summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s5p64x0
diff options
context:
space:
mode:
authorAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
committerAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
commitb4b6116a13633898cf868f2f103c96a90c4c20f8 (patch)
tree93d1b7e2cfcdf473d8d4ff3ad141fa864f8491f6 /arch/arm/mach-s5p64x0
parentedd4be777c953e5faafc80d091d3084b4343f5d3 (diff)
downloadkernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.gz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.xz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.zip
fedora kernel: d9aad82f3319f3cfd1aebc01234254ef0c37ad84v3.3.2-1
Signed-off-by: Anton Arapov <anton@redhat.com>
Diffstat (limited to 'arch/arm/mach-s5p64x0')
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig102
-rw-r--r--arch/arm/mach-s5p64x0/Makefile36
-rw-r--r--arch/arm/mach-s5p64x0/Makefile.boot2
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6440.c617
-rw-r--r--arch/arm/mach-s5p64x0/clock-s5p6450.c680
-rw-r--r--arch/arm/mach-s5p64x0/clock.c235
-rw-r--r--arch/arm/mach-s5p64x0/common.c447
-rw-r--r--arch/arm/mach-s5p64x0/common.h57
-rw-r--r--arch/arm/mach-s5p64x0/dev-audio.c236
-rw-r--r--arch/arm/mach-s5p64x0/dma.c142
-rw-r--r--arch/arm/mach-s5p64x0/gpiolib.c508
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/debug-macro.S33
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/dma.h26
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/entry-macro.S17
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/gpio.h132
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/hardware.h18
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/i2c.h17
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/io.h25
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/irqs.h150
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/map.h95
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/pm-core.h117
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-clock.h98
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-gpio.h68
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/regs-irq.h19
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h46
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/spi-clocks.h20
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/system.h21
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/tick.h29
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/timex.h27
-rw-r--r--arch/arm/mach-s5p64x0/include/mach/uncompress.h212
-rw-r--r--arch/arm/mach-s5p64x0/irq-pm.c92
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6440.c277
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6450.c296
-rw-r--r--arch/arm/mach-s5p64x0/pm.c206
-rw-r--r--arch/arm/mach-s5p64x0/setup-fb-24bpp.c29
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c0.c38
-rw-r--r--arch/arm/mach-s5p64x0/setup-i2c1.c38
-rw-r--r--arch/arm/mach-s5p64x0/setup-sdhci-gpio.c104
-rw-r--r--arch/arm/mach-s5p64x0/setup-spi.c55
39 files changed, 5367 insertions, 0 deletions
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
new file mode 100644
index 00000000000..c87f6108eeb
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -0,0 +1,102 @@
+# arch/arm/mach-s5p64x0/Kconfig
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+if ARCH_S5P64X0
+
+config CPU_S5P6440
+ bool
+ select SAMSUNG_DMADEV
+ select S5P_HRT
+ select S5P_SLEEP if PM
+ select SAMSUNG_WAKEMASK if PM
+ help
+ Enable S5P6440 CPU support
+
+config CPU_S5P6450
+ bool
+ select SAMSUNG_DMADEV
+ select S5P_HRT
+ select S5P_SLEEP if PM
+ select SAMSUNG_WAKEMASK if PM
+ help
+ Enable S5P6450 CPU support
+
+config S5P64X0_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S5P64X0 based boards with a LCD display
+ through RGB interface.
+
+config S5P64X0_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S5P64X0_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
+config S5P64X0_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
+# machine support
+
+config MACH_SMDK6440
+ bool "SMDK6440"
+ select CPU_S5P6440
+ select S3C_DEV_FB
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
+ select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
+ help
+ Machine support for the Samsung SMDK6440
+
+config MACH_SMDK6450
+ bool "SMDK6450"
+ select CPU_S5P6450
+ select S3C_DEV_FB
+ select S3C_DEV_I2C1
+ select S3C_DEV_RTC
+ select S3C_DEV_WDT
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
+ select SAMSUNG_DEV_ADC
+ select SAMSUNG_DEV_BACKLIGHT
+ select SAMSUNG_DEV_PWM
+ select SAMSUNG_DEV_TS
+ select S5P64X0_SETUP_FB_24BPP
+ select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
+ help
+ Machine support for the Samsung SMDK6450
+
+menu "Use 8-bit SDHCI bus width"
+
+config S5P64X0_SD_CH1_8BIT
+ bool "SDHCI Channel 1 (Slot 1)"
+ depends on MACH_SMDK6450 || MACH_SMDK6440
+ help
+ Support SDHCI Channel 1 8-bit bus.
+ If selected, Channel 2 is disabled.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
new file mode 100644
index 00000000000..12bb951187a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -0,0 +1,36 @@
+# arch/arm/mach-s5p64x0/Makefile
+#
+# Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core
+
+obj-y += common.o clock.o
+obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o
+obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o
+
+obj-$(CONFIG_PM) += pm.o irq-pm.o
+
+obj-y += dma.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
+obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o
+
+# device support
+
+obj-y += dev-audio.o
+
+obj-y += setup-i2c0.o
+obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o
+obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5p64x0/Makefile.boot b/arch/arm/mach-s5p64x0/Makefile.boot
new file mode 100644
index 00000000000..79ece4055b0
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y += 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
new file mode 100644
index 00000000000..ee1e8e7f563
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -0,0 +1,617 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P6440 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+static u32 epll_div[][5] = {
+ { 36000000, 0, 48, 1, 4 },
+ { 48000000, 0, 32, 1, 3 },
+ { 60000000, 0, 40, 1, 3 },
+ { 72000000, 0, 48, 1, 3 },
+ { 84000000, 0, 28, 1, 2 },
+ { 96000000, 0, 32, 1, 2 },
+ { 32768000, 45264, 43, 1, 4 },
+ { 45158000, 6903, 30, 1, 3 },
+ { 49152000, 50332, 32, 1, 3 },
+ { 67738000, 10398, 45, 1, 3 },
+ { 73728000, 9961, 49, 1, 3 }
+};
+
+static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+
+ if (clk->rate == rate) /* Return if nothing changed */
+ return 0;
+
+ epll_con = __raw_readl(S5P64X0_EPLL_CON);
+ epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+ epll_con_k &= ~(PLL90XX_KDIV_MASK);
+ epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+ epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+ (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+ (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P64X0_EPLL_CON);
+ __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5p6440_epll_ops = {
+ .get_rate = s5p_epll_get_rate,
+ .set_rate = s5p6440_epll_set_rate,
+};
+
+static struct clksrc_clk clk_hclk = {
+ .clk = {
+ .name = "clk_hclk",
+ .parent = &clk_armclk.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+ .clk = {
+ .name = "clk_pclk",
+ .parent = &clk_hclk.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_hclk_low = {
+ .clk = {
+ .name = "clk_hclk_low",
+ },
+ .sources = &clkset_hclk_low,
+ .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+ .clk = {
+ .name = "clk_pclk_low",
+ .parent = &clk_hclk_low.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_off[] = {
+ {
+ .name = "nand",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_mem_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "post",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 5)
+ }, {
+ .name = "2d",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "otg",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 20)
+ }, {
+ .name = "irom",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "lcd",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "hclk_fimgvg",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk1_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "tsi",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk1_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "watchdog",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "rtc",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "timers",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "pcm",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "adc",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "gps",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "dsim",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 28),
+ }, {
+ .name = "etm",
+ .parent = &clk_pclk.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 29),
+ }, {
+ .name = "dmc0",
+ .parent = &clk_pclk.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 30),
+ }, {
+ .name = "pclk_fimgvg",
+ .parent = &clk_pclk.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 31),
+ }, {
+ .name = "mmc_48m",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_48m,
+ .enable = s5p64x0_sclk_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "mmc_48m",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_48m,
+ .enable = s5p64x0_sclk_ctrl,
+ .ctrlbit = (1 << 28),
+ }, {
+ .name = "mmc_48m",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_48m,
+ .enable = s5p64x0_sclk_ctrl,
+ .ctrlbit = (1 << 29),
+ },
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+ {
+ .name = "intc",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mem",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.1",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.2",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.3",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "gpio",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 18),
+ },
+};
+
+static struct clk clk_iis_cd_v40 = {
+ .name = "iis_cdclk_v40",
+};
+
+static struct clk clk_pcm_cd = {
+ .name = "pcm_cdclk",
+};
+
+static struct clk *clkset_group1_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll.clk,
+ &clk_fin_epll,
+};
+
+static struct clksrc_sources clkset_group1 = {
+ .sources = clkset_group1_list,
+ .nr_sources = ARRAY_SIZE(clkset_group1_list),
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_audio_list[] = {
+ &clk_mout_epll.clk,
+ &clk_dout_mpll.clk,
+ &clk_fin_epll,
+ &clk_iis_cd_v40,
+ &clk_pcm_cd,
+};
+
+static struct clksrc_sources clkset_audio = {
+ .sources = clkset_audio_list,
+ .nr_sources = ARRAY_SIZE(clkset_audio_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_post",
+ .ctrlbit = (1 << 10),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_dispcon",
+ .ctrlbit = (1 << 1),
+ .enable = s5p64x0_sclk1_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimgvg",
+ .ctrlbit = (1 << 2),
+ .enable = s5p64x0_sclk1_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_audio2",
+ .ctrlbit = (1 << 11),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_audio,
+ .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 0, .size = 3 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 24, .size = 4 },
+ },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 24),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 25),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 26),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 5),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 20),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 21),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+ &clk_dout_mpll,
+ &clk_armclk,
+ &clk_hclk,
+ &clk_pclk,
+ &clk_hclk_low,
+ &clk_pclk_low,
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2
+};
+
+static struct clk_lookup s5p6440_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+};
+
+void __init_or_cpufreq s5p6440_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long hclk_low;
+ unsigned long pclk;
+ unsigned long pclk_low;
+
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned int ptr;
+
+ /* Set S5P6440 functions for clk_fout_epll */
+
+ clk_fout_epll.enable = s5p_epll_enable;
+ clk_fout_epll.ops = &s5p6440_epll_ops;
+
+ clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+ xtal_clk = clk_get(NULL, "ext_xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+ epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+ __raw_readl(S5P64X0_EPLL_CON_K));
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+
+ printk(KERN_INFO "S5P6440: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+ " E=%ld.%ldMHz\n",
+ print_mhz(apll), print_mhz(mpll), print_mhz(epll));
+
+ fclk = clk_get_rate(&clk_armclk.clk);
+ hclk = clk_get_rate(&clk_hclk.clk);
+ pclk = clk_get_rate(&clk_pclk.clk);
+ hclk_low = clk_get_rate(&clk_hclk_low.clk);
+ pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+ printk(KERN_INFO "S5P6440: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+ " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+ print_mhz(hclk), print_mhz(hclk_low),
+ print_mhz(pclk), print_mhz(pclk_low));
+
+ clk_f.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_iis_cd_v40,
+ &clk_pcm_cd,
+};
+
+void __init s5p6440_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
+
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
new file mode 100644
index 00000000000..dae6a13f43b
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -0,0 +1,680 @@
+/* linux/arch/arm/mach-s5p64x0/clock-s5p6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P6450 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/s5p64x0-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+static struct clksrc_clk clk_mout_dpll = {
+ .clk = {
+ .name = "mout_dpll",
+ },
+ .sources = &clk_src_dpll,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 },
+};
+
+static u32 epll_div[][5] = {
+ { 133000000, 27307, 55, 2, 2 },
+ { 100000000, 43691, 41, 2, 2 },
+ { 480000000, 0, 80, 2, 0 },
+};
+
+static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+
+ if (clk->rate == rate) /* Return if nothing changed */
+ return 0;
+
+ epll_con = __raw_readl(S5P64X0_EPLL_CON);
+ epll_con_k = __raw_readl(S5P64X0_EPLL_CON_K);
+
+ epll_con_k &= ~(PLL90XX_KDIV_MASK);
+ epll_con &= ~(PLL90XX_MDIV_MASK | PLL90XX_PDIV_MASK | PLL90XX_SDIV_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k |= (epll_div[i][1] << PLL90XX_KDIV_SHIFT);
+ epll_con |= (epll_div[i][2] << PLL90XX_MDIV_SHIFT) |
+ (epll_div[i][3] << PLL90XX_PDIV_SHIFT) |
+ (epll_div[i][4] << PLL90XX_SDIV_SHIFT);
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n", __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(epll_con, S5P64X0_EPLL_CON);
+ __raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
+
+ printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+ clk->rate, rate);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops s5p6450_epll_ops = {
+ .get_rate = s5p_epll_get_rate,
+ .set_rate = s5p6450_epll_set_rate,
+};
+
+static struct clksrc_clk clk_dout_epll = {
+ .clk = {
+ .name = "dout_epll",
+ .parent = &clk_mout_epll.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_mout_hclk_sel = {
+ .clk = {
+ .name = "mout_hclk_sel",
+ },
+ .sources = &clkset_hclk_low,
+ .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 },
+};
+
+static struct clk *clkset_hclk_list[] = {
+ &clk_mout_hclk_sel.clk,
+ &clk_armclk.clk,
+};
+
+static struct clksrc_sources clkset_hclk = {
+ .sources = clkset_hclk_list,
+ .nr_sources = ARRAY_SIZE(clkset_hclk_list),
+};
+
+static struct clksrc_clk clk_hclk = {
+ .clk = {
+ .name = "clk_hclk",
+ },
+ .sources = &clkset_hclk,
+ .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk = {
+ .clk = {
+ .name = "clk_pclk",
+ .parent = &clk_hclk.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 },
+};
+static struct clksrc_clk clk_dout_pwm_ratio0 = {
+ .clk = {
+ .name = "clk_dout_pwm_ratio0",
+ .parent = &clk_mout_hclk_sel.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_to_wdt_pwm = {
+ .clk = {
+ .name = "clk_pclk_to_wdt_pwm",
+ .parent = &clk_dout_pwm_ratio0.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_hclk_low = {
+ .clk = {
+ .name = "clk_hclk_low",
+ },
+ .sources = &clkset_hclk_low,
+ .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_pclk_low = {
+ .clk = {
+ .name = "clk_pclk_low",
+ .parent = &clk_hclk_low.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 },
+};
+
+/*
+ * The following clocks will be disabled during clock initialization. It is
+ * recommended to keep the following clocks disabled until the driver requests
+ * for enabling the clock.
