fedora kernel: cd394142aac30b5c751f25b517572e2448695641v3.6.3-2f17

Signed-off-by: Anton Arapov <anton@redhat.com>

1 files changed, 229 insertions, 0 deletions

diff --git a/arch/tile/include/arch/trio_pcie_intfc.h b/arch/tile/include/arch/trio_pcie_intfc.h
new file mode 100644
index 00000000000..0487fdb9d58
--- /dev/null
+++ b/arch/tile/include/arch/trio_pcie_intfc.h
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/* Machine-generated file; do not edit. */
+
+#ifndef __ARCH_TRIO_PCIE_INTFC_H__
+#define __ARCH_TRIO_PCIE_INTFC_H__
+
+#include <arch/abi.h>
+#include <arch/trio_pcie_intfc_def.h>
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Port Configuration.
+ * Configuration of the PCIe Port
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /* Provides the state of the strapping pins for this port. */
+    uint_reg_t strap_state      : 3;
+    /* Reserved. */
+    uint_reg_t __reserved_0     : 1;
+    /*
+     * When 1, the device type will be overridden using OVD_DEV_TYPE_VAL.
+     * When 0, the device type is determined based on the STRAP_STATE.
+     */
+    uint_reg_t ovd_dev_type     : 1;
+    /* Provides the device type when OVD_DEV_TYPE is 1. */
+    uint_reg_t ovd_dev_type_val : 4;
+    /* Determines how link is trained. */
+    uint_reg_t train_mode       : 2;
+    /* Reserved. */
+    uint_reg_t __reserved_1     : 1;
+    /*
+     * For PCIe, used to flip physical RX lanes that were not properly wired.
+     *  This is not the same as lane reversal which is handled automatically
+     * during link training.  When 0, RX Lane0 must be wired to the link
+     * partner (either to its Lane0 or it's LaneN).  When RX_LANE_FLIP is 1,
+     * the highest numbered lane for this port becomes Lane0 and Lane0 does
+     * NOT have to be wired to the link partner.
+     */
+    uint_reg_t rx_lane_flip     : 1;
+    /*
+     * For PCIe, used to flip physical TX lanes that were not properly wired.
+     *  This is not the same as lane reversal which is handled automatically
+     * during link training.  When 0, TX Lane0 must be wired to the link
+     * partner (either to its Lane0 or it's LaneN).  When TX_LANE_FLIP is 1,
+     * the highest numbered lane for this port becomes Lane0 and Lane0 does
+     * NOT have to be wired to the link partner.
+     */
+    uint_reg_t tx_lane_flip     : 1;
+    /*
+     * For StreamIO port, configures the width of the port when TRAIN_MODE is
+     * not STRAP.
+     */
+    uint_reg_t stream_width     : 2;
+    /*
+     * For StreamIO port, configures the rate of the port when TRAIN_MODE is
+     * not STRAP.
+     */
+    uint_reg_t stream_rate      : 2;
+    /* Reserved. */
+    uint_reg_t __reserved_2     : 46;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_2     : 46;
+    uint_reg_t stream_rate      : 2;
+    uint_reg_t stream_width     : 2;
+    uint_reg_t tx_lane_flip     : 1;
+    uint_reg_t rx_lane_flip     : 1;
+    uint_reg_t __reserved_1     : 1;
+    uint_reg_t train_mode       : 2;
+    uint_reg_t ovd_dev_type_val : 4;
+    uint_reg_t ovd_dev_type     : 1;
+    uint_reg_t __reserved_0     : 1;
+    uint_reg_t strap_state      : 3;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_INTFC_PORT_CONFIG_t;
+
+/*
+ * Port Status.
+ * Status of the PCIe Port.  This register applies to the StreamIO port when
+ * StreamIO is enabled.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * Indicates the DL state of the port.  When 1, the port is up and ready
+     * to receive traffic.
+     */
+    uint_reg_t dl_up        : 1;
+    /*
+     * Indicates the number of times the link has gone down.  Clears on read.
+     */
+    uint_reg_t dl_down_cnt  : 7;
+    /* Indicates the SERDES PLL has spun up and is providing a valid clock. */
