summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/ge_bx50v3.h17
-rw-r--r--include/configs/imx7-cm.h110
-rw-r--r--include/configs/imx8mm-cl-iot-gate.h196
-rw-r--r--include/configs/imx8mm_icore_mx8mm.h100
-rw-r--r--include/configs/imx8mq_cm.h104
-rw-r--r--include/configs/mx53ppd.h18
-rw-r--r--include/pci.h8
7 files changed, 532 insertions, 21 deletions
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 2d854af9a0..c8e9d3b17f 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -92,12 +92,12 @@
"swappartitions=" \
"setexpr partnum 3 - ${partnum}\0" \
"failbootcmd=" \
- "echo reached failbootcmd; " \
"cls; " \
"setcurs 5 4; " \
"lcdputs \"Monitor failed to start. " \
"Try again, or contact GE Service for support.\"; " \
- "bootcount reset; \0" \
+ "bootcount reset; " \
+ "while true; do sleep 1; done; \0" \
"altbootcmd=" \
"run doquiet; " \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
@@ -115,23 +115,16 @@
"tryboot=" \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
"run loadimage || run swappartitions && run loadimage || " \
- "setenv partnum 0 && echo MISSING IMAGE;" \
+ "setenv partnum 0 && echo MISSING IMAGE;" \
"run doboot; " \
"run failbootcmd\0" \
#define CONFIG_MMCBOOTCOMMAND \
- "if mmc dev ${devnum}; then " \
- "run doquiet; " \
- "run tryboot; " \
- "fi; " \
-
-#define CONFIG_USBBOOTCOMMAND \
- "echo Unsupported; " \
+ "run doquiet; " \
+ "run tryboot; " \
#ifdef CONFIG_CMD_NFS
#define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
-#elif CONFIG_CMD_USB
-#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
#else
#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
#endif
diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h
new file mode 100644
index 0000000000..4a3706d996
--- /dev/null
+++ b/include/configs/imx7-cm.h
@@ -0,0 +1,110 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2021 Ronetix GmbH
+ *
+ * Configuration settings for the Ronetix's iMX7-CM System-on-Module.
+ */
+
+#ifndef __IMX7_CM_CONFIG_H
+#define __IMX7_CM_CONFIG_H
+
+#include "mx7_common.h"
+
+#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
+
+#define CONFIG_ETHPRIME "FEC"
+
+#undef CONFIG_SYS_AUTOLOAD
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CONFIG_BOOTCOMMAND
+
+/*
+ * Use:
+ * boot-mode=mix
+ * boot-mode=sd
+ * boot-mode=net
+ */
+#define MY_CONFIG_BOOT_MODE "boot-mode=sd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ MY_CONFIG_BOOT_MODE \
+ "image=zImage\0" \
+ "console=ttymxc0\0" \
+ "fdt_file=imx7-cm.dtb\0" \
+ "fdt_addr=0x83000000\0" \
+ "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ \
+ "bootsd=" \
+ "echo Booting from SD card ...; " \
+ "run mmcargs; " \
+ "mmc dev ${mmcdev};" \
+ "run loadimage; " \
+ "run loadfdt; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "\0" \
+ \
+ "bootmix=" \
+ "echo Boot Kernel and FDT from TFTP, RootFs from SD card ...; " \
+ "run mmcargs; " \
+ "mmc dev ${mmcdev};" \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "tftp ${image}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "\0" \
+ \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
+ "\0" \
+ "bootnet=" \
+ "echo Booting from net ...; " \
+ "run netargs; " \
+ "tftp ${image}; " \
+ "tftp ${fdt_addr} ${fdt_file}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "\0"
+
+#define CONFIG_BOOTCOMMAND "run boot${boot-mode}"
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_HZ 1000
+
+/* Physical Memory Map */
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* MMC Config*/
+#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
+#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
+
+/* USB Configs */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+
+#define CONFIG_USBD_HS
+
+/* SPL */
+#include "imx7_spl.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
new file mode 100644
index 0000000000..faeee2178c
--- /dev/null
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __IMX8MM_CL_IOT_GATE_H
+#define __IMX8MM_CL_IOT_GATE_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
+#define CONFIG_SPL_MAX_SIZE (148 * 1024)
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+#define CONFIG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK 0x920000
