summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
authorAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
committerAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
commitb4b6116a13633898cf868f2f103c96a90c4c20f8 (patch)
tree93d1b7e2cfcdf473d8d4ff3ad141fa864f8491f6 /arch/arm/mach-ux500
parentedd4be777c953e5faafc80d091d3084b4343f5d3 (diff)
downloadkernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.gz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.xz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.zip
fedora kernel: d9aad82f3319f3cfd1aebc01234254ef0c37ad84v3.3.2-1
Signed-off-by: Anton Arapov <anton@redhat.com>
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/Kconfig75
-rw-r--r--arch/arm/mach-ux500/Makefile21
-rw-r--r--arch/arm/mach-ux500/Makefile.boot4
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c304
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.c366
-rw-r--r--arch/arm/mach-ux500/board-mop500-regulators.h22
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c289
-rw-r--r--arch/arm/mach-ux500/board-mop500-stuib.c205
-rw-r--r--arch/arm/mach-ux500/board-mop500-u8500uib.c90
-rw-r--r--arch/arm/mach-ux500/board-mop500-uib.c135
-rw-r--r--arch/arm/mach-ux500/board-mop500.c720
-rw-r--r--arch/arm/mach-ux500/board-mop500.h91
-rw-r--r--arch/arm/mach-ux500/board-u5500-sdi.c74
-rw-r--r--arch/arm/mach-ux500/board-u5500.c155
-rw-r--r--arch/arm/mach-ux500/cache-l2x0.c61
-rw-r--r--arch/arm/mach-ux500/clock.c716
-rw-r--r--arch/arm/mach-ux500/clock.h151
-rw-r--r--arch/arm/mach-ux500/cpu-db5500.c225
-rw-r--r--arch/arm/mach-ux500/cpu-db8500.c180
-rw-r--r--arch/arm/mach-ux500/cpu.c52
-rw-r--r--arch/arm/mach-ux500/devices-common.c146
-rw-r--r--arch/arm/mach-ux500/devices-common.h87
-rw-r--r--arch/arm/mach-ux500/devices-db5500.h79
-rw-r--r--arch/arm/mach-ux500/devices-db8500.c187
-rw-r--r--arch/arm/mach-ux500/devices-db8500.h101
-rw-r--r--arch/arm/mach-ux500/devices.c25
-rw-r--r--arch/arm/mach-ux500/dma-db5500.c136
-rw-r--r--arch/arm/mach-ux500/headsmp.S39
-rw-r--r--arch/arm/mach-ux500/hotplug.c60
-rw-r--r--arch/arm/mach-ux500/id.c109
-rw-r--r--arch/arm/mach-ux500/include/mach/db5500-regs.h143
-rw-r--r--arch/arm/mach-ux500/include/mach/db8500-regs.h164
-rw-r--r--arch/arm/mach-ux500/include/mach/debug-macro.S43
-rw-r--r--arch/arm/mach-ux500/include/mach/devices.h21
-rw-r--r--arch/arm/mach-ux500/include/mach/entry-macro.S18
-rw-r--r--arch/arm/mach-ux500/include/mach/gpio.h5
-rw-r--r--arch/arm/mach-ux500/include/mach/hardware.h41
-rw-r--r--arch/arm/mach-ux500/include/mach/id.h124
-rw-r--r--arch/arm/mach-ux500/include/mach/io.h22
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-mop500.h63
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-board-u5500.h21
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-db5500.h113
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs-db8500.h150
-rw-r--r--arch/arm/mach-ux500/include/mach/irqs.h56
-rw-r--r--arch/arm/mach-ux500/include/mach/mbox-db5500.h88
-rw-r--r--arch/arm/mach-ux500/include/mach/setup.h53
-rw-r--r--arch/arm/mach-ux500/include/mach/system.h20
-rw-r--r--arch/arm/mach-ux500/include/mach/timex.h6
-rw-r--r--arch/arm/mach-ux500/include/mach/uncompress.h62
-rw-r--r--arch/arm/mach-ux500/include/mach/usb.h25
-rw-r--r--arch/arm/mach-ux500/localtimer.c29
-rw-r--r--arch/arm/mach-ux500/mbox-db5500.c565
-rw-r--r--arch/arm/mach-ux500/modem-irq-db5500.c143
-rw-r--r--arch/arm/mach-ux500/pins-db5500.h620
-rw-r--r--arch/arm/mach-ux500/pins-db8500.h746
-rw-r--r--arch/arm/mach-ux500/platsmp.c177
-rw-r--r--arch/arm/mach-ux500/ste-dma40-db5500.h135
-rw-r--r--arch/arm/mach-ux500/ste-dma40-db8500.h144
-rw-r--r--arch/arm/mach-ux500/timer.c68
-rw-r--r--arch/arm/mach-ux500/usb.c155
60 files changed, 8925 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 00000000000..c59e8b892d6
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,75 @@
+if ARCH_U8500
+
+config UX500_SOC_COMMON
+ bool
+ default y
+ select ARM_GIC
+ select HAS_MTU
+ select PL310_ERRATA_753970
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_764369
+
+menu "Ux500 SoC"
+
+config UX500_SOC_DB5500
+ bool "DB5500"
+ select MFD_DB5500_PRCMU
+
+config UX500_SOC_DB8500
+ bool "DB8500"
+ select MFD_DB8500_PRCMU
+ select REGULATOR_DB8500_PRCMU
+
+endmenu
+
+menu "Ux500 target platform (boards)"
+
+config MACH_U8500
+ bool "U8500 Development platform"
+ depends on UX500_SOC_DB8500
+ select TPS6105X
+ help
+ Include support for the mop500 development platform.
+
+config MACH_HREFV60
+ bool "U85000 Development platform, HREFv60 version"
+ depends on UX500_SOC_DB8500
+ help
+ Include support for the HREFv60 new development platform.
+
+config MACH_SNOWBALL
+ bool "U8500 Snowball platform"
+ depends on UX500_SOC_DB8500
+ select MACH_U8500
+ help
+ Include support for the snowball development platform.
+
+config MACH_U5500
+ bool "U5500 Development platform"
+ depends on UX500_SOC_DB5500
+ help
+ Include support for the U5500 development platform.
+endmenu
+
+config UX500_DEBUG_UART
+ int "Ux500 UART to use for low-level debug"
+ default 2
+ help
+ Choose the UART on which kernel low-level debug messages should be
+ output.
+
+config U5500_MODEM_IRQ
+ bool "Modem IRQ support"
+ depends on UX500_SOC_DB5500
+ default y
+ help
+ Add support for handling IRQ:s from modem side
+
+config U5500_MBOX
+ bool "Mailbox support"
+ depends on U5500_MODEM_IRQ
+ default y
+ help
+ Add support for U5500 mailbox communication with modem side
+
+endif
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 00000000000..6bd2f451c18
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,21 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+
+obj-y := clock.o cpu.o devices.o devices-common.o \
+ id.o usb.o timer.o
+obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
+obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o
+obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \
+ board-mop500-regulators.o \
+ board-mop500-uib.o board-mop500-stuib.o \
+ board-mop500-u8500uib.o \
+ board-mop500-pins.o
+obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
+obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o
+obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o
+
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 00000000000..ff0a4b5b0a8
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y += 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x00800000
+
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
new file mode 100644
index 00000000000..74bfcff2bdf
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
+#include <mach/hardware.h>
+
+#include "pins-db8500.h"
+
+static pin_cfg_t mop500_pins_common[] = {
+ /* I2C */
+ GPIO147_I2C0_SCL,
+ GPIO148_I2C0_SDA,
+ GPIO16_I2C1_SCL,
+ GPIO17_I2C1_SDA,
+ GPIO10_I2C2_SDA,
+ GPIO11_I2C2_SCL,
+ GPIO229_I2C3_SDA,
+ GPIO230_I2C3_SCL,
+
+ /* MSP0 */
+ GPIO12_MSP0_TXD,
+ GPIO13_MSP0_TFS,
+ GPIO14_MSP0_TCK,
+ GPIO15_MSP0_RXD,
+
+ /* MSP2: HDMI */
+ GPIO193_MSP2_TXD,
+ GPIO194_MSP2_TCK,
+ GPIO195_MSP2_TFS,
+ GPIO196_MSP2_RXD | PIN_OUTPUT_LOW,
+
+ /* Touch screen INTERFACE */
+ GPIO84_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT1 */
+
+ /* STMPE1601/tc35893 keypad IRQ */
+ GPIO218_GPIO | PIN_INPUT_PULLUP,
+
+ /* MMC0 (MicroSD card) */
+ GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH,
+ GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH,
+ GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH,
+
+ GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL,
+ GPIO23_MC0_CLK | PIN_OUTPUT_LOW,
+ GPIO24_MC0_CMD | PIN_INPUT_PULLUP,
+ GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP,
+ GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP,
+ GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP,
+ GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP,
+
+ /* SDI1 (SDIO) */
+ GPIO208_MC1_CLK | PIN_OUTPUT_LOW,
+ GPIO209_MC1_FBCLK | PIN_INPUT_NOPULL,
+ GPIO210_MC1_CMD | PIN_INPUT_PULLUP,
+ GPIO211_MC1_DAT0 | PIN_INPUT_PULLUP,
+ GPIO212_MC1_DAT1 | PIN_INPUT_PULLUP,
+ GPIO213_MC1_DAT2 | PIN_INPUT_PULLUP,
+ GPIO214_MC1_DAT3 | PIN_INPUT_PULLUP,
+
+ /* MMC2 (On-board DATA INTERFACE eMMC) */
+ GPIO128_MC2_CLK | PIN_OUTPUT_LOW,
+ GPIO129_MC2_CMD | PIN_INPUT_PULLUP,
+ GPIO130_MC2_FBCLK | PIN_INPUT_NOPULL,
+ GPIO131_MC2_DAT0 | PIN_INPUT_PULLUP,
+ GPIO132_MC2_DAT1 | PIN_INPUT_PULLUP,
+ GPIO133_MC2_DAT2 | PIN_INPUT_PULLUP,
+ GPIO134_MC2_DAT3 | PIN_INPUT_PULLUP,
+ GPIO135_MC2_DAT4 | PIN_INPUT_PULLUP,
+ GPIO136_MC2_DAT5 | PIN_INPUT_PULLUP,
+ GPIO137_MC2_DAT6 | PIN_INPUT_PULLUP,
+ GPIO138_MC2_DAT7 | PIN_INPUT_PULLUP,
+
+ /* MMC4 (On-board STORAGE INTERFACE eMMC) */
+ GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP,
+ GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP,
+ GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP,
+ GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP,
+ GPIO201_MC4_CMD | PIN_INPUT_PULLUP,
+ GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL,
+ GPIO203_MC4_CLK | PIN_OUTPUT_LOW,
+ GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP,
+ GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP,
+ GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP,
+ GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP,
+
+ /* SKE keypad */
+ GPIO153_KP_I7,
+ GPIO154_KP_I6,
+ GPIO155_KP_I5,
+ GPIO156_KP_I4,
+ GPIO157_KP_O7,
+ GPIO158_KP_O6,
+ GPIO159_KP_O5,
+ GPIO160_KP_O4,
+ GPIO161_KP_I3,
+ GPIO162_KP_I2,
+ GPIO163_KP_I1,
+ GPIO164_KP_I0,
+ GPIO165_KP_O3,
+ GPIO166_KP_O2,
+ GPIO167_KP_O1,
+ GPIO168_KP_O0,
+
+ /* UART */
+ /* uart-0 pins gpio configuration should be
+ * kept intact to prevent glitch in tx line
+ * when tty dev is opened. Later these pins
+ * are configured to uart mop500_pins_uart0
+ *
+ * It will be replaced with uart configuration
+ * once the issue is solved.
+ */
+ GPIO0_GPIO | PIN_INPUT_PULLUP,
+ GPIO1_GPIO | PIN_OUTPUT_HIGH,
+ GPIO2_GPIO | PIN_INPUT_PULLUP,
+ GPIO3_GPIO | PIN_OUTPUT_HIGH,
+
+ GPIO29_U2_RXD | PIN_INPUT_PULLUP,
+ GPIO30_U2_TXD | PIN_OUTPUT_HIGH,
+ GPIO31_U2_CTSn | PIN_INPUT_PULLUP,
+ GPIO32_U2_RTSn | PIN_OUTPUT_HIGH,
+
+ /* Display & HDMI HW sync */
+ GPIO68_LCD_VSI0 | PIN_INPUT_PULLUP,
+ GPIO69_LCD_VSI1 | PIN_INPUT_PULLUP,
+};
+
+static pin_cfg_t mop500_pins_default[] = {
+ /* SSP0 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+ GPIO146_SSP0_TXD,
+
+
+ GPIO217_GPIO | PIN_INPUT_PULLUP, /* TC35892 IRQ */
+
+ /* SDI0 (MicroSD card) */
+ GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
+
+ /* UART */
+ GPIO4_U1_RXD | PIN_INPUT_PULLUP,
+ GPIO5_U1_TXD | PIN_OUTPUT_HIGH,
+ GPIO6_U1_CTSn | PIN_INPUT_PULLUP,
+ GPIO7_U1_RTSn | PIN_OUTPUT_HIGH,
+};
+
+static pin_cfg_t hrefv60_pins[] = {
+ /* WLAN */
+ GPIO4_GPIO | PIN_INPUT_PULLUP,/* WLAN_IRQ */
+ GPIO85_GPIO | PIN_OUTPUT_LOW,/* WLAN_ENA */
+
+ /* XENON Flashgun INTERFACE */
+ GPIO6_IP_GPIO0 | PIN_INPUT_PULLUP,/* XENON_FLASH_ID */
+ GPIO7_IP_GPIO1 | PIN_INPUT_PULLUP,/* XENON_READY */
+ GPIO170_GPIO | PIN_OUTPUT_LOW, /* XENON_CHARGE */
+
+ /* Assistant LED INTERFACE */
+ GPIO21_GPIO | PIN_OUTPUT_LOW, /* XENON_EN1 */
+ GPIO64_IP_GPIO4 | PIN_OUTPUT_LOW, /* XENON_EN2 */
+
+ /* Magnetometer */
+ GPIO31_GPIO | PIN_INPUT_PULLUP, /* magnetometer_INT */
+ GPIO32_GPIO | PIN_INPUT_PULLDOWN, /* Magnetometer DRDY */
+
+ /* Display Interface */
+ GPIO65_GPIO | PIN_OUTPUT_LOW, /* DISP1 RST */
+ GPIO66_GPIO | PIN_OUTPUT_LOW, /* DISP2 RST */
+
+ /* Touch screen INTERFACE */
+ GPIO143_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST1 */
+
+ /* Touch screen INTERFACE 2 */
+ GPIO67_GPIO | PIN_INPUT_PULLUP, /* TOUCH_INT2 */
+ GPIO146_GPIO | PIN_OUTPUT_LOW,/*TOUCH_RST2 */
+
+ /* ETM_PTM_TRACE INTERFACE */
+ GPIO70_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA23 */
+ GPIO71_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA22 */
+ GPIO72_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA21 */
+ GPIO73_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA20 */
+ GPIO74_GPIO | PIN_OUTPUT_LOW,/* ETM_PTM_DATA19 */
+
+ /* NAHJ INTERFACE */
+ GPIO76_GPIO | PIN_OUTPUT_LOW,/* NAHJ_CTRL */
+ GPIO216_GPIO | PIN_OUTPUT_HIGH,/* NAHJ_CTRL_INV */
+
+ /* NFC INTERFACE */
+ GPIO77_GPIO | PIN_OUTPUT_LOW, /* NFC_ENA */
+ GPIO144_GPIO | PIN_INPUT_PULLDOWN, /* NFC_IRQ */
+ GPIO142_GPIO | PIN_OUTPUT_LOW, /* NFC_RESET */
+
+ /* Keyboard MATRIX INTERFACE */
+ GPIO90_MC5_CMD | PIN_OUTPUT_LOW, /* KP_O_1 */
+ GPIO87_MC5_DAT1 | PIN_OUTPUT_LOW, /* KP_O_2 */
+ GPIO86_MC5_DAT0 | PIN_OUTPUT_LOW, /* KP_O_3 */
+ GPIO96_KP_O6 | PIN_OUTPUT_LOW, /* KP_O_6 */
+ GPIO94_KP_O7 | PIN_OUTPUT_LOW, /* KP_O_7 */
+ GPIO93_MC5_DAT4 | PIN_INPUT_PULLUP, /* KP_I_0 */
+ GPIO89_MC5_DAT3 | PIN_INPUT_PULLUP, /* KP_I_2 */
+ GPIO88_MC5_DAT2 | PIN_INPUT_PULLUP, /* KP_I_3 */
+ GPIO91_GPIO | PIN_INPUT_PULLUP, /* FORCE_SENSING_INT */
+ GPIO92_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_RST */
+ GPIO97_GPIO | PIN_OUTPUT_LOW, /* FORCE_SENSING_WU */
+
+ /* DiPro Sensor Interface */
+ GPIO139_GPIO | PIN_INPUT_PULLUP, /* DIPRO_INT */
+
+ /* HAL SWITCH INTERFACE */
+ GPIO145_GPIO | PIN_INPUT_PULLDOWN,/* HAL_SW */
+
+ /* Audio Amplifier Interface */
+ GPIO149_GPIO | PIN_OUTPUT_LOW, /* VAUDIO_HF_EN */
+
+ /* GBF INTERFACE */
+ GPIO171_GPIO | PIN_OUTPUT_LOW, /* GBF_ENA_RESET */
+
+ /* MSP : HDTV INTERFACE */
+ GPIO192_GPIO | PIN_INPUT_PULLDOWN,
+
+ /* ACCELEROMETER_INTERFACE */
+ GPIO82_GPIO | PIN_INPUT_PULLUP, /* ACC_INT1 */
+ GPIO83_GPIO | PIN_INPUT_PULLUP, /* ACC_INT2 */
+
+ /* Proximity Sensor */
+ GPIO217_GPIO | PIN_INPUT_PULLUP,
+
+
+};
+
+static pin_cfg_t snowball_pins[] = {
+ /* SSP0, to AB8500 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+ GPIO146_SSP0_TXD,
+
+ /* MMC0: MicroSD card */
+ GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
+
+ /* MMC2: LAN */
+ GPIO86_SM_ADQ0,
+ GPIO87_SM_ADQ1,
+ GPIO88_SM_ADQ2,
+ GPIO89_SM_ADQ3,
+ GPIO90_SM_ADQ4,
+ GPIO91_SM_ADQ5,
+ GPIO92_SM_ADQ6,
+ GPIO93_SM_ADQ7,
+
+ GPIO94_SM_ADVn,
+ GPIO95_SM_CS0n,
+ GPIO96_SM_OEn,
+ GPIO97_SM_WEn,
+
+ GPIO128_SM_CKO,
+ GPIO130_SM_FBCLK,
+ GPIO131_SM_ADQ8,
+ GPIO132_SM_ADQ9,
+ GPIO133_SM_ADQ10,
+ GPIO134_SM_ADQ11,
+ GPIO135_SM_ADQ12,
+ GPIO136_SM_ADQ13,
+ GPIO137_SM_ADQ14,
+ GPIO138_SM_ADQ15,
+
+ /* RSTn_LAN */
+ GPIO141_GPIO | PIN_OUTPUT_HIGH,
+};
+
+void __init mop500_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(mop500_pins_default,
+ ARRAY_SIZE(mop500_pins_default));
+}
+
+void __init snowball_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(snowball_pins,
+ ARRAY_SIZE(snowball_pins));
+}
+
+void __init hrefv60_pins_init(void)
+{
+ nmk_config_pins(mop500_pins_common,
+ ARRAY_SIZE(mop500_pins_common));
+
+ nmk_config_pins(hrefv60_pins,
+ ARRAY_SIZE(hrefv60_pins));
+}
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
new file mode 100644
index 00000000000..2735d03996c
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Authors: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Bengt Jonsson <bengt.g.jonsson@stericsson.com>
+ *
+ * MOP500 board specific initialization for regulators
+ */
+#include <linux/kernel.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+#include "board-mop500-regulators.h"
+
+/*
+ * TPS61052 regulator
+ */
+static struct regulator_consumer_supply tps61052_vaudio_consumers[] = {
+ /*
+ * Boost converter supply to raise voltage on audio speaker, this
+ * is actually connected to three pins, VInVhfL (left amplifier)
+ * VInVhfR (right amplifier) and VIntDClassInt - all three must
+ * be connected to the same voltage.
+ */
+ REGULATOR_SUPPLY("vintdclassint", "ab8500-codec.0"),
+};
+
+struct regulator_init_data tps61052_regulator = {
+ .constraints = {
+ .name = "vaudio-hf",
+ .min_uV = 4500000,
+ .max_uV = 4500000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps61052_vaudio_consumers),
+ .consumer_supplies = tps61052_vaudio_consumers,
+};
+
+static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
+ /* External displays, connector on board 2v5 power supply */
+ REGULATOR_SUPPLY("vaux12v5", "mcde.0"),
+ /* SFH7741 proximity sensor */
+ REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
+ /* BH1780GLS ambient light sensor */
+ REGULATOR_SUPPLY("vcc", "2-0029"),
+ /* lsm303dlh accelerometer */
+ REGULATOR_SUPPLY("vdd", "3-0018"),
+ /* lsm303dlh magnetometer */
+ REGULATOR_SUPPLY("vdd", "3-001e"),
+ /* Rohm BU21013 Touchscreen devices */
+ REGULATOR_SUPPLY("avdd", "3-005c"),
+ REGULATOR_SUPPLY("avdd", "3-005d"),
+ /* Synaptics RMI4 Touchscreen device */
+ REGULATOR_SUPPLY("vdd", "3-004b"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
+ /* On-board eMMC power */
+ REGULATOR_SUPPLY("vmmc", "sdi4"),
+ /* AB8500 audio codec */
+ REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
+ /* External MMC slot power */
+ REGULATOR_SUPPLY("vmmc", "sdi0"),
+};
+
+static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
+ /* TV-out DENC supply */
+ REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
+ /* Internal general-purpose ADC */
+ REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
+ /* SoC core supply, no device */
+ REGULATOR_SUPPLY("v-intcore", NULL),
+ /* USB Transceiver */
+ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
+};
+
+static struct regulator_consumer_supply ab8500_vana_consumers[] = {
+ /* External displays, connector on board, 1v8 power supply */
+ REGULATOR_SUPPLY("vsmps2", "mcde.0"),
+};
+
+/* ab8500 regulator register initialization */
+struct ab8500_regulator_reg_init
+ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS] = {
+ /*
+ * VanaRequestCtrl = HP/LP depending on VxRequest
+ * VextSupply1RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0x00),
+ /*
+ * VextSupply2RequestCtrl = HP/LP depending on VxRequest
+ * VextSupply3RequestCtrl = HP/LP depending on VxRequest
+ * Vaux1RequestCtrl = HP/LP depending on VxRequest
+ * Vaux2RequestCtrl = HP/LP depending on VxRequest
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0x00),
+ /*
+ * Vaux3RequestCtrl = HP/LP depending on VxRequest
+ * SwHPReq = Control through SWValid disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x00),
+ /*
+ * VanaSysClkReq1HPValid = disabled
+ * Vaux1SysClkReq1HPValid = disabled
+ * Vaux2SysClkReq1HPValid = disabled
+ * Vaux3SysClkReq1HPValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0x00),
+ /*
+ * VextSupply1SysClkReq1HPValid = disabled
+ * VextSupply2SysClkReq1HPValid = disabled
+ * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x40),
+ /*
+ * VanaHwHPReq1Valid = disabled
+ * Vaux1HwHPreq1Valid = disabled
+ * Vaux2HwHPReq1Valid = disabled
+ * Vaux3HwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0x00),
+ /*
+ * VextSupply1HwHPReq1Valid = disabled
+ * VextSupply2HwHPReq1Valid = disabled
+ * VextSupply3HwHPReq1Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x00),
+ /*
+ * VanaHwHPReq2Valid = disabled
+ * Vaux1HwHPReq2Valid = disabled
+ * Vaux2HwHPReq2Valid = disabled
+ * Vaux3HwHPReq2Valid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0x00),
+ /*
+ * VextSupply1HwHPReq2Valid = disabled
+ * VextSupply2HwHPReq2Valid = disabled
+ * VextSupply3HwHPReq2Valid = HWReq2 controlled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x04),
+ /*
+ * VanaSwHPReqValid = disabled
+ * Vaux1SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0x00),
+ /*
+ * Vaux2SwHPReqValid = disabled
+ * Vaux3SwHPReqValid = disabled
+ * VextSupply1SwHPReqValid = disabled
+ * VextSupply2SwHPReqValid = disabled
+ * VextSupply3SwHPReqValid = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x00),
+ /*
+ * SysClkReq2Valid1 = SysClkReq2 controlled
+ * SysClkReq3Valid1 = disabled
+ * SysClkReq4Valid1 = SysClkReq4 controlled
+ * SysClkReq5Valid1 = disabled
+ * SysClkReq6Valid1 = SysClkReq6 controlled
+ * SysClkReq7Valid1 = disabled
+ * SysClkReq8Valid1 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0x2a),
+ /*
+ * SysClkReq2Valid2 = disabled
+ * SysClkReq3Valid2 = disabled
+ * SysClkReq4Valid2 = disabled
+ * SysClkReq5Valid2 = disabled
+ * SysClkReq6Valid2 = SysClkReq6 controlled
+ * SysClkReq7Valid2 = disabled
+ * SysClkReq8Valid2 = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0x20),
+ /*
+ * VTVoutEna = disabled
+ * Vintcore12Ena = disabled
+ * Vintcore12Sel = 1.25 V
+ * Vintcore12LP = inactive (HP)
+ * VTVoutLP = inactive (HP)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0x10),
+ /*
+ * VaudioEna = disabled
+ * VdmicEna = disabled
+ * Vamic1Ena = disabled
+ * Vamic2Ena = disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x00),
+ /*
+ * Vamic1_dzout = high-Z when Vamic1 is disabled
+ * Vamic2_dzout = high-Z when Vamic2 is disabled
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x00),
+ /*
+ * VPll = Hw controlled
+ * VanaRegu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x02),
+ /*
+ * VrefDDREna = disabled
+ * VrefDDRSleepMode = inactive (no pulldown)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x00),
+ /*
+ * VextSupply1Regu = HW control
+ * VextSupply2Regu = HW control
+ * VextSupply3Regu = HW control
+ * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
+ * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
+ */
+ INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0x2a),
+ /*
+ * Vaux1Regu = force HP
+ * Vaux2Regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x01),
+ /*
+ * Vaux3regu = force off
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x00),
+ /*
+ * Vsmps1 = 1.15V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VSMPS1SEL1, 0x24),
+ /*
+ * Vaux1Sel = 2.5 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x08),
+ /*
+ * Vaux2Sel = 2.9 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0d),
+ /*
+ * Vaux3Sel = 2.91 V
+ */
+ INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07),
+ /*
+ * VextSupply12LP = disabled (no LP)
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x00),
+ /*
+ * Vaux1Disch = short discharge time
+ * Vaux2Disch = short discharge time
+ * Vaux3Disch = short discharge time
+ * Vintcore12Disch = short discharge time
+ * VTVoutDisch = short discharge time
+ * VaudioDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0x00),
+ /*
+ * VanaDisch = short discharge time
+ * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
+ * VdmicDisch = short discharge time
+ */
+ INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x00),
+};
+
+/* AB8500 regulators */
+struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
+ /* supplies to the display/camera */
+ [AB8500_LDO_AUX1] = {
+ .constraints = {
+ .name = "V-DISPLAY",
+ .min_uV = 2500000,
+ .max_uV = 2900000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1, /* display is on at boot */
+ /*
+ * This voltage cannot be disabled right now because
+ * it is somehow affecting the external MMC
+ * functionality, though that typically will use
+ * AUX3.
+ */
+ .always_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
+ .consumer_supplies = ab8500_vaux1_consumers,
+ },
+ /* supplies to the on-board eMMC */
+ [AB8500_LDO_AUX2] = {
+ .constraints = {
+ .name = "V-eMMC1",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
+ .consumer_supplies = ab8500_vaux2_consumers,
+ },
+ /* supply for VAUX3, supplies to SDcard slots */
+ [AB8500_LDO_AUX3] = {
+ .constraints = {
+ .name = "V-MMC-SD",
+ .min_uV = 1100000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
+ .consumer_supplies = ab8500_vaux3_consumers,
+ },
+ /* supply for tvout, gpadc, TVOUT LDO */
+ [AB8500_LDO_TVOUT] = {
+ .constraints = {
+ .name = "V-TVOUT",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
+ .consumer_supplies = ab8500_vtvout_consumers,
+ },
+ /* supply for ab8500-vaudio, VAUDIO LDO */
+ [AB8500_LDO_AUDIO] = {
+ .constraints = {
+ .name = "V-AUD",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ /* supply for v-anamic1 VAMic1-LDO */
+ [AB8500_LDO_ANAMIC1] = {
+ .constraints = {
+ .name = "V-AMIC1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
+ [AB8500_LDO_ANAMIC2] = {
+ .constraints = {
+ .name = "V-AMIC2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ /* supply for v-dmic, VDMIC LDO */
+ [AB8500_LDO_DMIC] = {
+ .constraints = {
+ .name = "V-DMIC",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ /* supply for v-intcore12, VINTCORE12 LDO */
+ [AB8500_LDO_INTCORE] = {
+ .constraints = {
+ .name = "V-INTCORE",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
+ .consumer_supplies = ab8500_vintcore_consumers,
+ },
+ /* supply for U8500 CSI/DSI, VANA LDO */
+ [AB8500_LDO_ANA] = {
+ .constraints = {
+ .name = "V-CSI/DSI",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
+ .consumer_supplies = ab8500_vana_consumers,
+ },
+};
diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h
new file mode 100644
index 00000000000..94992158d96
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-regulators.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
+ *
+ * MOP500 board specific initialization for regulators
+ */
+
+#ifndef __BOARD_MOP500_REGULATORS_H
+#define __BOARD_MOP500_REGULATORS_H
+
+#include <linux/regulator/machine.h>
+#include <linux/regulator/ab8500.h>
+
+extern struct ab8500_regulator_reg_init
+ab8500_regulator_reg_init[AB8500_NUM_REGULATOR_REGISTERS];
+extern struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS];
+extern struct regulator_init_data tps61052_regulator;
+
+#endif
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
new file mode 100644
index 00000000000..5dde4d4ebe8
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -0,0 +1,289 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <plat/ste_dma40.h>
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "devices-db8500.h"
+#include "board-mop500.h"
+#include "ste-dma40-db8500.h"
+
+/*
+ * v2 has a new version of this block that need to be forced, the number found
+ * in hardware is incorrect
+ */
+#define U8500_SDI_V2_PERIPHID 0x10480180
+
+/*
+ * SDI 0 (MicroSD slot)
+ */
+
+/* MMCIPOWER bits */
+#define MCI_DATA2DIREN (1 << 2)
+#define MCI_CMDDIREN (1 << 3)
+#define MCI_DATA0DIREN (1 << 4)
+#define MCI_DATA31DIREN (1 << 5)
+#define MCI_FBCLKEN (1 << 7)
+
+/* GPIO pins used by the sdi0 level shifter */
+static int sdi0_en = -1;
+static int sdi0_vsel = -1;
+
+static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
+ unsigned char power_mode)
+{
+ switch (power_mode) {
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ /*
+ * Level shifter voltage should depend on vdd to when deciding
+ * on either 1.8V or 2.9V. Once the decision has been made the
+ * level shifter must be disabled and re-enabled with a changed
+ * select signal in order to switch the voltage. Since there is
+ * no framework support yet for indicating 1.8V in vdd, use the
+ * default 2.9V.
