summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/85xx/ge_imp3a.c
diff options
context:
space:
mode:
authorAnton Arapov <anton@redhat.com>2012-06-08 12:58:00 +0200
committerAnton Arapov <anton@redhat.com>2012-06-08 12:58:00 +0200
commit6792a3f47a2e42d7164292bf7f1a55cfc4c91652 (patch)
treeb90c002bfbbeaec92f5d8a2383dcabf6524016f7 /arch/powerpc/platforms/85xx/ge_imp3a.c
parentfe2895d3d55146cac65b273c0f83e2c7e543cd0e (diff)
downloadkernel-uprobes-6792a3f47a2e42d7164292bf7f1a55cfc4c91652.tar.gz
kernel-uprobes-6792a3f47a2e42d7164292bf7f1a55cfc4c91652.tar.xz
kernel-uprobes-6792a3f47a2e42d7164292bf7f1a55cfc4c91652.zip
fedora kernel: b920e9b748c595f970bf80ede7832d39f8d567dav3.4.1-2
Signed-off-by: Anton Arapov <anton@redhat.com>
Diffstat (limited to 'arch/powerpc/platforms/85xx/ge_imp3a.c')
-rw-r--r--arch/powerpc/platforms/85xx/ge_imp3a.c245
1 files changed, 245 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c
new file mode 100644
index 00000000000..18014629416
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/ge_imp3a.c
@@ -0,0 +1,245 @@
+/*
+ * GE IMP3A Board Setup
+ *
+ * Author Martyn Welch <martyn.welch@ge.com>
+ *
+ * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup)
+ * Copyright 2007 Freescale Semiconductor Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/memblock.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+#include <asm/nvram.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+#include <sysdev/ge/ge_pic.h>
+
+void __iomem *imp3a_regs;
+
+void __init ge_imp3a_pic_init(void)
+{
+ struct mpic *mpic;
+ struct device_node *np;
+ struct device_node *cascade_node = NULL;
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) {
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_NO_RESET |
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ } else {
+ mpic = mpic_alloc(NULL, 0,
+ MPIC_BIG_ENDIAN |
+ MPIC_SINGLE_DEST_CPU,
+ 0, 256, " OpenPIC ");
+ }
+
+ BUG_ON(mpic == NULL);
+ mpic_init(mpic);
+ /*
+ * There is a simple interrupt handler in the main FPGA, this needs
+ * to be cascaded into the MPIC
+ */
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) {
+ cascade_node = np;
+ break;
+ }
+
+ if (cascade_node == NULL) {
+ printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
+ return;
+ }
+
+ gef_pic_init(cascade_node);
+ of_node_put(cascade_node);
+}
+
+#ifdef CONFIG_PCI
+static int primary_phb_addr;
+#endif /* CONFIG_PCI */
+
+/*
+ * Setup the architecture
+ */
+static void __init ge_imp3a_setup_arch(void)
+{
+ struct device_node *regs;
+#ifdef CONFIG_PCI
+ struct device_node *np;
+ struct pci_controller *hose;
+#endif
+ dma_addr_t max = 0xffffffff;
+
+ if (ppc_md.progress)
+ ppc_md.progress("ge_imp3a_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_node_by_type(np, "pci") {
+ if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+ of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+ of_device_is_compatible(np, "fsl,p2020-pcie")) {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == primary_phb_addr)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+
+ hose = pci_find_hose_for_OF_device(np);
+ max = min(max, hose->dma_window_base_cur +
+ hose->dma_window_size);
+ }
+ }
+#endif
+
+ mpc85xx_smp_init();
+
+#ifdef CONFIG_SWIOTLB
+ if (memblock_end_of_DRAM() > max) {
+ ppc_swiotlb_enable = 1;
+ set_pci_dma_ops(&swiotlb_dma_ops);
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+ }
+#endif
+
+ /* Remap basic board registers */
+ regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs");
+ if (regs) {
+ imp3a_regs = of_iomap(regs, 0);
+ if (imp3a_regs == NULL)
+ printk(KERN_WARNING "Unable to map board registers\n");
+ of_node_put(regs);
+ }
+
+#if defined(CONFIG_MMIO_NVRAM)
+ mmio_nvram_init();
+#endif
+
+ printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
+}
+
+/* Return the PCB revision */
+static unsigned int ge_imp3a_get_pcb_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return the board (software) revision */
+static unsigned int ge_imp3a_get_board_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x2);
+ return reg & 0xff;
+}
+
+/* Return the FPGA revision */
+static unsigned int ge_imp3a_get_fpga_rev(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x2);
+ return (reg >> 8) & 0xff;
+}
+
+/* Return compactPCI Geographical Address */
+static unsigned int ge_imp3a_get_cpci_geo_addr(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x6);
+ return (reg & 0x0f00) >> 8;
+}
+
+/* Return compactPCI System Controller Status */
+static unsigned int ge_imp3a_get_cpci_is_syscon(void)
+{
+ unsigned int reg;
+
+ reg = ioread16(imp3a_regs + 0x6);
+ return reg & (1 << 12);
+}
+
+static void ge_imp3a_show_cpuinfo(struct seq_file *m)
+{
+ seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n");
+
+ seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(),
+ ('A' + ge_imp3a_get_board_rev() - 1));
+
+ seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev());
+
+ seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr());
+
+ seq_printf(m, "cPCI syscon\t: %s\n",
+ ge_imp3a_get_cpci_is_syscon() ? "yes" : "no");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ge_imp3a_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "ge,IMP3A")) {
+#ifdef CONFIG_PCI
+ primary_phb_addr = 0x9000;
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices);
+
+machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier);
+
+define_machine(ge_imp3a) {
+ .name = "GE_IMP3A",
+ .probe = ge_imp3a_probe,
+ .setup_arch = ge_imp3a_setup_arch,
+ .init_IRQ = ge_imp3a_pic_init,
+ .show_cpuinfo = ge_imp3a_show_cpuinfo,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};