+#define CONFIG_SPL_BSS_START_ADDR 0x910000
+#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x912000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_MMC)
+# define BOOT_TARGET_MMC(func) \
+ func(MMC, mmc, 2) \
+ func(MMC, mmc, 0)
+#else
+# define BOOT_TARGET_MMC(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_USB)
+# define BOOT_TARGET_USB(func) func(USB, usb, 0)
+#else
+# define BOOT_TARGET_USB(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_PXE)
+# define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
+#else
+# define BOOT_TARGET_PXE(func)
+#endif
+
+#if CONFIG_IS_ENABLED(CMD_DHCP)
+# define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
+#else
+# define BOOT_TARGET_DHCP(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_USB(func) \
+ BOOT_TARGET_MMC(func) \
+ BOOT_TARGET_PXE(func) \
+ BOOT_TARGET_DHCP(func)
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ "script=boot.scr\0" \
+ "image=Image\0" \
+ "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200\0" \
+ "fdt_addr=0x43000000\0" \
+ "fdt_addr_r=0x43000000\0" \
+ "boot_fit=no\0" \
+ "dfu_alt_info=mmc 2=flash-bin raw 0x42 0x250 mmcpart 1;" \
+ "u-boot-itb raw 0x300 0x1B00 mmcpart 1\0" \
+ "fdt_file=sb-iotgimx8.dtb\0" \
+ "fdtfile=sb-iotgimx8.dtb\0" \
+ "initrd_addr=0x43800000\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcautodetect=yes\0" \
+ "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+ "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "kernel_addr_r=0x40480000\0" \
+ "pxefile_addr_r=0x40480000\0" \
+ "ramdisk_addr_r=0x43800000\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
+ "bootm ${loadaddr}; " \
+ "else " \
+ "if run loadfdt; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${loadaddr} ${image}; " \
+ "if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
+ "bootm ${loadaddr}; " \
+ "else " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "booti ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi;\0"
+
+#ifndef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "fi;"
+#endif
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x40480000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN SZ_32M
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
+
+#define CONFIG_MXC_UART_BASE UART3_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* USDHC */
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#define CONFIG_SYS_I2C_SPEED 100000
+
+#define CONFIG_ETHPRIME "FEC"
+
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_FEC_MXC_PHYADDR 0
+#define FEC_QUIRK_ENET_MAC
+
+#define IMX_FEC_BASE 0x30BE0000
+
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+#endif /*__IMX8MM_CL_IOT_GATE_H*/
diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h
new file mode 100644
index 0000000000..af5be6889d
--- /dev/null
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -0,0 +1,100 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+#ifndef __IMX8MM_ICORE_MX8MM_H
+#define __IMX8MM_ICORE_MX8MM_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SPL_MAX_SIZE (148 * 1024)
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+#define CONFIG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+# define CONFIG_SPL_STACK 0x920000
+# define CONFIG_SPL_BSS_START_ADDR 0x910000
+# define CONFIG_SPL_BSS_MAX_SIZE SZ_8K
+# define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+# define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+# define CONFIG_MALLOC_F_ADDR 0x930000
+/* For RAW image gives a error info not panic */
+# define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#endif /* CONFIG_SPL_BUILD */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
+
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 2) \
+ func(MMC, mmc, 0)
+#include <config_distro_bootcmd.h>
+#undef CONFIG_ISO_PARTITION
+#else
+#define BOOTENV
+#endif
+
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "fdt_addr_r=0x44000000\0" \
+ "kernel_addr_r=0x42000000\0" \
+ "ramdisk_addr_r=0x46400000\0" \
+ "scriptaddr=0x46000000\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ ENV_MEM_LAYOUT_SETTINGS \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "console=ttymxc1,115200\0" \