+ */
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 1);
+ break;
+ case MMC_POWER_OFF:
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 0);
+ break;
+ }
+
+ return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
+ MCI_DATA2DIREN | MCI_DATA31DIREN;
+}
+
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
+static struct mmci_platform_data mop500_sdi0_data = {
+ .vdd_handler = mop500_sdi0_vdd_handler,
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_MMC_HIGHSPEED,
+ .gpio_wp = -1,
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &mop500_sdi0_dma_cfg_rx,
+ .dma_tx_param = &mop500_sdi0_dma_cfg_tx,
+#endif
+};
+
+static void sdi0_configure(void)
+{
+ int ret;
+
+ ret = gpio_request(sdi0_en, "level shifter enable");
+ if (!ret)
+ ret = gpio_request(sdi0_vsel,
+ "level shifter 1v8-3v select");
+
+ if (ret) {
+ pr_warning("unable to config sdi0 gpios for level shifter.\n");
+ return;
+ }
+
+ /* Select the default 2.9V and enable level shifter */
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 1);
+
+ /* Add the device, force v2 to subrevision 1 */
+ db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+}
+
+void mop500_sdi_tc35892_init(void)
+{
+ mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
+ sdi0_en = GPIO_SDMMC_EN;
+ sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
+ sdi0_configure();
+}
+
+/*
+ * SDI1 (SDIO WLAN)
+ */
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
+static struct mmci_platform_data mop500_sdi1_data = {
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &sdi1_dma_cfg_rx,
+ .dma_tx_param = &sdi1_dma_cfg_tx,
+#endif
+};
+
+/*
+ * SDI 2 (POP eMMC, not on DB8500ed)
+ */
+
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV28_SD_MM2_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
+static struct mmci_platform_data mop500_sdi2_data = {
+ .ocr_mask = MMC_VDD_165_195,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &mop500_sdi2_dma_cfg_rx,
+ .dma_tx_param = &mop500_sdi2_dma_cfg_tx,
+#endif
+};
+
+/*
+ * SDI 4 (on-board eMMC)
+ */
+
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV42_SD_MM4_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
+static struct mmci_platform_data mop500_sdi4_data = {
+ .ocr_mask = MMC_VDD_29_30,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &mop500_sdi4_dma_cfg_rx,
+ .dma_tx_param = &mop500_sdi4_dma_cfg_tx,
+#endif
+};
+
+void __init mop500_sdi_init(void)
+{
+ /* PoP:ed eMMC */
+ db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /*
+ * On boards with the TC35892 GPIO expander, sdi0 will finally
+ * be added when the TC35892 initializes and calls
+ * mop500_sdi_tc35892_init() above.
+ */
+}
+
+void __init snowball_sdi_init(void)
+{
+ /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
+ mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /* External Micro SD slot */
+ mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
+ mop500_sdi0_data.cd_invert = true;
+ sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
+ sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+}
+
+void __init hrefv60_sdi_init(void)
+{
+ /* PoP:ed eMMC */
+ db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+ /* On-board eMMC */
+ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ /* External Micro SD slot */
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+ /* WLAN SDIO channel */
+ db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
new file mode 100644
index 00000000000..8c979770d87
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -0,0 +1,205 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/input/bu21013.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input/matrix_keypad.h>
+#include <asm/mach-types.h>
+
+#include "board-mop500.h"
+
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+ KEY(2, 5, KEY_END),
+ KEY(4, 1, KEY_POWER),
+ KEY(3, 5, KEY_VOLUMEDOWN),
+ KEY(1, 3, KEY_3),
+ KEY(5, 2, KEY_RIGHT),
+ KEY(5, 0, KEY_9),
+
+ KEY(0, 5, KEY_MENU),
+ KEY(7, 6, KEY_ENTER),
+ KEY(4, 5, KEY_0),
+ KEY(6, 7, KEY_2),
+ KEY(3, 4, KEY_UP),
+ KEY(3, 3, KEY_DOWN),
+
+ KEY(6, 4, KEY_SEND),
+ KEY(6, 2, KEY_BACK),
+ KEY(4, 2, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_1),
+ KEY(4, 3, KEY_LEFT),
+ KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+ .keymap = mop500_keymap,
+ .keymap_size = ARRAY_SIZE(mop500_keymap),
+};
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+ .debounce_ms = 64,
+ .scan_count = 8,
+ .no_autorepeat = true,
+ .keymap_data = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+ .id = 1,
+ .blocks = STMPE_BLOCK_KEYPAD,
+ .irq_trigger = IRQF_TRIGGER_FALLING,
+ .irq_base = MOP500_STMPE1601_IRQ(0),
+ .keypad = &stmpe1601_keypad_data,
+ .autosleep = true,
+ .autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("stmpe1601", 0x40),
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .platform_data = &stmpe1601_data,
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
+/*
+ * BU21013 ROHM touchscreen interface on the STUIBs
+ */
+
+/* tracks number of bu21013 devices being enabled */
+static int bu21013_devices;
+
+#define TOUCH_GPIO_PIN 84
+
+#define TOUCH_XMAX 384
+#define TOUCH_YMAX 704
+
+#define PRCMU_CLOCK_OCR 0x1CC
+#define TSC_EXT_CLOCK_9_6MHZ 0x840000
+
+/**
+ * bu21013_gpio_board_init : configures the touch panel.
+ * @reset_pin: reset pin number
+ * This function can be used to configures
+ * the voltage and reset the touch panel controller.
+ */
+static int bu21013_gpio_board_init(int reset_pin)
+{
+ int retval = 0;
+
+ bu21013_devices++;
+ if (bu21013_devices == 1) {
+ retval = gpio_request(reset_pin, "touchp_reset");
+ if (retval) {
+ printk(KERN_ERR "Unable to request gpio reset_pin");
+ return retval;
+ }
+ retval = gpio_direction_output(reset_pin, 1);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: gpio direction failed\n",
+ __func__);
+ return retval;
+ }
+ }
+
+ return retval;
+}
+
+/**
+ * bu21013_gpio_board_exit : deconfigures the touch panel controller
+ * @reset_pin: reset pin number
+ * This function can be used to deconfigures the chip selection
+ * for touch panel controller.
+ */
+static int bu21013_gpio_board_exit(int reset_pin)
+{
+ int retval = 0;
+
+ if (bu21013_devices == 1) {
+ retval = gpio_direction_output(reset_pin, 0);
+ if (retval < 0) {
+ printk(KERN_ERR "%s: gpio direction failed\n",
+ __func__);
+ return retval;
+ }
+ gpio_set_value(reset_pin, 0);
+ }
+ bu21013_devices--;
+
+ return retval;
+}
+
+/**
+ * bu21013_read_pin_val : get the interrupt pin value
+ * This function can be used to get the interrupt pin value for touch panel
+ * controller.
+ */
+static int bu21013_read_pin_val(void)
+{
+ return gpio_get_value(TOUCH_GPIO_PIN);
+}
+
+static struct bu21013_platform_device tsc_plat_device = {
+ .cs_en = bu21013_gpio_board_init,
+ .cs_dis = bu21013_gpio_board_exit,
+ .irq_read_val = bu21013_read_pin_val,
+ .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+ .touch_x_max = TOUCH_XMAX,
+ .touch_y_max = TOUCH_YMAX,
+ .ext_clk = false,
+ .x_flip = false,
+ .y_flip = true,
+};
+
+static struct bu21013_platform_device tsc_plat2_device = {
+ .cs_en = bu21013_gpio_board_init,
+ .cs_dis = bu21013_gpio_board_exit,
+ .irq_read_val = bu21013_read_pin_val,
+ .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
+ .touch_x_max = TOUCH_XMAX,
+ .touch_y_max = TOUCH_YMAX,
+ .ext_clk = false,
+ .x_flip = false,
+ .y_flip = true,
+};
+
+static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
+ {
+ I2C_BOARD_INFO("bu21013_tp", 0x5C),
+ .platform_data = &tsc_plat_device,
+ },
+ {
+ I2C_BOARD_INFO("bu21013_tp", 0x5D),
+ .platform_data = &tsc_plat2_device,
+ },
+
+};
+
+void __init mop500_stuib_init(void)
+{
+ if (machine_is_hrefv60()) {
+ tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
+ tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
+ } else {
+ tsc_plat_device.cs_pin = GPIO_BU21013_CS;
+ tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
+
+ }
+
+ mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
+ ARRAY_SIZE(mop500_i2c0_devices_stuib));
+
+ mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
+ ARRAY_SIZE(u8500_i2c3_devices_stuib));
+}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
new file mode 100644
index 00000000000..feb5744d98b
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Board data for the U8500 UIB, also known as the New UIB
+ * License terms: GNU General Public License (GPL), version 2
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <mach/irqs.h>
+
+#include "board-mop500.h"
+
+/* Dummy data that can be overridden by staging driver */
+struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = {
+};
+
+/*
+ * TC35893
+ */
+static const unsigned int u8500_keymap[] = {
+ KEY(3, 1, KEY_END),
+ KEY(4, 1, KEY_POWER),
+ KEY(6, 4, KEY_VOLUMEDOWN),
+ KEY(4, 2, KEY_EMAIL),
+ KEY(3, 3, KEY_RIGHT),
+ KEY(2, 5, KEY_BACKSPACE),
+
+ KEY(6, 7, KEY_MENU),
+ KEY(5, 0, KEY_ENTER),
+ KEY(4, 3, KEY_0),
+ KEY(3, 4, KEY_DOT),
+ KEY(5, 2, KEY_UP),
+ KEY(3, 5, KEY_DOWN),
+
+ KEY(4, 5, KEY_SEND),
+ KEY(0, 5, KEY_BACK),
+ KEY(6, 2, KEY_VOLUMEUP),
+ KEY(1, 3, KEY_SPACE),
+ KEY(7, 6, KEY_LEFT),
+ KEY(5, 5, KEY_SEARCH),
+};
+
+static struct matrix_keymap_data u8500_keymap_data = {
+ .keymap = u8500_keymap,
+ .keymap_size = ARRAY_SIZE(u8500_keymap),
+};
+
+static struct tc3589x_keypad_platform_data tc35893_data = {
+ .krow = TC_KPD_ROWS,
+ .kcol = TC_KPD_COLUMNS,
+ .debounce_period = TC_KPD_DEBOUNCE_PERIOD,
+ .settle_time = TC_KPD_SETTLE_TIME,
+ .irqtype = IRQF_TRIGGER_FALLING,
+ .enable_wakeup = true,
+ .keymap_data = &u8500_keymap_data,
+ .no_autorepeat = true,
+};
+
+static struct tc3589x_platform_data tc3589x_keypad_data = {
+ .block = TC3589x_BLOCK_KEYPAD,
+ .keypad = &tc35893_data,
+ .irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
+ {
+ I2C_BOARD_INFO("tc3589x", 0x44),
+ .platform_data = &tc3589x_keypad_data,
+ .irq = NOMADIK_GPIO_TO_IRQ(218),
+ .flags = I2C_CLIENT_WAKE,
+ },
+};
+
+
+void __init mop500_u8500uib_init(void)
+{
+ mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
+ ARRAY_SIZE(mop500_i2c3_devices_u8500));
+
+ mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
+ ARRAY_SIZE(mop500_i2c0_devices_u8500));
+
+}
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
new file mode 100644
index 00000000000..5af36aa56c0
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#define pr_fmt(fmt) "mop500-uib: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#include <mach/hardware.h>
+#include "board-mop500.h"
+
+enum mop500_uib {
+ STUIB,
+ U8500UIB,
+};
+
+struct uib {
+ const char *name;
+ const char *option;
+ void (*init)(void);
+};
+
+static struct uib __initdata mop500_uibs[] = {
+ [STUIB] = {
+ .name = "ST-UIB",
+ .option = "stuib",
+ .init = mop500_stuib_init,
+ },
+ [U8500UIB] = {
+ .name = "U8500-UIB",
+ .option = "u8500uib",
+ .init = mop500_u8500uib_init,
+ },
+};
+
+static struct uib *mop500_uib;
+
+static int __init mop500_uib_setup(char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
+ struct uib *uib = &mop500_uibs[i];
+
+ if (!strcmp(str, uib->option)) {
+ mop500_uib = uib;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(mop500_uibs))
+ pr_err("invalid uib= option (%s)\n", str);
+
+ return 1;
+}
+__setup("uib=", mop500_uib_setup);
+
+/*
+ * The UIBs are detected after the I2C host controllers are registered, so
+ * i2c_register_board_info() can't be used.
+ */
+void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
+ unsigned n)
+{
+ struct i2c_adapter *adap;
+ struct i2c_client *client;
+ int i;
+
+ adap = i2c_get_adapter(busnum);
+ if (!adap) {
+ pr_err("failed to get adapter i2c%d\n", busnum);
+ return;
+ }
+
+ for (i = 0; i < n; i++) {
+ client = i2c_new_device(adap, &info[i]);
+ if (!client)
+ pr_err("failed to register %s to i2c%d\n",
+ info[i].type, busnum);
+ }
+
+ i2c_put_adapter(adap);
+}
+
+static void __init __mop500_uib_init(struct uib *uib, const char *why)
+{
+ pr_info("%s (%s)\n", uib->name, why);
+ uib->init();
+}
+
+/*
+ * Detect the UIB attached based on the presence or absence of i2c devices.
+ */
+static int __init mop500_uib_init(void)
+{
+ struct uib *uib = mop500_uib;
+ struct i2c_adapter *i2c0;
+ int ret;
+
+ if (!cpu_is_u8500())
+ return -ENODEV;
+
+ if (uib) {
+ __mop500_uib_init(uib, "from uib= boot argument");
+ return 0;
+ }
+
+ i2c0 = i2c_get_adapter(0);
+ if (!i2c0) {
+ __mop500_uib_init(&mop500_uibs[STUIB],
+ "fallback, could not get i2c0");
+ return -ENODEV;
+ }
+
+ /* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
+ ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
+ I2C_SMBUS_QUICK, NULL);
+ i2c_put_adapter(i2c0);
+
+ if (ret == 0)
+ uib = &mop500_uibs[U8500UIB];
+ else
+ uib = &mop500_uibs[STUIB];
+
+ __mop500_uib_init(uib, "detected");
+
+ return 0;
+}
+
+module_init(mop500_uib_init);
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 00000000000..5c00712907d
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,720 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/amba/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/regulator/ab8500.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/mfd/tps6105x.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
+#include <linux/leds-lp5521.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio_keys.h>
+#include <linux/delay.h>
+
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/i2c.h>
+#include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+#include <mach/irqs.h>
+
+#include "pins-db8500.h"
+#include "ste-dma40-db8500.h"
+#include "devices-db8500.h"
+#include "board-mop500.h"
+#include "board-mop500-regulators.h"
+
+static struct gpio_led snowball_led_array[] = {
+ {
+ .name = "user_led",
+ .default_trigger = "none",
+ .gpio = 142,
+ },
+};
+
+static struct gpio_led_platform_data snowball_led_data = {
+ .leds = snowball_led_array,
+ .num_leds = ARRAY_SIZE(snowball_led_array),
+};
+
+static struct platform_device snowball_led_dev = {
+ .name = "leds-gpio",
+ .dev = {
+ .platform_data = &snowball_led_data,
+ },
+};
+
+static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+ .gpio_base = MOP500_AB8500_GPIO(0),
+ .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
+ /* config_reg is the initial configuration of ab8500 pins.
+ * The pins can be configured as GPIO or alt functions based
+ * on value present in GpioSel1 to GpioSel6 and AlternatFunction
+ * register. This is the array of 7 configuration settings.
+ * One has to compile time decide these settings. Below is the
+ * explanation of these setting
+ * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
+ * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
+ * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
+ * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
+ * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
+ * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
+ * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
+ * as GPIO then this register selectes the alternate fucntions
+ */
+ .config_reg = {0x00, 0x1E, 0x80, 0x01,
+ 0x7A, 0x00, 0x00},
+};
+
+static struct gpio_keys_button snowball_key_array[] = {
+ {
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_1,
+ .desc = "userpb",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 151,
+ .type = EV_KEY,
+ .code = KEY_2,
+ .desc = "extkb1",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 152,
+ .type = EV_KEY,
+ .code = KEY_3,
+ .desc = "extkb2",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 161,
+ .type = EV_KEY,
+ .code = KEY_4,
+ .desc = "extkb3",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 162,
+ .type = EV_KEY,
+ .code = KEY_5,
+ .desc = "extkb4",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data snowball_key_data = {
+ .buttons = snowball_key_array,
+ .nbuttons = ARRAY_SIZE(snowball_key_array),
+};
+
+static struct platform_device snowball_key_dev = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &snowball_key_data,
+ }
+};
+
+static struct smsc911x_platform_config snowball_sbnet_cfg = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .shift = 1,
+};
+
+static struct resource sbnet_res[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = (0x5000 << 16),
+ .end = (0x5000 << 16) + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NOMADIK_GPIO_TO_IRQ(140),
+ .end = NOMADIK_GPIO_TO_IRQ(140),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device snowball_sbnet_dev = {
+ .name = "smsc911x",
+ .num_resources = ARRAY_SIZE(sbnet_res),
+ .resource = sbnet_res,
+ .dev = {
+ .platform_data = &snowball_sbnet_cfg,
+ },
+};
+
+static struct ab8500_platform_data ab8500_platdata = {
+ .irq_base = MOP500_AB8500_IRQ_BASE,
+ .regulator_reg_init = ab8500_regulator_reg_init,
+ .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
+ .regulator = ab8500_regulators,
+ .num_regulator = ARRAY_SIZE(ab8500_regulators),
+ .gpio = &ab8500_gpio_pdata,
+};
+
+static struct resource ab8500_resources[] = {
+ [0] = {
+ .start = IRQ_DB8500_AB8500,
+ .end = IRQ_DB8500_AB8500,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device ab8500_device = {
+ .name = "ab8500-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab8500_platdata,
+ },
+ .num_resources = 1,
+ .resource = ab8500_resources,
+};
+
+/*
+ * TPS61052
+ */
+
+static struct tps6105x_platform_data mop500_tps61052_data = {
+ .mode = TPS6105X_MODE_VOLTAGE,
+ .regulator_data = &tps61052_regulator,
+};
+
+/*
+ * TC35892
+ */
+
+static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
+{
+ mop500_sdi_tc35892_init();
+}
+
+static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
+ .gpio_base = MOP500_EGPIO(0),
+ .setup = mop500_tc35892_init,
+};
+
+static struct tc3589x_platform_data mop500_tc35892_data = {
+ .block = TC3589x_BLOCK_GPIO,
+ .gpio = &mop500_tc35892_gpio_data,
+ .irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct lp5521_led_config lp5521_pri_led[] = {
+ [0] = {
+ .chan_nr = 0,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [1] = {
+ .chan_nr = 1,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [2] = {
+ .chan_nr = 2,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+};
+
+static struct lp5521_platform_data __initdata lp5521_pri_data = {
+ .label = "lp5521_pri",
+ .led_config = &lp5521_pri_led[0],
+ .num_channels = 3,
+ .clock_mode = LP5521_CLOCK_EXT,
+};
+
+static struct lp5521_led_config lp5521_sec_led[] = {
+ [0] = {
+ .chan_nr = 0,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [1] = {
+ .chan_nr = 1,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [2] = {
+ .chan_nr = 2,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+};
+
+static struct lp5521_platform_data __initdata lp5521_sec_data = {
+ .label = "lp5521_sec",
+ .led_config = &lp5521_sec_led[0],
+ .num_channels = 3,
+ .clock_mode = LP5521_CLOCK_EXT,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("tc3589x", 0x42),
+ .irq = NOMADIK_GPIO_TO_IRQ(217),
+ .platform_data = &mop500_tc35892_data,
+ },
+ /* I2C0 devices only available prior to HREFv60 */
+ {
+ I2C_BOARD_INFO("tps61052", 0x33),
+ .platform_data = &mop500_tps61052_data,
+ },
+};
+
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
+static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
+ {
+ /* lp5521 LED driver, 1st device */
+ I2C_BOARD_INFO("lp5521", 0x33),
+ .platform_data = &lp5521_pri_data,
+ },
+ {
+ /* lp5521 LED driver, 2st device */
+ I2C_BOARD_INFO("lp5521", 0x34),
+ .platform_data = &lp5521_sec_data,
+ },
+ {
+ /* Light sensor Rohm BH1780GLI */
+ I2C_BOARD_INFO("bh1780", 0x29),
+ },
+};
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ /* Slave response timeout(ms) */\
+ .timeout = t_out, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 8 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+
+static void __init mop500_i2c_init(void)
+{
+ db8500_add_i2c0(&u8500_i2c0_data);
+ db8500_add_i2c1(&u8500_i2c1_data);
+ db8500_add_i2c2(&u8500_i2c2_data);
+ db8500_add_i2c3(&u8500_i2c3_data);
+}
+
+static struct gpio_keys_button mop500_gpio_keys[] = {
+ {
+ .desc = "SFH7741 Proximity Sensor",
+ .type = EV_SW,
+ .code = SW_FRONT_PROXIMITY,
+ .active_low = 0,
+ .can_disable = 1,
+ }
+};
+
+static struct regulator *prox_regulator;
+static int mop500_prox_activate(struct device *dev);
+static void mop500_prox_deactivate(struct device *dev);
+
+static struct gpio_keys_platform_data mop500_gpio_keys_data = {
+ .buttons = mop500_gpio_keys,
+ .nbuttons = ARRAY_SIZE(mop500_gpio_keys),
+ .enable = mop500_prox_activate,
+ .disable = mop500_prox_deactivate,
+};
+
+static struct platform_device mop500_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = 0,
+ .dev = {
+ .platform_data = &mop500_gpio_keys_data,
+ },
+};
+
+static int mop500_prox_activate(struct device *dev)
+{
+ prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
+ "vcc");
+ if (IS_ERR(prox_regulator)) {
+ dev_err(&mop500_gpio_keys_device.dev,
+ "no regulator\n");
+ return PTR_ERR(prox_regulator);
+ }
+ regulator_enable(prox_regulator);
+ return 0;
+}
+
+static void mop500_prox_deactivate(struct device *dev)
+{
+ regulator_disable(prox_regulator);
+ regulator_put(prox_regulator);
+}
+
+/* add any platform devices here - TODO */
+static struct platform_device *mop500_platform_devs[] __initdata = {
+ &mop500_gpio_keys_device,
+ &ab8500_device,
+};
+
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV8_SSP0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+#endif
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+ .bus_id = 0,
+#ifdef CONFIG_STE_DMA40
+ .enable_dma = 1,
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &ssp0_dma_cfg_rx,
+ .dma_tx_param = &ssp0_dma_cfg_tx,
+#else
+ .enable_dma = 0,
+#endif
+ /* on this platform, gpio 31,142,144,214 &
+ * 224 are connected as chip selects
+ */
+ .num_chipselect = 5,
+};
+
+static void __init mop500_spi_init(void)
+{
+ db8500_add_ssp0(&ssp0_platform_data);
+}
+
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV13_UART0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV12_UART1_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV11_UART2_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+#endif
+
+
+static pin_cfg_t mop500_pins_uart0[] = {
+ GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
+ GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
+ GPIO2_U0_RXD | PIN_INPUT_PULLUP,
+ GPIO3_U0_TXD | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET 0x18
+#define PRCC_K_SOFTRST_CLEAR 0x1C
+static void ux500_uart0_reset(void)
+{
+ void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+ prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+ PRCC_K_SOFTRST_SET);
+ prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+ PRCC_K_SOFTRST_CLEAR);
+
+ /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+ writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+ udelay(1);
+
+ /* Release soft reset PRCC_K_SOFTRST_SET */
+ writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+ udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+ int ret;
+
+ ret = nmk_config_pins(mop500_pins_uart0,
+ ARRAY_SIZE(mop500_pins_uart0));
+ if (ret < 0)
+ pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+ int ret;
+
+ ret = nmk_config_pins_sleep(mop500_pins_uart0,
+ ARRAY_SIZE(mop500_pins_uart0));
+ if (ret < 0)
+ pr_err("pl011: uart pins_disable failed\n");
+}
+
+static struct amba_pl011_data uart0_plat = {
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &uart0_dma_cfg_rx,
+ .dma_tx_param = &uart0_dma_cfg_tx,
+#endif
+ .init = ux500_uart0_init,
+ .exit = ux500_uart0_exit,
+ .reset = ux500_uart0_reset,
+};
+
+static struct amba_pl011_data uart1_plat = {
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &uart1_dma_cfg_rx,
+ .dma_tx_param = &uart1_dma_cfg_tx,
+#endif
+};
+
+static struct amba_pl011_data uart2_plat = {
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &uart2_dma_cfg_rx,
+ .dma_tx_param = &uart2_dma_cfg_tx,
+#endif
+};
+
+static void __init mop500_uart_init(void)
+{
+ db8500_add_uart0(&uart0_plat);
+ db8500_add_uart1(&uart1_plat);
+ db8500_add_uart2(&uart2_plat);
+}
+
+static struct platform_device *snowball_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+ &snowball_sbnet_dev,
+ &ab8500_device,
+};
+
+static void __init mop500_init_machine(void)
+{
+ int i2c0_devs;
+
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+
+ u8500_init_devices();
+
+ mop500_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init snowball_init_machine(void)
+{
+ int i2c0_devs;
+
+ u8500_init_devices();
+
+ snowball_pins_init();
+
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+
+ mop500_i2c_init();
+ snowball_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init hrefv60_init_machine(void)
+{
+ int i2c0_devs;
+
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+
+ u8500_init_devices();
+
+ hrefv60_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ hrefv60_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+ /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = mop500_init_machine,
+MACHINE_END
+
+MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = hrefv60_init_machine,
+MACHINE_END
+
+MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = snowball_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
new file mode 100644
index 00000000000..f926d3db620
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __BOARD_MOP500_H
+#define __BOARD_MOP500_H
+
+/* Snowball specific GPIO assignments, this board has no GPIO expander */
+#define SNOWBALL_ACCEL_INT1_GPIO 163
+#define SNOWBALL_ACCEL_INT2_GPIO 164
+#define SNOWBALL_MAGNET_DRDY_GPIO 165
+#define SNOWBALL_SDMMC_EN_GPIO 217
+#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
+#define SNOWBALL_SDMMC_CD_GPIO 218
+
+/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
+#define HREFV60_SDMMC_1V8_3V_GPIO 5
+#define HREFV60_CAMERA_FLASH_ENABLE 21
+#define HREFV60_MAGNET_DRDY_GPIO 32
+#define HREFV60_DISP1_RST_GPIO 65
+#define HREFV60_DISP2_RST_GPIO 66
+#define HREFV60_ACCEL_INT1_GPIO 82
+#define HREFV60_ACCEL_INT2_GPIO 83
+#define HREFV60_SDMMC_CD_GPIO 95
+#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
+#define HREFV60_TOUCH_RST_GPIO 143
+#define HREFV60_HAL_SW_GPIO 145
+#define HREFV60_SDMMC_EN_GPIO 169
+#define HREFV60_MMIO_XENON_CHARGE 170
+#define HREFV60_PROX_SENSE_GPIO 217
+
+/* MOP500 generic GPIOs */
+#define CAMERA_FLASH_INT_PIN 7
+#define CYPRESS_TOUCH_INT_PIN 84
+#define XSHUTDOWN_PRIMARY_SENSOR 141
+#define XSHUTDOWN_SECONDARY_SENSOR 142
+#define CYPRESS_TOUCH_RST_GPIO 143
+#define MOP500_HDMI_RST_GPIO 196
+#define CYPRESS_SLAVE_SELECT_GPIO 216
+
+/* GPIOs on the TC35892 expander */
+#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
+#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
+#define GPIO_SDMMC_CD MOP500_EGPIO(3)
+#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
+#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
+#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
+#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
+#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
+#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
+#define GPIO_BU21013_CS MOP500_EGPIO(13)
+#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
+#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
+#define GPIO_SDMMC_EN MOP500_EGPIO(17)
+#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
+#define MOP500_EGPIO_END MOP500_EGPIO(24)
+
+/*
+ * GPIOs on the AB8500 mixed-signals circuit
+ * Notice that we subtract 1 from the number passed into the macro, this is
+ * because the AB8500 GPIO pins are enumbered starting from 1, so the value in
+ * parens matches the GPIO pin number in the data sheet.
+ */
+#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
+/*Snowball AB8500 GPIO */
+#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
+#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
+#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
+#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
+#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
+#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
+#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
+
+struct i2c_board_info;
+
+extern void mop500_sdi_init(void);
+extern void snowball_sdi_init(void);
+extern void hrefv60_sdi_init(void);
+extern void mop500_sdi_tc35892_init(void);
+void __init mop500_u8500uib_init(void);
+void __init mop500_stuib_init(void);
+void __init mop500_pins_init(void);
+void __init hrefv60_pins_init(void);
+void __init snowball_pins_init(void);
+
+void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
+ unsigned n);
+
+#endif
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
new file mode 100644
index 00000000000..63c3f8058ff
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+
+#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
+#include <mach/db5500-regs.h>
+#include <plat/ste_dma40.h>
+
+#include "pins-db5500.h"
+#include "devices-db5500.h"
+#include "ste-dma40-db5500.h"
+
+static pin_cfg_t u5500_sdi_pins[] = {
+ /* SDI0 (POP eMMC) */
+ GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP,
+ GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW,
+};
+
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg u5500_sdi0_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB5500_DMA_DEV24_SDMMC0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg u5500_sdi0_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB5500_DMA_DEV24_SDMMC0_TX,
+ .src_info.data_width = STEDMA40_WORD_WIDTH,
+ .dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
+static struct mmci_platform_data u5500_sdi0_data = {
+ .ocr_mask = MMC_VDD_165_195,
+ .f_max = 50000000,
+ .capabilities = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &u5500_sdi0_dma_cfg_rx,
+ .dma_tx_param = &u5500_sdi0_dma_cfg_tx,
+#endif
+};
+
+void __init u5500_sdi_init(void)
+{
+ nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
+
+ db5500_add_sdi0(&u5500_sdi0_data);
+}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
new file mode 100644
index 00000000000..9de9e9c4dbb
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/mfd/abx500/ab5500.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/pincfg.h>
+#include <plat/i2c.h>
+#include <plat/gpio-nomadik.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+
+#include "pins-db5500.h"
+#include "devices-db5500.h"
+#include <linux/led-lm3530.h>
+
+/*
+ * GPIO
+ */
+
+static pin_cfg_t u5500_pins[] = {
+ /* I2C */
+ GPIO218_I2C2_SCL | PIN_INPUT_PULLUP,
+ GPIO219_I2C2_SDA | PIN_INPUT_PULLUP,
+
+ /* DISPLAY_ENABLE */
+ GPIO226_GPIO | PIN_OUTPUT_LOW,
+
+ /* Backlight Enbale */
+ GPIO224_GPIO | PIN_OUTPUT_HIGH,
+};
+/*
+ * I2C
+ */
+
+#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+static struct nmk_i2c_controller u5500_i2c##id##_data = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ .sm = _sm, \
+}
+/*
+ * The board uses TODO <3> i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 1 and standard
+ * mode of operation
+ */
+
+U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST);
+
+static struct lm3530_platform_data u5500_als_platform_data = {
+ .mode = LM3530_BL_MODE_MANUAL,
+ .als_input_mode = LM3530_INPUT_ALS1,
+ .max_current = LM3530_FS_CURR_26mA,
+ .pwm_pol_hi = true,
+ .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms,
+ .brt_ramp_law = 1, /* Linear */
+ .brt_ramp_fall = LM3530_RAMP_TIME_8s,
+ .brt_ramp_rise = LM3530_RAMP_TIME_8s,
+ .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm,
+ .als2_resistor_sel = LM3530_ALS_IMPD_Z,
+ .als_vmin = 730, /* mV */
+ .als_vmax = 1020, /* mV */
+ .brt_val = 0x7F, /* Max brightness */
+};
+
+static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
+ {
+ /* Backlight */
+ I2C_BOARD_INFO("lm3530-led", 0x36),
+ .platform_data = &u5500_als_platform_data,
+ },
+};
+
+static void __init u5500_i2c_init(void)
+{
+ db5500_add_i2c2(&u5500_i2c2_data);
+ i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
+}
+
+static struct ab5500_platform_data ab5500_plf_data = {
+ .irq = {
+ .base = 0,
+ .count = 0,
+ },
+ .init_settings = NULL,
+ .init_settings_sz = 0,
+ .pm_power_off = false,
+};
+
+static struct platform_device ab5500_device = {
+ .name = "ab5500-core",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab5500_plf_data,
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device *u5500_platform_devices[] __initdata = {
+ &ab5500_device,
+};
+
+static void __init u5500_uart_init(void)
+{
+ db5500_add_uart0(NULL);
+ db5500_add_uart1(NULL);
+ db5500_add_uart2(NULL);
+}
+
+static void __init u5500_init_machine(void)
+{
+ u5500_init_devices();
+ nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
+ u5500_i2c_init();
+ u5500_sdi_init();
+ u5500_uart_init();
+
+ platform_add_devices(u5500_platform_devices,
+ ARRAY_SIZE(u5500_platform_devices));
+}
+
+MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
+ .atag_offset = 0x100,
+ .map_io = u5500_map_io,
+ .init_irq = ux500_init_irq,
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = u5500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
new file mode 100644
index 00000000000..da5569d83d5
--- /dev/null
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/io.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/hardware.h>
+#include <mach/id.h>
+
+static void __iomem *l2x0_base;
+
+static int __init ux500_l2x0_unlock(void)
+{
+ int i;
+
+ /*
+ * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
+ * apparently locks both caches before jumping to the kernel. The
+ * l2x0 core will not touch the unlock registers if the l2x0 is
+ * already enabled, so we do it right here instead. The PL310 has
+ * 8 sets of registers, one per possible CPU.
