summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-clps711x
diff options
context:
space:
mode:
authorAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
committerAnton Arapov <anton@redhat.com>2012-04-16 10:05:28 +0200
commitb4b6116a13633898cf868f2f103c96a90c4c20f8 (patch)
tree93d1b7e2cfcdf473d8d4ff3ad141fa864f8491f6 /arch/arm/mach-clps711x
parentedd4be777c953e5faafc80d091d3084b4343f5d3 (diff)
downloadkernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.gz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.tar.xz
kernel-uprobes-b4b6116a13633898cf868f2f103c96a90c4c20f8.zip
fedora kernel: d9aad82f3319f3cfd1aebc01234254ef0c37ad84v3.3.2-1
Signed-off-by: Anton Arapov <anton@redhat.com>
Diffstat (limited to 'arch/arm/mach-clps711x')
-rw-r--r--arch/arm/mach-clps711x/Kconfig77
-rw-r--r--arch/arm/mach-clps711x/Makefile20
-rw-r--r--arch/arm/mach-clps711x/Makefile.boot6
-rw-r--r--arch/arm/mach-clps711x/autcpu12.c73
-rw-r--r--arch/arm/mach-clps711x/cdb89712.c63
-rw-r--r--arch/arm/mach-clps711x/ceiva.c64
-rw-r--r--arch/arm/mach-clps711x/clep7312.c46
-rw-r--r--arch/arm/mach-clps711x/common.c227
-rw-r--r--arch/arm/mach-clps711x/common.h12
-rw-r--r--arch/arm/mach-clps711x/edb7211-arch.c66
-rw-r--r--arch/arm/mach-clps711x/edb7211-mm.c81
-rw-r--r--arch/arm/mach-clps711x/fortunet.c82
-rw-r--r--arch/arm/mach-clps711x/include/mach/autcpu12.h78
-rw-r--r--arch/arm/mach-clps711x/include/mach/debug-macro.S45
-rw-r--r--arch/arm/mach-clps711x/include/mach/entry-macro.S58
-rw-r--r--arch/arm/mach-clps711x/include/mach/hardware.h208
-rw-r--r--arch/arm/mach-clps711x/include/mach/io.h36
-rw-r--r--arch/arm/mach-clps711x/include/mach/irqs.h53
-rw-r--r--arch/arm/mach-clps711x/include/mach/memory.h78
-rw-r--r--arch/arm/mach-clps711x/include/mach/syspld.h121
-rw-r--r--arch/arm/mach-clps711x/include/mach/system.h35
-rw-r--r--arch/arm/mach-clps711x/include/mach/time.h49
-rw-r--r--arch/arm/mach-clps711x/include/mach/timex.h23
-rw-r--r--arch/arm/mach-clps711x/include/mach/uncompress.h59
-rw-r--r--arch/arm/mach-clps711x/p720t-leds.c67
-rw-r--r--arch/arm/mach-clps711x/p720t.c123
26 files changed, 1850 insertions, 0 deletions
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
new file mode 100644
index 00000000000..eb34bd1251d
--- /dev/null
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -0,0 +1,77 @@
+if ARCH_CLPS711X
+
+menu "CLPS711X/EP721X Implementations"
+
+config ARCH_AUTCPU12
+ bool "AUTCPU12"
+ help
+ Say Y if you intend to run the kernel on the autronix autcpu12
+ board. This board is based on a Cirrus Logic CS89712.
+
+config ARCH_CDB89712
+ bool "CDB89712"
+ select ISA
+ help
+ This is an evaluation board from Cirrus for the CS89712 processor.
+ The board includes 2 serial ports, Ethernet, IRDA, and expansion
+ headers. It comes with 16 MB SDRAM and 8 MB flash ROM.
+
+config ARCH_CEIVA
+ bool "CEIVA"
+ help
+ Say Y here if you intend to run this kernel on the Ceiva/Polaroid
+ PhotoMax Digital Picture Frame.
+
+config ARCH_CLEP7312
+ bool "CLEP7312"
+ help
+ Boards based on the Cirrus Logic 7212/7312 chips.
+
+config ARCH_EDB7211
+ bool "EDB7211"
+ select ISA
+ select ARCH_SPARSEMEM_ENABLE
+ select ARCH_SELECT_MEMORY_MODEL
+ help
+ Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
+ evaluation board.
+
+config ARCH_P720T
+ bool "P720T"
+ help
+ Say Y here if you intend to run this kernel on the ARM Prospector
+ 720T.
+
+config ARCH_FORTUNET
+ bool "FORTUNET"
+
+# XXX Maybe these should indicate register compatibility
+# instead of being mutually exclusive.
