summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500/board-mop500.c
diff options
context:
space:
mode:
authorAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
committerAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
commitb4b6116a13633898cf868f2f103c96a90c4c20f8 (patch)
tree93d1b7e2cfcdf473d8d4ff3ad141fa864f8491f6 /arch/arm/mach-ux500/board-mop500.c
parentedd4be777c953e5faafc80d091d3084b4343f5d3 (diff)
downloadkernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.gz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.xz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.zip
fedora kernel: d9aad82f3319f3cfd1aebc01234254ef0c37ad84v3.3.2-1
Signed-off-by: Anton Arapov <anton@redhat.com>
Diffstat (limited to 'arch/arm/mach-ux500/board-mop500.c')
-rw-r--r--arch/arm/mach-ux500/board-mop500.c720
1 files changed, 720 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 00000000000..5c00712907d
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,720 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/amba/serial.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/regulator/ab8500.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/mfd/tps6105x.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
+#include <linux/leds-lp5521.h>
+#include <linux/input.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio_keys.h>
+#include <linux/delay.h>
+
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+
+#include <plat/i2c.h>
+#include <plat/ste_dma40.h>
+#include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+#include <mach/devices.h>
+#include <mach/irqs.h>
+
+#include "pins-db8500.h"
+#include "ste-dma40-db8500.h"
+#include "devices-db8500.h"
+#include "board-mop500.h"
+#include "board-mop500-regulators.h"
+
+static struct gpio_led snowball_led_array[] = {
+ {
+ .name = "user_led",
+ .default_trigger = "none",
+ .gpio = 142,
+ },
+};
+
+static struct gpio_led_platform_data snowball_led_data = {
+ .leds = snowball_led_array,
+ .num_leds = ARRAY_SIZE(snowball_led_array),
+};
+
+static struct platform_device snowball_led_dev = {
+ .name = "leds-gpio",
+ .dev = {
+ .platform_data = &snowball_led_data,
+ },
+};
+
+static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
+ .gpio_base = MOP500_AB8500_GPIO(0),
+ .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE,
+ /* config_reg is the initial configuration of ab8500 pins.
+ * The pins can be configured as GPIO or alt functions based
+ * on value present in GpioSel1 to GpioSel6 and AlternatFunction
+ * register. This is the array of 7 configuration settings.
+ * One has to compile time decide these settings. Below is the
+ * explanation of these setting
+ * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
+ * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
+ * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
+ * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO
+ * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO
+ * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO
+ * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured
+ * as GPIO then this register selectes the alternate fucntions
+ */
+ .config_reg = {0x00, 0x1E, 0x80, 0x01,
+ 0x7A, 0x00, 0x00},
+};
+
+static struct gpio_keys_button snowball_key_array[] = {
+ {
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_1,
+ .desc = "userpb",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 151,
+ .type = EV_KEY,
+ .code = KEY_2,
+ .desc = "extkb1",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 152,
+ .type = EV_KEY,
+ .code = KEY_3,
+ .desc = "extkb2",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 161,
+ .type = EV_KEY,
+ .code = KEY_4,
+ .desc = "extkb3",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+ {
+ .gpio = 162,
+ .type = EV_KEY,
+ .code = KEY_5,