+ */
+static struct clk init_clocks_off[] = {
+ {
+ .name = "usbhost",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "dma",
+ .devname = "dma-pl330",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "usbotg",
+ .parent = &clk_hclk_low.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "lcd",
+ .parent = &clk_h,
+ .enable = s5p64x0_hclk1_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "watchdog",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "rtc",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "adc",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "dmc0",
+ .parent = &clk_pclk.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 30),
+ }
+};
+
+/*
+ * The following clocks will be enabled during clock initialization.
+ */
+static struct clk init_clocks[] = {
+ {
+ .name = "intc",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "mem",
+ .parent = &clk_hclk.clk,
+ .enable = s5p64x0_hclk0_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.0",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.1",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.2",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s3c6400-uart.3",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "timers",
+ .parent = &clk_pclk_to_wdt_pwm.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "gpio",
+ .parent = &clk_pclk_low.clk,
+ .enable = s5p64x0_pclk_ctrl,
+ .ctrlbit = (1 << 18),
+ },
+};
+
+static struct clk *clkset_uart_list[] = {
+ &clk_dout_epll.clk,
+ &clk_dout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clk *clkset_mali_list[] = {
+ &clk_mout_epll.clk,
+ &clk_mout_apll.clk,
+ &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clkset_mali = {
+ .sources = clkset_mali_list,
+ .nr_sources = ARRAY_SIZE(clkset_mali_list),
+};
+
+static struct clk *clkset_group2_list[] = {
+ &clk_dout_epll.clk,
+ &clk_dout_mpll.clk,
+ &clk_ext_xtal_mux,
+};
+
+static struct clksrc_sources clkset_group2 = {
+ .sources = clkset_group2_list,
+ .nr_sources = ARRAY_SIZE(clkset_group2_list),
+};
+
+static struct clk *clkset_dispcon_list[] = {
+ &clk_dout_epll.clk,
+ &clk_dout_mpll.clk,
+ &clk_ext_xtal_mux,
+ &clk_mout_dpll.clk,
+};
+
+static struct clksrc_sources clkset_dispcon = {
+ .sources = clkset_dispcon_list,
+ .nr_sources = ARRAY_SIZE(clkset_dispcon_list),
+};
+
+static struct clk *clkset_hsmmc44_list[] = {
+ &clk_dout_epll.clk,
+ &clk_dout_mpll.clk,
+ &clk_ext_xtal_mux,
+ &s5p_clk_27m,
+ &clk_48m,
+};
+
+static struct clksrc_sources clkset_hsmmc44 = {
+ .sources = clkset_hsmmc44_list,
+ .nr_sources = ARRAY_SIZE(clkset_hsmmc44_list),
+};
+
+static struct clk *clkset_sclk_audio0_list[] = {
+ [0] = &clk_dout_epll.clk,
+ [1] = &clk_dout_mpll.clk,
+ [2] = &clk_ext_xtal_mux,
+ [3] = NULL,
+ [4] = NULL,
+};
+
+static struct clksrc_sources clkset_sclk_audio0 = {
+ .sources = clkset_sclk_audio0_list,
+ .nr_sources = ARRAY_SIZE(clkset_sclk_audio0_list),
+};
+
+static struct clksrc_clk clk_sclk_audio0 = {
+ .clk = {
+ .name = "audio-bus",
+ .enable = s5p64x0_sclk_ctrl,
+ .ctrlbit = (1 << 8),
+ .parent = &clk_dout_epll.clk,
+ },
+ .sources = &clkset_sclk_audio0,
+ .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 10, .size = 3 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_fimc",
+ .ctrlbit = (1 << 10),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 26, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "aclk_mali",
+ .ctrlbit = (1 << 2),
+ .enable = s5p64x0_sclk1_ctrl,
+ },
+ .sources = &clkset_mali,
+ .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_2d",
+ .ctrlbit = (1 << 12),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_mali,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 30, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_usi",
+ .ctrlbit = (1 << 7),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 10, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_camif",
+ .ctrlbit = (1 << 6),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 28, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_dispcon",
+ .ctrlbit = (1 << 1),
+ .enable = s5p64x0_sclk1_ctrl,
+ },
+ .sources = &clkset_dispcon,
+ .reg_src = { .reg = S5P64X0_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_hsmmc44",
+ .ctrlbit = (1 << 30),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_hsmmc44,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 6, .size = 3 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 28, .size = 4 },
+ },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 24),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 25),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 26),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 5),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 20),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 21),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+};
+
+static struct clk_lookup s5p6450_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *sysclks[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_dout_epll,
+ &clk_mout_mpll,
+ &clk_dout_mpll,
+ &clk_armclk,
+ &clk_mout_hclk_sel,
+ &clk_dout_pwm_ratio0,
+ &clk_pclk_to_wdt_pwm,
+ &clk_hclk,
+ &clk_pclk,
+ &clk_hclk_low,
+ &clk_pclk_low,
+ &clk_sclk_audio0,
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
+void __init_or_cpufreq s5p6450_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+
+ unsigned long xtal;
+ unsigned long fclk;
+ unsigned long hclk;
+ unsigned long hclk_low;
+ unsigned long pclk;
+ unsigned long pclk_low;
+
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long dpll;
+ unsigned int ptr;
+
+ /* Set S5P6450 functions for clk_fout_epll */
+
+ clk_fout_epll.enable = s5p_epll_enable;
+ clk_fout_epll.ops = &s5p6450_epll_ops;
+
+ clk_48m.enable = s5p64x0_clk48m_ctrl;
+
+ xtal_clk = clk_get(NULL, "ext_xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_APLL_CON), pll_4502);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P64X0_MPLL_CON), pll_4502);
+ epll = s5p_get_pll90xx(xtal, __raw_readl(S5P64X0_EPLL_CON),
+ __raw_readl(S5P64X0_EPLL_CON_K));
+ dpll = s5p_get_pll46xx(xtal, __raw_readl(S5P6450_DPLL_CON),
+ __raw_readl(S5P6450_DPLL_CON_K), pll_4650c);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_dpll.rate = dpll;
+
+ printk(KERN_INFO "S5P6450: PLL settings, A=%ld.%ldMHz, M=%ld.%ldMHz," \
+ " E=%ld.%ldMHz, D=%ld.%ldMHz\n",
+ print_mhz(apll), print_mhz(mpll), print_mhz(epll),
+ print_mhz(dpll));
+
+ fclk = clk_get_rate(&clk_armclk.clk);
+ hclk = clk_get_rate(&clk_hclk.clk);
+ pclk = clk_get_rate(&clk_pclk.clk);
+ hclk_low = clk_get_rate(&clk_hclk_low.clk);
+ pclk_low = clk_get_rate(&clk_pclk_low.clk);
+
+ printk(KERN_INFO "S5P6450: HCLK=%ld.%ldMHz, HCLK_LOW=%ld.%ldMHz," \
+ " PCLK=%ld.%ldMHz, PCLK_LOW=%ld.%ldMHz\n",
+ print_mhz(hclk), print_mhz(hclk_low),
+ print_mhz(pclk), print_mhz(pclk_low));
+
+ clk_f.rate = fclk;
+ clk_h.rate = hclk;
+ clk_p.rate = pclk;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+void __init s5p6450_register_clocks(void)
+{
+ int ptr;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+ s3c_register_clksrc(sysclks[ptr], 1);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
+ s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
+
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
new file mode 100644
index 00000000000..241d0e645c8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -0,0 +1,235 @@
+/* linux/arch/arm/mach-s5p64x0/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+
+#include "common.h"
+
+struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 1, .size = 1 },
+};
+
+struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 2, .size = 1 },
+};
+
+enum perf_level {
+ L0 = 532*1000,
+ L1 = 266*1000,
+ L2 = 133*1000,
+};
+
+static const u32 clock_table[][3] = {
+ /*{ARM_CLK, DIVarm, DIVhclk}*/
+ {L0 * 1000, (0 << ARM_DIV_RATIO_SHIFT), (3 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+ {L1 * 1000, (1 << ARM_DIV_RATIO_SHIFT), (1 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+ {L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
+};
+
+unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv;
+
+ /* divisor mask starts at bit0, so no need to shift */
+ clkdiv = __raw_readl(ARM_CLK_DIV) & ARM_DIV_MASK;
+
+ return rate / (clkdiv + 1);
+}
+
+unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate)
+{
+ u32 iter;
+
+ for (iter = 1 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+ if (rate > clock_table[iter][0])
+ return clock_table[iter-1][0];
+ }
+
+ return clock_table[ARRAY_SIZE(clock_table) - 1][0];
+}
+
+int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 round_tmp;
+ u32 iter;
+ u32 clk_div0_tmp;
+ u32 cur_rate = clk->ops->get_rate(clk);
+ unsigned long flags;
+
+ round_tmp = clk->ops->round_rate(clk, rate);
+ if (round_tmp == cur_rate)
+ return 0;
+
+
+ for (iter = 0 ; iter < ARRAY_SIZE(clock_table) ; iter++) {
+ if (round_tmp == clock_table[iter][0])
+ break;
+ }
+
+ if (iter >= ARRAY_SIZE(clock_table))
+ iter = ARRAY_SIZE(clock_table) - 1;
+
+ local_irq_save(flags);
+ if (cur_rate > round_tmp) {
+ /* Frequency Down */
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+ clk_div0_tmp |= clock_table[iter][1];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+ ~(S5P64X0_CLKDIV0_HCLK_MASK);
+ clk_div0_tmp |= clock_table[iter][2];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+
+ } else {
+ /* Frequency Up */
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) &
+ ~(S5P64X0_CLKDIV0_HCLK_MASK);
+ clk_div0_tmp |= clock_table[iter][2];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+
+ clk_div0_tmp = __raw_readl(ARM_CLK_DIV) & ~(ARM_DIV_MASK);
+ clk_div0_tmp |= clock_table[iter][1];
+ __raw_writel(clk_div0_tmp, ARM_CLK_DIV);
+ }
+ local_irq_restore(flags);
+
+ clk->rate = clock_table[iter][0];
+
+ return 0;
+}
+
+struct clk_ops s5p64x0_clkarm_ops = {
+ .get_rate = s5p64x0_armclk_get_rate,
+ .set_rate = s5p64x0_armclk_set_rate,
+ .round_rate = s5p64x0_armclk_round_rate,
+};
+
+struct clksrc_clk clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .id = 1,
+ .parent = &clk_mout_apll.clk,
+ .ops = &s5p64x0_clkarm_ops,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 0, .size = 4 },
+};
+
+struct clksrc_clk clk_dout_mpll = {
+ .clk = {
+ .name = "dout_mpll",
+ .id = -1,
+ .parent = &clk_mout_mpll.clk,
+ },
+ .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
+};
+
+struct clk *clkset_hclk_low_list[] = {
+ &clk_mout_apll.clk,
+ &clk_mout_mpll.clk,
+};
+
+struct clksrc_sources clkset_hclk_low = {
+ .sources = clkset_hclk_low_list,
+ .nr_sources = ARRAY_SIZE(clkset_hclk_low_list),
+};
+
+int s5p64x0_pclk_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P64X0_CLK_GATE_PCLK, clk, enable);
+}
+
+int s5p64x0_hclk0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK0, clk, enable);
+}
+
+int s5p64x0_hclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P64X0_CLK_GATE_HCLK1, clk, enable);
+}
+
+int s5p64x0_sclk_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK0, clk, enable);
+}
+
+int s5p64x0_sclk1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P64X0_CLK_GATE_SCLK1, clk, enable);
+}
+
+int s5p64x0_mem_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P64X0_CLK_GATE_MEM0, clk, enable);
+}
+
+int s5p64x0_clk48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S5P64X0_OTHERS);
+ if (enable)
+ val |= S5P64X0_OTHERS_USB_SIG_MASK;
+ else
+ val &= ~S5P64X0_OTHERS_USB_SIG_MASK;
+
+ __raw_writel(val, S5P64X0_OTHERS);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
new file mode 100644
index 00000000000..52b89a37644
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Codes for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/irq.h>
+#include <asm/proc-fns.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/map.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/pm.h>
+#include <plat/sdhci.h>
+#include <plat/adc-core.h>
+#include <plat/fb-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-irqtype.h>
+#include <plat/regs-serial.h>
+#include <plat/watchdog-reset.h>
+
+#include "common.h"
+