+config ARCH_EP7211
+ bool
+ depends on ARCH_EDB7211
+ default y
+
+config ARCH_EP7212
+ bool
+ depends on ARCH_P720T || ARCH_CEIVA
+ default y
+
+config EP72XX_ROM_BOOT
+ bool "EP72xx ROM boot"
+ depends on ARCH_EP7211 || ARCH_EP7212
+ ---help---
+ If you say Y here, your CLPS711x-based kernel will use the bootstrap
+ mode memory map instead of the normal memory map.
+
+ Processors derived from the Cirrus CLPS-711X core support two boot
+ modes. Normal mode boots from the external memory device at CS0.
+ Bootstrap mode rearranges parts of the memory map, placing an
+ internal 128 byte bootstrap ROM at CS0. This option performs the
+ address map changes required to support booting in this mode.
+
+ You almost surely want to say N here.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
new file mode 100644
index 00000000000..f2f0256232e
--- /dev/null
+++ b/arch/arm/mach-clps711x/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := common.o
+obj-m :=
+obj-n :=
+obj- :=
+
+obj-$(CONFIG_ARCH_CEIVA) += ceiva.o
+obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
+obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
+obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
+obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
+obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
+obj-$(CONFIG_ARCH_P720T) += p720t.o
+leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
+obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot
new file mode 100644
index 00000000000..9398e859b5a
--- /dev/null
+++ b/arch/arm/mach-clps711x/Makefile.boot
@@ -0,0 +1,6 @@
+# The standard locations for stuff on CLPS711x type processors
+ zreladdr-y += 0xc0028000
+params_phys-y := 0xc0000100
+# Should probably have some agreement on these...
+initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000
+initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
new file mode 100644
index 00000000000..3fb79a1d0bd
--- /dev/null
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -0,0 +1,73 @@
+/*
+ * linux/arch/arm/mach-clps711x/autcpu12.c
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/sizes.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+
+#include <asm/mach/map.h>
+#include <mach/autcpu12.h>
+
+#include "common.h"
+
+/*
+ * The on-chip registers are given a size of 1MB so that a section can
+ * be used to map them; this saves a page table. This is the place to
+ * add mappings for ROM, expansion memory, PCMCIA, etc. (if static
+ * mappings are chosen for those areas).
+ *
+*/
+
+static struct map_desc autcpu12_io_desc[] __initdata = {
+ /* memory-mapped extra io and CS8900A Ethernet chip */
+ /* ethernet chip */
+ {
+ .virtual = AUTCPU12_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
+};
+
+void __init autcpu12_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc));
+}
+
+MACHINE_START(AUTCPU12, "autronix autcpu12")
+ /* Maintainer: Thomas Gleixner */
+ .atag_offset = 0x20000,
+ .map_io = autcpu12_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
new file mode 100644
index 00000000000..c314f49d6ef
--- /dev/null
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -0,0 +1,63 @@
+/*
+ * linux/arch/arm/mach-clps711x/cdb89712.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+/*
+ * Map the CS89712 Ethernet port. That should be moved to the
+ * ethernet driver, perhaps.
+ */
+static struct map_desc cdb89712_io_desc[] __initdata = {
+ {
+ .virtual = ETHER_BASE,
+ .pfn =__phys_to_pfn(ETHER_START),
+ .length = ETHER_SIZE,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init cdb89712_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(cdb89712_io_desc, ARRAY_SIZE(cdb89712_io_desc));
+}
+
+MACHINE_START(CDB89712, "Cirrus-CDB89712")
+ /* Maintainer: Ray Lehtiniemi */
+ .atag_offset = 0x100,
+ .map_io = cdb89712_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
new file mode 100644
index 00000000000..a70147e347a
--- /dev/null
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/mach-clps711x/arch-ceiva.c
+ *
+ * Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <linux/kernel.h>
+
+#include <mach/hardware.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+#include "common.h"
+
+static struct map_desc ceiva_io_desc[] __initdata = {
+ /* SED1355 controlled video RAM & registers */
+ {
+ .virtual = CEIVA_VIRT_SED1355,
+ .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355),
+ .length = SZ_2M,
+ .type = MT_DEVICE
+ }
+};
+
+
+static void __init ceiva_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc));
+}
+
+
+MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
+ /* Maintainer: Rob Scott */
+ .atag_offset = 0x100,
+ .map_io = ceiva_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
new file mode 100644
index 00000000000..dbc7842639d
--- /dev/null
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/arm/mach-clps711x/clep7312.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static void __init
+fixup_clep7312(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ mi->nr_banks=1;
+ mi->bank[0].start = 0xc0000000;
+ mi->bank[0].size = 0x01000000;
+}
+
+
+MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
+ /* Maintainer: Nobody */
+ .atag_offset = 0x0100,
+ .fixup = fixup_clep7312,
+ .map_io = clps711x_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
new file mode 100644
index 00000000000..ab1711b9b4d
--- /dev/null
+++ b/arch/arm/mach-clps711x/common.c
@@ -0,0 +1,227 @@
+/*
+ * linux/arch/arm/mach-clps711x/core.c
+ *
+ * Core support for the CLPS711x-based machines.