+ .desc = "extkb4",
+ .active_low = 1,
+ .debounce_interval = 50,
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data snowball_key_data = {
+ .buttons = snowball_key_array,
+ .nbuttons = ARRAY_SIZE(snowball_key_array),
+};
+
+static struct platform_device snowball_key_dev = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &snowball_key_data,
+ }
+};
+
+static struct smsc911x_platform_config snowball_sbnet_cfg = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .shift = 1,
+};
+
+static struct resource sbnet_res[] = {
+ {
+ .name = "smsc911x-memory",
+ .start = (0x5000 << 16),
+ .end = (0x5000 << 16) + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NOMADIK_GPIO_TO_IRQ(140),
+ .end = NOMADIK_GPIO_TO_IRQ(140),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device snowball_sbnet_dev = {
+ .name = "smsc911x",
+ .num_resources = ARRAY_SIZE(sbnet_res),
+ .resource = sbnet_res,
+ .dev = {
+ .platform_data = &snowball_sbnet_cfg,
+ },
+};
+
+static struct ab8500_platform_data ab8500_platdata = {
+ .irq_base = MOP500_AB8500_IRQ_BASE,
+ .regulator_reg_init = ab8500_regulator_reg_init,
+ .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
+ .regulator = ab8500_regulators,
+ .num_regulator = ARRAY_SIZE(ab8500_regulators),
+ .gpio = &ab8500_gpio_pdata,
+};
+
+static struct resource ab8500_resources[] = {
+ [0] = {
+ .start = IRQ_DB8500_AB8500,
+ .end = IRQ_DB8500_AB8500,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+struct platform_device ab8500_device = {
+ .name = "ab8500-i2c",
+ .id = 0,
+ .dev = {
+ .platform_data = &ab8500_platdata,
+ },
+ .num_resources = 1,
+ .resource = ab8500_resources,
+};
+
+/*
+ * TPS61052
+ */
+
+static struct tps6105x_platform_data mop500_tps61052_data = {
+ .mode = TPS6105X_MODE_VOLTAGE,
+ .regulator_data = &tps61052_regulator,
+};
+
+/*
+ * TC35892
+ */
+
+static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
+{
+ mop500_sdi_tc35892_init();
+}
+
+static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
+ .gpio_base = MOP500_EGPIO(0),
+ .setup = mop500_tc35892_init,
+};
+
+static struct tc3589x_platform_data mop500_tc35892_data = {
+ .block = TC3589x_BLOCK_GPIO,
+ .gpio = &mop500_tc35892_gpio_data,
+ .irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct lp5521_led_config lp5521_pri_led[] = {
+ [0] = {
+ .chan_nr = 0,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [1] = {
+ .chan_nr = 1,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [2] = {
+ .chan_nr = 2,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+};
+
+static struct lp5521_platform_data __initdata lp5521_pri_data = {
+ .label = "lp5521_pri",
+ .led_config = &lp5521_pri_led[0],
+ .num_channels = 3,
+ .clock_mode = LP5521_CLOCK_EXT,
+};
+
+static struct lp5521_led_config lp5521_sec_led[] = {
+ [0] = {
+ .chan_nr = 0,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [1] = {
+ .chan_nr = 1,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+ [2] = {
+ .chan_nr = 2,
+ .led_current = 0x2f,
+ .max_current = 0x5f,
+ },
+};
+
+static struct lp5521_platform_data __initdata lp5521_sec_data = {
+ .label = "lp5521_sec",
+ .led_config = &lp5521_sec_led[0],
+ .num_channels = 3,
+ .clock_mode = LP5521_CLOCK_EXT,
+};
+
+static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("tc3589x", 0x42),
+ .irq = NOMADIK_GPIO_TO_IRQ(217),
+ .platform_data = &mop500_tc35892_data,
+ },
+ /* I2C0 devices only available prior to HREFv60 */
+ {
+ I2C_BOARD_INFO("tps61052", 0x33),
+ .platform_data = &mop500_tps61052_data,
+ },
+};
+
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
+static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
+ {
+ /* lp5521 LED driver, 1st device */
+ I2C_BOARD_INFO("lp5521", 0x33),
+ .platform_data = &lp5521_pri_data,
+ },
+ {
+ /* lp5521 LED driver, 2st device */
+ I2C_BOARD_INFO("lp5521", 0x34),