+static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6450[] = "S5P6450";
+
+static struct cpu_table cpu_ids[] __initdata = {
+ {
+ .idcode = S5P6440_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
+ .map_io = s5p6440_map_io,
+ .init_clocks = s5p6440_init_clocks,
+ .init_uarts = s5p6440_init_uarts,
+ .init = s5p64x0_init,
+ .name = name_s5p6440,
+ }, {
+ .idcode = S5P6450_CPU_ID,
+ .idmask = S5P64XX_CPU_MASK,
+ .map_io = s5p6450_map_io,
+ .init_clocks = s5p6450_init_clocks,
+ .init_uarts = s5p6450_init_uarts,
+ .init = s5p64x0_init,
+ .name = name_s5p6450,
+ },
+};
+
+/* Initial IO mappings */
+
+static struct map_desc s5p64x0_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P64X0_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(S5P64X0_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(S5P64X0_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S5P64X0_PA_WDT),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5P64X0_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GPIO,
+ .pfn = __phys_to_pfn(S5P64X0_PA_GPIO),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC0,
+ .pfn = __phys_to_pfn(S5P64X0_PA_VIC0),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC1,
+ .pfn = __phys_to_pfn(S5P64X0_PA_VIC1),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc s5p6440_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S5P6440_PA_UART(0)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct map_desc s5p6450_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S5P6450_PA_UART(0)),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART + SZ_512K,
+ .pfn = __phys_to_pfn(S5P6450_PA_UART(5)),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void s5p64x0_idle(void)
+{
+ unsigned long val;
+
+ if (!need_resched()) {
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
+
+ cpu_do_idle();
+ }
+ local_irq_enable();
+}
+
+/*
+ * s5p64x0_map_io
+ *
+ * register the standard CPU IO areas
+ */
+
+void __init s5p64x0_init_io(struct map_desc *mach_desc, int size)
+{
+ /* initialize the io descriptors we need for initialization */
+ iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
+ if (mach_desc)
+ iotable_init(mach_desc, size);
+
+ /* detect cpu id and rev. */
+ s5p_init_cpu(S5P64X0_SYS_ID);
+
+ s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init s5p6440_map_io(void)
+{
+ /* initialize any device information early */
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
+
+ s5p64x0_default_sdhci0();
+ s5p64x0_default_sdhci1();
+ s5p6440_default_sdhci2();
+
+ iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
+}
+
+void __init s5p6450_map_io(void)
+{
+ /* initialize any device information early */
+ s3c_adc_setname("s3c64xx-adc");
+ s3c_fb_setname("s5p64x0-fb");
+
+ s5p64x0_default_sdhci0();
+ s5p64x0_default_sdhci1();
+ s5p6450_default_sdhci2();
+
+ iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
+}
+
+/*
+ * s5p64x0_init_clocks
+ *
+ * register and setup the CPU clocks
+ */
+
+void __init s5p6440_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6440_register_clocks();
+ s5p6440_setup_clocks();
+}
+
+void __init s5p6450_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6450_register_clocks();
+ s5p6450_setup_clocks();
+}
+
+/*
+ * s5p64x0_init_irq
+ *
+ * register the CPU interrupts
+ */
+
+void __init s5p6440_init_irq(void)
+{
+ /* S5P6440 supports 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[3, 4, 8, 10, (12-22)]
+ * VIC1 is missing IRQ VIC1[1, 3, 4, 10, 11, 12, 14, 15, 22]
+ */
+ vic[0] = 0xff800ae7;
+ vic[1] = 0xffbf23e5;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+void __init s5p6450_init_irq(void)
+{
+ /* S5P6450 supports only 2 VIC */
+ u32 vic[2];
+
+ /*
+ * VIC0 is missing IRQ_VIC0[(13-15), (21-22)]
+ * VIC1 is missing IRQ VIC1[12, 14, 23]
+ */
+ vic[0] = 0xff9f1fff;
+ vic[1] = 0xff7fafff;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+struct bus_type s5p64x0_subsys = {
+ .name = "s5p64x0-core",
+ .dev_name = "s5p64x0-core",
+};
+
+static struct device s5p64x0_dev = {
+ .bus = &s5p64x0_subsys,
+};
+
+static int __init s5p64x0_core_init(void)
+{
+ return subsys_system_register(&s5p64x0_subsys, NULL);
+}
+core_initcall(s5p64x0_core_init);
+
+int __init s5p64x0_init(void)
+{
+ printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5p64x0_idle;
+
+ return device_register(&s5p64x0_dev);
+}
+
+/* uart registration process */
+void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ int uart;
+
+ for (uart = 0; uart < no; uart++) {
+ s5p_uart_resources[uart].resources->start = S5P6440_PA_UART(uart);
+ s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
+ }
+
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
+}
+
+#define eint_offset(irq) ((irq) - IRQ_EINT(0))
+
+static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+ int offs = eint_offset(data->irq);
+ int shift;
+ u32 ctrl, mask;
+ u32 newvalue = 0;
+
+ if (offs > 15)
+ return -EINVAL;
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ printk(KERN_WARNING "No edge setting!\n");
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ newvalue = S3C2410_EXTINT_RISEEDGE;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ newvalue = S3C2410_EXTINT_FALLEDGE;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ newvalue = S3C2410_EXTINT_BOTHEDGE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ newvalue = S3C2410_EXTINT_LOWLEV;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ newvalue = S3C2410_EXTINT_HILEV;
+ break;
+ default:
+ printk(KERN_ERR "No such irq type %d", type);
+ return -EINVAL;
+ }
+
+ shift = (offs / 2) * 4;
+ mask = 0x7 << shift;
+
+ ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask;
+ ctrl |= newvalue << shift;
+ __raw_writel(ctrl, S5P64X0_EINT0CON0);
+
+ /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
+
+ return 0;
+}
+
+/*
+ * s5p64x0_irq_demux_eint
+ *
+ * This function demuxes the IRQ from the group0 external interrupts,
+ * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into
+ * the specific handlers s5p64x0_irq_demux_eintX_Y.
+ */
+static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end)
+{
+ u32 status = __raw_readl(S5P64X0_EINT0PEND);
+ u32 mask = __raw_readl(S5P64X0_EINT0MASK);
+ unsigned int irq;
+
+ status &= ~mask;
+ status >>= start;
+ status &= (1 << (end - start + 1)) - 1;
+
+ for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+ if (status & 1)
+ generic_handle_irq(irq);
+ status >>= 1;
+ }
+}
+
+static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(0, 3);
+}
+
+static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(4, 11);
+}
+
+static void s5p64x0_irq_demux_eint12_15(unsigned int irq,
+ struct irq_desc *desc)
+{
+ s5p64x0_irq_demux_eint(12, 15);
+}
+
+static int s5p64x0_alloc_gc(void)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE,
+ S5P_VA_GPIO, handle_level_irq);
+ if (!gc) {
+ printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0"
+ "external interrupts failed\n", __func__);
+ return -EINVAL;
+ }
+
+ ct = gc->chip_types;
+ ct->chip.irq_ack = irq_gc_ack_set_bit;
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;
+ ct->chip.irq_set_wake = s3c_irqext_wake;
+ ct->regs.ack = EINT0PEND_OFFSET;
+ ct->regs.mask = EINT0MASK_OFFSET;
+ irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+ return 0;
+}
+
+static int __init s5p64x0_init_irq_eint(void)
+{
+ int ret = s5p64x0_alloc_gc();
+ irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3);
+ irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11);
+ irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15);
+
+ return ret;
+}
+arch_initcall(s5p64x0_init_irq_eint);
+
+void s5p64x0_restart(char mode, const char *cmd)
+{
+ if (mode != 's')
+ arch_wdt_reset();
+
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-s5p64x0/common.h b/arch/arm/mach-s5p64x0/common.h
new file mode 100644
index 00000000000..f8a60fdc588
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/common.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Common Header for S5P64X0 machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S5P64X0_COMMON_H
+#define __ARCH_ARM_MACH_S5P64X0_COMMON_H
+
+void s5p6440_init_irq(void);
+void s5p6450_init_irq(void);
+void s5p64x0_init_io(struct map_desc *mach_desc, int size);
+
+void s5p6440_register_clocks(void);
+void s5p6440_setup_clocks(void);
+
+void s5p6450_register_clocks(void);
+void s5p6450_setup_clocks(void);
+
+void s5p64x0_restart(char mode, const char *cmd);
+
+#ifdef CONFIG_CPU_S5P6440
+
+extern int s5p64x0_init(void);
+extern void s5p6440_map_io(void);
+extern void s5p6440_init_clocks(int xtal);
+
+extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6440_init_clocks NULL
+#define s5p6440_init_uarts NULL
+#define s5p6440_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S5P6450
+
+extern int s5p64x0_init(void);
+extern void s5p6450_map_io(void);
+extern void s5p6450_init_clocks(int xtal);
+
+extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+#else
+#define s5p6450_init_clocks NULL
+#define s5p6450_init_uarts NULL
+#define s5p6450_map_io NULL
+#define s5p64x0_init NULL
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5P64X0_COMMON_H */
diff --git a/arch/arm/mach-s5p64x0/dev-audio.c b/arch/arm/mach-s5p64x0/dev-audio.c
new file mode 100644
index 00000000000..35f1f226dab
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dev-audio.c
@@ -0,0 +1,236 @@
+/* linux/arch/arm/mach-s5p64x0/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc[] = {
+ [0] = "iis",
+ [1] = "sclk_audio2",
+};
+
+static int s5p6440_cfg_i2s(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5P6440_GPC(4), 2, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin(S5P6440_GPC(7), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6440_GPH(6), 4, S3C_GPIO_SFN(5));
+ break;
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_i2s_pdata = {
+ .cfg_gpio = s5p6440_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN,
+ .src_clk = rclksrc,
+ },
+ },
+};
+
+static struct resource s5p64x0_i2s0_resource[] = {
+ [0] = {
+ .start = S5P64X0_PA_I2S,
+ .end = S5P64X0_PA_I2S + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S0_TX,
+ .end = DMACH_I2S0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S0_RX,
+ .end = DMACH_I2S0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6440_device_iis = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource),
+ .resource = s5p64x0_i2s0_resource,
+ .dev = {
+ .platform_data = &s5p6440_i2s_pdata,
+ },
+};
+
+static int s5p6450_cfg_i2s(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
+ break;
+ case 1:
+ s3c_gpio_cfgpin(S5P6440_GPB(4), S3C_GPIO_SFN(5));
+ s3c_gpio_cfgpin_range(S5P6450_GPC(0), 4, S3C_GPIO_SFN(5));
+ break;
+ case 2:
+ s3c_gpio_cfgpin_range(S5P6450_GPK(0), 5, S3C_GPIO_SFN(5));
+ break;
+ default:
+ printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s5p6450_i2s0_pdata = {
+ .cfg_gpio = s5p6450_cfg_i2s,
+ .type = {
+ .i2s = {
+ .quirks = QUIRK_PRI_6CHAN,
+ .src_clk = rclksrc,
+ },
+ },
+};
+
+struct platform_device s5p6450_device_iis0 = {
+ .name = "samsung-i2s",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p64x0_i2s0_resource),
+ .resource = s5p64x0_i2s0_resource,
+ .dev = {
+ .platform_data = &s5p6450_i2s0_pdata,
+ },
+};
+
+static struct s3c_audio_pdata s5p6450_i2s_pdata = {
+ .cfg_gpio = s5p6450_cfg_i2s,
+ .type = {
+ .i2s = {
+ .src_clk = rclksrc,
+ },
+ },
+};
+
+static struct resource s5p6450_i2s1_resource[] = {
+ [0] = {
+ .start = S5P6450_PA_I2S1,
+ .end = S5P6450_PA_I2S1 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S1_TX,
+ .end = DMACH_I2S1_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S1_RX,
+ .end = DMACH_I2S1_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6450_device_iis1 = {
+ .name = "samsung-i2s",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s5p6450_i2s1_resource),
+ .resource = s5p6450_i2s1_resource,
+ .dev = {
+ .platform_data = &s5p6450_i2s_pdata,
+ },
+};
+
+static struct resource s5p6450_i2s2_resource[] = {
+ [0] = {
+ .start = S5P6450_PA_I2S2,
+ .end = S5P6450_PA_I2S2 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_I2S2_TX,