+    uint_reg_t clock_ready  : 1;
+    /* Reserved. */
+    uint_reg_t __reserved_0 : 7;
+    /* Device revision ID. */
+    uint_reg_t device_rev   : 8;
+    /* Link state (PCIe). */
+    uint_reg_t ltssm_state  : 6;
+    /* Link power management state (PCIe). */
+    uint_reg_t pm_state     : 3;
+    /* Reserved. */
+    uint_reg_t __reserved_1 : 31;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t __reserved_1 : 31;
+    uint_reg_t pm_state     : 3;
+    uint_reg_t ltssm_state  : 6;
+    uint_reg_t device_rev   : 8;
+    uint_reg_t __reserved_0 : 7;
+    uint_reg_t clock_ready  : 1;
+    uint_reg_t dl_down_cnt  : 7;
+    uint_reg_t dl_up        : 1;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_INTFC_PORT_STATUS_t;
+
+/*
+ * Transmit FIFO Control.
+ * Contains TX FIFO thresholds.  These registers are for diagnostics purposes
+ * only.  Changing these values causes undefined behavior.
+ */
+
+__extension__
+typedef union
+{
+  struct
+  {
+#ifndef __BIG_ENDIAN__
+    /*
+     * Almost-Empty level for TX0 data.  Typically set to at least
+     * roundup(38.0*M/N) where N=tclk frequency and M=MAC symbol rate in MHz
+     * for a x4 port (250MHz).
+     */
+    uint_reg_t tx0_data_ae_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_0    : 1;
+    /* Almost-Empty level for TX1 data. */
+    uint_reg_t tx1_data_ae_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_1    : 1;
+    /* Almost-Full level for TX0 data. */
+    uint_reg_t tx0_data_af_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_2    : 1;
+    /* Almost-Full level for TX1 data. */
+    uint_reg_t tx1_data_af_lvl : 7;
+    /* Reserved. */
+    uint_reg_t __reserved_3    : 1;
+    /* Almost-Full level for TX0 info. */
+    uint_reg_t tx0_info_af_lvl : 5;
+    /* Reserved. */
+    uint_reg_t __reserved_4    : 3;
+    /* Almost-Full level for TX1 info. */
+    uint_reg_t tx1_info_af_lvl : 5;
+    /* Reserved. */
+    uint_reg_t __reserved_5    : 3;
+    /*
+     * This register provides performance adjustment for high bandwidth
+     * flows.  The MAC will assert almost-full to TRIO if non-posted credits
+     * fall below this level.  Note that setting this larger than the initial
+     * PORT_CREDIT.NPH value will cause READS to never be sent.  If the
+     * initial credit value from the link partner is smaller than this value
+     * when the link comes up, the value will be reset to the initial credit
+     * value to prevent lockup.
+     */
+    uint_reg_t min_np_credits  : 8;
+    /*
+     * This register provides performance adjustment for high bandwidth
+     * flows.  The MAC will assert almost-full to TRIO if posted credits fall
+     * below this level.  Note that setting this larger than the initial
+     * PORT_CREDIT.PH value will cause WRITES to never be sent.  If the
+     * initial credit value from the link partner is smaller than this value
+     * when the link comes up, the value will be reset to the initial credit
+     * value to prevent lockup.
+     */
+    uint_reg_t min_p_credits   : 8;
+#else   /* __BIG_ENDIAN__ */
+    uint_reg_t min_p_credits   : 8;
+    uint_reg_t min_np_credits  : 8;
+    uint_reg_t __reserved_5    : 3;
+    uint_reg_t tx1_info_af_lvl : 5;
+    uint_reg_t __reserved_4    : 3;
+    uint_reg_t tx0_info_af_lvl : 5;
+    uint_reg_t __reserved_3    : 1;
+    uint_reg_t tx1_data_af_lvl : 7;
+    uint_reg_t __reserved_2    : 1;
+    uint_reg_t tx0_data_af_lvl : 7;
+    uint_reg_t __reserved_1    : 1;
+    uint_reg_t tx1_data_ae_lvl : 7;
+    uint_reg_t __reserved_0    : 1;
+    uint_reg_t tx0_data_ae_lvl : 7;
+#endif
+  };
+
+  uint_reg_t word;
+} TRIO_PCIE_INTFC_TX_FIFO_CTL_t;
+#endif /* !defined(__ASSEMBLER__) */
+
+#endif /* !defined(__ARCH_TRIO_PCIE_INTFC_H__) */