+ .platform_data = &lp5521_sec_data,
+ },
+ {
+ /* Light sensor Rohm BH1780GLI */
+ I2C_BOARD_INFO("bh1780", 0x29),
+ },
+};
+
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \
+static struct nmk_i2c_controller u8500_i2c##id##_data = { \
+ /* \
+ * slave data setup time, which is \
+ * 250 ns,100ns,10ns which is 14,6,2 \
+ * respectively for a 48 Mhz \
+ * i2c clock \
+ */ \
+ .slsu = _slsu, \
+ /* Tx FIFO threshold */ \
+ .tft = _tft, \
+ /* Rx FIFO threshold */ \
+ .rft = _rft, \
+ /* std. mode operation */ \
+ .clk_freq = clk, \
+ /* Slave response timeout(ms) */\
+ .timeout = t_out, \
+ .sm = _sm, \
+}
+
+/*
+ * The board uses 4 i2c controllers, initialize all of
+ * them with slave data setup time of 250 ns,
+ * Tx & Rx FIFO threshold values as 8 and standard
+ * mode of operation
+ */
+U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+
+static void __init mop500_i2c_init(void)
+{
+ db8500_add_i2c0(&u8500_i2c0_data);
+ db8500_add_i2c1(&u8500_i2c1_data);
+ db8500_add_i2c2(&u8500_i2c2_data);
+ db8500_add_i2c3(&u8500_i2c3_data);
+}
+
+static struct gpio_keys_button mop500_gpio_keys[] = {
+ {
+ .desc = "SFH7741 Proximity Sensor",
+ .type = EV_SW,
+ .code = SW_FRONT_PROXIMITY,
+ .active_low = 0,
+ .can_disable = 1,
+ }
+};
+
+static struct regulator *prox_regulator;
+static int mop500_prox_activate(struct device *dev);
+static void mop500_prox_deactivate(struct device *dev);
+
+static struct gpio_keys_platform_data mop500_gpio_keys_data = {
+ .buttons = mop500_gpio_keys,
+ .nbuttons = ARRAY_SIZE(mop500_gpio_keys),
+ .enable = mop500_prox_activate,
+ .disable = mop500_prox_deactivate,
+};
+
+static struct platform_device mop500_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = 0,
+ .dev = {
+ .platform_data = &mop500_gpio_keys_data,
+ },
+};
+
+static int mop500_prox_activate(struct device *dev)
+{
+ prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
+ "vcc");
+ if (IS_ERR(prox_regulator)) {
+ dev_err(&mop500_gpio_keys_device.dev,
+ "no regulator\n");
+ return PTR_ERR(prox_regulator);
+ }
+ regulator_enable(prox_regulator);
+ return 0;
+}
+
+static void mop500_prox_deactivate(struct device *dev)
+{
+ regulator_disable(prox_regulator);
+ regulator_put(prox_regulator);
+}
+
+/* add any platform devices here - TODO */
+static struct platform_device *mop500_platform_devs[] __initdata = {
+ &mop500_gpio_keys_device,
+ &ab8500_device,
+};
+
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV8_SSP0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV8_SSP0_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+#endif
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+ .bus_id = 0,
+#ifdef CONFIG_STE_DMA40
+ .enable_dma = 1,
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &ssp0_dma_cfg_rx,
+ .dma_tx_param = &ssp0_dma_cfg_tx,
+#else
+ .enable_dma = 0,
+#endif
+ /* on this platform, gpio 31,142,144,214 &
+ * 224 are connected as chip selects
+ */
+ .num_chipselect = 5,
+};
+
+static void __init mop500_spi_init(void)
+{
+ db8500_add_ssp0(&ssp0_platform_data);
+}
+
+#ifdef CONFIG_STE_DMA40
+static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV13_UART0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV13_UART0_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV12_UART1_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV12_UART1_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+ .src_dev_type = DB8500_DMA_DEV11_UART2_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+
+static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
+ .mode = STEDMA40_MODE_LOGICAL,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+ .src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV11_UART2_TX,
+ .src_info.data_width = STEDMA40_BYTE_WIDTH,
+ .dst_info.data_width = STEDMA40_BYTE_WIDTH,
+};
+#endif
+
+
+static pin_cfg_t mop500_pins_uart0[] = {
+ GPIO0_U0_CTSn | PIN_INPUT_PULLUP,
+ GPIO1_U0_RTSn | PIN_OUTPUT_HIGH,
+ GPIO2_U0_RXD | PIN_INPUT_PULLUP,
+ GPIO3_U0_TXD | PIN_OUTPUT_HIGH,
+};
+
+#define PRCC_K_SOFTRST_SET 0x18
+#define PRCC_K_SOFTRST_CLEAR 0x1C
+static void ux500_uart0_reset(void)
+{
+ void __iomem *prcc_rst_set, *prcc_rst_clr;
+
+ prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+ PRCC_K_SOFTRST_SET);
+ prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
+ PRCC_K_SOFTRST_CLEAR);
+
+ /* Activate soft reset PRCC_K_SOFTRST_CLEAR */
+ writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
+ udelay(1);
+
+ /* Release soft reset PRCC_K_SOFTRST_SET */
+ writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
+ udelay(1);
+}
+
+static void ux500_uart0_init(void)
+{
+ int ret;
+
+ ret = nmk_config_pins(mop500_pins_uart0,
+ ARRAY_SIZE(mop500_pins_uart0));
+ if (ret < 0)
+ pr_err("pl011: uart pins_enable failed\n");
+}
+
+static void ux500_uart0_exit(void)
+{
+ int ret;
+
+ ret = nmk_config_pins_sleep(mop500_pins_uart0,
+ ARRAY_SIZE(mop500_pins_uart0));
+ if (ret < 0)
+ pr_err("pl011: uart pins_disable failed\n");
+}
+
+static struct amba_pl011_data uart0_plat = {
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &uart0_dma_cfg_rx,
+ .dma_tx_param = &uart0_dma_cfg_tx,
+#endif
+ .init = ux500_uart0_init,
+ .exit = ux500_uart0_exit,
+ .reset = ux500_uart0_reset,
+};
+
+static struct amba_pl011_data uart1_plat = {
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &uart1_dma_cfg_rx,
+ .dma_tx_param = &uart1_dma_cfg_tx,
+#endif
+};
+
+static struct amba_pl011_data uart2_plat = {
+#ifdef CONFIG_STE_DMA40
+ .dma_filter = stedma40_filter,
+ .dma_rx_param = &uart2_dma_cfg_rx,
+ .dma_tx_param = &uart2_dma_cfg_tx,
+#endif
+};
+
+static void __init mop500_uart_init(void)
+{
+ db8500_add_uart0(&uart0_plat);
+ db8500_add_uart1(&uart1_plat);
+ db8500_add_uart2(&uart2_plat);
+}
+
+static struct platform_device *snowball_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+ &snowball_sbnet_dev,
+ &ab8500_device,
+};
+
+static void __init mop500_init_machine(void)
+{
+ int i2c0_devs;
+
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+
+ u8500_init_devices();
+
+ mop500_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ mop500_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init snowball_init_machine(void)
+{
+ int i2c0_devs;
+
+ u8500_init_devices();
+
+ snowball_pins_init();
+
+ platform_add_devices(snowball_platform_devs,
+ ARRAY_SIZE(snowball_platform_devs));
+
+ mop500_i2c_init();
+ snowball_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+static void __init hrefv60_init_machine(void)
+{
+ int i2c0_devs;
+
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+
+ u8500_init_devices();
+
+ hrefv60_pins_init();
+
+ platform_add_devices(mop500_platform_devs,
+ ARRAY_SIZE(mop500_platform_devs));
+
+ mop500_i2c_init();
+ hrefv60_sdi_init();
+ mop500_spi_init();
+ mop500_uart_init();
+
+ i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+ i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+ i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+ i2c_register_board_info(2, mop500_i2c2_devices,
+ ARRAY_SIZE(mop500_i2c2_devices));
+
+ /* This board has full regulator constraints */
+ regulator_has_full_constraints();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+ /* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = mop500_init_machine,
+MACHINE_END
+
+MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = hrefv60_init_machine,
+MACHINE_END
+
+MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
+ .atag_offset = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ /* we re-use nomadik timer here */
+ .timer = &ux500_timer,
+ .handle_irq = gic_handle_irq,
+ .init_machine = snowball_init_machine,
+MACHINE_END