+ .end = DMACH_I2S2_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_I2S2_RX,
+ .end = DMACH_I2S2_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6450_device_iis2 = {
+ .name = "samsung-i2s",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s5p6450_i2s2_resource),
+ .resource = s5p6450_i2s2_resource,
+ .dev = {
+ .platform_data = &s5p6450_i2s_pdata,
+ },
+};
+
+/* PCM Controller platform_devices */
+
+static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
+{
+ switch (pdev->id) {
+ case 0:
+ s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
+ break;
+
+ default:
+ printk(KERN_DEBUG "Invalid PCM Controller number!");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct s3c_audio_pdata s5p6440_pcm_pdata = {
+ .cfg_gpio = s5p6440_pcm_cfg_gpio,
+};
+
+static struct resource s5p6440_pcm0_resource[] = {
+ [0] = {
+ .start = S5P64X0_PA_PCM,
+ .end = S5P64X0_PA_PCM + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_PCM0_TX,
+ .end = DMACH_PCM0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_PCM0_RX,
+ .end = DMACH_PCM0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device s5p6440_device_pcm = {
+ .name = "samsung-pcm",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p6440_pcm0_resource),
+ .resource = s5p6440_pcm0_resource,
+ .dev = {
+ .platform_data = &s5p6440_pcm_pdata,
+ },
+};
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
new file mode 100644
index 00000000000..f820c074440
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -0,0 +1,142 @@
+/* linux/arch/arm/mach-s5p64x0/dma.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/dma-mapping.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl330.h>
+
+#include <asm/irq.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+#include <mach/regs-clock.h>
+#include <mach/dma.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+u8 s5p6440_pdma_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+};
+
+struct dma_pl330_platdata s5p6440_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
+ .peri_id = s5p6440_pdma_peri,
+};
+
+u8 s5p6450_pdma_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_PCM1_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM2_TX,
+ DMACH_PCM2_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_USI_TX,
+ DMACH_USI_RX,
+ DMACH_MAX,
+ DMACH_I2S1_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S2_TX,
+ DMACH_I2S2_RX,
+ DMACH_PWM,
+ DMACH_UART5_RX,
+ DMACH_UART5_TX,
+};
+
+struct dma_pl330_platdata s5p6450_pdma_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
+ .peri_id = s5p6450_pdma_peri,
+};
+
+struct amba_device s5p64x0_device_pdma = {
+ .dev = {
+ .init_name = "dma-pl330",
+ .dma_mask = &dma_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .res = {
+ .start = S5P64X0_PA_PDMA,
+ .end = S5P64X0_PA_PDMA + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_DMA0, NO_IRQ},
+ .periphid = 0x00041330,
+};
+
+static int __init s5p64x0_dma_init(void)
+{
+ if (soc_is_s5p6450()) {
+ dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
+ s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+ } else {
+ dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
+ s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ }
+
+ amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+
+ return 0;
+}
+arch_initcall(s5p64x0_dma_init);
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
new file mode 100644
index 00000000000..700dac6c43f
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -0,0 +1,508 @@
+/* linux/arch/arm/mach-s5p64x0/gpiolib.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+/*
+ * S5P6440 GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 6 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * F 2 2Bit Yes 4 [1]
+ * G 7 4Bit Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * N 16 2Bit No IRQ_EINT
+ * P 8 2Bit Yes 8
+ * R 15 4Bit[2] Yes 8
+ *
+ * S5P6450 GPIO bank summary:
+ *
+ * Bank GPIOs Style SlpCon ExtInt Group
+ * A 6 4Bit Yes 1
+ * B 7 4Bit Yes 1
+ * C 8 4Bit Yes 2
+ * D 8 4Bit Yes None
+ * F 2 2Bit Yes None
+ * G 14 4Bit[2] Yes 5
+ * H 10 4Bit[2] Yes 6
+ * I 16 2Bit Yes None
+ * J 12 2Bit Yes None
+ * K 5 4Bit Yes None
+ * N 16 2Bit No IRQ_EINT
+ * P 11 2Bit Yes 8
+ * Q 14 2Bit Yes None
+ * R 15 4Bit[2] Yes None
+ * S 8 2Bit Yes None
+ *
+ * [1] BANKF pins 14,15 do not form part of the external interrupt sources
+ * [2] BANK has two control registers, GPxCON0 and GPxCON1
+ */
+
+static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
+ unsigned int offset)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long flags;
+
+ switch (offset) {
+ case 6:
+ offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ offset -= 7;
+ break;
+ }
+
+ s3c_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(offset));
+ __raw_writel(con, regcon);
+
+ s3c_gpio_unlock(ourchip, flags);
+
+ return 0;
+}
+
+static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+ void __iomem *base = ourchip->base;
+ void __iomem *regcon = base;
+ unsigned long con;
+ unsigned long dat;
+ unsigned long flags;
+ unsigned con_offset = offset;
+
+ switch (con_offset) {
+ case 6:
+ con_offset += 1;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ regcon -= 4;
+ break;
+ default:
+ con_offset -= 7;
+ break;
+ }
+
+ s3c_gpio_lock(ourchip, flags);
+
+ con = __raw_readl(regcon);
+ con &= ~(0xf << con_4bit_shift(con_offset));
+ con |= 0x1 << con_4bit_shift(con_offset);
+
+ dat = __raw_readl(base + GPIODAT_OFF);
+ if (value)
+ dat |= 1 << offset;
+ else
+ dat &= ~(1 << offset);
+
+ __raw_writel(con, regcon);
+ __raw_writel(dat, base + GPIODAT_OFF);
+
+ s3c_gpio_unlock(ourchip, flags);
+
+ return 0;
+}
+
+int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
+ unsigned int off, unsigned int cfg)
+{
+ void __iomem *reg = chip->base;
+ unsigned int shift;
+ u32 con;
+
+ switch (off) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ shift = (off & 7) * 4;
+ reg -= 4;
+ break;
+ case 6:
+ shift = ((off + 1) & 7) * 4;
+ reg -= 4;
+ default:
+ shift = ((off + 1) & 7) * 4;
+ break;
+ }
+
+ if (s3c_gpio_is_cfg_special(cfg)) {
+ cfg &= 0xf;
+ cfg <<= shift;
+ }
+
+ con = __raw_readl(reg);
+ con &= ~(0xf << shift);
+ con |= cfg;
+ __raw_writel(con, reg);
+
+ return 0;
+}
+
+static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
+ {
+ .cfg_eint = 0,
+ }, {
+ .cfg_eint = 7,
+ }, {
+ .cfg_eint = 3,
+ .set_config = s5p64x0_gpio_setcfg_4bit_rbank,
+ }, {
+ .cfg_eint = 0,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .get_config = s3c_gpio_getcfg_s3c24xx,
+ }, {
+ .cfg_eint = 2,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .get_config = s3c_gpio_getcfg_s3c24xx,
+ }, {
+ .cfg_eint = 3,
+ .set_config = s3c_gpio_setcfg_s3c24xx,
+ .get_config = s3c_gpio_getcfg_s3c24xx,
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
+ {
+ .base = S5P64X0_GPA_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPA(0),
+ .ngpio = S5P6440_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .base = S5P64X0_GPB_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPB(0),
+ .ngpio = S5P6440_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S5P64X0_GPC_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPC(0),
+ .ngpio = S5P6440_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5P64X0_GPG_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPG(0),
+ .ngpio = S5P6440_GPIO_G_NR,
+ .label = "GPG",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
+ {
+ .base = S5P64X0_GPH_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6440_GPH(0),
+ .ngpio = S5P6440_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
+ {
+ .base = S5P64X0_GPR_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfgs[2],
+ .chip = {
+ .base = S5P6440_GPR(0),
+ .ngpio = S5P6440_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
+ {
+ .base = S5P64X0_GPF_BASE,
+ .config = &s5p64x0_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6440_GPF(0),
+ .ngpio = S5P6440_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P64X0_GPI_BASE,
+ .config = &s5p64x0_gpio_cfgs[3],
+ .chip = {
+ .base = S5P6440_GPI(0),
+ .ngpio = S5P6440_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P64X0_GPJ_BASE,
+ .config = &s5p64x0_gpio_cfgs[3],
+ .chip = {
+ .base = S5P6440_GPJ(0),
+ .ngpio = S5P6440_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P64X0_GPN_BASE,
+ .config = &s5p64x0_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6440_GPN(0),
+ .ngpio = S5P6440_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P64X0_GPP_BASE,
+ .config = &s5p64x0_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6440_GPP(0),
+ .ngpio = S5P6440_GPIO_P_NR,
+ .label = "GPP",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
+ {
+ .base = S5P64X0_GPA_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPA(0),
+ .ngpio = S5P6450_GPIO_A_NR,
+ .label = "GPA",
+ },
+ }, {
+ .base = S5P64X0_GPB_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPB(0),
+ .ngpio = S5P6450_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .base = S5P64X0_GPC_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPC(0),
+ .ngpio = S5P6450_GPIO_C_NR,
+ .label = "GPC",
+ },
+ }, {
+ .base = S5P6450_GPD_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPD(0),
+ .ngpio = S5P6450_GPIO_D_NR,
+ .label = "GPD",
+ },
+ }, {
+ .base = S5P6450_GPK_BASE,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPK(0),
+ .ngpio = S5P6450_GPIO_K_NR,
+ .label = "GPK",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
+ {
+ .base = S5P64X0_GPG_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPG(0),
+ .ngpio = S5P6450_GPIO_G_NR,
+ .label = "GPG",
+ },
+ }, {
+ .base = S5P64X0_GPH_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfgs[1],
+ .chip = {
+ .base = S5P6450_GPH(0),
+ .ngpio = S5P6450_GPIO_H_NR,
+ .label = "GPH",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
+ {
+ .base = S5P64X0_GPR_BASE + 0x4,
+ .config = &s5p64x0_gpio_cfgs[2],
+ .chip = {
+ .base = S5P6450_GPR(0),
+ .ngpio = S5P6450_GPIO_R_NR,
+ .label = "GPR",
+ },
+ },
+};
+
+static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
+ {
+ .base = S5P64X0_GPF_BASE,
+ .config = &s5p64x0_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPF(0),
+ .ngpio = S5P6450_GPIO_F_NR,
+ .label = "GPF",
+ },
+ }, {
+ .base = S5P64X0_GPI_BASE,
+ .config = &s5p64x0_gpio_cfgs[3],
+ .chip = {
+ .base = S5P6450_GPI(0),
+ .ngpio = S5P6450_GPIO_I_NR,
+ .label = "GPI",
+ },
+ }, {
+ .base = S5P64X0_GPJ_BASE,
+ .config = &s5p64x0_gpio_cfgs[3],
+ .chip = {
+ .base = S5P6450_GPJ(0),
+ .ngpio = S5P6450_GPIO_J_NR,
+ .label = "GPJ",
+ },
+ }, {
+ .base = S5P64X0_GPN_BASE,
+ .config = &s5p64x0_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6450_GPN(0),
+ .ngpio = S5P6450_GPIO_N_NR,
+ .label = "GPN",
+ },
+ }, {
+ .base = S5P64X0_GPP_BASE,
+ .config = &s5p64x0_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPP(0),
+ .ngpio = S5P6450_GPIO_P_NR,
+ .label = "GPP",
+ },
+ }, {
+ .base = S5P6450_GPQ_BASE,
+ .config = &s5p64x0_gpio_cfgs[4],
+ .chip = {
+ .base = S5P6450_GPQ(0),
+ .ngpio = S5P6450_GPIO_Q_NR,
+ .label = "GPQ",
+ },
+ }, {
+ .base = S5P6450_GPS_BASE,
+ .config = &s5p64x0_gpio_cfgs[5],
+ .chip = {
+ .base = S5P6450_GPS(0),
+ .ngpio = S5P6450_GPIO_S_NR,
+ .label = "GPS",
+ },
+ },
+};
+
+void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chipcfg++) {
+ if (!chipcfg->set_config)
+ chipcfg->set_config = s3c_gpio_setcfg_s3c64xx_4bit;
+ if (!chipcfg->get_config)
+ chipcfg->get_config = s3c_gpio_getcfg_s3c64xx_4bit;
+ if (!chipcfg->set_pull)
+ chipcfg->set_pull = s3c_gpio_setpull_updown;
+ if (!chipcfg->get_pull)
+ chipcfg->get_pull = s3c_gpio_getpull_updown;
+ }
+}
+
+static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
+ int nr_chips)
+{
+ for (; nr_chips > 0; nr_chips--, chip++) {
+ chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
+ chip->chip.direction_output =
+ s5p64x0_gpiolib_rbank_4bit2_output;
+ s3c_gpiolib_add(chip);
+ }
+}
+
+static int __init s5p64x0_gpiolib_init(void)
+{
+ s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
+ ARRAY_SIZE(s5p64x0_gpio_cfgs));
+
+ if (soc_is_s5p6450()) {
+ samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