+ *
+ * Copyright (C) 2001,2011 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/timex.h>
+
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/clps7111.h>
+
+/*
+ * This maps the generic CLPS711x registers
+ */
+static struct map_desc clps711x_io_desc[] __initdata = {
+ {
+ .virtual = CLPS7111_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
+};
+
+void __init clps711x_map_io(void)
+{
+ iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
+}
+
+static void int1_mask(struct irq_data *d)
+{
+ u32 intmr1;
+
+ intmr1 = clps_readl(INTMR1);
+ intmr1 &= ~(1 << d->irq);
+ clps_writel(intmr1, INTMR1);
+}
+
+static void int1_ack(struct irq_data *d)
+{
+ u32 intmr1;
+
+ intmr1 = clps_readl(INTMR1);
+ intmr1 &= ~(1 << d->irq);
+ clps_writel(intmr1, INTMR1);
+
+ switch (d->irq) {
+ case IRQ_CSINT: clps_writel(0, COEOI); break;
+ case IRQ_TC1OI: clps_writel(0, TC1EOI); break;
+ case IRQ_TC2OI: clps_writel(0, TC2EOI); break;
+ case IRQ_RTCMI: clps_writel(0, RTCEOI); break;
+ case IRQ_TINT: clps_writel(0, TEOI); break;
+ case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
+ }
+}
+
+static void int1_unmask(struct irq_data *d)
+{
+ u32 intmr1;
+
+ intmr1 = clps_readl(INTMR1);
+ intmr1 |= 1 << d->irq;
+ clps_writel(intmr1, INTMR1);
+}
+
+static struct irq_chip int1_chip = {
+ .irq_ack = int1_ack,
+ .irq_mask = int1_mask,
+ .irq_unmask = int1_unmask,
+};
+
+static void int2_mask(struct irq_data *d)
+{
+ u32 intmr2;
+
+ intmr2 = clps_readl(INTMR2);
+ intmr2 &= ~(1 << (d->irq - 16));
+ clps_writel(intmr2, INTMR2);
+}
+
+static void int2_ack(struct irq_data *d)
+{
+ u32 intmr2;
+
+ intmr2 = clps_readl(INTMR2);
+ intmr2 &= ~(1 << (d->irq - 16));
+ clps_writel(intmr2, INTMR2);
+
+ switch (d->irq) {
+ case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
+ }
+}
+
+static void int2_unmask(struct irq_data *d)
+{
+ u32 intmr2;
+
+ intmr2 = clps_readl(INTMR2);
+ intmr2 |= 1 << (d->irq - 16);
+ clps_writel(intmr2, INTMR2);
+}
+
+static struct irq_chip int2_chip = {
+ .irq_ack = int2_ack,
+ .irq_mask = int2_mask,
+ .irq_unmask = int2_unmask,
+};
+
+void __init clps711x_init_irq(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ if (INT1_IRQS & (1 << i)) {
+ irq_set_chip_and_handler(i, &int1_chip,
+ handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+ if (INT2_IRQS & (1 << i)) {
+ irq_set_chip_and_handler(i, &int2_chip,
+ handle_level_irq);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+
+ /*
+ * Disable interrupts
+ */
+ clps_writel(0, INTMR1);
+ clps_writel(0, INTMR2);
+
+ /*
+ * Clear down any pending interrupts
+ */
+ clps_writel(0, COEOI);
+ clps_writel(0, TC1EOI);
+ clps_writel(0, TC2EOI);
+ clps_writel(0, RTCEOI);
+ clps_writel(0, TEOI);
+ clps_writel(0, UMSEOI);
+ clps_writel(0, SYNCIO);
+ clps_writel(0, KBDEOI);
+}
+
+/*
+ * gettimeoffset() returns time since last timer tick, in usecs.
+ *
+ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * 'tick' is usecs per jiffy.