+ */
+ for (i = 0; i < 8; i++) {
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
+ i * L2X0_LOCKDOWN_STRIDE);
+ }
+ return 0;
+}
+
+static int __init ux500_l2x0_init(void)
+{
+ if (cpu_is_u5500())
+ l2x0_base = __io_address(U5500_L2CC_BASE);
+ else if (cpu_is_u8500())
+ l2x0_base = __io_address(U8500_L2CC_BASE);
+ else
+ ux500_unknown_soc();
+
+ /* Unlock before init */
+ ux500_l2x0_unlock();
+
+ /* 64KB way size, 8 way associativity, force WA */
+ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+
+ /*
+ * We can't disable l2 as we are in non secure mode, currently
+ * this seems be called only during kexec path. So let's
+ * override outer.disable with nasty assignment until we have
+ * some SMI service available.
+ */
+ outer_cache.disable = NULL;
+
+ return 0;
+}
+
+early_initcall(ux500_l2x0_init);
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 00000000000..73790753700
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,716 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ * Copyright (C) 2009 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/cpufreq.h>
+
+#include <plat/mtu.h>
+#include <mach/hardware.h>
+#include "clock.h"
+
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h> /* for copy_from_user */
+static LIST_HEAD(clk_list);
+#endif
+
+#define PRCC_PCKEN 0x00
+#define PRCC_PCKDIS 0x04
+#define PRCC_KCKEN 0x08
+#define PRCC_KCKDIS 0x0C
+
+#define PRCM_YYCLKEN0_MGT_SET 0x510
+#define PRCM_YYCLKEN1_MGT_SET 0x514
+#define PRCM_YYCLKEN0_MGT_CLR 0x518
+#define PRCM_YYCLKEN1_MGT_CLR 0x51C
+#define PRCM_YYCLKEN0_MGT_VAL 0x520
+#define PRCM_YYCLKEN1_MGT_VAL 0x524
+
+#define PRCM_SVAMMDSPCLK_MGT 0x008
+#define PRCM_SIAMMDSPCLK_MGT 0x00C
+#define PRCM_SGACLK_MGT 0x014
+#define PRCM_UARTCLK_MGT 0x018
+#define PRCM_MSP02CLK_MGT 0x01C
+#define PRCM_MSP1CLK_MGT 0x288
+#define PRCM_I2CCLK_MGT 0x020
+#define PRCM_SDMMCCLK_MGT 0x024
+#define PRCM_SLIMCLK_MGT 0x028
+#define PRCM_PER1CLK_MGT 0x02C
+#define PRCM_PER2CLK_MGT 0x030
+#define PRCM_PER3CLK_MGT 0x034
+#define PRCM_PER5CLK_MGT 0x038
+#define PRCM_PER6CLK_MGT 0x03C
+#define PRCM_PER7CLK_MGT 0x040
+#define PRCM_LCDCLK_MGT 0x044
+#define PRCM_BMLCLK_MGT 0x04C
+#define PRCM_HSITXCLK_MGT 0x050
+#define PRCM_HSIRXCLK_MGT 0x054
+#define PRCM_HDMICLK_MGT 0x058
+#define PRCM_APEATCLK_MGT 0x05C
+#define PRCM_APETRACECLK_MGT 0x060
+#define PRCM_MCDECLK_MGT 0x064
+#define PRCM_IPI2CCLK_MGT 0x068
+#define PRCM_DSIALTCLK_MGT 0x06C
+#define PRCM_DMACLK_MGT 0x074
+#define PRCM_B2R2CLK_MGT 0x078
+#define PRCM_TVCLK_MGT 0x07C
+#define PRCM_TCR 0x1C8
+#define PRCM_TCR_STOPPED (1 << 16)
+#define PRCM_TCR_DOZE_MODE (1 << 17)
+#define PRCM_UNIPROCLK_MGT 0x278
+#define PRCM_SSPCLK_MGT 0x280
+#define PRCM_RNGCLK_MGT 0x284
+#define PRCM_UICCCLK_MGT 0x27C
+
+#define PRCM_MGT_ENABLE (1 << 8)
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (clk->enabled++ == 0) {
+ if (clk->parent_cluster)
+ __clk_enable(clk->parent_cluster);
+
+ if (clk->parent_periph)
+ __clk_enable(clk->parent_periph);
+
+ if (clk->ops && clk->ops->enable)
+ clk->ops->enable(clk);
+ }
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+ if (--clk->enabled == 0) {
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+
+ if (clk->parent_periph)
+ __clk_disable(clk->parent_periph);
+
+ if (clk->parent_cluster)
+ __clk_disable(clk->parent_cluster);
+ }
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(!clk->enabled);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/*
+ * The MTU has a separate, rather complex muxing setup
+ * with alternative parents (peripheral cluster or
+ * ULP or fixed 32768 Hz) depending on settings
+ */
+static unsigned long clk_mtu_get_rate(struct clk *clk)
+{
+ void __iomem *addr;
+ u32 tcr;
+ int mtu = (int) clk->data;
+ /*
+ * One of these is selected eventually
+ * TODO: Replace the constant with a reference
+ * to the ULP source once this is modeled.
+ */
+ unsigned long clk32k = 32768;
+ unsigned long mturate;
+ unsigned long retclk;
+
+ if (cpu_is_u5500())
+ addr = __io_address(U5500_PRCMU_BASE);
+ else if (cpu_is_u8500())
+ addr = __io_address(U8500_PRCMU_BASE);
+ else
+ ux500_unknown_soc();
+
+ /*
+ * On a startup, always conifgure the TCR to the doze mode;
+ * bootloaders do it for us. Do this in the kernel too.
+ */
+ writel(PRCM_TCR_DOZE_MODE, addr + PRCM_TCR);
+
+ tcr = readl(addr + PRCM_TCR);
+
+ /* Get the rate from the parent as a default */
+ if (clk->parent_periph)
+ mturate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ mturate = clk_get_rate(clk->parent_cluster);
+ else
+ /* We need to be connected SOMEWHERE */
+ BUG();
+
+ /* Return the clock selected for this MTU */
+ if (tcr & (1 << mtu))
+ retclk = clk32k;
+ else
+ retclk = mturate;
+
+ pr_info("MTU%d clock rate: %lu Hz\n", mtu, retclk);
+ return retclk;
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ unsigned long rate;
+
+ /*
+ * If there is a custom getrate callback for this clock,
+ * it will take precedence.
+ */
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
+ if (clk->ops && clk->ops->get_rate)
+ return clk->ops->get_rate(clk);
+
+ rate = clk->rate;
+ if (!rate) {
+ if (clk->parent_periph)
+ rate = clk_get_rate(clk->parent_periph);
+ else if (clk->parent_cluster)
+ rate = clk_get_rate(clk->parent_cluster);
+ }
+
+ return rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ /*TODO*/
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ clk->rate = rate;
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+static void clk_prcmu_enable(struct clk *clk)
+{
+ void __iomem *cg_set_reg = __io_address(U8500_PRCMU_BASE)
+ + PRCM_YYCLKEN0_MGT_SET + clk->prcmu_cg_off;
+
+ writel(1 << clk->prcmu_cg_bit, cg_set_reg);
+}
+
+static void clk_prcmu_disable(struct clk *clk)
+{
+ void __iomem *cg_clr_reg = __io_address(U8500_PRCMU_BASE)
+ + PRCM_YYCLKEN0_MGT_CLR + clk->prcmu_cg_off;
+
+ writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
+}
+
+static struct clkops clk_prcmu_ops = {
+ .enable = clk_prcmu_enable,
+ .disable = clk_prcmu_disable,
+};
+
+static unsigned int clkrst_base[] = {
+ [1] = U8500_CLKRST1_BASE,
+ [2] = U8500_CLKRST2_BASE,
+ [3] = U8500_CLKRST3_BASE,
+ [5] = U8500_CLKRST5_BASE,
+ [6] = U8500_CLKRST6_BASE,
+};
+
+static void clk_prcc_enable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+ if (clk->prcc_kernel != -1)
+ writel(1 << clk->prcc_kernel, addr + PRCC_KCKEN);
+
+ if (clk->prcc_bus != -1)
+ writel(1 << clk->prcc_bus, addr + PRCC_PCKEN);
+}
+
+static void clk_prcc_disable(struct clk *clk)
+{
+ void __iomem *addr = __io_address(clkrst_base[clk->cluster]);
+
+ if (clk->prcc_bus != -1)
+ writel(1 << clk->prcc_bus, addr + PRCC_PCKDIS);
+
+ if (clk->prcc_kernel != -1)
+ writel(1 << clk->prcc_kernel, addr + PRCC_KCKDIS);
+}
+
+static struct clkops clk_prcc_ops = {
+ .enable = clk_prcc_enable,
+ .disable = clk_prcc_disable,
+};
+
+static struct clk clk_32khz = {
+ .name = "clk_32khz",
+ .rate = 32000,
+};
+
+/*
+ * PRCMU level clock gating
+ */
+
+/* Bank 0 */
+static DEFINE_PRCMU_CLK(svaclk, 0x0, 2, SVAMMDSPCLK);
+static DEFINE_PRCMU_CLK(siaclk, 0x0, 3, SIAMMDSPCLK);
+static DEFINE_PRCMU_CLK(sgaclk, 0x0, 4, SGACLK);
+static DEFINE_PRCMU_CLK_RATE(uartclk, 0x0, 5, UARTCLK, 38400000);
+static DEFINE_PRCMU_CLK(msp02clk, 0x0, 6, MSP02CLK);
+static DEFINE_PRCMU_CLK(msp1clk, 0x0, 7, MSP1CLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(i2cclk, 0x0, 8, I2CCLK, 48000000);
+static DEFINE_PRCMU_CLK_RATE(sdmmcclk, 0x0, 9, SDMMCCLK, 100000000);
+static DEFINE_PRCMU_CLK(slimclk, 0x0, 10, SLIMCLK);
+static DEFINE_PRCMU_CLK(per1clk, 0x0, 11, PER1CLK);
+static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
+static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
+static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
+static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
+static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
+static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
+static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
+static DEFINE_PRCMU_CLK(hsirxclk, 0x0, 20, HSIRXCLK);
+static DEFINE_PRCMU_CLK(hdmiclk, 0x0, 21, HDMICLK);
+static DEFINE_PRCMU_CLK(apeatclk, 0x0, 22, APEATCLK);
+static DEFINE_PRCMU_CLK(apetraceclk, 0x0, 23, APETRACECLK);
+static DEFINE_PRCMU_CLK(mcdeclk, 0x0, 24, MCDECLK);
+static DEFINE_PRCMU_CLK(ipi2clk, 0x0, 25, IPI2CCLK);
+static DEFINE_PRCMU_CLK(dsialtclk, 0x0, 26, DSIALTCLK); /* v1 */
+static DEFINE_PRCMU_CLK(dmaclk, 0x0, 27, DMACLK);
+static DEFINE_PRCMU_CLK(b2r2clk, 0x0, 28, B2R2CLK);
+static DEFINE_PRCMU_CLK(tvclk, 0x0, 29, TVCLK);
+static DEFINE_PRCMU_CLK(uniproclk, 0x0, 30, UNIPROCLK); /* v1 */
+static DEFINE_PRCMU_CLK_RATE(sspclk, 0x0, 31, SSPCLK, 48000000); /* v1 */
+
+/* Bank 1 */
+static DEFINE_PRCMU_CLK(rngclk, 0x4, 0, RNGCLK); /* v1 */
+static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
+
+/*
+ * PRCC level clock gating
+ * Format: per#, clk, PCKEN bit, KCKEN bit, parent
+ */
+
+/* Peripheral Cluster #1 */
+static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
+static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
+
+/* Peripheral Cluster #2 */
+static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL);
+static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL);
+static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk);
+
+/* Peripheral Cluster #3 */
+static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
+
+/* Peripheral Cluster #4 is in the always on domain */
+
+/* Peripheral Cluster #5 */
+static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL);
+
+/* Peripheral Cluster #6 */
+
+/* MTU ID in data */
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1);
+static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0);
+static DEFINE_PRCC_CLK(6, cfgreg, 6, 6, NULL);
+static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro, 4, 1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk);
+
+static struct clk clk_dummy_apb_pclk = {
+ .name = "apb_pclk",
+};
+
+static struct clk_lookup u8500_clks[] = {
+ CLK(dummy_apb_pclk, NULL, "apb_pclk"),
+
+ /* Peripheral Cluster #1 */
+ CLK(gpio0, "gpio.0", NULL),
+ CLK(gpio0, "gpio.1", NULL),
+ CLK(slimbus0, "slimbus0", NULL),
+ CLK(i2c2, "nmk-i2c.2", NULL),
+ CLK(sdi0, "sdi0", NULL),
+ CLK(msp0, "msp0", NULL),
+ CLK(i2c1, "nmk-i2c.1", NULL),
+ CLK(uart1, "uart1", NULL),
+ CLK(uart0, "uart0", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(gpio2, "gpio.2", NULL),
+ CLK(gpio2, "gpio.3", NULL),
+ CLK(gpio2, "gpio.4", NULL),
+ CLK(gpio2, "gpio.5", NULL),
+ CLK(sdi5, "sdi5", NULL),
+ CLK(uart2, "uart2", NULL),
+ CLK(ske, "ske", NULL),
+ CLK(ske, "nmk-ske-keypad", NULL),
+ CLK(sdi2, "sdi2", NULL),
+ CLK(i2c0, "nmk-i2c.0", NULL),
+ CLK(fsmc, "fsmc", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(gpio3, "gpio.8", NULL),
+
+ /* Peripheral Cluster #6 */
+ CLK(hash1, "hash1", NULL),
+ CLK(pka, "pka", NULL),
+ CLK(hash0, "hash0", NULL),
+ CLK(cryp0, "cryp0", NULL),
+
+ /* PRCMU level clock gating */
+
+ /* Bank 0 */
+ CLK(svaclk, "sva", NULL),
+ CLK(siaclk, "sia", NULL),
+ CLK(sgaclk, "sga", NULL),
+ CLK(slimclk, "slim", NULL),
+ CLK(lcdclk, "lcd", NULL),
+ CLK(bmlclk, "bml", NULL),
+ CLK(hsitxclk, "stm-hsi.0", NULL),
+ CLK(hsirxclk, "stm-hsi.1", NULL),
+ CLK(hdmiclk, "hdmi", NULL),
+ CLK(apeatclk, "apeat", NULL),
+ CLK(apetraceclk, "apetrace", NULL),
+ CLK(mcdeclk, "mcde", NULL),
+ CLK(ipi2clk, "ipi2", NULL),
+ CLK(dmaclk, "dma40.0", NULL),
+ CLK(b2r2clk, "b2r2", NULL),
+ CLK(tvclk, "tv", NULL),
+
+ /* Peripheral Cluster #1 */
+ CLK(i2c4, "nmk-i2c.4", NULL),
+ CLK(spi3, "spi3", NULL),
+ CLK(msp1, "msp1", NULL),
+
+ /* Peripheral Cluster #2 */
+ CLK(gpio1, "gpio.6", NULL),
+ CLK(gpio1, "gpio.7", NULL),
+ CLK(ssitx, "ssitx", NULL),
+ CLK(ssirx, "ssirx", NULL),
+ CLK(spi0, "spi0", NULL),
+ CLK(sdi3, "sdi3", NULL),
+ CLK(sdi1, "sdi1", NULL),
+ CLK(msp2, "msp2", NULL),
+ CLK(sdi4, "sdi4", NULL),
+ CLK(pwl, "pwl", NULL),
+ CLK(spi1, "spi1", NULL),
+ CLK(spi2, "spi2", NULL),
+ CLK(i2c3, "nmk-i2c.3", NULL),
+
+ /* Peripheral Cluster #3 */
+ CLK(ssp1, "ssp1", NULL),
+ CLK(ssp0, "ssp0", NULL),
+
+ /* Peripheral Cluster #5 */
+ CLK(usb, "musb-ux500.0", "usb"),
+
+ /* Peripheral Cluster #6 */
+ CLK(mtu1, "mtu1", NULL),
+ CLK(mtu0, "mtu0", NULL),
+ CLK(cfgreg, "cfgreg", NULL),
+ CLK(hash1, "hash1", NULL),
+ CLK(unipro, "unipro", NULL),
+ CLK(rng, "rng", NULL),
+
+ /* PRCMU level clock gating */
+
+ /* Bank 0 */
+ CLK(uniproclk, "uniproclk", NULL),
+ CLK(dsialtclk, "dsialt", NULL),
+
+ /* Bank 1 */
+ CLK(rngclk, "rng", NULL),
+ CLK(uiccclk, "uicc", NULL),
+};
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * debugfs support to trace clock tree hierarchy and attributes with
+ * powerdebug
+ */
+static struct dentry *clk_debugfs_root;
+
+void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
+{
+ while (num--) {
+ /* Check that the clock has not been already registered */
+ if (!(cl->clk->list.prev != cl->clk->list.next))
+ list_add_tail(&cl->clk->list, &clk_list);
+
+ cl++;
+ }
+}
+
+static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
+ size_t size, loff_t *off)
+{
+ struct clk *clk = file->f_dentry->d_inode->i_private;
+ char cusecount[128];
+ unsigned int len;
+
+ len = sprintf(cusecount, "%u\n", clk->enabled);
+ return simple_read_from_buffer(buf, size, off, cusecount, len);
+}
+
+static ssize_t rate_dbg_read(struct file *file, char __user *buf,
+ size_t size, loff_t *off)
+{
+ struct clk *clk = file->f_dentry->d_inode->i_private;
+ char crate[128];
+ unsigned int rate;
+ unsigned int len;
+
+ rate = clk_get_rate(clk);
+ len = sprintf(crate, "%u\n", rate);
+ return simple_read_from_buffer(buf, size, off, crate, len);
+}
+
+static const struct file_operations usecount_fops = {
+ .read = usecount_dbg_read,
+};
+
+static const struct file_operations set_rate_fops = {
+ .read = rate_dbg_read,
+};
+
+static struct dentry *clk_debugfs_register_dir(struct clk *c,
+ struct dentry *p_dentry)
+{
+ struct dentry *d, *clk_d;
+ const char *p = c->name;
+
+ if (!p)
+ p = "BUG";
+
+ clk_d = debugfs_create_dir(p, p_dentry);
+ if (!clk_d)
+ return NULL;
+
+ d = debugfs_create_file("usecount", S_IRUGO,
+ clk_d, c, &usecount_fops);
+ if (!d)
+ goto err_out;
+ d = debugfs_create_file("rate", S_IRUGO,
+ clk_d, c, &set_rate_fops);
+ if (!d)
+ goto err_out;
+ /*
+ * TODO : not currently available in ux500
+ * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
+ * if (!d)
+ * goto err_out;
+ */
+
+ return clk_d;
+
+err_out:
+ debugfs_remove_recursive(clk_d);
+ return NULL;
+}
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+ struct clk *pa = c->parent_periph;
+ struct clk *bpa = c->parent_cluster;
+
+ if (!(bpa && !pa)) {
+ c->dent = clk_debugfs_register_dir(c,
+ pa ? pa->dent : clk_debugfs_root);
+ if (!c->dent)
+ return -ENOMEM;
+ }
+
+ if (bpa) {
+ c->dent_bus = clk_debugfs_register_dir(c,
+ bpa->dent_bus ? bpa->dent_bus : bpa->dent);
+ if ((!c->dent_bus) && (c->dent)) {
+ debugfs_remove_recursive(c->dent);
+ c->dent = NULL;
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->parent_periph;
+ struct clk *bpa = c->parent_cluster;
+
+ if (pa && (!pa->dent && !pa->dent_bus)) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (bpa && (!bpa->dent && !bpa->dent_bus)) {
+ err = clk_debugfs_register(bpa);
+ if (err)
+ return err;
+ }
+
+ if ((!c->dent) && (!c->dent_bus)) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clk_list, list) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_DEBUG_FS) */
+
+unsigned long clk_smp_twd_rate = 500000000;
+
+unsigned long clk_smp_twd_get_rate(struct clk *clk)
+{
+ return clk_smp_twd_rate;
+}
+
+static struct clk clk_smp_twd = {
+ .get_rate = clk_smp_twd_get_rate,
+ .name = "smp_twd",
+};
+
+static struct clk_lookup clk_smp_twd_lookup = {
+ .dev_id = "smp_twd",
+ .clk = &clk_smp_twd,
+};
+
+#ifdef CONFIG_CPU_FREQ
+
+static int clk_twd_cpufreq_transition(struct notifier_block *nb,
+ unsigned long state, void *data)
+{
+ struct cpufreq_freqs *f = data;
+
+ if (state == CPUFREQ_PRECHANGE) {
+ /* Save frequency in simple Hz */
+ clk_smp_twd_rate = (f->new * 1000) / 2;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block clk_twd_cpufreq_nb = {
+ .notifier_call = clk_twd_cpufreq_transition,
+};
+
+static int clk_init_smp_twd_cpufreq(void)
+{
+ return cpufreq_register_notifier(&clk_twd_cpufreq_nb,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+late_initcall(clk_init_smp_twd_cpufreq);
+
+#endif
+
+int __init clk_init(void)
+{
+ if (cpu_is_u5500()) {
+ /* Clock tree for U5500 not implemented yet */
+ clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
+ clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
+ clk_uartclk.rate = 36360000;
+ clk_sdmmcclk.rate = 99900000;
+ }
+
+ clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
+ clkdev_add(&clk_smp_twd_lookup);
+
+#ifdef CONFIG_DEBUG_FS
+ clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
+#endif
+ return 0;
+}
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
new file mode 100644
index 00000000000..07449070522
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.h
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson
+ * Copyright (C) 2009 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct clkops - ux500 clock operations
+ * @enable: function to enable the clock
+ * @disable: function to disable the clock
+ * @get_rate: function to get the current clock rate
+ *
+ * This structure contains function pointers to functions that will be used to
+ * control the clock. All of these functions are optional. If get_rate is
+ * NULL, the rate in the struct clk will be used.
+ */
+struct clkops {
+ void (*enable) (struct clk *);
+ void (*disable) (struct clk *);
+ unsigned long (*get_rate) (struct clk *);
+};
+
+/**
+ * struct clk - ux500 clock structure
+ * @ops: pointer to clkops struct used to control this clock
+ * @name: name, for debugging
+ * @enabled: refcount. positive if enabled, zero if disabled
+ * @get_rate: custom callback for getting the clock rate
+ * @data: custom per-clock data for example for the get_rate
+ * callback
+ * @rate: fixed rate for clocks which don't implement
+ * ops->getrate
+ * @prcmu_cg_off: address offset of the combined enable/disable register
+ * (used on u8500v1)
+ * @prcmu_cg_bit: bit in the combined enable/disable register (used on
+ * u8500v1)
+ * @prcmu_cg_mgt: address of the enable/disable register (used on
+ * u8500ed)
+ * @cluster: peripheral cluster number
+ * @prcc_bus: bit for the bus clock in the peripheral's CLKRST
+ * @prcc_kernel: bit for the kernel clock in the peripheral's CLKRST.
+ * -1 if no kernel clock exists.
+ * @parent_cluster: pointer to parent's cluster clk struct
+ * @parent_periph: pointer to parent's peripheral clk struct
+ *
+ * Peripherals are organised into clusters, and each cluster has an associated
+ * bus clock. Some peripherals also have a parent peripheral clock.
+ *
+ * In order to enable a clock for a peripheral, we need to enable:
+ * (1) the parent cluster (bus) clock at the PRCMU level
+ * (2) the parent peripheral clock (if any) at the PRCMU level
+ * (3) the peripheral's bus & kernel clock at the PRCC level
+ *
+ * (1) and (2) are handled by defining clk structs (DEFINE_PRCMU_CLK) for each
+ * of the cluster and peripheral clocks, and hooking these as the parents of
+ * the individual peripheral clocks.
+ *
+ * (3) is handled by specifying the bits in the PRCC control registers required
+ * to enable these clocks and modifying them in the ->enable and
+ * ->disable callbacks of the peripheral clocks (DEFINE_PRCC_CLK).
+ *
+ * This structure describes both the PRCMU-level clocks and PRCC-level clocks.
+ * The prcmu_* fields are only used for the PRCMU clocks, and the cluster,
+ * prcc, and parent pointers are only used for the PRCC-level clocks.
+ */
+struct clk {
+ const struct clkops *ops;
+ const char *name;
+ unsigned int enabled;
+ unsigned long (*get_rate)(struct clk *);
+ void *data;
+
+ unsigned long rate;
+ struct list_head list;
+
+ /* These three are only for PRCMU clks */
+
+ unsigned int prcmu_cg_off;
+ unsigned int prcmu_cg_bit;
+ unsigned int prcmu_cg_mgt;
+
+ /* The rest are only for PRCC clks */
+
+ int cluster;
+ unsigned int prcc_bus;
+ unsigned int prcc_kernel;
+
+ struct clk *parent_cluster;
+ struct clk *parent_periph;
+#if defined(CONFIG_DEBUG_FS)
+ struct dentry *dent; /* For visible tree hierarchy */
+ struct dentry *dent_bus; /* For visible tree hierarchy */
+#endif
+};
+
+#define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcmu_ops, \
+ .prcmu_cg_off = _cg_off, \
+ .prcmu_cg_bit = _cg_bit, \
+ .prcmu_cg_mgt = PRCM_##_reg##_MGT \
+ }
+
+#define DEFINE_PRCMU_CLK_RATE(_name, _cg_off, _cg_bit, _reg, _rate) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcmu_ops, \
+ .prcmu_cg_off = _cg_off, \
+ .prcmu_cg_bit = _cg_bit, \
+ .rate = _rate, \
+ .prcmu_cg_mgt = PRCM_##_reg##_MGT \
+ }
+
+#define DEFINE_PRCC_CLK(_pclust, _name, _bus_en, _kernel_en, _kernclk) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk \
+ }
+
+#define DEFINE_PRCC_CLK_CUSTOM(_pclust, _name, _bus_en, _kernel_en, _kernclk, _callback, _data) \
+struct clk clk_##_name = { \
+ .name = #_name, \
+ .ops = &clk_prcc_ops, \
+ .cluster = _pclust, \
+ .prcc_bus = _bus_en, \
+ .prcc_kernel = _kernel_en, \
+ .parent_cluster = &clk_per##_pclust##clk, \
+ .parent_periph = _kernclk, \
+ .get_rate = _callback, \
+ .data = (void *) _data \
+ }
+
+
+#define CLK(_clk, _devname, _conname) \
+ { \
+ .clk = &clk_##_clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
+int __init clk_db8500_ed_fixup(void);
+int __init clk_init(void);
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
new file mode 100644
index 00000000000..18aa5c05c69
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -0,0 +1,225 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+
+#include <asm/mach/map.h>
+#include <asm/pmu.h>
+
+#include <plat/gpio-nomadik.h>
+
+#include <mach/hardware.h>
+#include <mach/devices.h>
+#include <mach/setup.h>
+#include <mach/irqs.h>
+#include <mach/usb.h>
+
+#include "devices-db5500.h"
+#include "ste-dma40-db5500.h"
+
+static struct map_desc u5500_uart_io_desc[] __initdata = {
+ __IO_DEV_DESC(U5500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_UART2_BASE, SZ_4K),
+};
+
+static struct map_desc u5500_io_desc[] __initdata = {
+ /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+ __IO_DEV_DESC(U5500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_BACKUPRAM0_BASE, SZ_8K),
+
+ __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
+ __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
+};
+
+static struct resource mbox0_resources[] = {
+ {
+ .name = "mbox_peer",
+ .start = U5500_MBOX0_PEER_START,
+ .end = U5500_MBOX0_PEER_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mbox_local",
+ .start = U5500_MBOX0_LOCAL_START,
+ .end = U5500_MBOX0_LOCAL_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mbox_irq",
+ .start = MBOX_PAIR0_VIRT_IRQ,
+ .end = MBOX_PAIR0_VIRT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource mbox1_resources[] = {
+ {
+ .name = "mbox_peer",
+ .start = U5500_MBOX1_PEER_START,
+ .end = U5500_MBOX1_PEER_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mbox_local",
+ .start = U5500_MBOX1_LOCAL_START,
+ .end = U5500_MBOX1_LOCAL_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mbox_irq",
+ .start = MBOX_PAIR1_VIRT_IRQ,
+ .end = MBOX_PAIR1_VIRT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct resource mbox2_resources[] = {
+ {
+ .name = "mbox_peer",
+ .start = U5500_MBOX2_PEER_START,
+ .end = U5500_MBOX2_PEER_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mbox_local",
+ .start = U5500_MBOX2_LOCAL_START,
+ .end = U5500_MBOX2_LOCAL_END,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "mbox_irq",
+ .start = MBOX_PAIR2_VIRT_IRQ,
+ .end = MBOX_PAIR2_VIRT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device mbox0_device = {
+ .id = 0,
+ .name = "mbox",
+ .resource = mbox0_resources,
+ .num_resources = ARRAY_SIZE(mbox0_resources),
+};
+
+static struct platform_device mbox1_device = {
+ .id = 1,
+ .name = "mbox",
+ .resource = mbox1_resources,
+ .num_resources = ARRAY_SIZE(mbox1_resources),
+};
+
+static struct platform_device mbox2_device = {
+ .id = 2,
+ .name = "mbox",
+ .resource = mbox2_resources,
+ .num_resources = ARRAY_SIZE(mbox2_resources),
+};
+
+static struct platform_device *db5500_platform_devs[] __initdata = {
+ &mbox0_device,
+ &mbox1_device,
+ &mbox2_device,
+};
+
+static resource_size_t __initdata db5500_gpio_base[] = {
+ U5500_GPIOBANK0_BASE,
+ U5500_GPIOBANK1_BASE,
+ U5500_GPIOBANK2_BASE,
+ U5500_GPIOBANK3_BASE,
+ U5500_GPIOBANK4_BASE,
+ U5500_GPIOBANK5_BASE,
+ U5500_GPIOBANK6_BASE,
+ U5500_GPIOBANK7_BASE,
+};
+
+static void __init db5500_add_gpios(void)
+{
+ struct nmk_gpio_platform_data pdata = {
+ /* No custom data yet */
+ };
+
+ dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+ IRQ_DB5500_GPIO0, &pdata);
+}
+
+void __init u5500_map_io(void)
+{
+ /*
+ * Map the UARTs early so that the DEBUG_LL stuff continues to work.