+ ARRAY_SIZE(s5p6450_gpio_2bit));
+
+ samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
+ ARRAY_SIZE(s5p6450_gpio_4bit));
+
+ samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
+ ARRAY_SIZE(s5p6450_gpio_4bit2));
+
+ s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
+ ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
+ } else {
+ samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
+ ARRAY_SIZE(s5p6440_gpio_2bit));
+
+ samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
+ ARRAY_SIZE(s5p6440_gpio_4bit));
+
+ samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
+ ARRAY_SIZE(s5p6440_gpio_4bit2));
+
+ s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
+ ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
+ }
+
+ return 0;
+}
+core_initcall(s5p64x0_gpiolib_init);
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e80ba3c6981
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -0,0 +1,33 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#include <plat/regs-serial.h>
+
+ .macro addruart, rp, rv, tmp
+ mov \rp, #0xE0000000
+ orr \rp, \rp, #0x00100000
+ ldr \rp, [\rp, #0x118 ]
+ and \rp, \rp, #0xff000
+ teq \rp, #0x50000 @@ S5P6450
+ ldreq \rp, =0xEC800000
+ movne \rp, #0xEC000000 @@ S5P6440
+ ldrne \rv, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h
new file mode 100644
index 00000000000..5a622af461d
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common common DMA API driver for PL330 */
+#include <plat/dma-pl330.h>
+
+#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
new file mode 100644
index 00000000000..fbb246d0a3d
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Low-level IRQ helper macros for the Samsung S5P64X0
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
new file mode 100644
index 00000000000..06cd3c9b16a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -0,0 +1,132 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+/* GPIO bank sizes */
+
+#define S5P6440_GPIO_A_NR (6)
+#define S5P6440_GPIO_B_NR (7)
+#define S5P6440_GPIO_C_NR (8)
+#define S5P6440_GPIO_F_NR (16)
+#define S5P6440_GPIO_G_NR (7)
+#define S5P6440_GPIO_H_NR (10)
+#define S5P6440_GPIO_I_NR (16)
+#define S5P6440_GPIO_J_NR (12)
+#define S5P6440_GPIO_N_NR (16)
+#define S5P6440_GPIO_P_NR (8)
+#define S5P6440_GPIO_R_NR (15)
+
+#define S5P6450_GPIO_A_NR (6)
+#define S5P6450_GPIO_B_NR (7)
+#define S5P6450_GPIO_C_NR (8)
+#define S5P6450_GPIO_D_NR (8)
+#define S5P6450_GPIO_F_NR (16)
+#define S5P6450_GPIO_G_NR (14)
+#define S5P6450_GPIO_H_NR (10)
+#define S5P6450_GPIO_I_NR (16)
+#define S5P6450_GPIO_J_NR (12)
+#define S5P6450_GPIO_K_NR (5)
+#define S5P6450_GPIO_N_NR (16)
+#define S5P6450_GPIO_P_NR (11)
+#define S5P6450_GPIO_Q_NR (14)
+#define S5P6450_GPIO_R_NR (15)
+#define S5P6450_GPIO_S_NR (8)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P64X0_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p6440_gpio_number {
+ S5P6440_GPIO_A_START = 0,
+ S5P6440_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_A),
+ S5P6440_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_B),
+ S5P6440_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_C),
+ S5P6440_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_F),
+ S5P6440_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_G),
+ S5P6440_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_H),
+ S5P6440_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_I),
+ S5P6440_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_J),
+ S5P6440_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_N),
+ S5P6440_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6440_GPIO_P),
+};
+
+enum s5p6450_gpio_number {
+ S5P6450_GPIO_A_START = 0,
+ S5P6450_GPIO_B_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_A),
+ S5P6450_GPIO_C_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_B),
+ S5P6450_GPIO_D_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_C),
+ S5P6450_GPIO_F_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_D),
+ S5P6450_GPIO_G_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_F),
+ S5P6450_GPIO_H_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_G),
+ S5P6450_GPIO_I_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_H),
+ S5P6450_GPIO_J_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_I),
+ S5P6450_GPIO_K_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_J),
+ S5P6450_GPIO_N_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_K),
+ S5P6450_GPIO_P_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_N),
+ S5P6450_GPIO_Q_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_P),
+ S5P6450_GPIO_R_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_Q),
+ S5P6450_GPIO_S_START = S5P64X0_GPIO_NEXT(S5P6450_GPIO_R),
+};
+
+/* GPIO number definitions */
+
+#define S5P6440_GPA(_nr) (S5P6440_GPIO_A_START + (_nr))
+#define S5P6440_GPB(_nr) (S5P6440_GPIO_B_START + (_nr))
+#define S5P6440_GPC(_nr) (S5P6440_GPIO_C_START + (_nr))
+#define S5P6440_GPF(_nr) (S5P6440_GPIO_F_START + (_nr))
+#define S5P6440_GPG(_nr) (S5P6440_GPIO_G_START + (_nr))
+#define S5P6440_GPH(_nr) (S5P6440_GPIO_H_START + (_nr))
+#define S5P6440_GPI(_nr) (S5P6440_GPIO_I_START + (_nr))
+#define S5P6440_GPJ(_nr) (S5P6440_GPIO_J_START + (_nr))
+#define S5P6440_GPN(_nr) (S5P6440_GPIO_N_START + (_nr))
+#define S5P6440_GPP(_nr) (S5P6440_GPIO_P_START + (_nr))
+#define S5P6440_GPR(_nr) (S5P6440_GPIO_R_START + (_nr))
+
+#define S5P6450_GPA(_nr) (S5P6450_GPIO_A_START + (_nr))
+#define S5P6450_GPB(_nr) (S5P6450_GPIO_B_START + (_nr))
+#define S5P6450_GPC(_nr) (S5P6450_GPIO_C_START + (_nr))
+#define S5P6450_GPD(_nr) (S5P6450_GPIO_D_START + (_nr))
+#define S5P6450_GPF(_nr) (S5P6450_GPIO_F_START + (_nr))
+#define S5P6450_GPG(_nr) (S5P6450_GPIO_G_START + (_nr))
+#define S5P6450_GPH(_nr) (S5P6450_GPIO_H_START + (_nr))
+#define S5P6450_GPI(_nr) (S5P6450_GPIO_I_START + (_nr))
+#define S5P6450_GPJ(_nr) (S5P6450_GPIO_J_START + (_nr))
+#define S5P6450_GPK(_nr) (S5P6450_GPIO_K_START + (_nr))
+#define S5P6450_GPN(_nr) (S5P6450_GPIO_N_START + (_nr))
+#define S5P6450_GPP(_nr) (S5P6450_GPIO_P_START + (_nr))
+#define S5P6450_GPQ(_nr) (S5P6450_GPIO_Q_START + (_nr))
+#define S5P6450_GPR(_nr) (S5P6450_GPIO_R_START + (_nr))
+#define S5P6450_GPS(_nr) (S5P6450_GPIO_S_START + (_nr))
+
+/* the end of the S5P64X0 specific gpios */
+
+#define S5P6440_GPIO_END (S5P6440_GPR(S5P6440_GPIO_R_NR) + 1)
+#define S5P6450_GPIO_END (S5P6450_GPS(S5P6450_GPIO_S_NR) + 1)
+
+#define S5P64X0_GPIO_END (S5P6440_GPIO_END > S5P6450_GPIO_END ? \
+ S5P6440_GPIO_END : S5P6450_GPIO_END)
+
+#define S3C_GPIO_END S5P64X0_GPIO_END
+
+/* define the number of gpios we need to the one after the last GPIO range */
+
+#define ARCH_NR_GPIOS (S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/hardware.h b/arch/arm/mach-s5p64x0/include/mach/hardware.h
new file mode 100644
index 00000000000..d3e87996dd9
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/hardware.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/include/mach/i2c.h
new file mode 100644
index 00000000000..887d25209e8
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/i2c.h
@@ -0,0 +1,17 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 I2C configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void s5p6440_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6440_i2c1_cfg_gpio(struct platform_device *dev);
+
+extern void s5p6450_i2c0_cfg_gpio(struct platform_device *dev);
+extern void s5p6450_i2c1_cfg_gpio(struct platform_device *dev);
diff --git a/arch/arm/mach-s5p64x0/include/mach/io.h b/arch/arm/mach-s5p64x0/include/mach/io.h
new file mode 100644
index 00000000000..a3e095c02fb
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/io.h
@@ -0,0 +1,25 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/io.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P64X0 based
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
new file mode 100644
index 00000000000..5b845e849b3
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -0,0 +1,150 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/irqs.h
+ *
+ * Copyright 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+
+#define IRQ_EINT0_3 S5P_IRQ_VIC0(0)
+#define IRQ_EINT4_11 S5P_IRQ_VIC0(1)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(2)
+#define IRQ_IIS1 S5P_IRQ_VIC0(3) /* for only S5P6450 */
+#define IRQ_IIS2 S5P_IRQ_VIC0(4) /* for only S5P6450 */
+#define IRQ_IIC1 S5P_IRQ_VIC0(5)
+#define IRQ_I2SV40 S5P_IRQ_VIC0(6)
+#define IRQ_GPS S5P_IRQ_VIC0(7) /* for only S5P6450 */
+
+#define IRQ_2D S5P_IRQ_VIC0(11)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(25)
+#define IRQ_WDT S5P_IRQ_VIC0(26)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(27)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(28)
+#define IRQ_DISPCON0 S5P_IRQ_VIC0(29)
+#define IRQ_DISPCON1 S5P_IRQ_VIC0(30)
+#define IRQ_DISPCON2 S5P_IRQ_VIC0(31)
+
+/* VIC1 */
+
+#define IRQ_EINT12_15 S5P_IRQ_VIC1(0)
+#define IRQ_PCM0 S5P_IRQ_VIC1(2)
+#define IRQ_PCM1 S5P_IRQ_VIC1(3) /* for only S5P6450 */
+#define IRQ_PCM2 S5P_IRQ_VIC1(4) /* for only S5P6450 */
+#define IRQ_UART0 S5P_IRQ_VIC1(5)
+#define IRQ_UART1 S5P_IRQ_VIC1(6)
+#define IRQ_UART2 S5P_IRQ_VIC1(7)
+#define IRQ_UART3 S5P_IRQ_VIC1(8)
+#define IRQ_DMA0 S5P_IRQ_VIC1(9)
+#define IRQ_UART4 S5P_IRQ_VIC1(10) /* S5P6450 */
+#define IRQ_UART5 S5P_IRQ_VIC1(11) /* S5P6450 */
+#define IRQ_NFC S5P_IRQ_VIC1(13)
+#define IRQ_USI S5P_IRQ_VIC1(15) /* S5P6450 */
+#define IRQ_SPI0 S5P_IRQ_VIC1(16)
+#define IRQ_SPI1 S5P_IRQ_VIC1(17)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(17) /* Shared */
+#define IRQ_IIC S5P_IRQ_VIC1(18)
+#define IRQ_DISPCON3 S5P_IRQ_VIC1(19)
+#define IRQ_EINT_GROUPS S5P_IRQ_VIC1(21)
+#define IRQ_PMU S5P_IRQ_VIC1(23) /* S5P6440 */
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(24)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(25)
+#define IRQ_OTG S5P_IRQ_VIC1(26)
+#define IRQ_DSI S5P_IRQ_VIC1(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC1(28)
+#define IRQ_TSI S5P_IRQ_VIC1(29)
+#define IRQ_PENDN S5P_IRQ_VIC1(30)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_ADC S5P_IRQ_VIC1(31)
+
+/* UART interrupts, S5P6450 has 5 UARTs */
+#define IRQ_S5P_UART_BASE4 (96)
+#define IRQ_S5P_UART_BASE5 (100)
+
+#define IRQ_S5P_UART_RX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX4 (IRQ_S5P_UART_BASE4 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR4 (IRQ_S5P_UART_BASE4 + UART_IRQ_ERR)
+
+#define IRQ_S5P_UART_RX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_RXD)
+#define IRQ_S5P_UART_TX5 (IRQ_S5P_UART_BASE5 + UART_IRQ_TXD)
+#define IRQ_S5P_UART_ERR5 (IRQ_S5P_UART_BASE5 + UART_IRQ_ERR)
+
+/* S3C compatibilty defines */
+#define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4
+#define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5
+
+#define IRQ_I2S0 IRQ_I2SV40
+
+#define IRQ_LCD_FIFO IRQ_DISPCON0
+#define IRQ_LCD_VSYNC IRQ_DISPCON1
+#define IRQ_LCD_SYSTEM IRQ_DISPCON2
+
+/* S5P6450 EINT feature will be added */
+
+/*
+ * Since the IRQ_EINT(x) are a linear mapping on s5p6440 we just defined
+ * them as an IRQ_EINT(x) macro from S5P_IRQ_EINT_BASE which we place
+ * after the pair of VICs.
+ */
+
+#define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6)
+
+#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
+
+#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE)
+/*
+ * S5P6440 has 0-15 external interrupts in group 0. Only these can be used
+ * to wake up from sleep. If request is beyond this range, by mistake, a large
+ * return value for an irq number should be indication of something amiss.
+ */
+#define S5P_EINT_BASE2 (0xf0000000)
+
+/*
+ * Next the external interrupt groups. These are similar to the IRQ_EINT(x)
+ * that they are sourced from the GPIO pins but with a different scheme for
+ * priority and source indication.
+ *
+ * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
+ * interrupts, but for historical reasons they are kept apart from these
+ * next interrupts.
+ *
+ * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
+ * machine specific support files.