+ */
+static unsigned long clps711x_gettimeoffset(void)
+{
+ unsigned long hwticks;
+ hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */
+ return (hwticks * (tick_nsec / 1000)) / LATCH;
+}
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id)
+{
+ timer_tick();
+ return IRQ_HANDLED;
+}
+
+static struct irqaction clps711x_timer_irq = {
+ .name = "CLPS711x Timer Tick",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = p720t_timer_interrupt,
+};
+
+static void __init clps711x_timer_init(void)
+{
+ struct timespec tv;
+ unsigned int syscon;
+
+ syscon = clps_readl(SYSCON1);
+ syscon |= SYSCON1_TC2S | SYSCON1_TC2M;
+ clps_writel(syscon, SYSCON1);
+
+ clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */
+
+ setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
+
+ tv.tv_nsec = 0;
+ tv.tv_sec = clps_readl(RTCDR);
+ do_settimeofday(&tv);
+}
+
+struct sys_timer clps711x_timer = {
+ .init = clps711x_timer_init,
+ .offset = clps711x_gettimeoffset,
+};
+
+void clps711x_restart(char mode, const char *cmd)
+{
+ soft_restart(0);
+}
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
new file mode 100644
index 00000000000..fc0f0650dcb
--- /dev/null
+++ b/arch/arm/mach-clps711x/common.h
@@ -0,0 +1,12 @@
+/*
+ * linux/arch/arm/mach-clps711x/common.h
+ *
+ * Common bits.
+ */
+
+struct sys_timer;
+
+extern void clps711x_map_io(void);
+extern void clps711x_init_irq(void);
+extern struct sys_timer clps711x_timer;
+extern void clps711x_restart(char mode, const char *cmd);
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
new file mode 100644
index 00000000000..5fad0b4f40a
--- /dev/null
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -0,0 +1,66 @@
+/*
+ * linux/arch/arm/mach-clps711x/arch-edb7211.c
+ *
+ * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/memblock.h>
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+extern void edb7211_map_io(void);
+
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+ memblock_reserve(PHYS_OFFSET, 0x00020000);
+}
+
+static void __init
+fixup_edb7211(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ /*
+ * Bank start addresses are not present in the information
+ * passed in from the boot loader. We could potentially
+ * detect them, but instead we hard-code them.
+ *
+ * Banks sizes _are_ present in the param block, but we're
+ * not using that information yet.
+ */
+ mi->bank[0].start = 0xc0000000;
+ mi->bank[0].size = 8*1024*1024;
+ mi->bank[1].start = 0xc1000000;
+ mi->bank[1].size = 8*1024*1024;
+ mi->nr_banks = 2;
+}
+
+MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
+ /* Maintainer: Jon McClintock */
+ .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */
+ .fixup = fixup_edb7211,
+ .map_io = edb7211_map_io,
+ .reserve = edb7211_reserve,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
new file mode 100644
index 00000000000..0bea1454ae0
--- /dev/null
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -0,0 +1,81 @@
+/*
+ * linux/arch/arm/mach-clps711x/mm.c
+ *
+ * Extra MM routines for the EDB7211 board
+ *
+ * Copyright (C) 2000, 2001 Blue Mug, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <mach/hardware.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/map.h>
+
+extern void clps711x_map_io(void);
+
+/*
+ * The on-chip registers are given a size of 1MB so that a section can
+ * be used to map them; this saves a page table. This is the place to
+ * add mappings for ROM, expansion memory, PCMCIA, etc. (if static
+ * mappings are chosen for those areas).
+ *
+ * Here is a physical memory map (to be fleshed out later):
+ *
+ * Physical Address Size Description
+ * ----------------- ----- ---------------------------------
+ * c0000000-c001ffff 128KB reserved for video RAM [1]
+ * c0020000-c0023fff 16KB parameters (see Documentation/arm/Setup)
+ * c0024000-c0027fff 16KB swapper_pg_dir (task 0 page directory)
+ * c0028000-... kernel image (TEXTADDR)
+ *
+ * [1] Unused pages should be given back to the VM; they are not yet.
+ * The parameter block should also be released (not sure if this
+ * happens).