+ */
+ iotable_init(u5500_uart_io_desc, ARRAY_SIZE(u5500_uart_io_desc));
+
+ ux500_map_io();
+
+ iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc));
+
+ _PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
+}
+
+static void __init db5500_pmu_init(void)
+{
+ struct resource res[] = {
+ [0] = {
+ .start = IRQ_DB5500_PMU0,
+ .end = IRQ_DB5500_PMU0,
+ .flags = IORESOURCE_IRQ,
+ },
+ [1] = {
+ .start = IRQ_DB5500_PMU1,
+ .end = IRQ_DB5500_PMU1,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
+ res, ARRAY_SIZE(res));
+}
+
+static int usb_db5500_rx_dma_cfg[] = {
+ DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
+ DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
+ DB5500_DMA_DEV6_USB_OTG_IEP_3_11,
+ DB5500_DMA_DEV20_USB_OTG_IEP_4_12,
+ DB5500_DMA_DEV21_USB_OTG_IEP_5_13,
+ DB5500_DMA_DEV22_USB_OTG_IEP_6_14,
+ DB5500_DMA_DEV23_USB_OTG_IEP_7_15,
+ DB5500_DMA_DEV38_USB_OTG_IEP_8
+};
+
+static int usb_db5500_tx_dma_cfg[] = {
+ DB5500_DMA_DEV4_USB_OTG_OEP_1_9,
+ DB5500_DMA_DEV5_USB_OTG_OEP_2_10,
+ DB5500_DMA_DEV6_USB_OTG_OEP_3_11,
+ DB5500_DMA_DEV20_USB_OTG_OEP_4_12,
+ DB5500_DMA_DEV21_USB_OTG_OEP_5_13,
+ DB5500_DMA_DEV22_USB_OTG_OEP_6_14,
+ DB5500_DMA_DEV23_USB_OTG_OEP_7_15,
+ DB5500_DMA_DEV38_USB_OTG_OEP_8
+};
+
+void __init u5500_init_devices(void)
+{
+ db5500_add_gpios();
+ db5500_pmu_init();
+ db5500_dma_init();
+ db5500_add_rtc();
+ db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+
+ platform_add_devices(db5500_platform_devs,
+ ARRAY_SIZE(db5500_platform_devs));
+}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
new file mode 100644
index 00000000000..7176ee7491a
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson SA
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+#include <asm/pmu.h>
+#include <plat/gpio-nomadik.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+#include <mach/usb.h>
+
+#include "devices-db8500.h"
+#include "ste-dma40-db8500.h"
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_uart_io_desc[] __initdata = {
+ __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
+};
+
+static struct map_desc u8500_io_desc[] __initdata = {
+ /* SCU base also covers GIC CPU BASE and TWD with its 4K page */
+ __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+
+ __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
+
+ __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
+ __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
+};
+
+void __init u8500_map_io(void)
+{
+ /*
+ * Map the UARTs early so that the DEBUG_LL stuff continues to work.
+ */
+ iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
+
+ ux500_map_io();
+
+ iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+
+ _PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
+}
+
+static struct resource db8500_pmu_resources[] = {
+ [0] = {
+ .start = IRQ_DB8500_PMU,
+ .end = IRQ_DB8500_PMU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * The PMU IRQ lines of two cores are wired together into a single interrupt.
+ * Bounce the interrupt to the other core if it's not ours.
+ */
+static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
+{
+ irqreturn_t ret = handler(irq, dev);
+ int other = !smp_processor_id();
+
+ if (ret == IRQ_NONE && cpu_online(other))
+ irq_set_affinity(irq, cpumask_of(other));
+
+ /*
+ * We should be able to get away with the amount of IRQ_NONEs we give,
+ * while still having the spurious IRQ detection code kick in if the
+ * interrupt really starts hitting spuriously.
+ */
+ return ret;
+}
+
+static struct arm_pmu_platdata db8500_pmu_platdata = {
+ .handle_irq = db8500_pmu_handler,
+};
+
+static struct platform_device db8500_pmu_device = {
+ .name = "arm-pmu",
+ .id = ARM_PMU_DEVICE_CPU,
+ .num_resources = ARRAY_SIZE(db8500_pmu_resources),
+ .resource = db8500_pmu_resources,
+ .dev.platform_data = &db8500_pmu_platdata,
+};
+
+static struct platform_device db8500_prcmu_device = {
+ .name = "db8500-prcmu",
+};
+
+static struct platform_device *platform_devs[] __initdata = {
+ &u8500_dma40_device,
+ &db8500_pmu_device,
+ &db8500_prcmu_device,
+};
+
+static resource_size_t __initdata db8500_gpio_base[] = {
+ U8500_GPIOBANK0_BASE,
+ U8500_GPIOBANK1_BASE,
+ U8500_GPIOBANK2_BASE,
+ U8500_GPIOBANK3_BASE,
+ U8500_GPIOBANK4_BASE,
+ U8500_GPIOBANK5_BASE,
+ U8500_GPIOBANK6_BASE,
+ U8500_GPIOBANK7_BASE,
+ U8500_GPIOBANK8_BASE,
+};
+
+static void __init db8500_add_gpios(void)
+{
+ struct nmk_gpio_platform_data pdata = {
+ .supports_sleepmode = true,
+ };
+
+ dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+ IRQ_DB8500_GPIO0, &pdata);
+}
+
+static int usb_db8500_rx_dma_cfg[] = {
+ DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
+ DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
+ DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
+ DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
+ DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
+ DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
+ DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
+ DB8500_DMA_DEV39_USB_OTG_IEP_8
+};
+
+static int usb_db8500_tx_dma_cfg[] = {
+ DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
+ DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
+ DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
+ DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
+ DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
+ DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
+ DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
+ DB8500_DMA_DEV39_USB_OTG_OEP_8
+};
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+ db8500_add_rtc();
+ db8500_add_gpios();
+ db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+
+ platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+ return ;
+}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
new file mode 100644
index 00000000000..f4185749437
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/db5500-prcmu.h>
+#include <linux/clksrc-dbx500-prcmu.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/localtimer.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+
+#include "clock.h"
+
+void __iomem *_PRCMU_BASE;
+
+void __init ux500_init_irq(void)
+{
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (cpu_is_u5500()) {
+ dist_base = __io_address(U5500_GIC_DIST_BASE);
+ cpu_base = __io_address(U5500_GIC_CPU_BASE);
+ } else if (cpu_is_u8500()) {
+ dist_base = __io_address(U8500_GIC_DIST_BASE);
+ cpu_base = __io_address(U8500_GIC_CPU_BASE);
+ } else
+ ux500_unknown_soc();
+
+ gic_init(0, 29, dist_base, cpu_base);
+
+ /*
+ * Init clocks here so that they are available for system timer
+ * initialization.
+ */
+ if (cpu_is_u5500())
+ db5500_prcmu_early_init();
+ if (cpu_is_u8500())
+ db8500_prcmu_early_init();
+ clk_init();
+}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
new file mode 100644
index 00000000000..c563e5418d8
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+
+#include <plat/gpio-nomadik.h>
+
+#include <mach/hardware.h>
+
+#include "devices-common.h"
+
+struct amba_device *
+dbx500_add_amba_device(const char *name, resource_size_t base,
+ int irq, void *pdata, unsigned int periphid)
+{
+ struct amba_device *dev;
+ int ret;
+
+ dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ dev->dev.init_name = name;
+
+ dev->res.start = base;
+ dev->res.end = base + SZ_4K - 1;
+ dev->res.flags = IORESOURCE_MEM;
+
+ dev->dma_mask = DMA_BIT_MASK(32);
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+ dev->irq[0] = irq;
+ dev->irq[1] = NO_IRQ;
+
+ dev->periphid = periphid;
+
+ dev->dev.platform_data = pdata;
+
+ ret = amba_device_register(dev, &iomem_resource);
+ if (ret) {
+ kfree(dev);
+ return ERR_PTR(ret);
+ }
+
+ return dev;
+}
+
+static struct platform_device *
+dbx500_add_platform_device(const char *name, int id, void *pdata,
+ struct resource *res, int resnum)
+{
+ struct platform_device *dev;
+ int ret;
+
+ dev = platform_device_alloc(name, id);
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+
+ ret = platform_device_add_resources(dev, res, resnum);
+ if (ret)
+ goto out_free;
+
+ dev->dev.platform_data = pdata;
+
+ ret = platform_device_add(dev);
+ if (ret)
+ goto out_free;
+
+ return dev;
+
+out_free:
+ platform_device_put(dev);
+ return ERR_PTR(ret);
+}
+
+struct platform_device *
+dbx500_add_platform_device_4k1irq(const char *name, int id,
+ resource_size_t base,
+ int irq, void *pdata)
+{
+ struct resource resources[] = {
+ [0] = {
+ .start = base,
+ .end = base + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return dbx500_add_platform_device(name, id, pdata, resources,
+ ARRAY_SIZE(resources));
+}
+
+static struct platform_device *
+dbx500_add_gpio(int id, resource_size_t addr, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ struct resource resources[] = {
+ {
+ .start = addr,
+ .end = addr + 127,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = irq,
+ .end = irq,
+ .flags = IORESOURCE_IRQ,
+ }
+ };
+
+ return platform_device_register_resndata(NULL, "gpio", id,
+ resources, ARRAY_SIZE(resources),
+ pdata, sizeof(*pdata));
+}
+
+void dbx500_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata)
+{
+ int first = 0;
+ int i;
+
+ for (i = 0; i < num; i++, first += 32, irq++) {
+ pdata->first_gpio = first;
+ pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+ pdata->num_gpio = 32;
+
+ dbx500_add_gpio(i, base[i], irq, pdata);
+ }
+}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
new file mode 100644
index 00000000000..7825705033b
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_COMMON_H
+#define __DEVICES_COMMON_H
+
+extern struct amba_device *
+dbx500_add_amba_device(const char *name, resource_size_t base,
+ int irq, void *pdata, unsigned int periphid);
+
+extern struct platform_device *
+dbx500_add_platform_device_4k1irq(const char *name, int id,
+ resource_size_t base,
+ int irq, void *pdata);
+
+struct spi_master_cntlr;
+
+static inline struct amba_device *
+dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+ struct spi_master_cntlr *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+static inline struct amba_device *
+dbx500_add_spi(const char *name, resource_size_t base, int irq,
+ struct spi_master_cntlr *pdata,
+ u32 periphid)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+}
+
+struct mmci_platform_data;
+
+static inline struct amba_device *
+dbx500_add_sdi(const char *name, resource_size_t base, int irq,
+ struct mmci_platform_data *pdata,
+ u32 periphid)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+}
+
+struct amba_pl011_data;
+
+static inline struct amba_device *
+dbx500_add_uart(const char *name, resource_size_t base, int irq,
+ struct amba_pl011_data *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+struct nmk_i2c_controller;
+
+static inline struct platform_device *
+dbx500_add_i2c(int id, resource_size_t base, int irq,
+ struct nmk_i2c_controller *pdata)
+{
+ return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
+ pdata);
+}
+
+struct msp_i2s_platform_data;
+
+static inline struct platform_device *
+dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
+ struct msp_i2s_platform_data *pdata)
+{
+ return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
+ pdata);
+}
+
+static inline struct amba_device *
+dbx500_add_rtc(resource_size_t base, int irq)
+{
+ return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+}
+
+struct nmk_gpio_platform_data;
+
+void dbx500_add_gpios(resource_size_t *base, int num, int irq,
+ struct nmk_gpio_platform_data *pdata);
+
+#endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
new file mode 100644
index 00000000000..0c4bccd02b9
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_DB5500_H
+#define __DEVICES_DB5500_H
+
+#include "devices-common.h"
+
+#define db5500_add_i2c1(pdata) \
+ dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(pdata) \
+ dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(pdata) \
+ dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+
+#define db5500_add_msp0_i2s(pdata) \
+ dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_i2s(pdata) \
+ dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_i2s(pdata) \
+ dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+
+#define db5500_add_msp0_spi(pdata) \
+ dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(pdata) \
+ dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(pdata) \
+ dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+
+#define db5500_add_rtc() \
+ dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+
+#define db5500_add_usb(rx_cfg, tx_cfg) \
+ ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+
+#define db5500_add_sdi0(pdata) \
+ dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+ 0x10480180)
+#define db5500_add_sdi1(pdata) \
+ dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+ 0x10480180)
+#define db5500_add_sdi2(pdata) \
+ dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+ 0x10480180)
+#define db5500_add_sdi3(pdata) \
+ dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+ 0x10480180)
+#define db5500_add_sdi4(pdata) \
+ dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+ 0x10480180)
+
+/* This one has a bad peripheral ID in the U5500 silicon */
+#define db5500_add_spi0(pdata) \
+ dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+ 0x10080023)
+#define db5500_add_spi1(pdata) \
+ dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+ 0x10080023)
+#define db5500_add_spi2(pdata) \
+ dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+ 0x10080023)
+#define db5500_add_spi3(pdata) \
+ dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+ 0x10080023)
+
+#define db5500_add_uart0(plat) \
+ dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(plat) \
+ dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(plat) \
+ dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(plat) \
+ dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+
+#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
new file mode 100644
index 00000000000..a7c6cdc9b11
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+
+#include <plat/ste_dma40.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#include "ste-dma40-db8500.h"
+
+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U8500_DMA_BASE,
+ .end = U8500_DMA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U8500_DMA_LCPA_BASE,
+ .end = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = IRQ_DB8500_DMA,
+ .end = IRQ_DB8500_DMA,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* Default configuration for physcial memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .mode = STEDMA40_MODE_PHYSICAL,
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+/* Default configuration for logical memcpy */
+struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/*
+ * Mapping between destination event lines and physical device address.
+ * The event line is tied to a device and therefore the address is constant.
+ * When the address comes from a primecell it will be configured in runtime
+ * and we set the address to -1 as a placeholder.
+ */
+static const dma_addr_t dma40_tx_map[DB8500_DMA_NR_DEV] = {
+ /* MUSB - these will be runtime-reconfigured */
+ [DB8500_DMA_DEV39_USB_OTG_OEP_8] = -1,
+ [DB8500_DMA_DEV16_USB_OTG_OEP_7_15] = -1,
+ [DB8500_DMA_DEV17_USB_OTG_OEP_6_14] = -1,
+ [DB8500_DMA_DEV18_USB_OTG_OEP_5_13] = -1,
+ [DB8500_DMA_DEV19_USB_OTG_OEP_4_12] = -1,
+ [DB8500_DMA_DEV36_USB_OTG_OEP_3_11] = -1,
+ [DB8500_DMA_DEV37_USB_OTG_OEP_2_10] = -1,
+ [DB8500_DMA_DEV38_USB_OTG_OEP_1_9] = -1,
+ /* PrimeCells - run-time configured */
+ [DB8500_DMA_DEV0_SPI0_TX] = -1,
+ [DB8500_DMA_DEV1_SD_MMC0_TX] = -1,
+ [DB8500_DMA_DEV2_SD_MMC1_TX] = -1,
+ [DB8500_DMA_DEV3_SD_MMC2_TX] = -1,
+ [DB8500_DMA_DEV8_SSP0_TX] = -1,
+ [DB8500_DMA_DEV9_SSP1_TX] = -1,
+ [DB8500_DMA_DEV11_UART2_TX] = -1,
+ [DB8500_DMA_DEV12_UART1_TX] = -1,
+ [DB8500_DMA_DEV13_UART0_TX] = -1,
+ [DB8500_DMA_DEV28_SD_MM2_TX] = -1,
+ [DB8500_DMA_DEV29_SD_MM0_TX] = -1,
+ [DB8500_DMA_DEV32_SD_MM1_TX] = -1,
+ [DB8500_DMA_DEV33_SPI2_TX] = -1,
+ [DB8500_DMA_DEV35_SPI1_TX] = -1,
+ [DB8500_DMA_DEV40_SPI3_TX] = -1,
+ [DB8500_DMA_DEV41_SD_MM3_TX] = -1,
+ [DB8500_DMA_DEV42_SD_MM4_TX] = -1,
+ [DB8500_DMA_DEV43_SD_MM5_TX] = -1,
+};
+
+/* Mapping between source event lines and physical device address */
+static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
+ /* MUSB - these will be runtime-reconfigured */
+ [DB8500_DMA_DEV39_USB_OTG_IEP_8] = -1,
+ [DB8500_DMA_DEV16_USB_OTG_IEP_7_15] = -1,
+ [DB8500_DMA_DEV17_USB_OTG_IEP_6_14] = -1,
+ [DB8500_DMA_DEV18_USB_OTG_IEP_5_13] = -1,
+ [DB8500_DMA_DEV19_USB_OTG_IEP_4_12] = -1,
+ [DB8500_DMA_DEV36_USB_OTG_IEP_3_11] = -1,
+ [DB8500_DMA_DEV37_USB_OTG_IEP_2_10] = -1,
+ [DB8500_DMA_DEV38_USB_OTG_IEP_1_9] = -1,
+ /* PrimeCells */
+ [DB8500_DMA_DEV0_SPI0_RX] = -1,
+ [DB8500_DMA_DEV1_SD_MMC0_RX] = -1,
+ [DB8500_DMA_DEV2_SD_MMC1_RX] = -1,
+ [DB8500_DMA_DEV3_SD_MMC2_RX] = -1,
+ [DB8500_DMA_DEV8_SSP0_RX] = -1,
+ [DB8500_DMA_DEV9_SSP1_RX] = -1,
+ [DB8500_DMA_DEV11_UART2_RX] = -1,
+ [DB8500_DMA_DEV12_UART1_RX] = -1,
+ [DB8500_DMA_DEV13_UART0_RX] = -1,
+ [DB8500_DMA_DEV28_SD_MM2_RX] = -1,
+ [DB8500_DMA_DEV29_SD_MM0_RX] = -1,
+ [DB8500_DMA_DEV32_SD_MM1_RX] = -1,
+ [DB8500_DMA_DEV33_SPI2_RX] = -1,
+ [DB8500_DMA_DEV35_SPI1_RX] = -1,
+ [DB8500_DMA_DEV40_SPI3_RX] = -1,
+ [DB8500_DMA_DEV41_SD_MM3_RX] = -1,
+ [DB8500_DMA_DEV42_SD_MM4_RX] = -1,
+ [DB8500_DMA_DEV43_SD_MM5_RX] = -1,
+};
+
+/* Reserved event lines for memcpy only */
+static int dma40_memcpy_event[] = {
+ DB8500_DMA_MEMCPY_TX_0,
+ DB8500_DMA_MEMCPY_TX_1,
+ DB8500_DMA_MEMCPY_TX_2,
+ DB8500_DMA_MEMCPY_TX_3,
+ DB8500_DMA_MEMCPY_TX_4,
+ DB8500_DMA_MEMCPY_TX_5,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = DB8500_DMA_NR_DEV,
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .disabled_channels = {-1},
+};
+
+struct platform_device u8500_dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+struct resource keypad_resources[] = {
+ [0] = {
+ .start = U8500_SKE_BASE,
+ .end = U8500_SKE_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_DB8500_KB,
+ .end = IRQ_DB8500_KB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device u8500_ske_keypad_device = {
+ .name = "nmk-ske-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(keypad_resources),
+ .resource = keypad_resources,
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
new file mode 100644
index 00000000000..cbd4a9ae810
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -0,0 +1,101 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_DB8500_H
+#define __DEVICES_DB8500_H
+
+#include "devices-common.h"
+
+struct ske_keypad_platform_data;
+struct pl022_ssp_controller;
+
+static inline struct platform_device *
+db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+{
+ return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
+ U8500_SKE_BASE,
+ IRQ_DB8500_KB, pdata);
+}
+
+static inline struct amba_device *
+db8500_add_ssp(const char *name, resource_size_t base, int irq,
+ struct pl022_ssp_controller *pdata)
+{
+ return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+
+#define db8500_add_i2c0(pdata) \
+ dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(pdata) \
+ dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(pdata) \
+ dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(pdata) \
+ dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(pdata) \
+ dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(pdata) \
+ dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(pdata) \
+ dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(pdata) \
+ dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(pdata) \
+ dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(pdata) \
+ dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(pdata) \
+ dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(pdata) \
+ dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(pdata) \
+ dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc() \
+ dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(rx_cfg, tx_cfg) \
+ ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(pdata, pid) \
+ dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(pdata, pid) \
+ dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(pdata, pid) \
+ dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(pdata, pid) \
+ dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(pdata, pid) \
+ dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(pdata, pid) \
+ dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(pdata) \
+ db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(pdata) \
+ db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(pdata) \
+ dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(pdata) \
+ dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(pdata) \
+ dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(pdata) \
+ dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(pdata) \
+ dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(pdata) \
+ dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(pdata) \
+ dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+
+#endif
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
new file mode 100644
index 00000000000..ea0a2f92ca7
--- /dev/null
+++ b/arch/arm/mach-ux500/devices.c
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+void __init amba_add_devices(struct amba_device *devs[], int num)
+{
+ int i;
+
+ for (i = 0; i < num; i++) {
+ struct amba_device *d = devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+}
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
new file mode 100644
index 00000000000..1cfab68ae41
--- /dev/null
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/ste_dma40.h>
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+#include "ste-dma40-db5500.h"
+
+static struct resource dma40_resources[] = {
+ [0] = {
+ .start = U5500_DMA_BASE,
+ .end = U5500_DMA_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "base",
+ },
+ [1] = {
+ .start = U5500_DMA_LCPA_BASE,
+ .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ .name = "lcpa",
+ },
+ [2] = {
+ .start = IRQ_DB5500_DMA,
+ .end = IRQ_DB5500_DMA,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+/* Default configuration for physical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+ .mode = STEDMA40_MODE_PHYSICAL,
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_PHY_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_PHY_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/* Default configuration for logical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+ .dir = STEDMA40_MEM_TO_MEM,
+
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/*
+ * Mapping between soruce event lines and physical device address This was
+ * created assuming that the event line is tied to a device and therefore the
+ * address is constant, however this is not true for at least USB, and the
+ * values are just placeholders for USB. This table is preserved and used for
+ * now.
+ */
+static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
+ [DB5500_DMA_DEV24_SDMMC0_RX] = -1,
+ [DB5500_DMA_DEV38_USB_OTG_IEP_8] = -1,
+ [DB5500_DMA_DEV23_USB_OTG_IEP_7_15] = -1,
+ [DB5500_DMA_DEV22_USB_OTG_IEP_6_14] = -1,
+ [DB5500_DMA_DEV21_USB_OTG_IEP_5_13] = -1,
+ [DB5500_DMA_DEV20_USB_OTG_IEP_4_12] = -1,
+ [DB5500_DMA_DEV6_USB_OTG_IEP_3_11] = -1,
+ [DB5500_DMA_DEV5_USB_OTG_IEP_2_10] = -1,
+ [DB5500_DMA_DEV4_USB_OTG_IEP_1_9] = -1,
+};
+
+/* Mapping between destination event lines and physical device address */
+static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
+ [DB5500_DMA_DEV24_SDMMC0_TX] = -1,
+ [DB5500_DMA_DEV38_USB_OTG_OEP_8] = -1,
+ [DB5500_DMA_DEV23_USB_OTG_OEP_7_15] = -1,
+ [DB5500_DMA_DEV22_USB_OTG_OEP_6_14] = -1,
+ [DB5500_DMA_DEV21_USB_OTG_OEP_5_13] = -1,
+ [DB5500_DMA_DEV20_USB_OTG_OEP_4_12] = -1,
+ [DB5500_DMA_DEV6_USB_OTG_OEP_3_11] = -1,
+ [DB5500_DMA_DEV5_USB_OTG_OEP_2_10] = -1,
+ [DB5500_DMA_DEV4_USB_OTG_OEP_1_9] = -1,
+};
+
+static int dma40_memcpy_event[] = {
+ DB5500_DMA_MEMCPY_TX_1,
+ DB5500_DMA_MEMCPY_TX_2,
+ DB5500_DMA_MEMCPY_TX_3,
+ DB5500_DMA_MEMCPY_TX_4,
+ DB5500_DMA_MEMCPY_TX_5,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+ .dev_len = ARRAY_SIZE(dma40_rx_map),
+ .dev_rx = dma40_rx_map,
+ .dev_tx = dma40_tx_map,
+ .memcpy = dma40_memcpy_event,
+ .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
+ .memcpy_conf_phy = &dma40_memcpy_conf_phy,
+ .memcpy_conf_log = &dma40_memcpy_conf_log,
+ .disabled_channels = {-1},
+};
+
+static struct platform_device dma40_device = {
+ .dev = {
+ .platform_data = &dma40_plat_data,
+ },
+ .name = "dma40",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(dma40_resources),
+ .resource = dma40_resources
+};
+
+void __init db5500_dma_init(void)
+{
+ int ret;
+
+ ret = platform_device_register(&dma40_device);
+ if (ret)
+ dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
+
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 00000000000..08da5589bcd
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson
+ * This file is based ARM Realview platform
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ __INIT
+
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #15
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ add r6, r6, r4
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+ENDPROC(u8500_secondary_startup)
+
+ .align 2
+1: .long .
+ .long pen_release
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
new file mode 100644
index 00000000000..c76f0f456f0
--- /dev/null
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Based on ARM realview platform
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+
+extern volatile int pen_release;
+
+static inline void platform_do_lowpower(unsigned int cpu)
+{
+ flush_cache_all();
+
+ /* we put the platform to just WFI */
+ for (;;) {
+ __asm__ __volatile__("dsb\n\t" "wfi\n\t"
+ : : : "memory");
+ if (pen_release == cpu_logical_map(cpu)) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+ }
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+ /* directly enter low power state, skipping secure registers */
+ platform_do_lowpower(cpu);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+ /*
+ * we don't allow CPU 0 to be shutdown (it is still too special
+ * e.g. clock tick interrupts)
+ */
+ return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
new file mode 100644
index 00000000000..15a0f63b2e2
--- /dev/null
+++ b/arch/arm/mach-ux500/id.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+struct dbx500_asic_id dbx500_id;
+
+static unsigned int ux500_read_asicid(phys_addr_t addr)
+{
+ phys_addr_t base = addr & ~0xfff;
+ struct map_desc desc = {
+ .virtual = IO_ADDRESS(base),
+ .pfn = __phys_to_pfn(base),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ };
+
+ iotable_init(&desc, 1);
+
+ /* As in devicemaps_init() */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ return readl(__io_address(addr));
+}
+
+static void ux500_print_soc_info(unsigned int asicid)
+{
+ unsigned int rev = dbx500_revision();
+
+ pr_info("DB%4x ", dbx500_partnumber());
+
+ if (rev == 0x01)
+ pr_cont("Early Drop");
+ else if (rev >= 0xA0)
+ pr_cont("v%d.%d" , (rev >> 4) - 0xA + 1, rev & 0xf);
+ else
+ pr_cont("Unknown");
+
+ pr_cont(" [%#010x]\n", asicid);
+}
+
+static unsigned int partnumber(unsigned int asicid)
+{
+ return (asicid >> 8) & 0xffff;
+}
+
+/*
+ * SOC MIDR ASICID ADDRESS ASICID VALUE
+ * DB8500ed 0x410fc090 0x9001FFF4 0x00850001
+ * DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
+ * DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
+ * DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
+ * DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
+ * DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
+ */
+
+void __init ux500_map_io(void)
+{
+ unsigned int cpuid = read_cpuid_id();
+ unsigned int asicid = 0;
+ phys_addr_t addr = 0;
+
+ switch (cpuid) {
+ case 0x410fc090: /* DB8500ed */
+ case 0x411fc091: /* DB8500v1 */
+ addr = 0x9001FFF4;
+ break;
+
+ case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
+ asicid = ux500_read_asicid(0x9001DBF4);
+ if (partnumber(asicid) == 0x8500 ||
+ partnumber(asicid) == 0x8520)
+ /* DB8500v2 */
+ break;
+
+ /* DB5500v1 */
+ addr = 0x9001FFF4;
+ break;
+ }
+
+ if (addr)
+ asicid = ux500_read_asicid(addr);
+
+ if (!asicid) {
+ pr_err("Unable to identify SoC\n");
+ ux500_unknown_soc();
+ }
+
+ dbx500_id.process = asicid >> 24;
+ dbx500_id.partnumber = partnumber(asicid);
+ dbx500_id.revision = asicid & 0xff;
+
+ ux500_print_soc_info(asicid);
+}
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
new file mode 100644
index 00000000000..8e714bcb099
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB5500_REGS_H
+#define __MACH_DB5500_REGS_H
+
+#define U5500_PER1_BASE 0xA0020000
+#define U5500_PER2_BASE 0xA0010000
+#define U5500_PER3_BASE 0x80140000
+#define U5500_PER4_BASE 0x80150000
+#define U5500_PER5_BASE 0x80100000
+#define U5500_PER6_BASE 0x80120000
+
+#define U5500_GIC_DIST_BASE 0xA0411000
+#define U5500_GIC_CPU_BASE 0xA0410100
+#define U5500_DMA_BASE 0x90030000
+#define U5500_STM_BASE 0x90020000
+#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000)
+#define U5500_MCDE_BASE 0xA0400000
+#define U5500_MODEM_BASE 0xB0000000
+#define U5500_L2CC_BASE 0xA0412000
+#define U5500_SCU_BASE 0xA0410000
+#define U5500_DSI1_BASE 0xA0401000
+#define U5500_DSI2_BASE 0xA0402000
+#define U5500_SIA_BASE 0xA0100000
+#define U5500_SVA_BASE 0x80200000
+#define U5500_HSEM_BASE 0xA0000000
+#define U5500_NAND0_BASE 0x60000000
+#define U5500_NAND1_BASE 0x70000000
+#define U5500_TWD_BASE 0xa0410600
+#define U5500_ICN_BASE 0xA0040000
+#define U5500_B2R2_BASE 0xa0200000
+#define U5500_BOOT_ROM_BASE 0x90000000
+
+#define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000)
+#define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000)
+#define U5500_SDI2_BASE (U5500_PER1_BASE + 0x2000)
+#define U5500_UART0_BASE (U5500_PER1_BASE + 0x3000)
+#define U5500_I2C1_BASE (U5500_PER1_BASE + 0x4000)
+#define U5500_MSP0_BASE (U5500_PER1_BASE + 0x5000)
+#define U5500_GPIO0_BASE (U5500_PER1_BASE + 0xE000)
+#define U5500_CLKRST1_BASE (U5500_PER1_BASE + 0xF000)
+
+#define U5500_USBOTG_BASE (U5500_PER2_BASE + 0x0000)
+#define U5500_GPIO1_BASE (U5500_PER2_BASE + 0xE000)
+#define U5500_CLKRST2_BASE (U5500_PER2_BASE + 0xF000)
+
+#define U5500_KEYPAD_BASE (U5500_PER3_BASE + 0x0000)
+#define U5500_PWM_BASE (U5500_PER3_BASE + 0x1000)
+#define U5500_GPIO3_BASE (U5500_PER3_BASE + 0xE000)
+#define U5500_CLKRST3_BASE (U5500_PER3_BASE + 0xF000)
+
+#define U5500_BACKUPRAM0_BASE (U5500_PER4_BASE + 0x0000)
+#define U5500_BACKUPRAM1_BASE (U5500_PER4_BASE + 0x1000)
+#define U5500_RTT0_BASE (U5500_PER4_BASE + 0x2000)
+#define U5500_RTT1_BASE (U5500_PER4_BASE + 0x3000)
+#define U5500_RTC_BASE (U5500_PER4_BASE + 0x4000)
+#define U5500_SCR_BASE (U5500_PER4_BASE + 0x5000)
+#define U5500_DMC_BASE (U5500_PER4_BASE + 0x6000)
+#define U5500_PRCMU_BASE (U5500_PER4_BASE + 0x7000)
+#define U5500_PRCMU_TIMER_3_BASE (U5500_PER4_BASE + 0x07338)
+#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
+#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
+#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
+#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000)
+#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
+#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)
+#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000)
+#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000)
+
+#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
+#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
+#define U5500_SPI2_BASE (U5500_PER5_BASE + 0x2000)
+#define U5500_SPI3_BASE (U5500_PER5_BASE + 0x3000)
+#define U5500_UART1_BASE (U5500_PER5_BASE + 0x4000)
+#define U5500_UART2_BASE (U5500_PER5_BASE + 0x5000)
+#define U5500_UART3_BASE (U5500_PER5_BASE + 0x6000)
+#define U5500_SDI1_BASE (U5500_PER5_BASE + 0x7000)
+#define U5500_SDI3_BASE (U5500_PER5_BASE + 0x8000)
+#define U5500_SDI4_BASE (U5500_PER5_BASE + 0x9000)
+#define U5500_I2C2_BASE (U5500_PER5_BASE + 0xA000)
+#define U5500_I2C3_BASE (U5500_PER5_BASE + 0xB000)
+#define U5500_MSP2_BASE (U5500_PER5_BASE + 0xC000)
+#define U5500_IRDA_BASE (U5500_PER5_BASE + 0xD000)
+#define U5500_IRRC_BASE (U5500_PER5_BASE + 0x10000)
+#define U5500_GPIO4_BASE (U5500_PER5_BASE + 0x1E000)
+#define U5500_CLKRST5_BASE (U5500_PER5_BASE + 0x1F000)
+
+#define U5500_RNG_BASE (U5500_PER6_BASE + 0x0000)
+#define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000)
+#define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000)
+#define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000)
+#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100)
+#define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000)
+#define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000)
+#define U5500_CR_BASE (U5500_PER6_BASE + 0x8000)
+#define U5500_CRYP0_BASE (U5500_PER6_BASE + 0xA000)
+#define U5500_CRYP1_BASE (U5500_PER6_BASE + 0xB000)
+#define U5500_CLKRST6_BASE (U5500_PER6_BASE + 0xF000)
+
+#define U5500_GPIOBANK0_BASE U5500_GPIO0_BASE
+#define U5500_GPIOBANK1_BASE (U5500_GPIO0_BASE + 0x80)
+#define U5500_GPIOBANK2_BASE U5500_GPIO1_BASE
+#define U5500_GPIOBANK3_BASE U5500_GPIO2_BASE
+#define U5500_GPIOBANK4_BASE U5500_GPIO3_BASE
+#define U5500_GPIOBANK5_BASE U5500_GPIO4_BASE
+#define U5500_GPIOBANK6_BASE (U5500_GPIO4_BASE + 0x80)
+#define U5500_GPIOBANK7_BASE (U5500_GPIO4_BASE + 0x100)
+
+#define U5500_MBOX_BASE (U5500_MODEM_BASE + 0xFFD1000)
+#define U5500_MBOX0_PEER_START (U5500_MBOX_BASE + 0x40)
+#define U5500_MBOX0_PEER_END (U5500_MBOX_BASE + 0x5F)
+#define U5500_MBOX0_LOCAL_START (U5500_MBOX_BASE + 0x60)
+#define U5500_MBOX0_LOCAL_END (U5500_MBOX_BASE + 0x7F)
+#define U5500_MBOX1_PEER_START (U5500_MBOX_BASE + 0x80)
+#define U5500_MBOX1_PEER_END (U5500_MBOX_BASE + 0x9F)
+#define U5500_MBOX1_LOCAL_START (U5500_MBOX_BASE + 0xA0)
+#define U5500_MBOX1_LOCAL_END (U5500_MBOX_BASE + 0xBF)
+#define U5500_MBOX2_PEER_START (U5500_MBOX_BASE + 0x00)
+#define U5500_MBOX2_PEER_END (U5500_MBOX_BASE + 0x1F)
+#define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20)
+#define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F)
+
+#define U5500_ACCCON_BASE_SEC (0xBFFF0000)
+#define U5500_ACCCON_BASE (0xBFFF1000)
+#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
+#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
+#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4)
+
+#define U5500_ESRAM_BASE 0x40000000
+#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000
+#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
+
+#define U5500_MCDE_SIZE 0x1000
+#define U5500_DSI_LINK_SIZE 0x1000
+#define U5500_DSI_LINK_COUNT 0x2
+#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE)
+#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
new file mode 100644
index 00000000000..80e10f50282
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_DB8500_REGS_H
+#define __MACH_DB8500_REGS_H
+
+/* Base address and bank offsets for ESRAM */
+#define U8500_ESRAM_BASE 0x40000000
+#define U8500_ESRAM_BANK_SIZE 0x00020000
+#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE
+#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE)
+#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE)
+/*
+ * on V1 DMA uses 4KB for logical parameters position is right after the 64KB
+ * reserved for security
+ */
+#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000
+
+#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
+
+/* This address fulfills the 256k alignment requirement of the lcla base */
+#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
+
+#define U8500_PER3_BASE 0x80000000
+#define U8500_STM_BASE 0x80100000
+#define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000)
+#define U8500_PER2_BASE 0x80110000
+#define U8500_PER1_BASE 0x80120000
+#define U8500_B2R2_BASE 0x80130000
+#define U8500_HSEM_BASE 0x80140000
+#define U8500_PER4_BASE 0x80150000
+#define U8500_TPIU_BASE 0x80190000
+#define U8500_ICN_BASE 0x81000000
+
+#define U8500_BOOT_ROM_BASE 0x90000000
+/* ASIC ID is at 0xbf4 offset within this region */
+#define U8500_ASIC_ID_BASE 0x9001D000
+
+#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER7_BASE 0xa03d0000
+#define U8500_PER5_BASE 0xa03e0000
+
+#define U8500_SVA_BASE 0xa0100000
+#define U8500_SIA_BASE 0xa0200000
+
+#define U8500_SGA_BASE 0xa0300000
+#define U8500_MCDE_BASE 0xa0350000
+#define U8500_DMA_BASE 0x801C0000 /* v1 */
+
+#define U8500_SBAG_BASE 0xa0390000
+
+#define U8500_SCU_BASE 0xa0410000
+#define U8500_GIC_CPU_BASE 0xa0410100
+#define U8500_TWD_BASE 0xa0410600
+#define U8500_GIC_DIST_BASE 0xa0411000
+#define U8500_L2CC_BASE 0xa0412000
+
+#define U8500_MODEM_I2C 0xb7e02000
+
+#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000)
+#define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000)
+#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
+#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
+
+#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+
+/* per6 base addresses */
+#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
+#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100)
+#define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */
+#define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */
+#define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */
+#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
+
+/* per5 base addresses */
+#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
+#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
+
+/* per4 base addresses */
+#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000)
+#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000)
+#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000)
+#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000)
+#define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000)
+#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
+#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
+#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
+#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
+#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
+#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
+#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
+
+/* per3 base addresses */
+#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
+#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
+
+/* per2 base addresses */
+#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
+#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000)
+#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
+#define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000)
+#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000)
+#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
+
+#define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040
+
+#define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE
+#define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80)
+#define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE
+#define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80)
+#define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100)
+#define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180)
+#define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE
+#define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80)
+#define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE
+
+#define U8500_MCDE_SIZE 0x1000
+#define U8500_DSI_LINK_SIZE 0x1000
+#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE)
+#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE)
+#define U8500_DSI_LINK_COUNT 0x3
+
+/* Modem and APE physical addresses */
+#define U8500_MODEM_BASE 0xe000000
+#define U8500_APE_BASE 0x6000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 00000000000..8d74d927d4e
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Debugging macro include header
+ *
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <mach/hardware.h>
+
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+
+/*
+ * DEBUG_LL only works if only one SOC is built in. We don't use #else below
+ * in order to get "__UX500_UART redefined" warnings if more than one SOC is
+ * built, so that there's some hint during the build that something is wrong.
+ */
+
+#ifdef CONFIG_UX500_SOC_DB5500
+#define __UX500_UART(n) U5500_UART##n##_BASE
+#endif
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define __UX500_UART(n) U8500_UART##n##_BASE
+#endif
+
+#ifndef __UX500_UART
+#error Unknown SOC
+#endif
+
+#define UX500_UART(n) __UX500_UART(n)
+#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =UART_BASE @ no, physical address
+ ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
+ .endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
new file mode 100644
index 00000000000..5f6cb71fc62
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H__
+#define __ASM_ARCH_DEVICES_H__
+
+struct platform_device;
+struct amba_device;
+
+extern struct platform_device u5500_gpio_devs[];
+extern struct platform_device u8500_gpio_devs[];
+
+extern struct amba_device ux500_pl031_device;
+
+extern struct platform_device u8500_dma40_device;
+extern struct platform_device ux500_ske_keypad_device;
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 00000000000..e16299e1020
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,18 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ * -just satisfied checkpatch script.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
new file mode 100644
index 00000000000..c01ef66537f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -0,0 +1,5 @@
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 00000000000..b6ba26a1367
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/*
+ * Macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL 0xf0000000
+#define U8500_IO_PHYSICAL 0xa0000000
+
+/* This macro is used in assembly, so no cast */
+#define IO_ADDRESS(x) \
+ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n) __io(IO_ADDRESS(n))
+/* Used by some plat-nomadik code */
+#define io_p2v(n) __io_address(n)
+
+#include <mach/db8500-regs.h>
+#include <mach/db5500-regs.h>
+
+#ifndef __ASSEMBLY__
+
+#include <mach/id.h>
+extern void __iomem *_PRCMU_BASE;
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h
new file mode 100644
index 00000000000..833d6a6edc9
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/id.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_UX500_ID
+#define __MACH_UX500_ID
+
+/**
+ * struct dbx500_asic_id - fields of the ASIC ID
+ * @process: the manufacturing process, 0x40 is 40 nm 0x00 is "standard"
+ * @partnumber: hithereto 0x8500 for DB8500
+ * @revision: version code in the series
+ */
+struct dbx500_asic_id {
+ u16 partnumber;
+ u8 revision;
+ u8 process;
+};
+
+extern struct dbx500_asic_id dbx500_id;
+
+static inline unsigned int __attribute_const__ dbx500_partnumber(void)
+{
+ return dbx500_id.partnumber;
+}
+
+static inline unsigned int __attribute_const__ dbx500_revision(void)
+{
+ return dbx500_id.revision;
+}
+
+/*
+ * SOCs
+ */
+
+static inline bool __attribute_const__ cpu_is_u8500(void)
+{
+ return dbx500_partnumber() == 0x8500;
+}
+
+static inline bool __attribute_const__ cpu_is_u5500(void)
+{
+ return dbx500_partnumber() == 0x5500;
+}
+
+/*
+ * 5500 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u5500v1(void)
+{
+ return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u5500v2(void)
+{
+ return (dbx500_id.revision & 0xf0) == 0xB0;
+}
+
+static inline bool __attribute_const__ cpu_is_u5500v20(void)
+{
+ return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
+}
+
+static inline bool __attribute_const__ cpu_is_u5500v21(void)
+{
+ return cpu_is_u5500() && (dbx500_revision() == 0xB1);
+}
+
+/*
+ * 8500 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u8500ed(void)
+{
+ return cpu_is_u8500() && dbx500_revision() == 0x00;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v1(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() & 0xf0) == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v10(void)
+{
+ return cpu_is_u8500() && dbx500_revision() == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v11(void)
+{
+ return cpu_is_u8500() && dbx500_revision() == 0xA1;
+}
+
+static inline bool __attribute_const__ cpu_is_u8500v2(void)
+{
+ return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0);
+}
+
+static inline bool cpu_is_u8500v20(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() == 0xB0);
+}
+
+static inline bool cpu_is_u8500v21(void)
+{
+ return cpu_is_u8500() && (dbx500_revision() == 0xB1);
+}
+
+static inline bool cpu_is_u8500v20_or_later(void)
+{
+ return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11();
+}
+
+static inline bool ux500_is_svp(void)
+{
+ return false;
+}
+
+#define ux500_unknown_soc() BUG()
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 00000000000..1cf3f44ce5b
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
new file mode 100644
index 00000000000..d2d4131435a
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -0,0 +1,63 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_MOP500_H
+#define __MACH_IRQS_BOARD_MOP500_H
+
+/* Number of AB8500 irqs is taken from header file */
+#include <linux/mfd/abx500/ab8500.h>
+
+#define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START
+#define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \
+ + AB8500_NR_IRQS)
+
+/* TC35892 */
+#define TC35892_NR_INTERNAL_IRQS 8
+#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x))
+#define TC35892_NR_GPIOS 24
+#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS)
+
+#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS
+
+#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END
+#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \
+ + MOP500_EGPIO_NR_IRQS)
+/* STMPE1601 irqs */
+#define STMPE_NR_INTERNAL_IRQS 9
+#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x))
+#define STMPE_NR_GPIOS 24
+#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x))
+
+#define MOP500_STMPE1601_IRQ_END \
+ MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+
+/* AB8500 virtual gpio IRQ */
+#define AB8500_VIR_GPIO_NR_IRQS 16
+
+#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \
+ MOP500_STMPE1601_IRQ_END
+#define MOP500_AB8500_VIR_GPIO_IRQ_END \
+ (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS)
+
+#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END
+
+#define MOP500_IRQ_END MOP500_NR_IRQS
+
+/*
+ * We may have several boards, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_BOARD_START remains the same for either board.
+ */
+#if MOP500_IRQ_END > IRQ_BOARD_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END MOP500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
new file mode 100644
index 00000000000..29d972c7717
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_BOARD_U5500_H
+#define __MACH_IRQS_BOARD_U5500_H
+
+#define AB5500_NR_IRQS 5
+#define IRQ_AB5500_BASE IRQ_BOARD_START
+#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS)
+
+#define U5500_IRQ_END IRQ_AB5500_END
+
+#if IRQ_BOARD_END < U5500_IRQ_END
+#undef IRQ_BOARD_END
+#define IRQ_BOARD_END U5500_IRQ_END
+#endif
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
new file mode 100644
index 00000000000..77239776a6f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB5500_H
+#define __MACH_IRQS_DB5500_H
+
+#define IRQ_DB5500_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_DB5500_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_DB5500_PMU0 (IRQ_SHPI_START + 7)
+#define IRQ_DB5500_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_DB5500_RTT (IRQ_SHPI_START + 9)
+#define IRQ_DB5500_PKA (IRQ_SHPI_START + 10)
+#define IRQ_DB5500_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_DB5500_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_DB5500_L2CC (IRQ_SHPI_START + 13)
+#define IRQ_DB5500_MSP0 (IRQ_SHPI_START + 14)
+#define IRQ_DB5500_CRYP1 (IRQ_SHPI_START + 15)
+#define IRQ_DB5500_PMU1 (IRQ_SHPI_START + 16)
+#define IRQ_DB5500_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_DB5500_RTC (IRQ_SHPI_START + 18)
+#define IRQ_DB5500_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_DB5500_USB_WAKEUP (IRQ_SHPI_START + 20)
+#define IRQ_DB5500_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_DB5500_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_DB5500_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DB5500_DMA_SECURE (IRQ_SHPI_START + 24)
+#define IRQ_DB5500_DMA (IRQ_SHPI_START + 25)
+#define IRQ_DB5500_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_DB5500_ICN_PMU1 (IRQ_SHPI_START + 27)
+#define IRQ_DB5500_ICN_PMU2 (IRQ_SHPI_START + 28)
+#define IRQ_DB5500_UART3 (IRQ_SHPI_START + 29)
+#define IRQ_DB5500_SPI3 (IRQ_SHPI_START + 30)
+#define IRQ_DB5500_SDMMC4 (IRQ_SHPI_START + 31)
+#define IRQ_DB5500_IRRC (IRQ_SHPI_START + 33)
+#define IRQ_DB5500_IRDA_FT (IRQ_SHPI_START + 34)
+#define IRQ_DB5500_IRDA_SD (IRQ_SHPI_START + 35)
+#define IRQ_DB5500_IRDA_FI (IRQ_SHPI_START + 36)
+#define IRQ_DB5500_IRDA_FD (IRQ_SHPI_START + 37)
+#define IRQ_DB5500_FSMC_CODEREADY (IRQ_SHPI_START + 38)
+#define IRQ_DB5500_FSMC_NANDWAIT (IRQ_SHPI_START + 39)
+#define IRQ_DB5500_AB5500 (IRQ_SHPI_START + 40)
+#define IRQ_DB5500_SDMMC2 (IRQ_SHPI_START + 41)
+#define IRQ_DB5500_SIA (IRQ_SHPI_START + 42)
+#define IRQ_DB5500_SIA2 (IRQ_SHPI_START + 43)
+#define IRQ_DB5500_HVA (IRQ_SHPI_START + 44)
+#define IRQ_DB5500_HVA2 (IRQ_SHPI_START + 45)
+#define IRQ_DB5500_PRCMU0 (IRQ_SHPI_START + 46)
+#define IRQ_DB5500_PRCMU1 (IRQ_SHPI_START + 47)
+#define IRQ_DB5500_DISP (IRQ_SHPI_START + 48)
+#define IRQ_DB5500_SDMMC1 (IRQ_SHPI_START + 50)
+#define IRQ_DB5500_MSP1 (IRQ_SHPI_START + 52)
+#define IRQ_DB5500_KBD (IRQ_SHPI_START + 53)
+#define IRQ_DB5500_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_DB5500_B2R2 (IRQ_SHPI_START + 56)
+#define IRQ_DB5500_CRYP0 (IRQ_SHPI_START + 57)
+#define IRQ_DB5500_SDMMC3 (IRQ_SHPI_START + 59)
+#define IRQ_DB5500_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_DB5500_HSEM (IRQ_SHPI_START + 61)
+#define IRQ_DB5500_SBAG (IRQ_SHPI_START + 63)
+#define IRQ_DB5500_MODEM (IRQ_SHPI_START + 65)
+#define IRQ_DB5500_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_DB5500_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_DB5500_SRPTIMER (IRQ_SHPI_START + 101)
+#define IRQ_DB5500_CTI0 (IRQ_SHPI_START + 108)
+#define IRQ_DB5500_CTI1 (IRQ_SHPI_START + 109)
+#define IRQ_DB5500_ICN_ERR (IRQ_SHPI_START + 110)
+#define IRQ_DB5500_MALI_PPMMU (IRQ_SHPI_START + 112)
+#define IRQ_DB5500_MALI_PP (IRQ_SHPI_START + 113)
+#define IRQ_DB5500_MALI_GPMMU (IRQ_SHPI_START + 114)
+#define IRQ_DB5500_MALI_GP (IRQ_SHPI_START + 115)
+#define IRQ_DB5500_MALI (IRQ_SHPI_START + 116)
+#define IRQ_DB5500_PRCMU_SEM (IRQ_SHPI_START + 118)
+#define IRQ_DB5500_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_DB5500_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_DB5500_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_DB5500_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_DB5500_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_DB5500_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126)
+
+#ifdef CONFIG_UX500_SOC_DB5500
+
+/*
+ * After the GPIO ones we reserve a range of IRQ:s in which virtual
+ * IRQ:s representing modem IRQ:s can be allocated
+ */
+#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START
+#define IRQ_MODEM_EVENTS_NBR 72
+#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR)
+
+/* List of virtual IRQ:s that are allocated from the range above */
+#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43)
+#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45)
+#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END IRQ_MODEM_EVENTS_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB5500 */
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
new file mode 100644
index 00000000000..68bc1497460
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_IRQS_DB8500_H
+#define __MACH_IRQS_DB8500_H
+
+#define IRQ_DB8500_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_DB8500_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_DB8500_PMU (IRQ_SHPI_START + 7)
+#define IRQ_DB8500_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_DB8500_RTT (IRQ_SHPI_START + 9)
+#define IRQ_DB8500_PKA (IRQ_SHPI_START + 10)
+#define IRQ_DB8500_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_DB8500_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_DB8500_L2CC (IRQ_SHPI_START + 13)
+#define IRQ_DB8500_SSP0 (IRQ_SHPI_START + 14)
+#define IRQ_DB8500_CRYP1 (IRQ_SHPI_START + 15)
+#define IRQ_DB8500_MSP1_RX (IRQ_SHPI_START + 16)
+#define IRQ_DB8500_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_DB8500_RTC (IRQ_SHPI_START + 18)
+#define IRQ_DB8500_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_DB8500_USB_WAKEUP (IRQ_SHPI_START + 20)
+#define IRQ_DB8500_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_DB8500_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_DB8500_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DB8500_DMA_SECURE (IRQ_SHPI_START + 24)
+#define IRQ_DB8500_DMA (IRQ_SHPI_START + 25)
+#define IRQ_DB8500_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_DB8500_ICN_PMU1 (IRQ_SHPI_START + 27)
+#define IRQ_DB8500_ICN_PMU2 (IRQ_SHPI_START + 28)
+#define IRQ_DB8500_HSIR_EXCEP (IRQ_SHPI_START + 29)
+#define IRQ_DB8500_MSP0 (IRQ_SHPI_START + 31)
+#define IRQ_DB8500_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
+#define IRQ_DB8500_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
+#define IRQ_DB8500_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
+#define IRQ_DB8500_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
+#define IRQ_DB8500_HSIR_CH4_OVRRUN (IRQ_SHPI_START + 36)
+#define IRQ_DB8500_HSIR_CH5_OVRRUN (IRQ_SHPI_START + 37)
+#define IRQ_DB8500_HSIR_CH6_OVRRUN (IRQ_SHPI_START + 38)
+#define IRQ_DB8500_HSIR_CH7_OVRRUN (IRQ_SHPI_START + 39)
+#define IRQ_DB8500_AB8500 (IRQ_SHPI_START + 40)
+#define IRQ_DB8500_SDMMC2 (IRQ_SHPI_START + 41)
+#define IRQ_DB8500_SIA (IRQ_SHPI_START + 42)
+#define IRQ_DB8500_SIA2 (IRQ_SHPI_START + 43)
+#define IRQ_DB8500_SVA (IRQ_SHPI_START + 44)
+#define IRQ_DB8500_SVA2 (IRQ_SHPI_START + 45)
+#define IRQ_DB8500_PRCMU0 (IRQ_SHPI_START + 46)
+#define IRQ_DB8500_PRCMU1 (IRQ_SHPI_START + 47)
+#define IRQ_DB8500_DISP (IRQ_SHPI_START + 48)
+#define IRQ_DB8500_SPI3 (IRQ_SHPI_START + 49)
+#define IRQ_DB8500_SDMMC1 (IRQ_SHPI_START + 50)
+#define IRQ_DB8500_I2C4 (IRQ_SHPI_START + 51)
+#define IRQ_DB8500_SSP1 (IRQ_SHPI_START + 52)
+#define IRQ_DB8500_SKE (IRQ_SHPI_START + 53)
+#define IRQ_DB8500_KB (IRQ_SHPI_START + 54)
+#define IRQ_DB8500_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_DB8500_B2R2 (IRQ_SHPI_START + 56)
+#define IRQ_DB8500_CRYP0 (IRQ_SHPI_START + 57)
+#define IRQ_DB8500_SDMMC3 (IRQ_SHPI_START + 59)
+#define IRQ_DB8500_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_DB8500_HSEM (IRQ_SHPI_START + 61)
+#define IRQ_DB8500_MSP1 (IRQ_SHPI_START + 62)
+#define IRQ_DB8500_SBAG (IRQ_SHPI_START + 63)
+#define IRQ_DB8500_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_DB8500_SRPTIMER (IRQ_SHPI_START + 97)
+#define IRQ_DB8500_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_DB8500_SDMMC4 (IRQ_SHPI_START + 99)
+#define IRQ_DB8500_SDMMC5 (IRQ_SHPI_START + 100)
+#define IRQ_DB8500_HSIRD0 (IRQ_SHPI_START + 104)
+#define IRQ_DB8500_HSIRD1 (IRQ_SHPI_START + 105)
+#define IRQ_DB8500_HSITD0 (IRQ_SHPI_START + 106)
+#define IRQ_DB8500_HSITD1 (IRQ_SHPI_START + 107)
+#define IRQ_DB8500_CTI0 (IRQ_SHPI_START + 108)
+#define IRQ_DB8500_CTI1 (IRQ_SHPI_START + 109)
+#define IRQ_DB8500_ICN_ERR (IRQ_SHPI_START + 110)
+#define IRQ_DB8500_MALI_PPMMU (IRQ_SHPI_START + 112)
+#define IRQ_DB8500_MALI_PP (IRQ_SHPI_START + 113)
+#define IRQ_DB8500_MALI_GPMMU (IRQ_SHPI_START + 114)
+#define IRQ_DB8500_MALI_GP (IRQ_SHPI_START + 115)
+#define IRQ_DB8500_MALI (IRQ_SHPI_START + 116)
+#define IRQ_DB8500_PRCMU_SEM (IRQ_SHPI_START + 118)
+#define IRQ_DB8500_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_DB8500_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_DB8500_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_DB8500_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_DB8500_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_DB8500_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_DB8500_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126)
+#define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127)
+
+#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71)
+#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66)
+#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65)
+
+#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83)
+#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78)
+#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79)
+#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77)
+
+#ifdef CONFIG_UX500_SOC_DB8500
+
+/* Virtual interrupts corresponding to the PRCMU wakeups. */
+#define IRQ_PRCMU_BASE IRQ_SOC_START
+#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE)
+
+#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE)
+#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1)
+#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2)
+#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3)
+#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4)
+#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5)
+#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6)
+#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7)
+#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8)
+#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9)
+#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10)
+#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11)
+#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12)
+#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13)
+#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14)
+#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15)
+#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16)
+#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17)
+#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18)
+#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19)
+#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20)
+#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21)
+#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22)
+#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23)
+
+/*
+ * We may have several SoCs, but only one will run at a
+ * time, so the one with most IRQs will bump this ahead,
+ * but the IRQ_SOC_START remains the same for either SoC.
+ */
+#if IRQ_SOC_END < IRQ_PRCMU_END
+#undef IRQ_SOC_END
+#define IRQ_SOC_END IRQ_PRCMU_END
+#endif
+
+#endif /* CONFIG_UX500_SOC_DB8500 */
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 00000000000..9db68d264c5
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER 29
+#define IRQ_LOCALWDOG 30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START 32
+
+/*
+ * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't
+ * add any other IRQs here, use the irqs-dbx500.h files.
+ */
+#define IRQ_MTU0 (IRQ_SHPI_START + 4)
+
+#define DBX500_NR_INTERNAL_IRQS 160
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO 288
+#define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS)
+#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+#define IRQ_SOC_START IRQ_GPIO_END
+/* This will be overridden by SoC-specific irq headers */
+#define IRQ_SOC_END IRQ_SOC_START
+
+#include <mach/irqs-db5500.h>
+#include <mach/irqs-db8500.h>
+
+#define IRQ_BOARD_START IRQ_SOC_END
+/* This will be overridden by board-specific irq headers */
+#define IRQ_BOARD_END IRQ_BOARD_START
+
+#ifdef CONFIG_MACH_U8500
+#include <mach/irqs-board-mop500.h>
+#endif
+
+#ifdef CONFIG_MACH_U5500
+#include <mach/irqs-board-u5500.h>
+#endif
+
+#define NR_IRQS IRQ_BOARD_END
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ux500/include/mach/mbox-db5500.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
new file mode 100644
index 00000000000..7f9da4d2fbd
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
@@ -0,0 +1,88 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __INC_STE_MBOX_H
+#define __INC_STE_MBOX_H
+
+#define MBOX_BUF_SIZE 16
+#define MBOX_NAME_SIZE 8
+
+/**
+ * mbox_recv_cb_t - Definition of the mailbox callback.
+ * @mbox_msg: The mailbox message.
+ * @priv: The clients private data as specified in the call to mbox_setup.
+ *
+ * This function will be called upon reception of new mailbox messages.
+ */
+typedef void mbox_recv_cb_t (u32 mbox_msg, void *priv);
+
+/**
+ * struct mbox - Mailbox instance struct
+ * @list: Linked list head.
+ * @pdev: Pointer to device struct.
+ * @cb: Callback function. Will be called
+ * when new data is received.
+ * @client_data: Clients private data. Will be sent back
+ * in the callback function.
+ * @virtbase_peer: Virtual address for outgoing mailbox.
+ * @virtbase_local: Virtual address for incoming mailbox.
+ * @buffer: Then internal queue for outgoing messages.
+ * @name: Name of this mailbox.
+ * @buffer_available: Completion variable to achieve "blocking send".
+ * This variable will be signaled when there is
+ * internal buffer space available.
+ * @client_blocked: To keep track if any client is currently
+ * blocked.
+ * @lock: Spinlock to protect this mailbox instance.
+ * @write_index: Index in internal buffer to write to.
+ * @read_index: Index in internal buffer to read from.
+ * @allocated: Indicates whether this particular mailbox
+ * id has been allocated by someone.
+ */
+struct mbox {
+ struct list_head list;
+ struct platform_device *pdev;
+ mbox_recv_cb_t *cb;
+ void *client_data;
+ void __iomem *virtbase_peer;
+ void __iomem *virtbase_local;
+ u32 buffer[MBOX_BUF_SIZE];
+ char name[MBOX_NAME_SIZE];
+ struct completion buffer_available;
+ u8 client_blocked;
+ spinlock_t lock;
+ u8 write_index;
+ u8 read_index;
+ bool allocated;
+};
+
+/**
+ * mbox_setup - Set up a mailbox and return its instance.
+ * @mbox_id: The ID number of the mailbox. 0 or 1 for modem CPU,
+ * 2 for modem DSP.
+ * @mbox_cb: Pointer to the callback function to be called when a new message
+ * is received.
+ * @priv: Client user data which will be returned in the callback.
+ *
+ * Returns a mailbox instance to be specified in subsequent calls to mbox_send.
+ */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv);
+
+/**
+ * mbox_send - Send a mailbox message.
+ * @mbox: Mailbox instance (returned by mbox_setup)
+ * @mbox_msg: The mailbox message to send.
+ * @block: Specifies whether this call will block until send is possible,
+ * or return an error if the mailbox buffer is full.
+ *
+ * Returns 0 on success or a negative error code on error. -ENOMEM indicates
+ * that the internal buffer is full and you have to try again later (or
+ * specify "block" in order to block until send is possible).
+ */
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block);
+
+#endif /*INC_STE_MBOX_H*/
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 00000000000..a7d363fdb4c
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+void __init ux500_map_io(void);
+extern void __init u5500_map_io(void);
+extern void __init u8500_map_io(void);
+
+extern void __init u5500_init_devices(void);
+extern void __init u8500_init_devices(void);
+
+extern void __init ux500_init_irq(void);
+
+extern void __init u5500_sdi_init(void);
+
+extern void __init db5500_dma_init(void);
+
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+
+struct amba_device;
+extern void __init amba_add_devices(struct amba_device *devs[], int num);
+
+struct sys_timer;
+extern struct sys_timer ux500_timer;
+
+#define __IO_DEV_DESC(x, sz) { \
+ .virtual = IO_ADDRESS(x), \
+ .pfn = __phys_to_pfn(x), \
+ .length = sz, \
+ .type = MT_DEVICE, \
+}
+
+#define __MEM_DEV_DESC(x, sz) { \
+ .virtual = IO_ADDRESS(x), \
+ .pfn = __phys_to_pfn(x), \
+ .length = sz, \
+ .type = MT_MEMORY, \
+}
+
+#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 00000000000..258e5c919c2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+ /*
+ * This should do all the clock switching
+ * and wait for interrupt tricks
+ */
+ cpu_do_idle();
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 00000000000..d0942c17401
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE 110000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 00000000000..6fb3c4b0105
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <linux/io.h>
+#include <linux/amba/serial.h>
+#include <mach/hardware.h>
+
+u32 ux500_uart_base;
+
+static void putc(const char c)
+{
+ /* Do nothing if the UART is not enabled. */
+ if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
+ return;
+
+ if (c == '\n')
+ putc('\r');
+
+ while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5))
+ barrier();
+ __raw_writeb(c, ux500_uart_base + UART01x_DR);
+}
+
+static void flush(void)
+{
+ if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
+ return;
+ while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3))
+ barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+ /* Check in run time if we run on an U8500 or U5500 */
+ if (machine_is_u5500())
+ ux500_uart_base = U5500_UART0_BASE;
+ else
+ ux500_uart_base = U8500_UART2_BASE;
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
new file mode 100644
index 00000000000..d3739d41881
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+#include <linux/dmaengine.h>
+
+#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+
+struct ux500_musb_board_data {
+ void **dma_rx_param_array;
+ void **dma_tx_param_array;
+ u32 num_rx_channels;
+ u32 num_tx_channels;
+ bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+};
+
+void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
+ int *dma_tx_cfg);
+#endif
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 00000000000..5ba113309a0
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
+ return 0;
+}
diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c
new file mode 100644
index 00000000000..2b2d51caf9d
--- /dev/null
+++ b/arch/arm/mach-ux500/mbox-db5500.c
@@ -0,0 +1,565 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+/*
+ * Mailbox nomenclature:
+ *
+ * APE MODEM
+ * mbox pairX
+ * ..........................