+ */
+
+/* Actually, #6 and #7 are missing in the EINT_GROUP1 */
+#define IRQ_EINT_GROUP1_NR (15)
+#define IRQ_EINT_GROUP2_NR (8)
+#define IRQ_EINT_GROUP5_NR (7)
+#define IRQ_EINT_GROUP6_NR (10)
+/* Actually, #0, #1 and #2 are missing in the EINT_GROUP8 */
+#define IRQ_EINT_GROUP8_NR (11)
+
+#define IRQ_EINT_GROUP_BASE S5P_EINT(16)
+#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0)
+#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
+#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
+#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
+#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
+
+#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
+
+#define IRQ_TIMER_BASE (11)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
new file mode 100644
index 00000000000..0c0175dbfa3
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -0,0 +1,95 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/map.h
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P64X0_PA_SDRAM 0x20000000
+
+#define S5P64X0_PA_CHIPID 0xE0000000
+
+#define S5P64X0_PA_SYSCON 0xE0100000
+
+#define S5P64X0_PA_GPIO 0xE0308000
+
+#define S5P64X0_PA_VIC0 0xE4000000
+#define S5P64X0_PA_VIC1 0xE4100000
+
+#define S5P64X0_PA_SROMC 0xE7000000
+
+#define S5P64X0_PA_PDMA 0xE9000000
+
+#define S5P64X0_PA_TIMER 0xEA000000
+#define S5P64X0_PA_RTC 0xEA100000
+#define S5P64X0_PA_WDT 0xEA200000
+
+#define S5P6440_PA_IIC0 0xEC104000
+#define S5P6440_PA_IIC1 0xEC20F000
+#define S5P6450_PA_IIC0 0xEC100000
+#define S5P6450_PA_IIC1 0xEC200000
+
+#define S5P64X0_PA_SPI0 0xEC400000
+#define S5P64X0_PA_SPI1 0xEC500000
+
+#define S5P64X0_PA_HSOTG 0xED100000
+
+#define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000))
+
+#define S5P64X0_PA_FB 0xEE000000
+
+#define S5P64X0_PA_I2S 0xF2000000
+#define S5P6450_PA_I2S1 0xF2800000
+#define S5P6450_PA_I2S2 0xF2900000
+
+#define S5P64X0_PA_PCM 0xF2100000
+
+#define S5P64X0_PA_ADC 0xF3000000
+
+/* Compatibiltiy Defines */
+
+#define S3C_PA_HSMMC0 S5P64X0_PA_HSMMC(0)
+#define S3C_PA_HSMMC1 S5P64X0_PA_HSMMC(1)
+#define S3C_PA_HSMMC2 S5P64X0_PA_HSMMC(2)
+#define S3C_PA_IIC S5P6440_PA_IIC0
+#define S3C_PA_IIC1 S5P6440_PA_IIC1
+#define S3C_PA_RTC S5P64X0_PA_RTC
+#define S3C_PA_WDT S5P64X0_PA_WDT
+#define S3C_PA_FB S5P64X0_PA_FB
+#define S3C_PA_SPI0 S5P64X0_PA_SPI0
+#define S3C_PA_SPI1 S5P64X0_PA_SPI1
+
+#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
+#define S5P_PA_SROMC S5P64X0_PA_SROMC
+#define S5P_PA_SYSCON S5P64X0_PA_SYSCON
+#define S5P_PA_TIMER S5P64X0_PA_TIMER
+
+#define SAMSUNG_PA_ADC S5P64X0_PA_ADC
+
+/* UART */
+
+#define S5P6440_PA_UART(x) (0xEC000000 + ((x) * S3C_UART_OFFSET))
+#define S5P6450_PA_UART(x) ((x < 5) ? (0xEC800000 + ((x) * S3C_UART_OFFSET)) : (0xEC000000))
+
+#define S5P_PA_UART0 S5P6450_PA_UART(0)
+#define S5P_PA_UART1 S5P6450_PA_UART(1)
+#define S5P_PA_UART2 S5P6450_PA_UART(2)
+#define S5P_PA_UART3 S5P6450_PA_UART(3)
+#define S5P_PA_UART4 S5P6450_PA_UART(4)
+#define S5P_PA_UART5 S5P6450_PA_UART(5)
+
+#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/pm-core.h b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
new file mode 100644
index 00000000000..e52f7545d3a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/pm-core.h
@@ -0,0 +1,117 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/pm-core.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - PM core support for arch/arm/plat-samsung/pm.c
+ *
+ * Based on PM core support for S3C64XX by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ u32 tmp = __raw_readl(S5P64X0_CLK_GATE_PCLK);
+
+ /*
+ * As a note, since the S5P64X0 UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART0;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART1;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART2;
+ tmp |= S5P64X0_CLK_GATE_PCLK_UART3;
+
+ __raw_writel(tmp, S5P64X0_CLK_GATE_PCLK);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S5P64X0_EINT0PEND), S5P64X0_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void) { }
+static inline void s3c_pm_arch_show_resume_irqs(void) { }
+
+/*
+ * make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on
+ */
+#define s3c_irqwake_eintallow ((1 << 16) - 1)
+#define s3c_irqwake_intallow (~0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ u32 ucon = __raw_readl(regs + S3C2410_UCON);
+ u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+ u32 new_ucon;
+ u32 delta;
+
+ /*
+ * S5P64X0 UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settings.
+ */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /*
+ * We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /*
+ * change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0
+ */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /*
+ * as a precaution, don't change from
+ * PCLK2 => PCLK or vice-versa
+ */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
+
+static inline void s3c_pm_restored_gpios(void)
+{
+ /* ensure sleep mode has been cleared from the system */
+ __raw_writel(0, S5P64X0_SLPEN);
+}
+
+static inline void samsung_pm_saved_gpios(void)
+{
+ /*
+ * turn on the sleep mode and keep it there, as it seems that during
+ * suspend the xCON registers get re-set and thus you can end up with
+ * problems between going to sleep and resuming.
+ */
+ __raw_writel(S5P64X0_SLPEN_USE_xSLP, S5P64X0_SLPEN);
+}
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-clock.h b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
new file mode 100644
index 00000000000..bd91112c813
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P64X0_APLL_CON S5P_CLKREG(0x0C)
+#define S5P64X0_MPLL_CON S5P_CLKREG(0x10)
+#define S5P64X0_EPLL_CON S5P_CLKREG(0x14)
+#define S5P64X0_EPLL_CON_K S5P_CLKREG(0x18)
+
+#define S5P64X0_CLK_SRC0 S5P_CLKREG(0x1C)
+
+#define S5P64X0_CLK_DIV0 S5P_CLKREG(0x20)
+#define S5P64X0_CLK_DIV1 S5P_CLKREG(0x24)
+#define S5P64X0_CLK_DIV2 S5P_CLKREG(0x28)
+
+#define S5P64X0_CLK_GATE_HCLK0 S5P_CLKREG(0x30)
+#define S5P64X0_CLK_GATE_PCLK S5P_CLKREG(0x34)
+#define S5P64X0_CLK_GATE_SCLK0 S5P_CLKREG(0x38)
+#define S5P64X0_CLK_GATE_MEM0 S5P_CLKREG(0x3C)
+
+#define S5P64X0_CLK_DIV3 S5P_CLKREG(0x40)
+
+#define S5P64X0_CLK_GATE_HCLK1 S5P_CLKREG(0x44)
+#define S5P64X0_CLK_GATE_SCLK1 S5P_CLKREG(0x48)
+
+#define S5P6450_DPLL_CON S5P_CLKREG(0x50)
+#define S5P6450_DPLL_CON_K S5P_CLKREG(0x54)
+
+#define S5P64X0_AHB_CON0 S5P_CLKREG(0x100)
+#define S5P64X0_CLK_SRC1 S5P_CLKREG(0x10C)
+
+#define S5P64X0_SYS_ID S5P_CLKREG(0x118)
+#define S5P64X0_SYS_OTHERS S5P_CLKREG(0x11C)
+
+#define S5P64X0_PWR_CFG S5P_CLKREG(0x804)
+#define S5P64X0_EINT_WAKEUP_MASK S5P_CLKREG(0x808)
+#define S5P64X0_SLEEP_CFG S5P_CLKREG(0x818)
+#define S5P64X0_PWR_STABLE S5P_CLKREG(0x828)
+
+#define S5P64X0_OTHERS S5P_CLKREG(0x900)
+#define S5P64X0_WAKEUP_STAT S5P_CLKREG(0x908)
+
+#define S5P64X0_INFORM0 S5P_CLKREG(0xA00)
+
+#define S5P64X0_CLKDIV0_HCLK_SHIFT (8)
+#define S5P64X0_CLKDIV0_HCLK_MASK (0xF << S5P64X0_CLKDIV0_HCLK_SHIFT)
+
+/* HCLK GATE Registers */
+#define S5P64X0_CLK_GATE_HCLK1_FIMGVG (1 << 2)
+#define S5P64X0_CLK_GATE_SCLK1_FIMGVG (1 << 2)
+
+/* PCLK GATE Registers */
+#define S5P64X0_CLK_GATE_PCLK_UART3 (1 << 4)
+#define S5P64X0_CLK_GATE_PCLK_UART2 (1 << 3)
+#define S5P64X0_CLK_GATE_PCLK_UART1 (1 << 2)
+#define S5P64X0_CLK_GATE_PCLK_UART0 (1 << 1)
+
+#define S5P64X0_PWR_CFG_MMC1_DISABLE (1 << 15)
+#define S5P64X0_PWR_CFG_MMC0_DISABLE (1 << 14)
+#define S5P64X0_PWR_CFG_RTC_TICK_DISABLE (1 << 11)
+#define S5P64X0_PWR_CFG_RTC_ALRM_DISABLE (1 << 10)
+#define S5P64X0_PWR_CFG_WFI_MASK (3 << 5)
+#define S5P64X0_PWR_CFG_WFI_SLEEP (3 << 5)
+
+#define S5P64X0_SLEEP_CFG_OSC_EN (1 << 0)
+
+#define S5P64X0_PWR_STABLE_PWR_CNT_VAL4 (4 << 0)
+
+#define S5P6450_OTHERS_DISABLE_INT (1 << 31)
+#define S5P64X0_OTHERS_RET_UART (1 << 26)
+#define S5P64X0_OTHERS_RET_MMC1 (1 << 25)
+#define S5P64X0_OTHERS_RET_MMC0 (1 << 24)
+#define S5P64X0_OTHERS_USB_SIG_MASK (1 << 16)
+
+/* Compatibility defines */
+
+#define ARM_CLK_DIV S5P64X0_CLK_DIV0
+#define ARM_DIV_RATIO_SHIFT 0
+#define ARM_DIV_MASK (0xF << ARM_DIV_RATIO_SHIFT)
+
+#define S5P_EPLL_CON S5P64X0_EPLL_CON
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
new file mode 100644
index 00000000000..cfdfa4fdadf
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
@@ -0,0 +1,68 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - GPIO register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* Base addresses for each of the banks */
+
+#define S5P64X0_GPA_BASE (S5P_VA_GPIO + 0x0000)
+#define S5P64X0_GPB_BASE (S5P_VA_GPIO + 0x0020)
+#define S5P64X0_GPC_BASE (S5P_VA_GPIO + 0x0040)
+#define S5P64X0_GPF_BASE (S5P_VA_GPIO + 0x00A0)
+#define S5P64X0_GPG_BASE (S5P_VA_GPIO + 0x00C0)
+#define S5P64X0_GPH_BASE (S5P_VA_GPIO + 0x00E0)
+#define S5P64X0_GPI_BASE (S5P_VA_GPIO + 0x0100)
+#define S5P64X0_GPJ_BASE (S5P_VA_GPIO + 0x0120)
+#define S5P64X0_GPN_BASE (S5P_VA_GPIO + 0x0830)
+#define S5P64X0_GPP_BASE (S5P_VA_GPIO + 0x0160)
+#define S5P64X0_GPR_BASE (S5P_VA_GPIO + 0x0290)
+
+#define S5P6450_GPD_BASE (S5P_VA_GPIO + 0x0060)
+#define S5P6450_GPK_BASE (S5P_VA_GPIO + 0x0140)
+#define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180)
+#define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300)
+
+#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0)
+#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0)
+#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0)
+#define S5P64X0_SPCON1 (S5P_VA_GPIO + 0x2B0)
+
+#define S5P64X0_MEM0CONSLP0 (S5P_VA_GPIO + 0x1C0)
+#define S5P64X0_MEM0CONSLP1 (S5P_VA_GPIO + 0x1C4)
+#define S5P64X0_MEM0DRVCON (S5P_VA_GPIO + 0x1D0)
+#define S5P64X0_MEM1DRVCON (S5P_VA_GPIO + 0x1D4)
+
+#define S5P64X0_EINT12CON (S5P_VA_GPIO + 0x200)
+#define S5P64X0_EINT12FLTCON (S5P_VA_GPIO + 0x220)
+#define S5P64X0_EINT12MASK (S5P_VA_GPIO + 0x240)
+
+/* External interrupt control registers for group0 */
+
+#define EINT0CON0_OFFSET (0x900)
+#define EINT0FLTCON0_OFFSET (0x910)
+#define EINT0FLTCON1_OFFSET (0x914)
+#define EINT0MASK_OFFSET (0x920)
+#define EINT0PEND_OFFSET (0x924)
+
+#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET)
+#define S5P64X0_EINT0FLTCON0 (S5P_VA_GPIO + EINT0FLTCON0_OFFSET)
+#define S5P64X0_EINT0FLTCON1 (S5P_VA_GPIO + EINT0FLTCON1_OFFSET)
+#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET)
+#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET)
+
+#define S5P64X0_SLPEN (S5P_VA_GPIO + 0x930)
+#define S5P64X0_SLPEN_USE_xSLP (1 << 0)
+
+#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
new file mode 100644
index 00000000000..4aaebdace55
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
new file mode 100644
index 00000000000..ff85b4b6e8d
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for s5p64x0 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk clk_mout_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_mout_epll;
+
+extern int s5p64x0_epll_enable(struct clk *clk, int enable);
+extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
+
+extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk);
+extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate);
+extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate);
+
+extern struct clk_ops s5p64x0_clkarm_ops;
+
+extern struct clksrc_clk clk_armclk;
+extern struct clksrc_clk clk_dout_mpll;
+
+extern struct clk *clkset_hclk_low_list[];
+extern struct clksrc_sources clkset_hclk_low;
+
+extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk0_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_hclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
+
+extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
new file mode 100644
index 00000000000..170a20a9643
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
@@ -0,0 +1,20 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/spi-clocks.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ * Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+#define S5P64X0_SPI_SRCCLK_PCLK 0
+#define S5P64X0_SPI_SRCCLK_SCLK 1
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
new file mode 100644
index 00000000000..cf26e0954a2
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/system.h
@@ -0,0 +1,21 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
new file mode 100644
index 00000000000..00aa7f1d8e5
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
new file mode 100644
index 00000000000..4b91faa195a
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/timex.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S5P64X0 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+#define CLOCK_TICK_RATE 12000000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
new file mode 100644
index 00000000000..1608faf870f
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -0,0 +1,212 @@
+/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+
+/*
+ * cannot use commonly <plat/uncompress.h>
+ * because uart base of S5P6440 and S5P6450 is different
+ */
+
+typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
+
+/* uart setup */
+
+unsigned int fifo_mask;
+unsigned int fifo_max;
+
+/* forward declerations */
+
+static void arch_detect_cpu(void);
+
+/* defines for UART registers */
+
+#include <plat/regs-serial.h>
+#include <plat/regs-watchdog.h>
+
+/* working in physical space... */
+#undef S3C2410_WDOGREG
+#define S3C2410_WDOGREG(x) ((S3C24XX_PA_WATCHDOG + (x)))
+
+/* how many bytes we allow into the FIFO at a time in FIFO mode */
+#define FIFO_MAX (14)
+
+unsigned long uart_base;
+
+static __inline__ void get_uart_base(void)
+{
+ unsigned int chipid;
+
+ chipid = *(const volatile unsigned int __force *) 0xE0100118;
+
+ uart_base = S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT;
+
+ if ((chipid & 0xff000) == 0x50000)
+ uart_base += 0xEC800000;
+ else
+ uart_base += 0xEC000000;
+}
+
+static __inline__ void uart_wr(unsigned int reg, unsigned int val)
+{
+ volatile unsigned int *ptr;
+
+ get_uart_base();
+ ptr = (volatile unsigned int *)(reg + uart_base);
+ *ptr = val;
+}
+
+static __inline__ unsigned int uart_rd(unsigned int reg)
+{
+ volatile unsigned int *ptr;
+
+ get_uart_base();
+ ptr = (volatile unsigned int *)(reg + uart_base);
+ return *ptr;
+}
+
+/*
+ * we can deal with the case the UARTs are being run
+ * in FIFO mode, so that we don't hold up our execution
+ * waiting for tx to happen...