+ */
+static struct map_desc edb7211_io_desc[] __initdata = {
+ { /* memory-mapped extra keyboard row */
+ .virtual = EP7211_VIRT_EXTKBD,
+ .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, { /* and CS8900A Ethernet chip */
+ .virtual = EP7211_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, { /* flash banks */
+ .virtual = EP7211_VIRT_FLASH1,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
+ .length = SZ_8M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = EP7211_VIRT_FLASH2,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
+ .length = SZ_8M,
+ .type = MT_DEVICE,
+ }
+};
+
+void __init edb7211_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(edb7211_io_desc, ARRAY_SIZE(edb7211_io_desc));
+}
+
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
new file mode 100644
index 00000000000..3a3f0b702cb
--- /dev/null
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -0,0 +1,82 @@
+/*
+ * linux/arch/arm/mach-clps711x/fortunet.c
+ *
+ * Derived from linux/arch/arm/mach-integrator/arch.c
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/initrd.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+
+#include <asm/memory.h>
+
+#include "common.h"
+
+struct meminfo memmap = {
+ .nr_banks = 1,
+ .bank = {
+ {
+ .start = 0xC0000000,
+ .size = 0x01000000,
+ },
+ },
+};
+
+typedef struct tag_IMAGE_PARAMS
+{
+ int ramdisk_ok;
+ int ramdisk_address;
+ int ramdisk_size;
+ int ram_size;
+ int extra_param_type;
+ int extra_param_ptr;
+ int command_line;
+} IMAGE_PARAMS;
+
+#define IMAGE_PARAMS_PHYS 0xC01F0000
+
+static void __init
+fortunet_fixup(struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+ IMAGE_PARAMS *ip = phys_to_virt(IMAGE_PARAMS_PHYS);
+ *cmdline = phys_to_virt(ip->command_line);
+#ifdef CONFIG_BLK_DEV_INITRD
+ if(ip->ramdisk_ok)
+ {
+ initrd_start = __phys_to_virt(ip->ramdisk_address);
+ initrd_end = initrd_start + ip->ramdisk_size;
+ }
+#endif
+ memmap.bank[0].size = ip->ram_size;
+ *mi = memmap;
+}
+
+MACHINE_START(FORTUNET, "ARM-FortuNet")
+ /* Maintainer: FortuNet Inc. */
+ .fixup = fortunet_fixup,
+ .map_io = clps711x_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
new file mode 100644
index 00000000000..1588a365f61
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -0,0 +1,78 @@
+/*
+ * AUTCPU12 specific defines
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_AUTCPU12_H
+#define __ASM_ARCH_AUTCPU12_H
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2
+ * (nCS2). This is the mapping for it.
+ */
+#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */
+#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */
+
+/*
+ * The flash bank is wired to chip select 0
+ */
+#define AUTCPU12_PHYS_FLASH CS0_PHYS_BASE /* physical */
+
+/* offset for device specific information structure */
+#define AUTCPU12_LCDINFO_OFFS (0x00010000)
+/*
+* Videomemory is the internal SRAM (CS 6)
+*/
+#define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE
+#define AUTCPU12_VIRT_VIDEO (0xfd000000)
+
+/*
+* All special IO's are tied to CS1
+*/
+#define AUTCPU12_PHYS_CHAR_LCD CS1_PHYS_BASE +0x00000000 /* physical */
+
+#define AUTCPU12_PHYS_NVRAM CS1_PHYS_BASE +0x02000000 /* physical */
+
+#define AUTCPU12_PHYS_CSAUX1 CS1_PHYS_BASE +0x04000000 /* physical */
+
+#define AUTCPU12_PHYS_SMC CS1_PHYS_BASE +0x06000000 /* physical */
+
+#define AUTCPU12_PHYS_CAN CS1_PHYS_BASE +0x08000000 /* physical */
+
+#define AUTCPU12_PHYS_TOUCH CS1_PHYS_BASE +0x0A000000 /* physical */
+
+#define AUTCPU12_PHYS_IO CS1_PHYS_BASE +0x0C000000 /* physical */
+
+#define AUTCPU12_PHYS_LPT CS1_PHYS_BASE +0x0E000000 /* physical */
+
+/*
+* defines for smartmedia card access
+*/
+#define AUTCPU12_SMC_RDY (1<<2)
+#define AUTCPU12_SMC_ALE (1<<3)
+#define AUTCPU12_SMC_CLE (1<<4)
+#define AUTCPU12_SMC_PORT_OFFSET PBDR
+#define AUTCPU12_SMC_SELECT_OFFSET 0x10
+/*
+* defines for lcd contrast
+*/
+#define AUTCPU12_DPOT_PORT_OFFSET PEDR
+#define AUTCPU12_DPOT_CS (1<<0)
+#define AUTCPU12_DPOT_CLK (1<<1)
+#define AUTCPU12_DPOT_UD (1<<2)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 00000000000..b802e8a5183
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,45 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+ .macro addruart, rp, rv, tmp
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+ mov \rp, #0x0000 @ UART1
+#else
+ mov \rp, #0x1000 @ UART2
+#endif
+ orr \rv, \rp, #CLPS7111_VIRT_BASE
+ orr \rp, \rp, #CLPS7111_PHYS_BASE