+ * . .
+ * . peer .
+ * . send ---- .
+ * . --> | | .
+ * . | | .
+ * . ---- .
+ * . .
+ * . local .
+ * . rec ---- .
+ * . | | <-- .
+ * . | | .
+ * . ---- .
+ * .........................
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/completion.h>
+#include <mach/mbox-db5500.h>
+
+#define MBOX_NAME "mbox"
+
+#define MBOX_FIFO_DATA 0x000
+#define MBOX_FIFO_ADD 0x004
+#define MBOX_FIFO_REMOVE 0x008
+#define MBOX_FIFO_THRES_FREE 0x00C
+#define MBOX_FIFO_THRES_OCCUP 0x010
+#define MBOX_FIFO_STATUS 0x014
+
+#define MBOX_DISABLE_IRQ 0x4
+#define MBOX_ENABLE_IRQ 0x0
+#define MBOX_LATCH 1
+
+/* Global list of all mailboxes */
+static struct list_head mboxs = LIST_HEAD_INIT(mboxs);
+
+static struct mbox *get_mbox_with_id(u8 id)
+{
+ u8 i;
+ struct list_head *pos = &mboxs;
+ for (i = 0; i <= id; i++)
+ pos = pos->next;
+
+ return (struct mbox *) list_entry(pos, struct mbox, list);
+}
+
+int mbox_send(struct mbox *mbox, u32 mbox_msg, bool block)
+{
+ int res = 0;
+
+ spin_lock(&mbox->lock);
+
+ dev_dbg(&(mbox->pdev->dev),
+ "About to buffer 0x%X to mailbox 0x%X."
+ " ri = %d, wi = %d\n",
+ mbox_msg, (u32)mbox, mbox->read_index,
+ mbox->write_index);
+
+ /* Check if write buffer is full */
+ while (((mbox->write_index + 1) % MBOX_BUF_SIZE) == mbox->read_index) {
+ if (!block) {
+ dev_dbg(&(mbox->pdev->dev),
+ "Buffer full in non-blocking call! "
+ "Returning -ENOMEM!\n");
+ res = -ENOMEM;
+ goto exit;
+ }
+ spin_unlock(&mbox->lock);
+ dev_dbg(&(mbox->pdev->dev),
+ "Buffer full in blocking call! Sleeping...\n");
+ mbox->client_blocked = 1;
+ wait_for_completion(&mbox->buffer_available);
+ dev_dbg(&(mbox->pdev->dev),
+ "Blocking send was woken up! Trying again...\n");
+ spin_lock(&mbox->lock);
+ }
+
+ mbox->buffer[mbox->write_index] = mbox_msg;
+ mbox->write_index = (mbox->write_index + 1) % MBOX_BUF_SIZE;
+
+ /*
+ * Indicate that we want an IRQ as soon as there is a slot
+ * in the FIFO
+ */
+ writel(MBOX_ENABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+exit:
+ spin_unlock(&mbox->lock);
+ return res;
+}
+EXPORT_SYMBOL(mbox_send);
+
+#if defined(CONFIG_DEBUG_FS)
+/*
+ * Expected input: <value> <nbr sends>
+ * Example: "echo 0xdeadbeef 4 > mbox-node" sends 0xdeadbeef 4 times
+ */
+static ssize_t mbox_write_fifo(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ unsigned long mbox_mess;
+ unsigned long nbr_sends;
+ unsigned long i;
+ char int_buf[16];
+ char *token;
+ char *val;
+
+ struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+ strncpy((char *) &int_buf, buf, sizeof(int_buf));
+ token = (char *) &int_buf;
+
+ /* Parse message */
+ val = strsep(&token, " ");
+ if ((val == NULL) || (strict_strtoul(val, 16, &mbox_mess) != 0))
+ mbox_mess = 0xDEADBEEF;
+
+ val = strsep(&token, " ");
+ if ((val == NULL) || (strict_strtoul(val, 10, &nbr_sends) != 0))
+ nbr_sends = 1;
+
+ dev_dbg(dev, "Will write 0x%lX %ld times using data struct at 0x%X\n",
+ mbox_mess, nbr_sends, (u32) mbox);
+
+ for (i = 0; i < nbr_sends; i++)
+ mbox_send(mbox, mbox_mess, true);
+
+ return count;
+}
+
+static ssize_t mbox_read_fifo(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int mbox_value;
+ struct mbox *mbox = (struct mbox *) dev->platform_data;
+
+ if ((readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7) <= 0)
+ return sprintf(buf, "Mailbox is empty\n");
+
+ mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+ writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+ return sprintf(buf, "0x%X\n", mbox_value);
+}
+
+static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+
+static int mbox_show(struct seq_file *s, void *data)
+{
+ struct list_head *pos;
+ u8 mbox_index = 0;
+
+ list_for_each(pos, &mboxs) {
+ struct mbox *m =
+ (struct mbox *) list_entry(pos, struct mbox, list);
+ if (m == NULL) {
+ seq_printf(s,
+ "Unable to retrieve mailbox %d\n",
+ mbox_index);
+ continue;
+ }
+
+ spin_lock(&m->lock);
+ if ((m->virtbase_peer == NULL) || (m->virtbase_local == NULL)) {
+ seq_printf(s, "MAILBOX %d not setup or corrupt\n",
+ mbox_index);
+ spin_unlock(&m->lock);
+ continue;
+ }
+
+ seq_printf(s,
+ "===========================\n"
+ " MAILBOX %d\n"
+ " PEER MAILBOX DUMP\n"
+ "---------------------------\n"
+ "FIFO: 0x%X (%d)\n"
+ "Free Threshold: 0x%.2X (%d)\n"
+ "Occupied Threshold: 0x%.2X (%d)\n"
+ "Status: 0x%.2X (%d)\n"
+ " Free spaces (ot): %d (%d)\n"
+ " Occup spaces (ot): %d (%d)\n"
+ "===========================\n"
+ " LOCAL MAILBOX DUMP\n"
+ "---------------------------\n"
+ "FIFO: 0x%.X (%d)\n"
+ "Free Threshold: 0x%.2X (%d)\n"
+ "Occupied Threshold: 0x%.2X (%d)\n"
+ "Status: 0x%.2X (%d)\n"
+ " Free spaces (ot): %d (%d)\n"
+ " Occup spaces (ot): %d (%d)\n"
+ "===========================\n"
+ "write_index: %d\n"
+ "read_index : %d\n"
+ "===========================\n"
+ "\n",
+ mbox_index,
+ readl(m->virtbase_peer + MBOX_FIFO_DATA),
+ readl(m->virtbase_peer + MBOX_FIFO_DATA),
+ readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+ readl(m->virtbase_peer + MBOX_FIFO_THRES_FREE),
+ readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+ readl(m->virtbase_peer + MBOX_FIFO_THRES_OCCUP),
+ readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+ readl(m->virtbase_peer + MBOX_FIFO_STATUS),
+ (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 4) & 0x7,
+ (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 7) & 0x1,
+ (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 0) & 0x7,
+ (readl(m->virtbase_peer + MBOX_FIFO_STATUS) >> 3) & 0x1,
+ readl(m->virtbase_local + MBOX_FIFO_DATA),
+ readl(m->virtbase_local + MBOX_FIFO_DATA),
+ readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+ readl(m->virtbase_local + MBOX_FIFO_THRES_FREE),
+ readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+ readl(m->virtbase_local + MBOX_FIFO_THRES_OCCUP),
+ readl(m->virtbase_local + MBOX_FIFO_STATUS),
+ readl(m->virtbase_local + MBOX_FIFO_STATUS),
+ (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 4) & 0x7,
+ (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 7) & 0x1,
+ (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 0) & 0x7,
+ (readl(m->virtbase_local + MBOX_FIFO_STATUS) >> 3) & 0x1,
+ m->write_index, m->read_index);
+ mbox_index++;
+ spin_unlock(&m->lock);
+ }
+
+ return 0;
+}
+
+static int mbox_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, mbox_show, NULL);
+}
+
+static const struct file_operations mbox_operations = {
+ .owner = THIS_MODULE,
+ .open = mbox_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+static irqreturn_t mbox_irq(int irq, void *arg)
+{
+ u32 mbox_value;
+ int nbr_occup;
+ int nbr_free;
+ struct mbox *mbox = (struct mbox *) arg;
+
+ spin_lock(&mbox->lock);
+
+ dev_dbg(&(mbox->pdev->dev),
+ "mbox IRQ [%d] received. ri = %d, wi = %d\n",
+ irq, mbox->read_index, mbox->write_index);
+
+ /*
+ * Check if we have any outgoing messages, and if there is space for
+ * them in the FIFO.
+ */
+ if (mbox->read_index != mbox->write_index) {
+ /*
+ * Check by reading FREE for LOCAL since that indicates
+ * OCCUP for PEER
+ */
+ nbr_free = (readl(mbox->virtbase_local + MBOX_FIFO_STATUS)
+ >> 4) & 0x7;
+ dev_dbg(&(mbox->pdev->dev),
+ "Status indicates %d empty spaces in the FIFO!\n",
+ nbr_free);
+
+ while ((nbr_free > 0) &&
+ (mbox->read_index != mbox->write_index)) {
+ /* Write the message and latch it into the FIFO */
+ writel(mbox->buffer[mbox->read_index],
+ (mbox->virtbase_peer + MBOX_FIFO_DATA));
+ writel(MBOX_LATCH,
+ (mbox->virtbase_peer + MBOX_FIFO_ADD));
+ dev_dbg(&(mbox->pdev->dev),
+ "Wrote message 0x%X to addr 0x%X\n",
+ mbox->buffer[mbox->read_index],
+ (u32) (mbox->virtbase_peer + MBOX_FIFO_DATA));
+
+ nbr_free--;
+ mbox->read_index =
+ (mbox->read_index + 1) % MBOX_BUF_SIZE;
+ }
+
+ /*
+ * Check if we still want IRQ:s when there is free
+ * space to send
+ */
+ if (mbox->read_index != mbox->write_index) {
+ dev_dbg(&(mbox->pdev->dev),
+ "Still have messages to send, but FIFO full. "
+ "Request IRQ again!\n");
+ writel(MBOX_ENABLE_IRQ,
+ mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+ } else {
+ dev_dbg(&(mbox->pdev->dev),
+ "No more messages to send. "
+ "Do not request IRQ again!\n");
+ writel(MBOX_DISABLE_IRQ,
+ mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+ }
+
+ /*
+ * Check if we can signal any blocked clients that it is OK to
+ * start buffering again
+ */
+ if (mbox->client_blocked &&
+ (((mbox->write_index + 1) % MBOX_BUF_SIZE)
+ != mbox->read_index)) {
+ dev_dbg(&(mbox->pdev->dev),
+ "Waking up blocked client\n");
+ complete(&mbox->buffer_available);
+ mbox->client_blocked = 0;
+ }
+ }
+
+ /* Check if we have any incoming messages */
+ nbr_occup = readl(mbox->virtbase_local + MBOX_FIFO_STATUS) & 0x7;
+ if (nbr_occup == 0)
+ goto exit;
+
+ if (mbox->cb == NULL) {
+ dev_dbg(&(mbox->pdev->dev), "No receive callback registered, "
+ "leaving %d incoming messages in fifo!\n", nbr_occup);
+ goto exit;
+ }
+
+ /* Read and acknowledge the message */
+ mbox_value = readl(mbox->virtbase_local + MBOX_FIFO_DATA);
+ writel(MBOX_LATCH, (mbox->virtbase_local + MBOX_FIFO_REMOVE));
+
+ /* Notify consumer of new mailbox message */
+ dev_dbg(&(mbox->pdev->dev), "Calling callback for message 0x%X!\n",
+ mbox_value);
+ mbox->cb(mbox_value, mbox->client_data);
+
+exit:
+ dev_dbg(&(mbox->pdev->dev), "Exit mbox IRQ. ri = %d, wi = %d\n",
+ mbox->read_index, mbox->write_index);
+ spin_unlock(&mbox->lock);
+
+ return IRQ_HANDLED;
+}
+
+/* Setup is executed once for each mbox pair */
+struct mbox *mbox_setup(u8 mbox_id, mbox_recv_cb_t *mbox_cb, void *priv)
+{
+ struct resource *resource;
+ int irq;
+ int res;
+ struct mbox *mbox;
+
+ mbox = get_mbox_with_id(mbox_id);
+ if (mbox == NULL) {
+ dev_err(&(mbox->pdev->dev), "Incorrect mailbox id: %d!\n",
+ mbox_id);
+ goto exit;
+ }
+
+ /*
+ * Check if mailbox has been allocated to someone else,
+ * otherwise allocate it
+ */
+ if (mbox->allocated) {
+ dev_err(&(mbox->pdev->dev), "Mailbox number %d is busy!\n",
+ mbox_id);
+ mbox = NULL;
+ goto exit;
+ }
+ mbox->allocated = true;
+
+ dev_dbg(&(mbox->pdev->dev), "Initiating mailbox number %d: 0x%X...\n",
+ mbox_id, (u32)mbox);
+
+ mbox->client_data = priv;
+ mbox->cb = mbox_cb;
+
+ /* Get addr for peer mailbox and ioremap it */
+ resource = platform_get_resource_byname(mbox->pdev,
+ IORESOURCE_MEM,
+ "mbox_peer");
+ if (resource == NULL) {
+ dev_err(&(mbox->pdev->dev),
+ "Unable to retrieve mbox peer resource\n");
+ mbox = NULL;
+ goto exit;
+ }
+ dev_dbg(&(mbox->pdev->dev),
+ "Resource name: %s start: 0x%X, end: 0x%X\n",
+ resource->name, resource->start, resource->end);
+ mbox->virtbase_peer = ioremap(resource->start, resource_size(resource));
+ if (!mbox->virtbase_peer) {
+ dev_err(&(mbox->pdev->dev), "Unable to ioremap peer mbox\n");
+ mbox = NULL;
+ goto exit;
+ }
+ dev_dbg(&(mbox->pdev->dev),
+ "ioremapped peer physical: (0x%X-0x%X) to virtual: 0x%X\n",
+ resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+ /* Get addr for local mailbox and ioremap it */
+ resource = platform_get_resource_byname(mbox->pdev,
+ IORESOURCE_MEM,
+ "mbox_local");
+ if (resource == NULL) {
+ dev_err(&(mbox->pdev->dev),
+ "Unable to retrieve mbox local resource\n");
+ mbox = NULL;
+ goto exit;
+ }
+ dev_dbg(&(mbox->pdev->dev),
+ "Resource name: %s start: 0x%X, end: 0x%X\n",
+ resource->name, resource->start, resource->end);
+ mbox->virtbase_local = ioremap(resource->start, resource_size(resource));
+ if (!mbox->virtbase_local) {
+ dev_err(&(mbox->pdev->dev), "Unable to ioremap local mbox\n");
+ mbox = NULL;
+ goto exit;
+ }
+ dev_dbg(&(mbox->pdev->dev),
+ "ioremapped local physical: (0x%X-0x%X) to virtual: 0x%X\n",
+ resource->start, resource->end, (u32) mbox->virtbase_peer);
+
+ init_completion(&mbox->buffer_available);
+ mbox->client_blocked = 0;
+
+ /* Get IRQ for mailbox and allocate it */
+ irq = platform_get_irq_byname(mbox->pdev, "mbox_irq");
+ if (irq < 0) {
+ dev_err(&(mbox->pdev->dev),
+ "Unable to retrieve mbox irq resource\n");
+ mbox = NULL;
+ goto exit;
+ }
+
+ dev_dbg(&(mbox->pdev->dev), "Allocating irq %d...\n", irq);
+ res = request_irq(irq, mbox_irq, 0, mbox->name, (void *) mbox);
+ if (res < 0) {
+ dev_err(&(mbox->pdev->dev),
+ "Unable to allocate mbox irq %d\n", irq);
+ mbox = NULL;
+ goto exit;
+ }
+
+ /* Set up mailbox to not launch IRQ on free space in mailbox */
+ writel(MBOX_DISABLE_IRQ, mbox->virtbase_peer + MBOX_FIFO_THRES_FREE);
+
+ /*
+ * Set up mailbox to launch IRQ on new message if we have
+ * a callback set. If not, do not raise IRQ, but keep message
+ * in FIFO for manual retrieval
+ */
+ if (mbox_cb != NULL)
+ writel(MBOX_ENABLE_IRQ,
+ mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+ else
+ writel(MBOX_DISABLE_IRQ,
+ mbox->virtbase_local + MBOX_FIFO_THRES_OCCUP);
+
+#if defined(CONFIG_DEBUG_FS)
+ res = device_create_file(&(mbox->pdev->dev), &dev_attr_fifo);
+ if (res != 0)
+ dev_warn(&(mbox->pdev->dev),
+ "Unable to create mbox sysfs entry");
+
+ (void) debugfs_create_file("mbox", S_IFREG | S_IRUGO, NULL,
+ NULL, &mbox_operations);
+#endif
+
+ dev_info(&(mbox->pdev->dev),
+ "Mailbox driver with index %d initiated!\n", mbox_id);
+
+exit:
+ return mbox;
+}
+EXPORT_SYMBOL(mbox_setup);
+
+
+int __init mbox_probe(struct platform_device *pdev)
+{
+ struct mbox local_mbox;
+ struct mbox *mbox;
+ int res = 0;
+ dev_dbg(&(pdev->dev), "Probing mailbox (pdev = 0x%X)...\n", (u32) pdev);
+
+ memset(&local_mbox, 0x0, sizeof(struct mbox));
+
+ /* Associate our mbox data with the platform device */
+ res = platform_device_add_data(pdev,
+ (void *) &local_mbox,
+ sizeof(struct mbox));
+ if (res != 0) {
+ dev_err(&(pdev->dev),
+ "Unable to allocate driver platform data!\n");
+ goto exit;
+ }
+
+ mbox = (struct mbox *) pdev->dev.platform_data;
+ mbox->pdev = pdev;
+ mbox->write_index = 0;
+ mbox->read_index = 0;
+
+ INIT_LIST_HEAD(&(mbox->list));
+ list_add_tail(&(mbox->list), &mboxs);
+
+ sprintf(mbox->name, "%s", MBOX_NAME);
+ spin_lock_init(&mbox->lock);
+
+ dev_info(&(pdev->dev), "Mailbox driver loaded\n");
+
+exit:
+ return res;
+}
+
+static struct platform_driver mbox_driver = {
+ .driver = {
+ .name = MBOX_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init mbox_init(void)
+{
+ return platform_driver_probe(&mbox_driver, mbox_probe);
+}
+
+module_init(mbox_init);
+
+void __exit mbox_exit(void)
+{
+ platform_driver_unregister(&mbox_driver);
+}
+
+module_exit(mbox_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MBOX driver");
diff --git a/arch/arm/mach-ux500/modem-irq-db5500.c b/arch/arm/mach-ux500/modem-irq-db5500.c
new file mode 100644
index 00000000000..6b86416c94c
--- /dev/null
+++ b/arch/arm/mach-ux500/modem-irq-db5500.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> for ST-Ericsson.
+ * Author: Martin Persson <martin.persson@stericsson.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#include <mach/id.h>
+
+#define MODEM_INTCON_BASE_ADDR 0xBFFD3000
+#define MODEM_INTCON_SIZE 0xFFF
+
+#define DEST_IRQ41_OFFSET 0x2A4
+#define DEST_IRQ43_OFFSET 0x2AC
+#define DEST_IRQ45_OFFSET 0x2B4
+
+#define PRIO_IRQ41_OFFSET 0x6A4
+#define PRIO_IRQ43_OFFSET 0x6AC
+#define PRIO_IRQ45_OFFSET 0x6B4
+
+#define ALLOW_IRQ_OFFSET 0x104
+
+#define MODEM_INTCON_CPU_NBR 0x1
+#define MODEM_INTCON_PRIO_HIGH 0x0
+
+#define MODEM_INTCON_ALLOW_IRQ41 0x0200
+#define MODEM_INTCON_ALLOW_IRQ43 0x0800
+#define MODEM_INTCON_ALLOW_IRQ45 0x2000
+
+#define MODEM_IRQ_REG_OFFSET 0x4
+
+struct modem_irq {
+ void __iomem *modem_intcon_base;
+};
+
+
+static void setup_modem_intcon(void __iomem *modem_intcon_base)
+{
+ /* IC_DESTINATION_BASE_ARRAY - Which CPU to receive the IRQ */
+ writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ41_OFFSET);
+ writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ43_OFFSET);
+ writel(MODEM_INTCON_CPU_NBR, modem_intcon_base + DEST_IRQ45_OFFSET);
+
+ /* IC_PRIORITY_BASE_ARRAY - IRQ priority in modem IRQ controller */
+ writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ41_OFFSET);
+ writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ43_OFFSET);
+ writel(MODEM_INTCON_PRIO_HIGH, modem_intcon_base + PRIO_IRQ45_OFFSET);
+
+ /* IC_ALLOW_ARRAY - IRQ enable */
+ writel(MODEM_INTCON_ALLOW_IRQ41 |
+ MODEM_INTCON_ALLOW_IRQ43 |
+ MODEM_INTCON_ALLOW_IRQ45,
+ modem_intcon_base + ALLOW_IRQ_OFFSET);
+}
+
+static irqreturn_t modem_cpu_irq_handler(int irq, void *data)
+{
+ int real_irq;
+ int virt_irq;
+ struct modem_irq *mi = (struct modem_irq *)data;
+
+ /* Read modem side IRQ number from modem IRQ controller */
+ real_irq = readl(mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET) & 0xFF;
+ virt_irq = IRQ_MODEM_EVENTS_BASE + real_irq;
+
+ pr_debug("modem_irq: Worker read addr 0x%X and got value 0x%X "
+ "which will be 0x%X (%d) which translates to "
+ "virtual IRQ 0x%X (%d)!\n",
+ (u32)mi->modem_intcon_base + MODEM_IRQ_REG_OFFSET,
+ real_irq,
+ real_irq & 0xFF,
+ real_irq & 0xFF,
+ virt_irq,
+ virt_irq);
+
+ if (virt_irq != 0)
+ generic_handle_irq(virt_irq);
+
+ pr_debug("modem_irq: Done handling virtual IRQ %d!\n", virt_irq);
+
+ return IRQ_HANDLED;
+}
+
+static void create_virtual_irq(int irq, struct irq_chip *modem_irq_chip)
+{
+ irq_set_chip_and_handler(irq, modem_irq_chip, handle_simple_irq);
+ set_irq_flags(irq, IRQF_VALID);
+
+ pr_debug("modem_irq: Created virtual IRQ %d\n", irq);
+}
+
+static int modem_irq_init(void)
+{
+ int err;
+ static struct irq_chip modem_irq_chip;
+ struct modem_irq *mi;
+
+ if (!cpu_is_u5500())
+ return -ENODEV;
+
+ pr_info("modem_irq: Set up IRQ handler for incoming modem IRQ %d\n",
+ IRQ_DB5500_MODEM);
+
+ mi = kmalloc(sizeof(struct modem_irq), GFP_KERNEL);
+ if (!mi) {
+ pr_err("modem_irq: Could not allocate device\n");
+ return -ENOMEM;
+ }
+
+ mi->modem_intcon_base =
+ ioremap(MODEM_INTCON_BASE_ADDR, MODEM_INTCON_SIZE);
+ pr_debug("modem_irq: ioremapped modem_intcon_base from "
+ "phy 0x%x to virt 0x%x\n", MODEM_INTCON_BASE_ADDR,
+ (u32)mi->modem_intcon_base);
+
+ setup_modem_intcon(mi->modem_intcon_base);
+
+ modem_irq_chip = dummy_irq_chip;
+ modem_irq_chip.name = "modem_irq";
+
+ /* Create the virtual IRQ:s needed */
+ create_virtual_irq(MBOX_PAIR0_VIRT_IRQ, &modem_irq_chip);
+ create_virtual_irq(MBOX_PAIR1_VIRT_IRQ, &modem_irq_chip);
+ create_virtual_irq(MBOX_PAIR2_VIRT_IRQ, &modem_irq_chip);
+
+ err = request_threaded_irq(IRQ_DB5500_MODEM, NULL,
+ modem_cpu_irq_handler, IRQF_ONESHOT,
+ "modem_irq", mi);
+ if (err)
+ pr_err("modem_irq: Could not register IRQ %d\n",
+ IRQ_DB5500_MODEM);
+
+ return 0;
+}
+
+arch_initcall(modem_irq_init);
diff --git a/arch/arm/mach-ux500/pins-db5500.h b/arch/arm/mach-ux500/pins-db5500.h
new file mode 100644
index 00000000000..bf50c21fe69
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db5500.h
@@ -0,0 +1,620 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_DB5500_PINS_H
+#define __MACH_DB5500_PINS_H
+
+#define GPIO0_GPIO PIN_CFG(0, GPIO)
+#define GPIO0_SM_CS3n PIN_CFG(0, ALT_A)
+
+#define GPIO1_GPIO PIN_CFG(1, GPIO)
+#define GPIO1_SM_A3 PIN_CFG(1, ALT_A)
+
+#define GPIO2_GPIO PIN_CFG(2, GPIO)
+#define GPIO2_SM_A4 PIN_CFG(2, ALT_A)
+#define GPIO2_SM_AVD PIN_CFG(2, ALT_B)
+
+#define GPIO3_GPIO PIN_CFG(3, GPIO)
+#define GPIO3_I2C1_SCL PIN_CFG(3, ALT_A)
+
+#define GPIO4_GPIO PIN_CFG(4, GPIO)
+#define GPIO4_I2C1_SDA PIN_CFG(4, ALT_A)
+
+#define GPIO5_GPIO PIN_CFG(5, GPIO)
+#define GPIO5_MC0_DAT0 PIN_CFG(5, ALT_A)
+#define GPIO5_SM_ADQ8 PIN_CFG(5, ALT_B)
+
+#define GPIO6_GPIO PIN_CFG(6, GPIO)
+#define GPIO6_MC0_DAT1 PIN_CFG(6, ALT_A)
+#define GPIO6_SM_ADQ0 PIN_CFG(6, ALT_B)
+
+#define GPIO7_GPIO PIN_CFG(7, GPIO)
+#define GPIO7_MC0_DAT2 PIN_CFG(7, ALT_A)
+#define GPIO7_SM_ADQ9 PIN_CFG(7, ALT_B)
+
+#define GPIO8_GPIO PIN_CFG(8, GPIO)
+#define GPIO8_MC0_DAT3 PIN_CFG(8, ALT_A)
+#define GPIO8_SM_ADQ1 PIN_CFG(8, ALT_B)
+
+#define GPIO9_GPIO PIN_CFG(9, GPIO)
+#define GPIO9_MC0_DAT4 PIN_CFG(9, ALT_A)
+#define GPIO9_SM_ADQ10 PIN_CFG(9, ALT_B)
+
+#define GPIO10_GPIO PIN_CFG(10, GPIO)
+#define GPIO10_MC0_DAT5 PIN_CFG(10, ALT_A)
+#define GPIO10_SM_ADQ2 PIN_CFG(10, ALT_B)
+
+#define GPIO11_GPIO PIN_CFG(11, GPIO)