+ */
+
+static void putc(int ch)
+{
+ if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
+ int level;
+
+ while (1) {
+ level = uart_rd(S3C2410_UFSTAT);
+ level &= fifo_mask;
+
+ if (level < fifo_max)
+ break;
+ }
+
+ } else {
+ /* not using fifos */
+
+ while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
+ barrier();
+ }
+
+ /* write byte to transmission register */
+ uart_wr(S3C2410_UTXH, ch);
+}
+
+static inline void flush(void)
+{
+}
+
+#define __raw_writel(d, ad) \
+ do { \
+ *((volatile unsigned int __force *)(ad)) = (d); \
+ } while (0)
+
+/*
+ * CONFIG_S3C_BOOT_WATCHDOG
+ *
+ * Simple boot-time watchdog setup, to reboot the system if there is
+ * any problem with the boot process
+ */
+
+#ifdef CONFIG_S3C_BOOT_WATCHDOG
+
+#define WDOG_COUNT (0xff00)
+
+static inline void arch_decomp_wdog(void)
+{
+ __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+}
+
+static void arch_decomp_wdog_start(void)
+{
+ __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
+ __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
+ __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
+}
+
+#else
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+#ifdef CONFIG_S3C_BOOT_ERROR_RESET
+
+static void arch_decomp_error(const char *x)
+{
+ putstr("\n\n");
+ putstr(x);
+ putstr("\n\n -- System resetting\n");
+
+ __raw_writel(0x4000, S3C2410_WTDAT);
+ __raw_writel(0x4000, S3C2410_WTCNT);
+ __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
+
+ while(1);
+}
+
+#define arch_error arch_decomp_error
+#endif
+
+#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
+static inline void arch_enable_uart_fifo(void)
+{
+ u32 fifocon = uart_rd(S3C2410_UFCON);
+
+ if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
+ fifocon |= S3C2410_UFCON_RESETBOTH;
+ uart_wr(S3C2410_UFCON, fifocon);
+
+ /* wait for fifo reset to complete */
+ while (1) {
+ fifocon = uart_rd(S3C2410_UFCON);
+ if (!(fifocon & S3C2410_UFCON_RESETBOTH))
+ break;
+ }
+ }
+}
+#else
+#define arch_enable_uart_fifo() do { } while(0)
+#endif
+
+static void arch_decomp_setup(void)
+{
+ /*
+ * we may need to setup the uart(s) here if we are not running
+ * on an BAST... the BAST will have left the uarts configured
+ * after calling linux.
+ */
+
+ arch_detect_cpu();
+ arch_decomp_wdog_start();
+
+ /*
+ * Enable the UART FIFOs if they where not enabled and our
+ * configuration says we should turn them on.
+ */
+
+ arch_enable_uart_fifo();
+}
+
+
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
new file mode 100644
index 00000000000..3e6f2456ee9
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -0,0 +1,92 @@
+/* linux/arch/arm/mach-s5p64x0/irq-pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 - Interrupt handling Power Management
+ *
+ * Based on arch/arm/mach-s3c64xx/irq-pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/syscore_ops.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <plat/regs-serial.h>
+#include <plat/pm.h>
+
+#include <mach/regs-gpio.h>
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S5P64X0_EINT0CON0),
+ SAVE_ITEM(S5P64X0_EINT0FLTCON0),
+ SAVE_ITEM(S5P64X0_EINT0FLTCON1),
+ SAVE_ITEM(S5P64X0_EINT0MASK),
+};
+
+static struct irq_grp_save {
+ u32 con;
+ u32 fltcon;
+ u32 mask;
+} eint_grp_save[4];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s5p64x0_irq_pm_suspend(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ grp->con = __raw_readl(S5P64X0_EINT12CON + (i * 4));
+ grp->mask = __raw_readl(S5P64X0_EINT12MASK + (i * 4));
+ grp->fltcon = __raw_readl(S5P64X0_EINT12FLTCON + (i * 4));
+ }
+
+ return 0;
+}
+
+static void s5p64x0_irq_pm_resume(void)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ __raw_writel(grp->con, S5P64X0_EINT12CON + (i * 4));
+ __raw_writel(grp->mask, S5P64X0_EINT12MASK + (i * 4));
+ __raw_writel(grp->fltcon, S5P64X0_EINT12FLTCON + (i * 4));
+ }
+
+ S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+}
+
+static struct syscore_ops s5p64x0_irq_syscore_ops = {
+ .suspend = s5p64x0_irq_pm_suspend,
+ .resume = s5p64x0_irq_pm_resume,
+};
+
+static int __init s5p64x0_syscore_init(void)
+{
+ register_syscore_ops(&s5p64x0_irq_syscore_ops);
+
+ return 0;
+}
+core_initcall(s5p64x0_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
new file mode 100644
index 00000000000..a40e325d62c
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -0,0 +1,277 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6440.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+#include <linux/mmc/host.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+#include <plat/s5p-time.h>
+#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
+#include <plat/sdhci.h>
+
+#include "common.h"
+
+#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_TXTRIG16 | \
+ S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
+ },
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6440_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = {
+ .win[0] = &smdk6440_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6440_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6440_GPN(5), 1);
+ gpio_set_value(S5P6440_GPN(5), 0);
+ gpio_set_value(S5P6440_GPN(5), 1);
+ gpio_free(S5P6440_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6440_lcd_power_data = {
+ .set_power = smdk6440_lte480_reset_power,
+};
+
+static struct platform_device smdk6440_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6440_lcd_power_data,
+};
+
+static struct platform_device *smdk6440_devices[] __initdata = {
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_ts,
+ &s3c_device_wdt,
+ &samsung_asoc_dma,
+ &s5p6440_device_iis,
+ &s3c_device_fb,
+ &smdk6440_lcd_lte480wv,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+ .cfg_gpio = s5p6440_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6440_i2c1_data __initdata = {
+ .flags = 0,
+ .bus_num = 1,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+ .cfg_gpio = s5p6440_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6440_i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("24c08", 0x50), },
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
+};
+
+static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = {
+ /* To be populated */
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = {
+ .no = S5P6440_GPF(15),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk6440_bl_data = {
+ .pwm_id = 1,
+};
+
+static void __init smdk6440_map_io(void)
+{
+ s5p64x0_init_io(NULL, 0);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+}
+
+static void s5p6440_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
+static void __init smdk6440_machine_init(void)
+{
+ s3c24xx_ts_set_platdata(NULL);
+
+ s3c_i2c0_set_platdata(&s5p6440_i2c0_data);
+ s3c_i2c1_set_platdata(&s5p6440_i2c1_data);
+ i2c_register_board_info(0, smdk6440_i2c_devs0,
+ ARRAY_SIZE(smdk6440_i2c_devs0));
+ i2c_register_board_info(1, smdk6440_i2c_devs1,
+ ARRAY_SIZE(smdk6440_i2c_devs1));
+
+ samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data);
+
+ s5p6440_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+
+ s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
+
+ platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
+}
+
+MACHINE_START(SMDK6440, "SMDK6440")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+
+ .init_irq = s5p6440_init_irq,
+ .handle_irq = vic_handle_irq,
+ .map_io = smdk6440_map_io,
+ .init_machine = smdk6440_machine_init,
+ .timer = &s5p_timer,
+ .restart = s5p64x0_restart,
+MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
new file mode 100644
index 00000000000..efb69e2f2af
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -0,0 +1,296 @@
+/* linux/arch/arm/mach-s5p64x0/mach-smdk6450.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <linux/fb.h>
+#include <linux/mmc/host.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/hardware/vic.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/i2c.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+#include <plat/pll.h>
+#include <plat/adc.h>
+#include <plat/ts.h>
+#include <plat/s5p-time.h>
+#include <plat/backlight.h>
+#include <plat/fb.h>
+#include <plat/regs-fb.h>
+#include <plat/sdhci.h>
+
+#include "common.h"
+
+#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK6450_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define SMDK6450_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S3C2440_UFCON_TXTRIG16 | \
+ S3C2410_UFCON_RXTRIG8)
+
+static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = SMDK6450_UCON_DEFAULT,
+ .ulcon = SMDK6450_ULCON_DEFAULT,
+ .ufcon = SMDK6450_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = SMDK6450_UCON_DEFAULT,
+ .ulcon = SMDK6450_ULCON_DEFAULT,
+ .ufcon = SMDK6450_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = SMDK6450_UCON_DEFAULT,
+ .ulcon = SMDK6450_ULCON_DEFAULT,
+ .ufcon = SMDK6450_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = SMDK6450_UCON_DEFAULT,
+ .ulcon = SMDK6450_ULCON_DEFAULT,
+ .ufcon = SMDK6450_UFCON_DEFAULT,
+ },
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
+ [4] = {
+ .hwport = 4,
+ .flags = 0,
+ .ucon = SMDK6450_UCON_DEFAULT,
+ .ulcon = SMDK6450_ULCON_DEFAULT,
+ .ufcon = SMDK6450_UFCON_DEFAULT,
+ },
+#endif
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
+ [5] = {
+ .hwport = 5,
+ .flags = 0,
+ .ucon = SMDK6450_UCON_DEFAULT,
+ .ulcon = SMDK6450_ULCON_DEFAULT,
+ .ufcon = SMDK6450_UFCON_DEFAULT,
+ },
+#endif
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdk6450_fb_win0 = {
+ .win_mode = {
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 24,
+};
+
+static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = {
+ .win[0] = &smdk6450_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5p64x0_fb_gpio_setup_24bpp,
+};
+
+/* LCD power controller */
+static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ int err;
+
+ if (power) {
+ err = gpio_request(S5P6450_GPN(5), "GPN");
+ if (err) {
+ printk(KERN_ERR "failed to request GPN for lcd reset\n");
+ return;
+ }
+
+ gpio_direction_output(S5P6450_GPN(5), 1);
+ gpio_set_value(S5P6450_GPN(5), 0);
+ gpio_set_value(S5P6450_GPN(5), 1);
+ gpio_free(S5P6450_GPN(5));
+ }
+}
+
+static struct plat_lcd_data smdk6450_lcd_power_data = {
+ .set_power = smdk6450_lte480_reset_power,
+};
+
+static struct platform_device smdk6450_lcd_lte480wv = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdk6450_lcd_power_data,
+};
+
+static struct platform_device *smdk6450_devices[] __initdata = {
+ &s3c_device_adc,
+ &s3c_device_rtc,
+ &s3c_device_i2c0,
+ &s3c_device_i2c1,
+ &s3c_device_ts,
+ &s3c_device_wdt,
+ &samsung_asoc_dma,
+ &s5p6450_device_iis0,
+ &s3c_device_fb,
+ &smdk6450_lcd_lte480wv,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+ /* s5p6450_device_spi0 will be added */