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0480] @ UARTDR
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
+ tst \rd, #1 << 11 @ UBUSYx
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+ tst \rx, #0x1000 @ UART2 does not have CTS here
+ bne 1002f
+1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx
+ tst \rd, #1 << 8 @ CTS
+ bne 1001b
+1002:
+ .endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
new file mode 100644
index 00000000000..90fa2f70489
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+ .macro get_irqnr_and_base, irqnr, stat, base, mask
+ mov \base, #CLPS7111_BASE
+ ldr \stat, [\base, #INTSR1]
+ ldr \mask, [\base, #INTMR1]
+ mov \irqnr, #4
+ mov \mask, \mask, lsl #16
+ and \stat, \stat, \mask, lsr #16
+ movs \stat, \stat, lsr #4
+ bne 1001f
+
+ add \base, \base, #INTSR2 - INTSR1
+ ldr \stat, [\base, #INTSR1]
+ ldr \mask, [\base, #INTMR1]
+ mov \irqnr, #16
+ mov \mask, \mask, lsl #16
+ and \stat, \stat, \mask, lsr #16
+
+1001: tst \stat, #255
+ addeq \irqnr, \irqnr, #8
+ moveq \stat, \stat, lsr #8
+ tst \stat, #15
+ addeq \irqnr, \irqnr, #4
+ moveq \stat, \stat, lsr #4
+ tst \stat, #3
+ addeq \irqnr, \irqnr, #2
+ moveq \stat, \stat, lsr #2
+ tst \stat, #1
+ addeq \irqnr, \irqnr, #1
+ moveq \stat, \stat, lsr #1
+ tst \stat, #1 @ bit 0 should be set
+ .endm
+
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 00000000000..d0b7d870be9
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,208 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ * This file contains the hardware definitions of the Prospector P720T.
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define CLPS7111_VIRT_BASE 0xff000000
+#define CLPS7111_BASE CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors. CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE (0x00000000)
+#define CS1_PHYS_BASE (0x10000000)
+#define CS2_PHYS_BASE (0x20000000)
+#define CS3_PHYS_BASE (0x30000000)
+#define CS4_PHYS_BASE (0x40000000)
+#define CS5_PHYS_BASE (0x50000000)
+#define CS6_PHYS_BASE (0x60000000)
+#define CS7_PHYS_BASE (0x70000000)
+#else
+#define CS0_PHYS_BASE (0x70000000)
+#define CS1_PHYS_BASE (0x60000000)
+#define CS2_PHYS_BASE (0x50000000)
+#define CS3_PHYS_BASE (0x40000000)
+#define CS4_PHYS_BASE (0x30000000)
+#define CS5_PHYS_BASE (0x20000000)
+#define CS6_PHYS_BASE (0x10000000)
+#define CS7_PHYS_BASE (0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE CLPS7111_VIRT_BASE
+#define EP7211_BASE CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE CLPS7111_VIRT_BASE
+#define EP7212_BASE CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE 0xfe000000
+#define SYSPLD_BASE SYSPLD_VIRT_BASE
+
+#if defined (CONFIG_ARCH_AUTCPU12)
+
+#define CS89712_VIRT_BASE CLPS7111_VIRT_BASE
+#define CS89712_BASE CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START 0x80000000
+#define REGISTER_SIZE 0x4000
+#define REGISTER_BASE 0xff000000
+
+#define ETHER_START 0x20000000
+#define ETHER_SIZE 0x1000
+#define ETHER_BASE 0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3)
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */
+
+#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */
+
+#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
+#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
+
+#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */
+#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN (1<<1)
+#define EDB_PD2_LCDEN (1<<2)
+#define EDB_PD3_LCDBL (1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define CEIVA_VIRT_BASE CLPS7111_VIRT_BASE
+#define CEIVA_BASE CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */
+#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */
+
+#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */
+#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */
+
+#define CEIVA_FLASH_SIZE 0x100000
+#define CEIVA_FLASH_WIDTH 2
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355 (0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST (1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN (1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL (1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN (1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN (1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
new file mode 100644
index 00000000000..2e0b3ced8f0
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/io.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+/*
+ * We don't support ins[lb]/outs[lb]. Make them fault.
+ */
+#define __raw_readsb(p,d,l) do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l) do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l) do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l) do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
new file mode 100644
index 00000000000..30b7e97285a
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT 4
+#define IRQ_EINT1 5
+#define IRQ_EINT2 6
+#define IRQ_EINT3 7
+#define IRQ_TC1OI 8
+#define IRQ_TC2OI 9
+#define IRQ_RTCMI 10
+#define IRQ_TINT 11
+#define IRQ_UTXINT1 12
+#define IRQ_URXINT1 13
+#define IRQ_UMSINT 14
+#define IRQ_SSEOTI 15
+
+#define INT1_IRQS (0x0000fff0)
+#define INT1_ACK_IRQS (0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT (16+0) /* bit 0 */
+#define IRQ_SS2RX (16+1) /* bit 1 */
+#define IRQ_SS2TX (16+2) /* bit 2 */
+#define IRQ_UTXINT2 (16+12) /* bit 12 */
+#define IRQ_URXINT2 (16+13) /* bit 13 */
+
+#define INT2_IRQS (0x30070000)
+#define INT2_ACK_IRQS (0x00010000)
+
+#define NR_IRQS 30
+
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 00000000000..3a032a67725
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
+
+#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET)
+#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET)
+#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks. In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory. In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1). However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation. Assuming all memory nodes have equal access
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are
+ * incidentally the same as virtual addresses.
+ *
+ * node 0: 0xc0000000 - 0xc7ffffff
+ * node 1: 0xc8000000 - 0xcfffffff
+ * node 2: 0xd0000000 - 0xd7ffffff
+ * node 3: 0xd8000000 - 0xdfffffff
+ */
+#define SECTION_SIZE_BITS 24
+#define MAX_PHYSMEM_BITS 32
+
+#endif
+
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
new file mode 100644
index 00000000000..f7f4c120189
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/syspld.h
+ *
+ * System Control PLD register definitions.
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE (0x10000000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off))
+#else
+#define SYSPLD_REG(type,off) (off)
+#endif
+
+#define PLD_INT SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ (1 << 5)
+#define PLD_INT_UCB_IRQ (1 << 1)
+#define PLD_INT_KBD_ATN (1 << 0) /* EINT1 */
+
+#define PLD_PWR SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT (1 << 5)
+#define PLD_PWR_MODE (1 << 4) /* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON (1 << 3) /* LCD bias voltage enable */
+#define PLD_S3_ON (1 << 2) /* LCD backlight enable */
+#define PLD_S2_ON (1 << 1) /* LCD 3V3 supply enable */
+#define PLD_S1_ON (1 << 0) /* LCD 3V supply enable */
+
+#define PLD_KBD SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE (1 << 1)
+#define PLD_KBD_EN (1 << 0)
+
+#define PLD_SPI SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN (1 << 0)
+
+#define PLD_IO SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL (1 << 6) /* boot sel switch */
+#define PLD_IO_USER (1 << 5) /* user defined switch */
+#define PLD_IO_LED3 (1 << 4)
+#define PLD_IO_LED2 (1 << 3)
+#define PLD_IO_LED1 (1 << 2)
+#define PLD_IO_LED0 (1 << 1)
+#define PLD_IO_LEDEN (1 << 0)
+
+#define PLD_IRDA SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN (1 << 0)
+
+#define PLD_COM2 SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN (1 << 0)
+
+#define PLD_COM1 SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN (1 << 0)
+
+#define PLD_AUD SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1 (1 << 6)
+#define PLD_AUD_DIV0 (1 << 5)
+#define PLD_AUD_CLK_SEL1 (1 << 4)
+#define PLD_AUD_CLK_SEL0 (1 << 3)
+#define PLD_AUD_MIC_PWR (1 << 2)
+#define PLD_AUD_MIC_GAIN (1 << 1)
+#define PLD_AUD_CODEC_EN (1 << 0)
+
+#define PLD_CF SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP (1 << 5)
+#define PLD_CF1_SLEEP (1 << 4)
+#define PLD_CF2_nPDREQ (1 << 3)
+#define PLD_CF1_nPDREQ (1 << 2)
+#define PLD_CF2_nIRQ (1 << 1)
+#define PLD_CF1_nIRQ (1 << 0)
+
+#define PLD_SDC SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN (1 << 2)
+#define PLD_SDC_WP (1 << 1)
+#define PLD_SDC_CD (1 << 0)
+
+#define PLD_FPGA SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3 (1 << 4)
+#define PLD_CODEC_IRQ2 (1 << 3)
+#define PLD_CODEC_IRQ1 (1 << 2)
+#define PLD_CODEC_EN (1 << 0)
+
+#define PLD_BRITE SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP (1 << 1)
+#define PLD_BRITE_DN (1 << 0)
+
+#define PLD_LCDEN SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN (1 << 0)
+
+#define PLD_ID SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ (1 << 1)
+#define PLD_TCH_EN (1 << 0)
+
+#define PLD_GPIO SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2 (1 << 2)
+#define PLD_GPIO1 (1 << 1)
+#define PLD_GPIO0 (1 << 0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
new file mode 100644
index 00000000000..23d6ef8c84d
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/system.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+static inline void arch_idle(void)
+{
+ clps_writel(1, HALT);
+ __asm__ __volatile__(
+ "mov r0, r0\n\
+ mov r0, r0");
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
new file mode 100644
index 00000000000..61fef9129c6
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/time.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ do_leds();
+ xtime_update(1);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ do_profile(regs);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+ clps711x_setup_timer();
+ timer_irq.handler = p720t_timer_interrupt;
+ setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 00000000000..ac8823ccff9
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/timex.h
+ *
+ * Prospector 720T architecture timex specifications
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 00000000000..7164310dea7
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define __raw_readl(p) (*(unsigned long *)(p))
+#define __raw_writel(v,p) (*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx SYSFLG2
+#define UARTDRx UARTDR2
+#else
+#define SYSFLGx SYSFLG1
+#define UARTDRx UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+ while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+ barrier();
+ clps_writel(c, UARTDRx);
+}
+
+static inline void flush(void)
+{
+ while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+ barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
new file mode 100644
index 00000000000..15121446efc
--- /dev/null
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -0,0 +1,67 @@
+/*
+ * linux/arch/arm/mach-clps711x/leds.c
+ *
+ * Integrator LED control routines
+ *
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+static void p720t_leds_event(led_event_t ledevt)
+{
+ unsigned long flags;
+ u32 pddr;
+
+ local_irq_save(flags);
+ switch(ledevt) {
+ case led_idle_start:
+ break;
+
+ case led_idle_end:
+ break;
+
+ case led_timer:
+ pddr = clps_readb(PDDR);
+ clps_writeb(pddr ^ 1, PDDR);
+ break;
+
+ default:
+ break;
+ }
+
+ local_irq_restore(flags);
+}
+
+static int __init leds_init(void)
+{
+ if (machine_is_p720t())
+ leds_event = p720t_leds_event;
+
+ return 0;
+}
+
+arch_initcall(leds_init);
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
new file mode 100644
index 00000000000..42ee8f33eaf
--- /dev/null
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-clps711x/p720t.c
+ *
+ * Copyright (C) 2000-2001 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/sizes.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/syspld.h>
+
+#include "common.h"
+
+/*
+ * Map the P720T system PLD. It occupies two address spaces:
+ * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000
+ * We map both here.
+ */
+static struct map_desc p720t_io_desc[] __initdata = {
+ {
+ .virtual = SYSPLD_VIRT_BASE,
+ .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfe400000,
+ .pfn = __phys_to_pfn(0x10400000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
+};
+
+static void __init
+fixup_p720t(struct tag *tag, char **cmdline, struct meminfo *mi)
+{
+ /*
+ * Our bootloader doesn't setup any tags (yet).
+ */
+ if (tag->hdr.tag != ATAG_CORE) {
+ tag->hdr.tag = ATAG_CORE;
+ tag->hdr.size = tag_size(tag_core);
+ tag->u.core.flags = 0;
+ tag->u.core.pagesize = PAGE_SIZE;
+ tag->u.core.rootdev = 0x0100;
+
+ tag = tag_next(tag);
+ tag->hdr.tag = ATAG_MEM;
+ tag->hdr.size = tag_size(tag_mem32);
+ tag->u.mem.size = 4096;
+ tag->u.mem.start = PHYS_OFFSET;
+
+ tag = tag_next(tag);
+ tag->hdr.tag = ATAG_NONE;
+ tag->hdr.size = 0;
+ }
+}
+
+static void __init p720t_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc));
+}
+
+MACHINE_START(P720T, "ARM-Prospector720T")
+ /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+ .atag_offset = 0x100,
+ .fixup = fixup_p720t,
+ .map_io = p720t_map_io,
+ .init_irq = clps711x_init_irq,
+ .timer = &clps711x_timer,
+ .restart = clps711x_restart,
+MACHINE_END
+
+static int p720t_hw_init(void)
+{
+ /*
+ * Power down as much as possible in case we don't
+ * have the drivers loaded.
+ */
+ PLD_LCDEN = 0;
+ PLD_PWR &= ~(PLD_S4_ON|PLD_S3_ON|PLD_S2_ON|PLD_S1_ON);
+
+ PLD_KBD = 0;
+ PLD_IO = 0;
+ PLD_IRDA = 0;
+ PLD_CODEC = 0;
+ PLD_TCH = 0;
+ PLD_SPI = 0;
+#ifndef CONFIG_DEBUG_LL
+ PLD_COM2 = 0;
+ PLD_COM1 = 0;
+#endif
+
+ return 0;
+}
+
+__initcall(p720t_hw_init);
+