+#define GPIO11_MC0_DAT6 PIN_CFG(11, ALT_A)
+#define GPIO11_SM_ADQ11 PIN_CFG(11, ALT_B)
+
+#define GPIO12_GPIO PIN_CFG(12, GPIO)
+#define GPIO12_MC0_DAT7 PIN_CFG(12, ALT_A)
+#define GPIO12_SM_ADQ3 PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO PIN_CFG(13, GPIO)
+#define GPIO13_MC0_CMD PIN_CFG(13, ALT_A)
+#define GPIO13_SM_BUSY0n PIN_CFG(13, ALT_B)
+#define GPIO13_SM_WAIT0n PIN_CFG(13, ALT_C)
+
+#define GPIO14_GPIO PIN_CFG(14, GPIO)
+#define GPIO14_MC0_CLK PIN_CFG(14, ALT_A)
+#define GPIO14_SM_CS1n PIN_CFG(14, ALT_B)
+#define GPIO14_SM_CKO PIN_CFG(14, ALT_C)
+
+#define GPIO15_GPIO PIN_CFG(15, GPIO)
+#define GPIO15_SM_A5 PIN_CFG(15, ALT_A)
+#define GPIO15_SM_CLE PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO PIN_CFG(16, GPIO)
+#define GPIO16_MC2_CMD PIN_CFG(16, ALT_A)
+#define GPIO16_SM_OEn PIN_CFG(16, ALT_B)
+
+#define GPIO17_GPIO PIN_CFG(17, GPIO)
+#define GPIO17_MC2_CLK PIN_CFG(17, ALT_A)
+#define GPIO17_SM_WEn PIN_CFG(17, ALT_B)
+
+#define GPIO18_GPIO PIN_CFG(18, GPIO)
+#define GPIO18_SM_A6 PIN_CFG(18, ALT_A)
+#define GPIO18_SM_ALE PIN_CFG(18, ALT_B)
+#define GPIO18_SM_AVDn PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO PIN_CFG(19, GPIO)
+#define GPIO19_MC2_DAT1 PIN_CFG(19, ALT_A)
+#define GPIO19_SM_ADQ4 PIN_CFG(19, ALT_B)
+
+#define GPIO20_GPIO PIN_CFG(20, GPIO)
+#define GPIO20_MC2_DAT3 PIN_CFG(20, ALT_A)
+#define GPIO20_SM_ADQ5 PIN_CFG(20, ALT_B)
+
+#define GPIO21_GPIO PIN_CFG(21, GPIO)
+#define GPIO21_MC2_DAT5 PIN_CFG(21, ALT_A)
+#define GPIO21_SM_ADQ6 PIN_CFG(21, ALT_B)
+
+#define GPIO22_GPIO PIN_CFG(22, GPIO)
+#define GPIO22_MC2_DAT7 PIN_CFG(22, ALT_A)
+#define GPIO22_SM_ADQ7 PIN_CFG(22, ALT_B)
+
+#define GPIO23_GPIO PIN_CFG(23, GPIO)
+#define GPIO23_MC2_DAT0 PIN_CFG(23, ALT_A)
+#define GPIO23_SM_ADQ12 PIN_CFG(23, ALT_B)
+#define GPIO23_MC0_DAT1 PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO PIN_CFG(24, GPIO)
+#define GPIO24_MC2_DAT2 PIN_CFG(24, ALT_A)
+#define GPIO24_SM_ADQ13 PIN_CFG(24, ALT_B)
+#define GPIO24_MC0_DAT3 PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO PIN_CFG(25, GPIO)
+#define GPIO25_MC2_DAT4 PIN_CFG(25, ALT_A)
+#define GPIO25_SM_ADQ14 PIN_CFG(25, ALT_B)
+#define GPIO25_MC0_CMD PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO PIN_CFG(26, GPIO)
+#define GPIO26_MC2_DAT6 PIN_CFG(26, ALT_A)
+#define GPIO26_SM_ADQ15 PIN_CFG(26, ALT_B)
+
+#define GPIO27_GPIO PIN_CFG(27, GPIO)
+#define GPIO27_SM_CS0n PIN_CFG(27, ALT_A)
+#define GPIO27_SM_PS0n PIN_CFG(27, ALT_B)
+
+#define GPIO28_GPIO PIN_CFG(28, GPIO)
+#define GPIO28_U0_TXD PIN_CFG(28, ALT_A)
+#define GPIO28_SM_A0 PIN_CFG(28, ALT_B)
+
+#define GPIO29_GPIO PIN_CFG(29, GPIO)
+#define GPIO29_U0_RXD PIN_CFG(29, ALT_A)
+#define GPIO29_SM_A1 PIN_CFG(29, ALT_B)
+#define GPIO29_PWM_0 PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A)
+#define GPIO30_SM_A2 PIN_CFG(30, ALT_B)
+#define GPIO30_PWM_1 PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT7 PIN_CFG(31, ALT_A)
+#define GPIO31_SM_CS2n PIN_CFG(31, ALT_B)
+#define GPIO31_PWM_2 PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO PIN_CFG(32, GPIO)
+#define GPIO32_MSP0_TCK PIN_CFG(32, ALT_A)
+#define GPIO32_ACCI2S0_SCK PIN_CFG(32, ALT_B)
+
+#define GPIO33_GPIO PIN_CFG(33, GPIO)
+#define GPIO33_MSP0_TFS PIN_CFG(33, ALT_A)
+#define GPIO33_ACCI2S0_WS PIN_CFG(33, ALT_B)
+
+#define GPIO34_GPIO PIN_CFG(34, GPIO)
+#define GPIO34_MSP0_TXD PIN_CFG(34, ALT_A)
+#define GPIO34_ACCI2S0_DLD PIN_CFG(34, ALT_B)
+
+#define GPIO35_GPIO PIN_CFG(35, GPIO)
+#define GPIO35_MSP0_RXD PIN_CFG(35, ALT_A)
+#define GPIO35_ACCI2S0_ULD PIN_CFG(35, ALT_B)
+
+#define GPIO64_GPIO PIN_CFG(64, GPIO)
+#define GPIO64_USB_DAT0 PIN_CFG(64, ALT_A)
+#define GPIO64_U0_TXD PIN_CFG(64, ALT_B)
+
+#define GPIO65_GPIO PIN_CFG(65, GPIO)
+#define GPIO65_USB_DAT1 PIN_CFG(65, ALT_A)
+#define GPIO65_U0_RXD PIN_CFG(65, ALT_B)
+
+#define GPIO66_GPIO PIN_CFG(66, GPIO)
+#define GPIO66_USB_DAT2 PIN_CFG(66, ALT_A)
+
+#define GPIO67_GPIO PIN_CFG(67, GPIO)
+#define GPIO67_USB_DAT3 PIN_CFG(67, ALT_A)
+
+#define GPIO68_GPIO PIN_CFG(68, GPIO)
+#define GPIO68_USB_DAT4 PIN_CFG(68, ALT_A)
+
+#define GPIO69_GPIO PIN_CFG(69, GPIO)
+#define GPIO69_USB_DAT5 PIN_CFG(69, ALT_A)
+
+#define GPIO70_GPIO PIN_CFG(70, GPIO)
+#define GPIO70_USB_DAT6 PIN_CFG(70, ALT_A)
+
+#define GPIO71_GPIO PIN_CFG(71, GPIO)
+#define GPIO71_USB_DAT7 PIN_CFG(71, ALT_A)
+
+#define GPIO72_GPIO PIN_CFG(72, GPIO)
+#define GPIO72_USB_STP PIN_CFG(72, ALT_A)
+
+#define GPIO73_GPIO PIN_CFG(73, GPIO)
+#define GPIO73_USB_DIR PIN_CFG(73, ALT_A)
+
+#define GPIO74_GPIO PIN_CFG(74, GPIO)
+#define GPIO74_USB_NXT PIN_CFG(74, ALT_A)
+
+#define GPIO75_GPIO PIN_CFG(75, GPIO)
+#define GPIO75_USB_XCLK PIN_CFG(75, ALT_A)
+
+#define GPIO76_GPIO PIN_CFG(76, GPIO)
+
+#define GPIO77_GPIO PIN_CFG(77, GPIO)
+#define GPIO77_ACCTX_ON PIN_CFG(77, ALT_A)
+
+#define GPIO78_GPIO PIN_CFG(78, GPIO)
+#define GPIO78_IRQn PIN_CFG(78, ALT_A)
+
+#define GPIO79_GPIO PIN_CFG(79, GPIO)
+#define GPIO79_ACCSIM_Clk PIN_CFG(79, ALT_A)
+
+#define GPIO80_GPIO PIN_CFG(80, GPIO)
+#define GPIO80_ACCSIM_Da PIN_CFG(80, ALT_A)
+
+#define GPIO81_GPIO PIN_CFG(81, GPIO)
+#define GPIO81_ACCSIM_Reset PIN_CFG(81, ALT_A)
+
+#define GPIO82_GPIO PIN_CFG(82, GPIO)
+#define GPIO82_ACCSIM_DDir PIN_CFG(82, ALT_A)
+
+#define GPIO96_GPIO PIN_CFG(96, GPIO)
+#define GPIO96_MSP1_TCK PIN_CFG(96, ALT_A)
+#define GPIO96_PRCMU_DEBUG3 PIN_CFG(96, ALT_B)
+#define GPIO96_PRCMU_DEBUG7 PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO PIN_CFG(97, GPIO)
+#define GPIO97_MSP1_TFS PIN_CFG(97, ALT_A)
+#define GPIO97_PRCMU_DEBUG2 PIN_CFG(97, ALT_B)
+#define GPIO97_PRCMU_DEBUG6 PIN_CFG(97, ALT_C)
+
+#define GPIO98_GPIO PIN_CFG(98, GPIO)
+#define GPIO98_MSP1_TXD PIN_CFG(98, ALT_A)
+#define GPIO98_PRCMU_DEBUG1 PIN_CFG(98, ALT_B)
+#define GPIO98_PRCMU_DEBUG5 PIN_CFG(98, ALT_C)
+
+#define GPIO99_GPIO PIN_CFG(99, GPIO)
+#define GPIO99_MSP1_RXD PIN_CFG(99, ALT_A)
+#define GPIO99_PRCMU_DEBUG0 PIN_CFG(99, ALT_B)
+#define GPIO99_PRCMU_DEBUG4 PIN_CFG(99, ALT_C)
+
+#define GPIO100_GPIO PIN_CFG(100, GPIO)
+#define GPIO100_I2C0_SCL PIN_CFG(100, ALT_A)
+
+#define GPIO101_GPIO PIN_CFG(101, GPIO)
+#define GPIO101_I2C0_SDA PIN_CFG(101, ALT_A)
+
+#define GPIO128_GPIO PIN_CFG(128, GPIO)
+#define GPIO128_KP_I0 PIN_CFG(128, ALT_A)
+#define GPIO128_BUSMON_D0 PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO PIN_CFG(129, GPIO)
+#define GPIO129_KP_O0 PIN_CFG(129, ALT_A)
+#define GPIO129_BUSMON_D1 PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO PIN_CFG(130, GPIO)
+#define GPIO130_KP_I1 PIN_CFG(130, ALT_A)
+#define GPIO130_BUSMON_D2 PIN_CFG(130, ALT_B)
+
+#define GPIO131_GPIO PIN_CFG(131, GPIO)
+#define GPIO131_KP_O1 PIN_CFG(131, ALT_A)
+#define GPIO131_BUSMON_D3 PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO PIN_CFG(132, GPIO)
+#define GPIO132_KP_I2 PIN_CFG(132, ALT_A)
+#define GPIO132_ETM_D15 PIN_CFG(132, ALT_B)
+#define GPIO132_STMAPE_CLK PIN_CFG(132, ALT_C)
+
+#define GPIO133_GPIO PIN_CFG(133, GPIO)
+#define GPIO133_KP_O2 PIN_CFG(133, ALT_A)
+#define GPIO133_ETM_D14 PIN_CFG(133, ALT_B)
+#define GPIO133_U0_RXD PIN_CFG(133, ALT_C)
+
+#define GPIO134_GPIO PIN_CFG(134, GPIO)
+#define GPIO134_KP_I3 PIN_CFG(134, ALT_A)
+#define GPIO134_ETM_D13 PIN_CFG(134, ALT_B)
+#define GPIO134_STMAPE_DAT0 PIN_CFG(134, ALT_C)
+
+#define GPIO135_GPIO PIN_CFG(135, GPIO)
+#define GPIO135_KP_O3 PIN_CFG(135, ALT_A)
+#define GPIO135_ETM_D12 PIN_CFG(135, ALT_B)
+#define GPIO135_STMAPE_DAT1 PIN_CFG(135, ALT_C)
+
+#define GPIO136_GPIO PIN_CFG(136, GPIO)
+#define GPIO136_KP_I4 PIN_CFG(136, ALT_A)
+#define GPIO136_ETM_D11 PIN_CFG(136, ALT_B)
+#define GPIO136_STMAPE_DAT2 PIN_CFG(136, ALT_C)
+
+#define GPIO137_GPIO PIN_CFG(137, GPIO)
+#define GPIO137_KP_O4 PIN_CFG(137, ALT_A)
+#define GPIO137_ETM_D10 PIN_CFG(137, ALT_B)
+#define GPIO137_STMAPE_DAT3 PIN_CFG(137, ALT_C)
+
+#define GPIO138_GPIO PIN_CFG(138, GPIO)
+#define GPIO138_KP_I5 PIN_CFG(138, ALT_A)
+#define GPIO138_ETM_D9 PIN_CFG(138, ALT_B)
+#define GPIO138_U0_TXD PIN_CFG(138, ALT_C)
+
+#define GPIO139_GPIO PIN_CFG(139, GPIO)
+#define GPIO139_KP_O5 PIN_CFG(139, ALT_A)
+#define GPIO139_ETM_D8 PIN_CFG(139, ALT_B)
+#define GPIO139_BUSMON_D11 PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO PIN_CFG(140, GPIO)
+#define GPIO140_KP_I6 PIN_CFG(140, ALT_A)
+#define GPIO140_ETM_D7 PIN_CFG(140, ALT_B)
+#define GPIO140_STMAPE_CLK PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO PIN_CFG(141, GPIO)
+#define GPIO141_KP_O6 PIN_CFG(141, ALT_A)
+#define GPIO141_ETM_D6 PIN_CFG(141, ALT_B)
+#define GPIO141_U0_RXD PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO PIN_CFG(142, GPIO)
+#define GPIO142_KP_I7 PIN_CFG(142, ALT_A)
+#define GPIO142_ETM_D5 PIN_CFG(142, ALT_B)
+#define GPIO142_STMAPE_DAT0 PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO PIN_CFG(143, GPIO)
+#define GPIO143_KP_O7 PIN_CFG(143, ALT_A)
+#define GPIO143_ETM_D4 PIN_CFG(143, ALT_B)
+#define GPIO143_STMAPE_DAT1 PIN_CFG(143, ALT_C)
+
+#define GPIO144_GPIO PIN_CFG(144, GPIO)
+#define GPIO144_I2C3_SCL PIN_CFG(144, ALT_A)
+#define GPIO144_ETM_D3 PIN_CFG(144, ALT_B)
+#define GPIO144_STMAPE_DAT2 PIN_CFG(144, ALT_C)
+
+#define GPIO145_GPIO PIN_CFG(145, GPIO)
+#define GPIO145_I2C3_SDA PIN_CFG(145, ALT_A)
+#define GPIO145_ETM_D2 PIN_CFG(145, ALT_B)
+#define GPIO145_STMAPE_DAT3 PIN_CFG(145, ALT_C)
+
+#define GPIO146_GPIO PIN_CFG(146, GPIO)
+#define GPIO146_PWM_0 PIN_CFG(146, ALT_A)
+#define GPIO146_ETM_D1 PIN_CFG(146, ALT_B)
+
+#define GPIO147_GPIO PIN_CFG(147, GPIO)
+#define GPIO147_PWM_1 PIN_CFG(147, ALT_A)
+#define GPIO147_ETM_D0 PIN_CFG(147, ALT_B)
+
+#define GPIO148_GPIO PIN_CFG(148, GPIO)
+#define GPIO148_PWM_2 PIN_CFG(148, ALT_A)
+#define GPIO148_ETM_CLK PIN_CFG(148, ALT_B)
+
+#define GPIO160_GPIO PIN_CFG(160, GPIO)
+#define GPIO160_CLKOUT_REQn PIN_CFG(160, ALT_A)
+
+#define GPIO161_GPIO PIN_CFG(161, GPIO)
+#define GPIO161_CLKOUT_0 PIN_CFG(161, ALT_A)
+
+#define GPIO162_GPIO PIN_CFG(162, GPIO)
+#define GPIO162_CLKOUT_1 PIN_CFG(162, ALT_A)
+
+#define GPIO163_GPIO PIN_CFG(163, GPIO)
+
+#define GPIO164_GPIO PIN_CFG(164, GPIO)
+#define GPIO164_GPS_START PIN_CFG(164, ALT_A)
+
+#define GPIO165_GPIO PIN_CFG(165, GPIO)
+#define GPIO165_SPI1_CS2n PIN_CFG(165, ALT_A)
+#define GPIO165_U3_RXD PIN_CFG(165, ALT_B)
+#define GPIO165_BUSMON_D20 PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO PIN_CFG(166, GPIO)
+#define GPIO166_SPI1_CS1n PIN_CFG(166, ALT_A)
+#define GPIO166_U3_TXD PIN_CFG(166, ALT_B)
+#define GPIO166_BUSMON_D21 PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO PIN_CFG(167, GPIO)
+#define GPIO167_SPI1_CS0n PIN_CFG(167, ALT_A)
+#define GPIO167_U3_RTSn PIN_CFG(167, ALT_B)
+#define GPIO167_BUSMON_D22 PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO PIN_CFG(168, GPIO)
+#define GPIO168_SPI1_RXD PIN_CFG(168, ALT_A)
+#define GPIO168_U3_CTSn PIN_CFG(168, ALT_B)
+#define GPIO168_BUSMON_D23 PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO PIN_CFG(169, GPIO)
+#define GPIO169_SPI1_TXD PIN_CFG(169, ALT_A)
+#define GPIO169_DDR_RC PIN_CFG(169, ALT_B)
+#define GPIO169_BUSMON_D24 PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO PIN_CFG(170, GPIO)
+#define GPIO170_SPI1_CLK PIN_CFG(170, ALT_A)
+
+#define GPIO171_GPIO PIN_CFG(171, GPIO)
+#define GPIO171_MC3_DAT0 PIN_CFG(171, ALT_A)
+#define GPIO171_SPI3_RXD PIN_CFG(171, ALT_B)
+#define GPIO171_BUSMON_D25 PIN_CFG(171, ALT_C)
+
+#define GPIO172_GPIO PIN_CFG(172, GPIO)
+#define GPIO172_MC3_DAT1 PIN_CFG(172, ALT_A)
+#define GPIO172_SPI3_CS1n PIN_CFG(172, ALT_B)
+#define GPIO172_BUSMON_D26 PIN_CFG(172, ALT_C)
+
+#define GPIO173_GPIO PIN_CFG(173, GPIO)
+#define GPIO173_MC3_DAT2 PIN_CFG(173, ALT_A)
+#define GPIO173_SPI3_CS2n PIN_CFG(173, ALT_B)
+#define GPIO173_BUSMON_D27 PIN_CFG(173, ALT_C)
+
+#define GPIO174_GPIO PIN_CFG(174, GPIO)
+#define GPIO174_MC3_DAT3 PIN_CFG(174, ALT_A)
+#define GPIO174_SPI3_CS0n PIN_CFG(174, ALT_B)
+#define GPIO174_BUSMON_D28 PIN_CFG(174, ALT_C)
+
+#define GPIO175_GPIO PIN_CFG(175, GPIO)
+#define GPIO175_MC3_CMD PIN_CFG(175, ALT_A)
+#define GPIO175_SPI3_TXD PIN_CFG(175, ALT_B)
+#define GPIO175_BUSMON_D29 PIN_CFG(175, ALT_C)
+
+#define GPIO176_GPIO PIN_CFG(176, GPIO)
+#define GPIO176_MC3_CLK PIN_CFG(176, ALT_A)
+#define GPIO176_SPI3_CLK PIN_CFG(176, ALT_B)
+
+#define GPIO177_GPIO PIN_CFG(177, GPIO)
+#define GPIO177_U2_RXD PIN_CFG(177, ALT_A)
+#define GPIO177_I2C3_SCL PIN_CFG(177, ALT_B)
+#define GPIO177_BUSMON_D30 PIN_CFG(177, ALT_C)
+
+#define GPIO178_GPIO PIN_CFG(178, GPIO)
+#define GPIO178_U2_TXD PIN_CFG(178, ALT_A)
+#define GPIO178_I2C3_SDA PIN_CFG(178, ALT_B)
+#define GPIO178_BUSMON_D31 PIN_CFG(178, ALT_C)
+
+#define GPIO179_GPIO PIN_CFG(179, GPIO)
+#define GPIO179_U2_CTSn PIN_CFG(179, ALT_A)
+#define GPIO179_U3_RXD PIN_CFG(179, ALT_B)
+#define GPIO179_BUSMON_D32 PIN_CFG(179, ALT_C)
+
+#define GPIO180_GPIO PIN_CFG(180, GPIO)
+#define GPIO180_U2_RTSn PIN_CFG(180, ALT_A)
+#define GPIO180_U3_TXD PIN_CFG(180, ALT_B)
+#define GPIO180_BUSMON_D33 PIN_CFG(180, ALT_C)
+
+#define GPIO185_GPIO PIN_CFG(185, GPIO)
+#define GPIO185_SPI3_CS2n PIN_CFG(185, ALT_A)
+#define GPIO185_MC4_DAT0 PIN_CFG(185, ALT_B)
+
+#define GPIO186_GPIO PIN_CFG(186, GPIO)
+#define GPIO186_SPI3_CS1n PIN_CFG(186, ALT_A)
+#define GPIO186_MC4_DAT1 PIN_CFG(186, ALT_B)
+
+#define GPIO187_GPIO PIN_CFG(187, GPIO)
+#define GPIO187_SPI3_CS0n PIN_CFG(187, ALT_A)
+#define GPIO187_MC4_DAT2 PIN_CFG(187, ALT_B)
+
+#define GPIO188_GPIO PIN_CFG(188, GPIO)
+#define GPIO188_SPI3_RXD PIN_CFG(188, ALT_A)
+#define GPIO188_MC4_DAT3 PIN_CFG(188, ALT_B)
+
+#define GPIO189_GPIO PIN_CFG(189, GPIO)
+#define GPIO189_SPI3_TXD PIN_CFG(189, ALT_A)
+#define GPIO189_MC4_CMD PIN_CFG(189, ALT_B)
+
+#define GPIO190_GPIO PIN_CFG(190, GPIO)
+#define GPIO190_SPI3_CLK PIN_CFG(190, ALT_A)
+#define GPIO190_MC4_CLK PIN_CFG(190, ALT_B)
+
+#define GPIO191_GPIO PIN_CFG(191, GPIO)
+#define GPIO191_MC1_DAT0 PIN_CFG(191, ALT_A)
+#define GPIO191_MC4_DAT4 PIN_CFG(191, ALT_B)
+#define GPIO191_STMAPE_DAT0 PIN_CFG(191, ALT_C)
+
+#define GPIO192_GPIO PIN_CFG(192, GPIO)
+#define GPIO192_MC1_DAT1 PIN_CFG(192, ALT_A)
+#define GPIO192_MC4_DAT5 PIN_CFG(192, ALT_B)
+#define GPIO192_STMAPE_DAT1 PIN_CFG(192, ALT_C)
+
+#define GPIO193_GPIO PIN_CFG(193, GPIO)
+#define GPIO193_MC1_DAT2 PIN_CFG(193, ALT_A)
+#define GPIO193_MC4_DAT6 PIN_CFG(193, ALT_B)
+#define GPIO193_STMAPE_DAT2 PIN_CFG(193, ALT_C)
+
+#define GPIO194_GPIO PIN_CFG(194, GPIO)
+#define GPIO194_MC1_DAT3 PIN_CFG(194, ALT_A)
+#define GPIO194_MC4_DAT7 PIN_CFG(194, ALT_B)
+#define GPIO194_STMAPE_DAT3 PIN_CFG(194, ALT_C)
+
+#define GPIO195_GPIO PIN_CFG(195, GPIO)
+#define GPIO195_MC1_CLK PIN_CFG(195, ALT_A)
+#define GPIO195_STMAPE_CLK PIN_CFG(195, ALT_B)
+#define GPIO195_BUSMON_CLK PIN_CFG(195, ALT_C)
+
+#define GPIO196_GPIO PIN_CFG(196, GPIO)
+#define GPIO196_MC1_CMD PIN_CFG(196, ALT_A)
+#define GPIO196_U0_RXD PIN_CFG(196, ALT_B)
+#define GPIO196_BUSMON_D38 PIN_CFG(196, ALT_C)
+
+#define GPIO197_GPIO PIN_CFG(197, GPIO)
+#define GPIO197_MC1_CMDDIR PIN_CFG(197, ALT_A)
+#define GPIO197_BUSMON_D39 PIN_CFG(197, ALT_B)
+
+#define GPIO198_GPIO PIN_CFG(198, GPIO)
+#define GPIO198_MC1_FBCLK PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO PIN_CFG(199, GPIO)
+#define GPIO199_MC1_DAT0DIR PIN_CFG(199, ALT_A)
+#define GPIO199_BUSMON_D40 PIN_CFG(199, ALT_B)
+
+#define GPIO200_GPIO PIN_CFG(200, GPIO)
+#define GPIO200_U1_TXD PIN_CFG(200, ALT_A)
+#define GPIO200_ACCU0_RTSn PIN_CFG(200, ALT_B)
+
+#define GPIO201_GPIO PIN_CFG(201, GPIO)
+#define GPIO201_U1_RXD PIN_CFG(201, ALT_A)
+#define GPIO201_ACCU0_CTSn PIN_CFG(201, ALT_B)
+
+#define GPIO202_GPIO PIN_CFG(202, GPIO)
+#define GPIO202_U1_CTSn PIN_CFG(202, ALT_A)
+#define GPIO202_ACCU0_RXD PIN_CFG(202, ALT_B)
+
+#define GPIO203_GPIO PIN_CFG(203, GPIO)
+#define GPIO203_U1_RTSn PIN_CFG(203, ALT_A)
+#define GPIO203_ACCU0_TXD PIN_CFG(203, ALT_B)
+
+#define GPIO204_GPIO PIN_CFG(204, GPIO)
+#define GPIO204_SPI0_CS2n PIN_CFG(204, ALT_A)
+#define GPIO204_ACCGPIO_000 PIN_CFG(204, ALT_B)
+#define GPIO204_LCD_VSI1 PIN_CFG(204, ALT_C)
+
+#define GPIO205_GPIO PIN_CFG(205, GPIO)
+#define GPIO205_SPI0_CS1n PIN_CFG(205, ALT_A)
+#define GPIO205_ACCGPIO_001 PIN_CFG(205, ALT_B)
+#define GPIO205_LCD_D3 PIN_CFG(205, ALT_C)
+
+#define GPIO206_GPIO PIN_CFG(206, GPIO)
+#define GPIO206_SPI0_CS0n PIN_CFG(206, ALT_A)
+#define GPIO206_ACCGPIO_002 PIN_CFG(206, ALT_B)
+#define GPIO206_LCD_D2 PIN_CFG(206, ALT_C)
+
+#define GPIO207_GPIO PIN_CFG(207, GPIO)
+#define GPIO207_SPI0_RXD PIN_CFG(207, ALT_A)
+#define GPIO207_ACCGPIO_003 PIN_CFG(207, ALT_B)
+#define GPIO207_LCD_D1 PIN_CFG(207, ALT_C)
+
+#define GPIO208_GPIO PIN_CFG(208, GPIO)
+#define GPIO208_SPI0_TXD PIN_CFG(208, ALT_A)
+#define GPIO208_ACCGPIO_004 PIN_CFG(208, ALT_B)
+#define GPIO208_LCD_D0 PIN_CFG(208, ALT_C)
+
+#define GPIO209_GPIO PIN_CFG(209, GPIO)
+#define GPIO209_SPI0_CLK PIN_CFG(209, ALT_A)
+#define GPIO209_ACCGPIO_005 PIN_CFG(209, ALT_B)
+#define GPIO209_LCD_CLK PIN_CFG(209, ALT_C)
+
+#define GPIO210_GPIO PIN_CFG(210, GPIO)
+#define GPIO210_LCD_VSO PIN_CFG(210, ALT_A)
+#define GPIO210_PRCMU_PWRCTRL1 PIN_CFG(210, ALT_B)
+
+#define GPIO211_GPIO PIN_CFG(211, GPIO)
+#define GPIO211_LCD_VSI0 PIN_CFG(211, ALT_A)
+#define GPIO211_PRCMU_PWRCTRL2 PIN_CFG(211, ALT_B)
+
+#define GPIO212_GPIO PIN_CFG(212, GPIO)
+#define GPIO212_SPI2_CS2n PIN_CFG(212, ALT_A)
+#define GPIO212_LCD_HSO PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO PIN_CFG(213, GPIO)
+#define GPIO213_SPI2_CS1n PIN_CFG(213, ALT_A)
+#define GPIO213_LCD_DE PIN_CFG(213, ALT_B)
+#define GPIO213_BUSMON_D16 PIN_CFG(213, ALT_C)
+
+#define GPIO214_GPIO PIN_CFG(214, GPIO)
+#define GPIO214_SPI2_CS0n PIN_CFG(214, ALT_A)
+#define GPIO214_LCD_D7 PIN_CFG(214, ALT_B)
+#define GPIO214_BUSMON_D17 PIN_CFG(214, ALT_C)
+
+#define GPIO215_GPIO PIN_CFG(215, GPIO)
+#define GPIO215_SPI2_RXD PIN_CFG(215, ALT_A)
+#define GPIO215_LCD_D6 PIN_CFG(215, ALT_B)
+#define GPIO215_BUSMON_D18 PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO PIN_CFG(216, GPIO)
+#define GPIO216_SPI2_CLK PIN_CFG(216, ALT_A)
+#define GPIO216_LCD_D5 PIN_CFG(216, ALT_B)
+
+#define GPIO217_GPIO PIN_CFG(217, GPIO)
+#define GPIO217_SPI2_TXD PIN_CFG(217, ALT_A)
+#define GPIO217_LCD_D4 PIN_CFG(217, ALT_B)
+#define GPIO217_BUSMON_D19 PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO PIN_CFG(218, GPIO)
+#define GPIO218_I2C2_SCL PIN_CFG(218, ALT_A)
+#define GPIO218_LCD_VSO PIN_CFG(218, ALT_B)
+
+#define GPIO219_GPIO PIN_CFG(219, GPIO)
+#define GPIO219_I2C2_SDA PIN_CFG(219, ALT_A)
+#define GPIO219_LCD_D3 PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO PIN_CFG(220, GPIO)
+#define GPIO220_MSP2_TCK PIN_CFG(220, ALT_A)
+#define GPIO220_LCD_D2 PIN_CFG(220, ALT_B)
+
+#define GPIO221_GPIO PIN_CFG(221, GPIO)
+#define GPIO221_MSP2_TFS PIN_CFG(221, ALT_A)
+#define GPIO221_LCD_D1 PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO PIN_CFG(222, GPIO)
+#define GPIO222_MSP2_TXD PIN_CFG(222, ALT_A)
+#define GPIO222_LCD_D0 PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO PIN_CFG(223, GPIO)
+#define GPIO223_MSP2_RXD PIN_CFG(223, ALT_A)
+#define GPIO223_LCD_CLK PIN_CFG(223, ALT_B)
+
+#define GPIO224_GPIO PIN_CFG(224, GPIO)
+#define GPIO224_PRCMU_PWRCTRL0 PIN_CFG(224, ALT_A)
+#define GPIO224_LCD_VSI1 PIN_CFG(224, ALT_B)
+
+#define GPIO225_GPIO PIN_CFG(225, GPIO)
+#define GPIO225_PRCMU_PWRCTRL1 PIN_CFG(225, ALT_A)
+#define GPIO225_IRDA_RXD PIN_CFG(225, ALT_B)
+
+#define GPIO226_GPIO PIN_CFG(226, GPIO)
+#define GPIO226_PRCMU_PWRCTRL2 PIN_CFG(226, ALT_A)
+#define GPIO226_IRRC_DAT PIN_CFG(226, ALT_B)
+
+#define GPIO227_GPIO PIN_CFG(227, GPIO)
+#define GPIO227_IRRC_DAT PIN_CFG(227, ALT_A)
+#define GPIO227_IRDA_TXD PIN_CFG(227, ALT_B)
+
+#endif
diff --git a/arch/arm/mach-ux500/pins-db8500.h b/arch/arm/mach-ux500/pins-db8500.h
new file mode 100644
index 00000000000..8b1d1a7a679
--- /dev/null
+++ b/arch/arm/mach-ux500/pins-db8500.h
@@ -0,0 +1,746 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __MACH_PINS_DB8500_H
+#define __MACH_PINS_DB8500_H
+
+/*
+ * TODO: Eventually encode all non-board specific pull up/down configuration
+ * here.
+ */
+
+#define GPIO0_GPIO PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD PIN_CFG(2, ALT_A)
+#define GPIO2_NONE PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD PIN_CFG(3, ALT_A)
+#define GPIO3_NONE PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL PIN_CFG_INPUT(4, ALT_B, PULLUP)
+#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA PIN_CFG_INPUT(5, ALT_B, PULLUP)
+#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL PIN_CFG_INPUT(6, ALT_B, PULLUP)
+#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA PIN_CFG_INPUT(7, ALT_B, PULLUP)
+#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA PIN_CFG_INPUT(8, ALT_A, PULLUP)
+#define GPIO8_I2C2_SDA PIN_CFG_INPUT(8, ALT_B, PULLUP)
+
+#define GPIO9_GPIO PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL PIN_CFG_INPUT(9, ALT_A, PULLUP)
+#define GPIO9_I2C2_SCL PIN_CFG_INPUT(9, ALT_B, PULLUP)
+
+#define GPIO10_GPIO PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA PIN_CFG_INPUT(10, ALT_A, PULLUP)
+#define GPIO10_I2C2_SDA PIN_CFG_INPUT(10, ALT_B, PULLUP)
+#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL PIN_CFG_INPUT(11, ALT_A, PULLUP)
+#define GPIO11_I2C2_SCL PIN_CFG_INPUT(11, ALT_B, PULLUP)
+#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL PIN_CFG_INPUT(16, ALT_B, PULLUP)
+#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA PIN_CFG_INPUT(17, ALT_B, PULLUP)
+#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR PIN_CFG_INPUT(18, ALT_A, PULLUP)
+#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR PIN_CFG_INPUT(19, ALT_A, PULLUP)
+#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR PIN_CFG_INPUT(20, ALT_A, PULLUP)
+#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR PIN_CFG_INPUT(21, ALT_A, PULLUP)
+#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK PIN_CFG_INPUT(22, ALT_A, PULLUP)
+#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK PIN_CFG_INPUT(23, ALT_A, PULLUP)
+#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD PIN_CFG_INPUT(24, ALT_A, PULLUP)
+#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0 PIN_CFG_INPUT(25, ALT_A, PULLUP)
+#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1 PIN_CFG_INPUT(26, ALT_A, PULLUP)
+#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2 PIN_CFG_INPUT(27, ALT_A, PULLUP)
+#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3 PIN_CFG_INPUT(28, ALT_A, PULLUP)
+#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A)
+#define GPIO34_NONE PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A)
+#define GPIO35_NONE PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1 PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0 PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1 PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0 PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7 PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7 PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5 PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4 PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3 PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2 PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5 PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4 PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3 PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2 PIN_CFG(77, ALT_B)
+#define GPIO77_NONE PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6 PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6 PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5 PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4 PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO PIN_CFG(84, GPIO)
+#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5 PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4 PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7 PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7 PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6 PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6 PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK PIN_CFG_INPUT(128, ALT_A, PULLUP)
+#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD PIN_CFG_INPUT(129, ALT_A, PULLUP)
+#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK PIN_CFG_INPUT(130, ALT_A, PULLUP)
+#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0 PIN_CFG_INPUT(131, ALT_A, PULLUP)
+#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1 PIN_CFG_INPUT(132, ALT_A, PULLUP)
+#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2 PIN_CFG_INPUT(133, ALT_A, PULLUP)
+#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3 PIN_CFG_INPUT(134, ALT_A, PULLUP)
+#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4 PIN_CFG_INPUT(135, ALT_A, PULLUP)
+#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5 PIN_CFG_INPUT(136, ALT_A, PULLUP)
+#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6 PIN_CFG_INPUT(137, ALT_A, PULLUP)
+#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7 PIN_CFG_INPUT(138, ALT_A, PULLUP)
+#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8 PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9 PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL PIN_CFG_INPUT(147, ALT_A, PULLUP)
+
+#define GPIO148_GPIO PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA PIN_CFG_INPUT(148, ALT_A, PULLUP)
+
+#define GPIO149_GPIO PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8 PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7 PIN_CFG_INPUT(153, ALT_A, PULLDOWN)
+#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6 PIN_CFG_INPUT(154, ALT_A, PULLDOWN)
+#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5 PIN_CFG_INPUT(155, ALT_A, PULLDOWN)
+#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4 PIN_CFG_INPUT(156, ALT_A, PULLDOWN)
+#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7 PIN_CFG_INPUT(157, ALT_A, PULLUP)
+#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6 PIN_CFG_INPUT(158, ALT_A, PULLUP)
+#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5 PIN_CFG_INPUT(159, ALT_A, PULLUP)
+#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4 PIN_CFG_INPUT(160, ALT_A, PULLUP)
+#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
+#define GPIO160_NONE PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3 PIN_CFG_INPUT(161, ALT_A, PULLDOWN)
+#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2 PIN_CFG_INPUT(162, ALT_A, PULLDOWN)
+#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1 PIN_CFG_INPUT(163, ALT_A, PULLDOWN)
+#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0 PIN_CFG_INPUT(164, ALT_A, PULLUP)
+#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3 PIN_CFG_INPUT(165, ALT_A, PULLUP)
+#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2 PIN_CFG_INPUT(166, ALT_A, PULLUP)
+#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1 PIN_CFG_INPUT(167, ALT_A, PULLUP)
+#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0 PIN_CFG_INPUT(168, ALT_A, PULLUP)
+#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
+#define GPIO168_NONE PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3 PIN_CFG_INPUT(197, ALT_A, PULLUP)
+
+#define GPIO198_GPIO PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2 PIN_CFG_INPUT(198, ALT_A, PULLUP)
+
+#define GPIO199_GPIO PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1 PIN_CFG_INPUT(199, ALT_A, PULLUP)
+
+#define GPIO200_GPIO PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0 PIN_CFG_INPUT(200, ALT_A, PULLUP)
+
+#define GPIO201_GPIO PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD PIN_CFG_INPUT(201, ALT_A, PULLUP)
+
+#define GPIO202_GPIO PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK PIN_CFG_INPUT(202, ALT_A, PULLUP)
+#define GPIO202_PWL PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK PIN_CFG_INPUT(203, ALT_A, PULLUP)
+
+#define GPIO204_GPIO PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7 PIN_CFG_INPUT(204, ALT_A, PULLUP)
+
+#define GPIO205_GPIO PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6 PIN_CFG_INPUT(205, ALT_A, PULLUP)
+
+#define GPIO206_GPIO PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5 PIN_CFG_INPUT(206, ALT_A, PULLUP)
+
+#define GPIO207_GPIO PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4 PIN_CFG_INPUT(207, ALT_A, PULLUP)
+
+#define GPIO208_GPIO PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
+#define GPIO215_SPI2_TXD PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA PIN_CFG_INPUT(216, ALT_C, PULLUP)
+#define GPIO216_SPI2_FRM PIN_CFG(216, ALT_C)
+
+#define GPIO217_GPIO PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
+#define GPIO217_SPI2_CLK PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL PIN_CFG_INPUT(218, ALT_C, PULLUP)
+#define GPIO218_SPI2_RXD PIN_CFG(218, ALT_C)
+
+#define GPIO219_GPIO PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A)
+#define GPIO226_PWL PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
+#define GPIO229_PWL PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA PIN_CFG_INPUT(229, ALT_C, PULLUP)
+
+#define GPIO230_GPIO PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
+#define GPIO230_PWL PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL PIN_CFG_INPUT(230, ALT_C, PULLUP)
+
+#define GPIO256_GPIO PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A)
+#define GPIO258_NONE PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 00000000000..d2058ef8345
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/gic.h>
+#include <asm/smp_plat.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+/* This is called from headsmp.S to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int pen_release = -1;
+
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not. This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+ pen_release = val;
+ smp_wmb();
+ __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+ outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
+static void __iomem *scu_base_addr(void)
+{
+ if (cpu_is_u5500())
+ return __io_address(U5500_SCU_BASE);
+ else if (cpu_is_u8500())
+ return __io_address(U8500_SCU_BASE);
+ else
+ ux500_unknown_soc();
+
+ return NULL;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ gic_secondary_init(0);
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ write_pen_release(-1);
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ */
+ write_pen_release(cpu_logical_map(cpu));
+
+ gic_raise_softirq(cpumask_of(cpu), 1);
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ if (pen_release == -1)
+ break;
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ void __iomem *backupram;
+
+ if (cpu_is_u5500())
+ backupram = __io_address(U5500_BACKUPRAM0_BASE);
+ else if (cpu_is_u8500())
+ backupram = __io_address(U8500_BACKUPRAM0_BASE);
+ else
+ ux500_unknown_soc();
+
+ /*
+ * write the address of secondary startup into the backup ram register
+ * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+ * backup ram register at offset 0x1FF0, which is what boot rom code
+ * is waiting for. This would wake up the secondary core from WFE
+ */
+#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4
+ __raw_writel(virt_to_phys(u8500_secondary_startup),
+ backupram + UX500_CPU1_JUMPADDR_OFFSET);
+
+#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+ __raw_writel(0xA1FEED01,
+ backupram + UX500_CPU1_WAKEMAGIC_OFFSET);
+
+ /* make sure write buffer is drained */
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ void __iomem *scu_base = scu_base_addr();
+ unsigned int i, ncores;
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ /* sanity check */
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ set_smp_cross_call(gic_raise_softirq);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+
+ scu_enable(scu_base_addr());
+ wakeup_secondary();
+}
diff --git a/arch/arm/mach-ux500/ste-dma40-db5500.h b/arch/arm/mach-ux500/ste-dma40-db5500.h
new file mode 100644
index 00000000000..cb2110c3285
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db5500.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * DB5500-SoC-specific configuration for DMA40
+ */
+
+#ifndef STE_DMA40_DB5500_H
+#define STE_DMA40_DB5500_H
+
+#define DB5500_DMA_NR_DEV 64
+
+enum dma_src_dev_type {
+ DB5500_DMA_DEV0_SPI0_RX = 0,
+ DB5500_DMA_DEV1_SPI1_RX = 1,
+ DB5500_DMA_DEV2_SPI2_RX = 2,
+ DB5500_DMA_DEV3_SPI3_RX = 3,
+ DB5500_DMA_DEV4_USB_OTG_IEP_1_9 = 4,
+ DB5500_DMA_DEV5_USB_OTG_IEP_2_10 = 5,
+ DB5500_DMA_DEV6_USB_OTG_IEP_3_11 = 6,
+ DB5500_DMA_DEV7_IRDA_RFS = 7,
+ DB5500_DMA_DEV8_IRDA_FIFO_RX = 8,
+ DB5500_DMA_DEV9_MSP0_RX = 9,
+ DB5500_DMA_DEV10_MSP1_RX = 10,
+ DB5500_DMA_DEV11_MSP2_RX = 11,
+ DB5500_DMA_DEV12_UART0_RX = 12,
+ DB5500_DMA_DEV13_UART1_RX = 13,
+ DB5500_DMA_DEV14_UART2_RX = 14,
+ DB5500_DMA_DEV15_UART3_RX = 15,
+ DB5500_DMA_DEV16_USB_OTG_IEP_8 = 16,
+ DB5500_DMA_DEV17_USB_OTG_IEP_1_9 = 17,
+ DB5500_DMA_DEV18_USB_OTG_IEP_2_10 = 18,
+ DB5500_DMA_DEV19_USB_OTG_IEP_3_11 = 19,
+ DB5500_DMA_DEV20_USB_OTG_IEP_4_12 = 20,
+ DB5500_DMA_DEV21_USB_OTG_IEP_5_13 = 21,
+ DB5500_DMA_DEV22_USB_OTG_IEP_6_14 = 22,
+ DB5500_DMA_DEV23_USB_OTG_IEP_7_15 = 23,
+ DB5500_DMA_DEV24_SDMMC0_RX = 24,
+ DB5500_DMA_DEV25_SDMMC1_RX = 25,
+ DB5500_DMA_DEV26_SDMMC2_RX = 26,
+ DB5500_DMA_DEV27_SDMMC3_RX = 27,
+ DB5500_DMA_DEV28_SDMMC4_RX = 28,
+ /* 29 - 32 not used */
+ DB5500_DMA_DEV33_SDMMC0_RX = 33,
+ DB5500_DMA_DEV34_SDMMC1_RX = 34,
+ DB5500_DMA_DEV35_SDMMC2_RX = 35,
+ DB5500_DMA_DEV36_SDMMC3_RX = 36,
+ DB5500_DMA_DEV37_SDMMC4_RX = 37,
+ DB5500_DMA_DEV38_USB_OTG_IEP_8 = 38,
+ DB5500_DMA_DEV39_USB_OTG_IEP_1_9 = 39,
+ DB5500_DMA_DEV40_USB_OTG_IEP_2_10 = 40,
+ DB5500_DMA_DEV41_USB_OTG_IEP_3_11 = 41,
+ DB5500_DMA_DEV42_USB_OTG_IEP_4_12 = 42,
+ DB5500_DMA_DEV43_USB_OTG_IEP_5_13 = 43,
+ DB5500_DMA_DEV44_USB_OTG_IEP_6_14 = 44,
+ DB5500_DMA_DEV45_USB_OTG_IEP_7_15 = 45,
+ /* 46 not used */
+ DB5500_DMA_DEV47_MCDE_RX = 47,
+ DB5500_DMA_DEV48_CRYPTO1_RX = 48,
+ /* 49, 50 not used */
+ DB5500_DMA_DEV49_I2C1_RX = 51,
+ DB5500_DMA_DEV50_I2C3_RX = 52,
+ DB5500_DMA_DEV51_I2C2_RX = 53,
+ /* 54 - 60 not used */
+ DB5500_DMA_DEV61_CRYPTO0_RX = 61,
+ /* 62, 63 not used */
+};
+
+enum dma_dest_dev_type {
+ DB5500_DMA_DEV0_SPI0_TX = 0,
+ DB5500_DMA_DEV1_SPI1_TX = 1,
+ DB5500_DMA_DEV2_SPI2_TX = 2,
+ DB5500_DMA_DEV3_SPI3_TX = 3,
+ DB5500_DMA_DEV4_USB_OTG_OEP_1_9 = 4,
+ DB5500_DMA_DEV5_USB_OTG_OEP_2_10 = 5,
+ DB5500_DMA_DEV6_USB_OTG_OEP_3_11 = 6,
+ DB5500_DMA_DEV7_IRRC_TX = 7,
+ DB5500_DMA_DEV8_IRDA_FIFO_TX = 8,
+ DB5500_DMA_DEV9_MSP0_TX = 9,
+ DB5500_DMA_DEV10_MSP1_TX = 10,
+ DB5500_DMA_DEV11_MSP2_TX = 11,
+ DB5500_DMA_DEV12_UART0_TX = 12,
+ DB5500_DMA_DEV13_UART1_TX = 13,
+ DB5500_DMA_DEV14_UART2_TX = 14,
+ DB5500_DMA_DEV15_UART3_TX = 15,
+ DB5500_DMA_DEV16_USB_OTG_OEP_8 = 16,
+ DB5500_DMA_DEV17_USB_OTG_OEP_1_9 = 17,
+ DB5500_DMA_DEV18_USB_OTG_OEP_2_10 = 18,
+ DB5500_DMA_DEV19_USB_OTG_OEP_3_11 = 19,
+ DB5500_DMA_DEV20_USB_OTG_OEP_4_12 = 20,
+ DB5500_DMA_DEV21_USB_OTG_OEP_5_13 = 21,
+ DB5500_DMA_DEV22_USB_OTG_OEP_6_14 = 22,
+ DB5500_DMA_DEV23_USB_OTG_OEP_7_15 = 23,
+ DB5500_DMA_DEV24_SDMMC0_TX = 24,
+ DB5500_DMA_DEV25_SDMMC1_TX = 25,
+ DB5500_DMA_DEV26_SDMMC2_TX = 26,
+ DB5500_DMA_DEV27_SDMMC3_TX = 27,
+ DB5500_DMA_DEV28_SDMMC4_TX = 28,
+ /* 29 - 31 not used */
+ DB5500_DMA_DEV32_FSMC_TX = 32,
+ DB5500_DMA_DEV33_SDMMC0_TX = 33,
+ DB5500_DMA_DEV34_SDMMC1_TX = 34,
+ DB5500_DMA_DEV35_SDMMC2_TX = 35,
+ DB5500_DMA_DEV36_SDMMC3_TX = 36,
+ DB5500_DMA_DEV37_SDMMC4_TX = 37,
+ DB5500_DMA_DEV38_USB_OTG_OEP_8 = 38,
+ DB5500_DMA_DEV39_USB_OTG_OEP_1_9 = 39,
+ DB5500_DMA_DEV40_USB_OTG_OEP_2_10 = 40,
+ DB5500_DMA_DEV41_USB_OTG_OEP_3_11 = 41,
+ DB5500_DMA_DEV42_USB_OTG_OEP_4_12 = 42,
+ DB5500_DMA_DEV43_USB_OTG_OEP_5_13 = 43,
+ DB5500_DMA_DEV44_USB_OTG_OEP_6_14 = 44,
+ DB5500_DMA_DEV45_USB_OTG_OEP_7_15 = 45,
+ /* 46 not used */
+ DB5500_DMA_DEV47_STM_TX = 47,
+ DB5500_DMA_DEV48_CRYPTO1_TX = 48,
+ DB5500_DMA_DEV49_CRYPTO1_TX_HASH1_TX = 49,
+ DB5500_DMA_DEV50_HASH1_TX = 50,
+ DB5500_DMA_DEV51_I2C1_TX = 51,
+ DB5500_DMA_DEV52_I2C3_TX = 52,
+ DB5500_DMA_DEV53_I2C2_TX = 53,
+ /* 54, 55 not used */
+ DB5500_DMA_MEMCPY_TX_1 = 56,
+ DB5500_DMA_MEMCPY_TX_2 = 57,
+ DB5500_DMA_MEMCPY_TX_3 = 58,
+ DB5500_DMA_MEMCPY_TX_4 = 59,
+ DB5500_DMA_MEMCPY_TX_5 = 60,
+ DB5500_DMA_DEV61_CRYPTO0_TX = 61,
+ DB5500_DMA_DEV62_CRYPTO0_TX_HASH0_TX = 62,
+ DB5500_DMA_DEV63_HASH0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h
new file mode 100644
index 00000000000..a616419bea7
--- /dev/null
+++ b/arch/arm/mach-ux500/ste-dma40-db8500.h
@@ -0,0 +1,144 @@
+/*
+ * arch/arm/mach-ux500/ste_dma40_db8500.h
+ * DB8500-SoC-specific configuration for DMA40
+ *
+ * Copyright (C) ST-Ericsson 2007-2010
+ * License terms: GNU General Public License (GPL) version 2
+ * Author: Per Friden <per.friden@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ */
+#ifndef STE_DMA40_DB8500_H
+#define STE_DMA40_DB8500_H
+
+#define DB8500_DMA_NR_DEV 64
+
+enum dma_src_dev_type {
+ DB8500_DMA_DEV0_SPI0_RX = 0,
+ DB8500_DMA_DEV1_SD_MMC0_RX = 1,
+ DB8500_DMA_DEV2_SD_MMC1_RX = 2,
+ DB8500_DMA_DEV3_SD_MMC2_RX = 3,
+ DB8500_DMA_DEV4_I2C1_RX = 4,
+ DB8500_DMA_DEV5_I2C3_RX = 5,
+ DB8500_DMA_DEV6_I2C2_RX = 6,
+ DB8500_DMA_DEV7_I2C4_RX = 7, /* Only on V1 and later */
+ DB8500_DMA_DEV8_SSP0_RX = 8,
+ DB8500_DMA_DEV9_SSP1_RX = 9,
+ DB8500_DMA_DEV10_MCDE_RX = 10,
+ DB8500_DMA_DEV11_UART2_RX = 11,
+ DB8500_DMA_DEV12_UART1_RX = 12,
+ DB8500_DMA_DEV13_UART0_RX = 13,
+ DB8500_DMA_DEV14_MSP2_RX = 14,
+ DB8500_DMA_DEV15_I2C0_RX = 15,
+ DB8500_DMA_DEV16_USB_OTG_IEP_7_15 = 16,
+ DB8500_DMA_DEV17_USB_OTG_IEP_6_14 = 17,
+ DB8500_DMA_DEV18_USB_OTG_IEP_5_13 = 18,
+ DB8500_DMA_DEV19_USB_OTG_IEP_4_12 = 19,
+ DB8500_DMA_DEV20_SLIM0_CH0_RX_HSI_RX_CH0 = 20,
+ DB8500_DMA_DEV21_SLIM0_CH1_RX_HSI_RX_CH1 = 21,
+ DB8500_DMA_DEV22_SLIM0_CH2_RX_HSI_RX_CH2 = 22,
+ DB8500_DMA_DEV23_SLIM0_CH3_RX_HSI_RX_CH3 = 23,
+ DB8500_DMA_DEV24_SRC_SXA0_RX_TX = 24,
+ DB8500_DMA_DEV25_SRC_SXA1_RX_TX = 25,
+ DB8500_DMA_DEV26_SRC_SXA2_RX_TX = 26,
+ DB8500_DMA_DEV27_SRC_SXA3_RX_TX = 27,
+ DB8500_DMA_DEV28_SD_MM2_RX = 28,
+ DB8500_DMA_DEV29_SD_MM0_RX = 29,
+ DB8500_DMA_DEV30_MSP1_RX = 30,
+ /* On DB8500v2, MSP3 RX replaces MSP1 RX */
+ DB8500_DMA_DEV30_MSP3_RX = 30,
+ DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX = 31,
+ DB8500_DMA_DEV32_SD_MM1_RX = 32,
+ DB8500_DMA_DEV33_SPI2_RX = 33,
+ DB8500_DMA_DEV34_I2C3_RX2 = 34,
+ DB8500_DMA_DEV35_SPI1_RX = 35,
+ DB8500_DMA_DEV36_USB_OTG_IEP_3_11 = 36,
+ DB8500_DMA_DEV37_USB_OTG_IEP_2_10 = 37,
+ DB8500_DMA_DEV38_USB_OTG_IEP_1_9 = 38,
+ DB8500_DMA_DEV39_USB_OTG_IEP_8 = 39,
+ DB8500_DMA_DEV40_SPI3_RX = 40,
+ DB8500_DMA_DEV41_SD_MM3_RX = 41,
+ DB8500_DMA_DEV42_SD_MM4_RX = 42,
+ DB8500_DMA_DEV43_SD_MM5_RX = 43,
+ DB8500_DMA_DEV44_SRC_SXA4_RX_TX = 44,
+ DB8500_DMA_DEV45_SRC_SXA5_RX_TX = 45,
+ DB8500_DMA_DEV46_SLIM0_CH8_RX_SRC_SXA6_RX_TX = 46,
+ DB8500_DMA_DEV47_SLIM0_CH9_RX_SRC_SXA7_RX_TX = 47,
+ DB8500_DMA_DEV48_CAC1_RX = 48,
+ /* 49, 50 and 51 are not used */
+ DB8500_DMA_DEV52_SLIM0_CH4_RX_HSI_RX_CH4 = 52,
+ DB8500_DMA_DEV53_SLIM0_CH5_RX_HSI_RX_CH5 = 53,
+ DB8500_DMA_DEV54_SLIM0_CH6_RX_HSI_RX_CH6 = 54,
+ DB8500_DMA_DEV55_SLIM0_CH7_RX_HSI_RX_CH7 = 55,
+ /* 56, 57, 58, 59 and 60 are not used */
+ DB8500_DMA_DEV61_CAC0_RX = 61,
+ /* 62 and 63 are not used */
+};
+
+enum dma_dest_dev_type {
+ DB8500_DMA_DEV0_SPI0_TX = 0,
+ DB8500_DMA_DEV1_SD_MMC0_TX = 1,
+ DB8500_DMA_DEV2_SD_MMC1_TX = 2,
+ DB8500_DMA_DEV3_SD_MMC2_TX = 3,
+ DB8500_DMA_DEV4_I2C1_TX = 4,
+ DB8500_DMA_DEV5_I2C3_TX = 5,
+ DB8500_DMA_DEV6_I2C2_TX = 6,
+ DB8500_DMA_DEV7_I2C4_TX = 7, /* Only on V1 and later */
+ DB8500_DMA_DEV8_SSP0_TX = 8,
+ DB8500_DMA_DEV9_SSP1_TX = 9,
+ /* 10 is not used*/
+ DB8500_DMA_DEV11_UART2_TX = 11,
+ DB8500_DMA_DEV12_UART1_TX = 12,
+ DB8500_DMA_DEV13_UART0_TX = 13,
+ DB8500_DMA_DEV14_MSP2_TX = 14,
+ DB8500_DMA_DEV15_I2C0_TX = 15,
+ DB8500_DMA_DEV16_USB_OTG_OEP_7_15 = 16,
+ DB8500_DMA_DEV17_USB_OTG_OEP_6_14 = 17,
+ DB8500_DMA_DEV18_USB_OTG_OEP_5_13 = 18,
+ DB8500_DMA_DEV19_USB_OTG_OEP_4_12 = 19,
+ DB8500_DMA_DEV20_SLIM0_CH0_TX_HSI_TX_CH0 = 20,
+ DB8500_DMA_DEV21_SLIM0_CH1_TX_HSI_TX_CH1 = 21,
+ DB8500_DMA_DEV22_SLIM0_CH2_TX_HSI_TX_CH2 = 22,
+ DB8500_DMA_DEV23_SLIM0_CH3_TX_HSI_TX_CH3 = 23,
+ DB8500_DMA_DEV24_DST_SXA0_RX_TX = 24,
+ DB8500_DMA_DEV25_DST_SXA1_RX_TX = 25,
+ DB8500_DMA_DEV26_DST_SXA2_RX_TX = 26,
+ DB8500_DMA_DEV27_DST_SXA3_RX_TX = 27,
+ DB8500_DMA_DEV28_SD_MM2_TX = 28,
+ DB8500_DMA_DEV29_SD_MM0_TX = 29,
+ DB8500_DMA_DEV30_MSP1_TX = 30,
+ DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX = 31,
+ DB8500_DMA_DEV32_SD_MM1_TX = 32,
+ DB8500_DMA_DEV33_SPI2_TX = 33,
+ DB8500_DMA_DEV34_I2C3_TX2 = 34,
+ DB8500_DMA_DEV35_SPI1_TX = 35,
+ DB8500_DMA_DEV36_USB_OTG_OEP_3_11 = 36,
+ DB8500_DMA_DEV37_USB_OTG_OEP_2_10 = 37,
+ DB8500_DMA_DEV38_USB_OTG_OEP_1_9 = 38,
+ DB8500_DMA_DEV39_USB_OTG_OEP_8 = 39,
+ DB8500_DMA_DEV40_SPI3_TX = 40,
+ DB8500_DMA_DEV41_SD_MM3_TX = 41,
+ DB8500_DMA_DEV42_SD_MM4_TX = 42,
+ DB8500_DMA_DEV43_SD_MM5_TX = 43,
+ DB8500_DMA_DEV44_DST_SXA4_RX_TX = 44,
+ DB8500_DMA_DEV45_DST_SXA5_RX_TX = 45,
+ DB8500_DMA_DEV46_SLIM0_CH8_TX_DST_SXA6_RX_TX = 46,
+ DB8500_DMA_DEV47_SLIM0_CH9_TX_DST_SXA7_RX_TX = 47,
+ DB8500_DMA_DEV48_CAC1_TX = 48,
+ DB8500_DMA_DEV49_CAC1_TX_HAC1_TX = 49,
+ DB8500_DMA_DEV50_HAC1_TX = 50,
+ DB8500_DMA_MEMCPY_TX_0 = 51,
+ DB8500_DMA_DEV52_SLIM1_CH4_TX_HSI_TX_CH4 = 52,
+ DB8500_DMA_DEV53_SLIM1_CH5_TX_HSI_TX_CH5 = 53,
+ DB8500_DMA_DEV54_SLIM1_CH6_TX_HSI_TX_CH6 = 54,
+ DB8500_DMA_DEV55_SLIM1_CH7_TX_HSI_TX_CH7 = 55,
+ DB8500_DMA_MEMCPY_TX_1 = 56,
+ DB8500_DMA_MEMCPY_TX_2 = 57,
+ DB8500_DMA_MEMCPY_TX_3 = 58,
+ DB8500_DMA_MEMCPY_TX_4 = 59,
+ DB8500_DMA_MEMCPY_TX_5 = 60,
+ DB8500_DMA_DEV61_CAC0_TX = 61,
+ DB8500_DMA_DEV62_CAC0_TX_HAC0_TX = 62,
+ DB8500_DMA_DEV63_HAC0_TX = 63,
+};
+
+#endif
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
new file mode 100644
index 00000000000..aea467d04ff
--- /dev/null
+++ b/arch/arm/mach-ux500/timer.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Mattias Wallin <mattias.wallin@stericsson.com> for ST-Ericsson
+ */
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/clksrc-dbx500-prcmu.h>
+
+#include <asm/localtimer.h>
+
+#include <plat/mtu.h>
+
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+static void __init ux500_timer_init(void)
+{
+ void __iomem *prcmu_timer_base;
+
+ if (cpu_is_u5500()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = __io_address(U5500_TWD_BASE);
+#endif
+ mtu_base = __io_address(U5500_MTU0_BASE);
+ prcmu_timer_base = __io_address(U5500_PRCMU_TIMER_3_BASE);
+ } else if (cpu_is_u8500()) {
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = __io_address(U8500_TWD_BASE);
+#endif
+ mtu_base = __io_address(U8500_MTU0_BASE);
+ prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE);
+ } else {
+ ux500_unknown_soc();
+ }
+
+ /*
+ * Here we register the timerblocks active in the system.
+ * Localtimers (twd) is started when both cpu is up and running.
+ * MTU register a clocksource, clockevent and sched_clock.
+ * Since the MTU is located in the VAPE power domain
+ * it will be cleared in sleep which makes it unsuitable.
+ * We however need it as a timer tick (clockevent)
+ * during boot to calibrate delay until twd is started.
+ * RTC-RTT have problems as timer tick during boot since it is
+ * depending on delay which is not yet calibrated. RTC-RTT is in the
+ * always-on powerdomain and is used as clockevent instead of twd when
+ * sleeping.
+ * The PRCMU timer 4(3 for DB5500) register a clocksource and
+ * sched_clock with higher rating then MTU since is always-on.
+ *
+ */
+
+ nmdk_timer_init();
+ clksrc_dbx500_prcmu_init(prcmu_timer_base);
+}
+
+static void ux500_timer_reset(void)
+{
+ nmdk_clkevt_reset();
+ nmdk_clksrc_reset();
+}
+
+struct sys_timer ux500_timer = {
+ .init = ux500_timer_init,
+ .resume = ux500_timer_reset,
+};
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
new file mode 100644
index 00000000000..9f9e1c20306
--- /dev/null
+++ b/arch/arm/mach-ux500/usb.c
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+#include <linux/dma-mapping.h>
+#include <plat/ste_dma40.h>
+#include <mach/hardware.h>
+#include <mach/usb.h>
+
+#define MUSB_DMA40_RX_CH { \
+ .mode = STEDMA40_MODE_LOGICAL, \
+ .dir = STEDMA40_PERIPH_TO_MEM, \
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY, \
+ .src_info.data_width = STEDMA40_WORD_WIDTH, \
+ .dst_info.data_width = STEDMA40_WORD_WIDTH, \
+ .src_info.psize = STEDMA40_PSIZE_LOG_16, \
+ .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+ }
+
+#define MUSB_DMA40_TX_CH { \
+ .mode = STEDMA40_MODE_LOGICAL, \
+ .dir = STEDMA40_MEM_TO_PERIPH, \
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY, \
+ .src_info.data_width = STEDMA40_WORD_WIDTH, \
+ .dst_info.data_width = STEDMA40_WORD_WIDTH, \
+ .src_info.psize = STEDMA40_PSIZE_LOG_16, \
+ .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
+ }
+
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+ = {
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH,
+ MUSB_DMA40_RX_CH
+};
+
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+ = {
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+ MUSB_DMA40_TX_CH,
+};
+
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+ &musb_dma_rx_ch[0],
+ &musb_dma_rx_ch[1],
+ &musb_dma_rx_ch[2],
+ &musb_dma_rx_ch[3],
+ &musb_dma_rx_ch[4],
+ &musb_dma_rx_ch[5],
+ &musb_dma_rx_ch[6],
+ &musb_dma_rx_ch[7]
+};
+
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+ &musb_dma_tx_ch[0],
+ &musb_dma_tx_ch[1],
+ &musb_dma_tx_ch[2],
+ &musb_dma_tx_ch[3],
+ &musb_dma_tx_ch[4],
+ &musb_dma_tx_ch[5],
+ &musb_dma_tx_ch[6],
+ &musb_dma_tx_ch[7]
+};
+
+static struct ux500_musb_board_data musb_board_data = {
+ .dma_rx_param_array = ux500_dma_rx_param_array,
+ .dma_tx_param_array = ux500_dma_tx_param_array,
+ .num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
+ .num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
+ .dma_filter = stedma40_filter,
+};
+
+static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
+
+static struct musb_hdrc_config musb_hdrc_config = {
+ .multipoint = true,
+ .dyn_fifo = true,
+ .num_eps = 16,
+ .ram_bits = 16,
+};
+
+static struct musb_hdrc_platform_data musb_platform_data = {
+ .mode = MUSB_OTG,
+ .config = &musb_hdrc_config,
+ .board_data = &musb_board_data,
+};
+
+static struct resource usb_resources[] = {
+ [0] = {
+ .name = "usb-mem",
+ .flags = IORESOURCE_MEM,
+ },
+
+ [1] = {
+ .name = "mc", /* hard-coded in musb */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ux500_musb_device = {
+ .name = "musb-ux500",
+ .id = 0,
+ .dev = {
+ .platform_data = &musb_platform_data,
+ .dma_mask = &ux500_musb_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(usb_resources),
+ .resource = usb_resources,
+};
+
+static inline void ux500_usb_dma_update_rx_ch_config(int *src_dev_type)
+{
+ u32 idx;
+
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
+ musb_dma_rx_ch[idx].src_dev_type = src_dev_type[idx];
+}
+
+static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
+{
+ u32 idx;
+
+ for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
+ musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
+}
+
+void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
+ int *dma_tx_cfg)
+{
+ ux500_musb_device.resource[0].start = base;
+ ux500_musb_device.resource[0].end = base + SZ_64K - 1;
+ ux500_musb_device.resource[1].start = irq;
+ ux500_musb_device.resource[1].end = irq;
+
+ ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
+ ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
+
+ platform_device_register(&ux500_musb_device);
+}