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
+ .flags = 0,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+ .cfg_gpio = s5p6450_i2c0_cfg_gpio,
+};
+
+static struct s3c2410_platform_i2c s5p6450_i2c1_data __initdata = {
+ .flags = 0,
+ .bus_num = 1,
+ .slave_addr = 0x10,
+ .frequency = 100*1000,
+ .sda_delay = 100,
+ .cfg_gpio = s5p6450_i2c1_cfg_gpio,
+};
+
+static struct i2c_board_info smdk6450_i2c_devs0[] __initdata = {
+ { I2C_BOARD_INFO("wm8580", 0x1b), },
+ { I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung KS24C080C EEPROM */
+};
+
+static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = {
+ { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */
+};
+
+/* LCD Backlight data */
+static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = {
+ .no = S5P6450_GPF(15),
+ .func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk6450_bl_data = {
+ .pwm_id = 1,
+};
+
+static void __init smdk6450_map_io(void)
+{
+ s5p64x0_init_io(NULL, 0);
+ s3c24xx_init_clocks(19200000);
+ s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
+ s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+}
+
+static void s5p6450_set_lcd_interface(void)
+{
+ unsigned int cfg;
+
+ /* select TFT LCD type (RGB I/F) */
+ cfg = __raw_readl(S5P64X0_SPCON0);
+ cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK;
+ cfg |= S5P64X0_SPCON0_LCD_SEL_RGB;
+ __raw_writel(cfg, S5P64X0_SPCON0);
+}
+
+static void __init smdk6450_machine_init(void)
+{
+ s3c24xx_ts_set_platdata(NULL);
+
+ s3c_i2c0_set_platdata(&s5p6450_i2c0_data);
+ s3c_i2c1_set_platdata(&s5p6450_i2c1_data);
+ i2c_register_board_info(0, smdk6450_i2c_devs0,
+ ARRAY_SIZE(smdk6450_i2c_devs0));
+ i2c_register_board_info(1, smdk6450_i2c_devs1,
+ ARRAY_SIZE(smdk6450_i2c_devs1));
+
+ samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data);
+
+ s5p6450_set_lcd_interface();
+ s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+
+ s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
+
+ platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
+}
+
+MACHINE_START(SMDK6450, "SMDK6450")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .atag_offset = 0x100,
+
+ .init_irq = s5p6450_init_irq,
+ .handle_irq = vic_handle_irq,
+ .map_io = smdk6450_map_io,
+ .init_machine = smdk6450_machine_init,
+ .timer = &s5p_timer,
+ .restart = s5p64x0_restart,
+MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/pm.c b/arch/arm/mach-s5p64x0/pm.c
new file mode 100644
index 00000000000..9cba18bfe47
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/pm.c
@@ -0,0 +1,206 @@
+/* linux/arch/arm/mach-s5p64x0/pm.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * S5P64X0 Power Management Support
+ *
+ * Based on arch/arm/mach-s3c64xx/pm.c by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/regs-timer.h>
+#include <plat/wakeup-mask.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+
+static struct sleep_save s5p64x0_core_save[] = {
+ SAVE_ITEM(S5P64X0_APLL_CON),
+ SAVE_ITEM(S5P64X0_MPLL_CON),
+ SAVE_ITEM(S5P64X0_EPLL_CON),
+ SAVE_ITEM(S5P64X0_EPLL_CON_K),
+ SAVE_ITEM(S5P64X0_CLK_SRC0),
+ SAVE_ITEM(S5P64X0_CLK_SRC1),
+ SAVE_ITEM(S5P64X0_CLK_DIV0),
+ SAVE_ITEM(S5P64X0_CLK_DIV1),
+ SAVE_ITEM(S5P64X0_CLK_DIV2),
+ SAVE_ITEM(S5P64X0_CLK_DIV3),
+ SAVE_ITEM(S5P64X0_CLK_GATE_MEM0),
+ SAVE_ITEM(S5P64X0_CLK_GATE_HCLK1),
+ SAVE_ITEM(S5P64X0_CLK_GATE_SCLK1),
+};
+
+static struct sleep_save s5p64x0_misc_save[] = {
+ SAVE_ITEM(S5P64X0_AHB_CON0),
+ SAVE_ITEM(S5P64X0_SPCON0),
+ SAVE_ITEM(S5P64X0_SPCON1),
+ SAVE_ITEM(S5P64X0_MEM0CONSLP0),
+ SAVE_ITEM(S5P64X0_MEM0CONSLP1),
+ SAVE_ITEM(S5P64X0_MEM0DRVCON),
+ SAVE_ITEM(S5P64X0_MEM1DRVCON),
+
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+/* DPLL is present only in S5P6450 */
+static struct sleep_save s5p6450_core_save[] = {
+ SAVE_ITEM(S5P6450_DPLL_CON),
+ SAVE_ITEM(S5P6450_DPLL_CON_K),
+};
+
+void s3c_pm_configure_extint(void)
+{
+ __raw_writel(s3c_irqwake_eintmask, S5P64X0_EINT_WAKEUP_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+ __raw_writel(0, S5P64X0_EINT_WAKEUP_MASK);
+
+ s3c_pm_do_restore_core(s5p64x0_core_save,
+ ARRAY_SIZE(s5p64x0_core_save));
+
+ if (soc_is_s5p6450())
+ s3c_pm_do_restore_core(s5p6450_core_save,
+ ARRAY_SIZE(s5p6450_core_save));
+
+ s3c_pm_do_restore(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(s5p64x0_misc_save, ARRAY_SIZE(s5p64x0_misc_save));
+
+ if (soc_is_s5p6450())
+ s3c_pm_do_save(s5p6450_core_save,
+ ARRAY_SIZE(s5p6450_core_save));
+
+ s3c_pm_do_save(s5p64x0_core_save, ARRAY_SIZE(s5p64x0_core_save));
+}
+
+static int s5p64x0_cpu_suspend(unsigned long arg)
+{
+ unsigned long tmp = 0;
+
+ /*
+ * Issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case.
+ */
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" : : "r" (tmp));
+
+ /* we should never get past here */
+ panic("sleep resumed to originator?");
+}
+
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask s5p64x0_wake_irqs[] = {
+ { .irq = IRQ_RTC_ALARM, .bit = S5P64X0_PWR_CFG_RTC_ALRM_DISABLE, },
+ { .irq = IRQ_RTC_TIC, .bit = S5P64X0_PWR_CFG_RTC_TICK_DISABLE, },
+ { .irq = IRQ_HSMMC0, .bit = S5P64X0_PWR_CFG_MMC0_DISABLE, },
+ { .irq = IRQ_HSMMC1, .bit = S5P64X0_PWR_CFG_MMC1_DISABLE, },
+};
+
+static void s5p64x0_pm_prepare(void)
+{
+ u32 tmp;
+
+ samsung_sync_wakemask(S5P64X0_PWR_CFG,
+ s5p64x0_wake_irqs, ARRAY_SIZE(s5p64x0_wake_irqs));
+
+ /* store the resume address in INFORM0 register */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S5P64X0_INFORM0);
+
+ /* setup clock gating for FIMGVG block */
+ __raw_writel((__raw_readl(S5P64X0_CLK_GATE_HCLK1) | \
+ (S5P64X0_CLK_GATE_HCLK1_FIMGVG)), S5P64X0_CLK_GATE_HCLK1);
+ __raw_writel((__raw_readl(S5P64X0_CLK_GATE_SCLK1) | \
+ (S5P64X0_CLK_GATE_SCLK1_FIMGVG)), S5P64X0_CLK_GATE_SCLK1);
+
+ /* Configure the stabilization counter with wait time required */
+ __raw_writel(S5P64X0_PWR_STABLE_PWR_CNT_VAL4, S5P64X0_PWR_STABLE);
+
+ /* set WFI to SLEEP mode configuration */
+ tmp = __raw_readl(S5P64X0_SLEEP_CFG);
+ tmp &= ~(S5P64X0_SLEEP_CFG_OSC_EN);
+ __raw_writel(tmp, S5P64X0_SLEEP_CFG);
+
+ tmp = __raw_readl(S5P64X0_PWR_CFG);
+ tmp &= ~(S5P64X0_PWR_CFG_WFI_MASK);
+ tmp |= S5P64X0_PWR_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S5P64X0_PWR_CFG);
+
+ /*
+ * set OTHERS register to disable interrupt before going to
+ * sleep. This bit is present only in S5P6450, it is reserved
+ * in S5P6440.
+ */
+ if (soc_is_s5p6450()) {
+ tmp = __raw_readl(S5P64X0_OTHERS);
+ tmp |= S5P6450_OTHERS_DISABLE_INT;
+ __raw_writel(tmp, S5P64X0_OTHERS);
+ }
+
+ /* ensure previous wakeup state is cleared before sleeping */
+ __raw_writel(__raw_readl(S5P64X0_WAKEUP_STAT), S5P64X0_WAKEUP_STAT);
+
+}
+
+static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+ pm_cpu_prep = s5p64x0_pm_prepare;
+ pm_cpu_sleep = s5p64x0_cpu_suspend;
+ pm_uart_udivslot = 1;
+
+ return 0;
+}
+
+static struct subsys_interface s5p64x0_pm_interface = {
+ .name = "s5p64x0_pm",
+ .subsys = &s5p64x0_subsys,
+ .add_dev = s5p64x0_pm_add,
+};
+
+static __init int s5p64x0_pm_drvinit(void)
+{
+ s3c_pm_init();
+
+ return subsys_interface_register(&s5p64x0_pm_interface);
+}
+arch_initcall(s5p64x0_pm_drvinit);
+
+static void s5p64x0_pm_resume(void)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(S5P64X0_OTHERS);
+ tmp |= (S5P64X0_OTHERS_RET_MMC0 | S5P64X0_OTHERS_RET_MMC1 | \
+ S5P64X0_OTHERS_RET_UART);
+ __raw_writel(tmp , S5P64X0_OTHERS);
+}
+
+static struct syscore_ops s5p64x0_pm_syscore_ops = {
+ .resume = s5p64x0_pm_resume,
+};
+
+static __init int s5p64x0_pm_syscore_init(void)
+{
+ register_syscore_ops(&s5p64x0_pm_syscore_ops);
+
+ return 0;
+}
+arch_initcall(s5p64x0_pm_syscore_init);
diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
new file mode 100644
index 00000000000..f346ee4af54
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Base S5P64X0 GPIO setup information for LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+
+void s5p64x0_fb_gpio_setup_24bpp(void)
+{
+ if (soc_is_s5p6440()) {
+ s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2));
+ } else if (soc_is_s5p6450()) {
+ s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2));
+ }
+}
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
new file mode 100644
index 00000000000..46b463917c5
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/mach-s5p64x0/setup-i2c0.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * I2C0 GPIO configuration.
+ *
+ * Based on plat-s3c64x0/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+#include <mach/i2c.h>
+
+void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
+
+void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
new file mode 100644
index 00000000000..6ad3b986021
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/mach-s5p64xx/setup-i2c1.c
+ *
+ * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * I2C1 GPIO configuration.
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+
+#include <mach/i2c.h>
+
+void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
+
+void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
+}
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
new file mode 100644
index 00000000000..8410af0d12b
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
+#include <plat/cpu.h>
+
+void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPG pins to special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+
+ /* Set GPG[6] pin to special-function 2 - MMC0 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (soc_is_s5p6450()) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
+ }
+ }
+}
+
+void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
+
+ switch (width) {
+ case 8:
+ /* Set data pins GPH[6:9] special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ case 4:
+ /* set data pins GPH[2:5] special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ default:
+ break;
+ }
+
+ /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (soc_is_s5p6450()) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
+ }
+ }
+}
+
+void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
+
+ /* Set data pins GPH[6:9] pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
+}
+
+void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
new file mode 100644
index 00000000000..e9b84124035
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-spi.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/mach-s5p64x0/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x1ff,
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ else
+ s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ else
+ s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif