config'.
-This will set up defaults for GraphicsMaster support.
-
-The kernel zImage is linked to be loaded and executed at 0xc0400000.
-
-Linux can be used with the ADS BootLoader that ships with the
-newer rev boards. See their documentation on how to load Linux.
-
-Supported peripherals:
-- SA1100 LCD frame buffer (8/16bpp...sort of)
-- SA1111 USB Master
-- on-board SMC 92C96 ethernet NIC
-- SA1100 serial port
-- flash memory access (MTD/JFFS)
-- pcmcia, compact flash
-- touchscreen(ucb1200)
-- ps/2 keyboard
-- console on LCD screen
-- serial ports (ttyS[0-2])
- - ttyS0 is default for serial console
-- Smart I/O (ADC, keypad, digital inputs, etc)
- See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation
- and example user space code. ps/2 keybd is multiplexed through this driver
-
-To do:
-- everything else! :-)
-
-Notes:
-
-- The flash on board is divided into 3 partitions. mtd0 is where
- the zImage is stored. It's been marked as read-only to keep you
- from blasting over the bootloader. :) mtd1 is
- for the ramdisk.gz image. mtd2 is user flash space and can be
- utilized for either JFFS or if you're feeling crazy, running ext2
- on top of it. If you're not using the ADS bootloader, you're
- welcome to blast over the mtd1 partition also.
-
-- 16bpp mode requires a different cable than what ships with the board.
- Contact ADS or look through the manual to wire your own. Currently,
- if you compile with 16bit mode support and switch into a lower bpp
- mode, the timing is off so the image is corrupted. This will be
- fixed soon.
-
-Any contribution can be sent to nico@fluxnic.net and will be greatly welcome!