diff options
Diffstat (limited to 'Documentation/arm/SA1100/CERF')
| -rw-r--r-- | Documentation/arm/SA1100/CERF | 29 |
1 files changed, 0 insertions, 29 deletions
diff --git a/Documentation/arm/SA1100/CERF b/Documentation/arm/SA1100/CERF deleted file mode 100644 index b3d845301ef..00000000000 --- a/Documentation/arm/SA1100/CERF +++ /dev/null @@ -1,29 +0,0 @@ -*** The StrongARM version of the CerfBoard/Cube has been discontinued *** - -The Intrinsyc CerfBoard is a StrongARM 1110-based computer on a board -that measures approximately 2" square. It includes an Ethernet -controller, an RS232-compatible serial port, a USB function port, and -one CompactFlash+ slot on the back. Pictures can be found at the -Intrinsyc website, http://www.intrinsyc.com. - -This document describes the support in the Linux kernel for the -Intrinsyc CerfBoard. - -Supported in this version: - - CompactFlash+ slot (select PCMCIA in General Setup and any options - that may be required) - - Onboard Crystal CS8900 Ethernet controller (Cerf CS8900A support in - Network Devices) - - Serial ports with a serial console (hardcoded to 38400 8N1) - -In order to get this kernel onto your Cerf, you need a server that runs -both BOOTP and TFTP. Detailed instructions should have come with your -evaluation kit on how to use the bootloader. This series of commands -will suffice: - - make ARCH=arm CROSS_COMPILE=arm-linux- cerfcube_defconfig - make ARCH=arm CROSS_COMPILE=arm-linux- zImage - make ARCH=arm CROSS_COMPILE=arm-linux- modules - cp arch/arm/boot/zImage <TFTP directory> - -support@intrinsyc.com |