+ BOOTENV
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x40480000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN SZ_32M
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+
+/* SDRAM configuration */
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
+#define CONFIG_SYS_BOOTM_LEN SZ_256M
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END \
+ (CONFIG_SYS_MEMTEST_START + (PHYS_SDRAM_SIZE >> 1))
+
+/* UART */
+#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 2048
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* USDHC */
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+/* I2C */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+#endif /* __IMX8MM_ICORE_MX8MM_H */
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
new file mode 100644
index 0000000000..9db3bd5f58
--- /dev/null
+++ b/include/configs/imx8mq_cm.h
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __IMX8M_CM_H
+#define __IMX8M_CM_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
+
+#define CONFIG_SPL_MAX_SIZE (124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK 0x187FF0
+#define CONFIG_SPL_BSS_START_ADDR 0x00180000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
+#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x182000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+/* ENET Config */
+/* ENET1 */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_ETHPRIME "FEC"
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 0) \
+ func(MMC, mmc, 1) \
+ func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+#endif
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ "scriptaddr=0x43500000\0" \
+ "kernel_addr_r=0x40880000\0" \
+ "image=Image\0" \
+ "console=ttymxc0,115200\0" \
+ "fdt_addr=0x43000000\0" \
+ "boot_fdt=try\0" \
+ "fdt_file=imx8mq-cm.dtb\0" \
+ "initrd_addr=0x43800000\0" \
+ "bootm_size=0x10000000\0" \
+ "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+
+/* Link Definitions */
+#define CONFIG_LOADADDR 0x40480000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE 0x40000000 /* 1 GB DDR */
+
+#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_IMX_BOOTAUX
+
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+
+#endif
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index d3133293c6..b1e6a5638b 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -64,23 +64,25 @@
"vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
"rootwait ${bootargs}\0" \
- "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
- "then setenv quiet; fi\0" \
+ "doquiet=" \
+ "if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
+ "then setenv quiet; fi\0" \
"hasfirstboot=" \
"test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
- "swappartitions=setexpr partnum 3 - ${partnum}\0" \
+ "swappartitions=" \
+ "setexpr partnum 3 - ${partnum}\0" \
"failbootcmd=" \
"cls; " \
"setcurs 5 4; " \
"lcdputs \"Monitor failed to start. " \
"Try again, or contact GE Service for support.\"; " \
- "bootcount reset; \0" \
+ "bootcount reset; " \
+ "while true; do sleep 1; done; \0" \
"altbootcmd=" \
"run doquiet; " \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
"run hasfirstboot || setenv partnum 0; " \
"if test ${partnum} != 0; then " \
- "setenv bootcause REVERT; " \
"run swappartitions loadimage doboot; " \
"fi; " \
"run failbootcmd\0" \
@@ -101,10 +103,8 @@
"lcd:800x480-24@60,monitor=lcd\0" \
#define CONFIG_MMCBOOTCOMMAND \
- "if mmc dev ${devnum}; then " \
- "run doquiet; " \
- "run tryboot; " \
- "fi; " \
+ "run doquiet; " \
+ "run tryboot; " \
#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
diff --git a/include/pci.h b/include/pci.h
index 5f36537b72..2353cebb2a 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -1690,6 +1690,14 @@ int sandbox_pci_get_emul(const struct udevice *bus, pci_dev_t find_devfn,
*/
int sandbox_pci_get_client(struct udevice *emul, struct udevice **devp);
+/**
+ * board_pci_fixup_dev() - Board callback for PCI device fixups
+ *
+ * @bus: PCI bus
+ * @dev: PCI device
+ */
+extern void board_pci_fixup_dev(struct udevice *bus, struct udevice *dev);
+
#endif /* CONFIG_DM_PCI */
/**
generated by cgit (git 2.34.1) at 2024-06-11 11:26:19 +0000